E-flite EFLDF321 Rotor, 5-Blade Owner's Manual

Add to my manuals

advertisement

E-flite EFLDF321 Rotor, 5-Blade Owner's Manual | Manualzz

Delta-V 32 80mm EDF Instructions

Thank you for purchasing the E-flite Delta-V 32 80mm EDF (EFLDF32). This electric ducted fan unit is an ideal choice for products such as E-flite’s Habu 32 DF and other similar sized ducted fan airplanes. The Delta-V 32 80mm EDF is also an ideal choice for ducted fan airplanes requiring 80mm diameter fan units. The BL32 Ducted Fan Brushless Motor, 2150Kv (EFLM3032DFA) is purposebuilt for this Delta-V 32 80mm EDF and both products will provide great performance.

Delta-V 32 80mm EDF Features:

• High-performance, efficient design with quick assembly time

• Injection molded, high strength fiberglass-filled Polyphenylene Sulfide [PPS] plastic

• Factory-balanced 80mm 5-blade rotor design

• Aluminum collet with integrated spinner designed for motors with 5mm shaft

• Includes center body fairing to reduce drag

• Designed for 28mm diameter motors

• Purpose-built for recommended E-flite BL32 Ducted Fan Brushless Motors

Delta-V 32 80mm EDF Specifications

Rotor Diameter: 80.0mm (3.15 in)

Shroud Outside Diameter: 83.0mm (3.25 in)

Shroud Length: 66.0mm (2.60 in)

Shroud Length (Including Intake Ring): 82.0mm (3.20 in)

Motor Casing Diameter: 28.3mm (1.10 in)

Overall Weight: 116 g (4.10 oz)

Delta-V 32 80mm EDF Performance

Installed Data*

Installed Static Thrust: 4.50 lbs

RPM: 38,500

Watts: 1,400

Current: 62A

* Data measured installed in Habu 32 DF using BL32 DF Brushless Motor, 2150Kv & 6S 5000mAh 30C Battery (EFLB50006S30)

Static Data*

Static Thrust: 5.40 lb on 6S (21.9V)

RPM: 39,640 on 6S (21.9V)

Watts: 1,160 on 6S (21.9V)

Current: 53A on 6S (21.9V)

*Data measured in lab conditions using bell mouth intake and tail pipe measuring 159mm in length with 72.0mm exit diameter

Examples of Airplane Setups:

E-flite Habu 32 DF ARF (EFL8075)

Comments – High performance ducted fan on 6S

Weight w/Battery: 7.05 - 7.40 lb (3.20 - 3.35 kg)

Motor: BL32 Ducted Fan Brushless Motor, 2150Kv (EFLM3032DFA)

Battery: 5000mAh 6S 22.2V 30C Li-Po (EFLB50006S30)

ESC: 80A Pro SB Brushless (EFLA1080)

Accessories and Spare Parts:

EFLDF321

EFLDF322

EFLDF153

Rotor, 5-blade: Delta-V 32

Aluminum Spinner Nut w/Set Screw: Delta-V 32

Center Body Fairing, 28mm: EDF

EFLDF324 Intake Ring: Delta-V 32

EFLM3032DFA BL32 Ducted Fan Brushless Motor, 2150Kv

EFLA1080

EFLA110

80A Pro Switch-mode BEC Brushless ESC

Power Meter (measures power output in amps, volts, watts, and capacity)

EFLA249 Bullet Connector Set, Gold, 4mm (3)

Battery Choices:

EFLB50006S30 5000mAh .36S 22.2V 30CLi-Po, 10AWG EC5

EFLB50006S50 5000mAh 6S 22.2V 50CLi-Po, 10AWG EC5

THP50006SP45 5000mAh 6C/6S 22.2V G4 Pro Power 45C Li-Po

There are many Li-Po battery brands on the market with several choices for consumers. We recommend either E-flite or Thunder

Power batteries and list some possible choices for the BL32 DF Brushless Motor, depending on the airplane application.

Installation Instructions:

The Delta-V 32 decal is on the top side of the fan unit. Also the center mold line of the fan unit is on the bottom side of the mounting tabs. This will help you orientate the fan properly before installing into your airplane.

1. Slide the motor wires into the center body fairing as shown. 2. Connect the center body fairing to the back of the motor using the two 2mm x 5mm screws provided. Note: You may want to trial fit the center body fairing so you can make sure the wires are accessible to plug into the ESC when the motor is attached to the fan unit. You may have to re-position the fairing before attaching to the motor.

3. Slide the threaded shaft onto the motor shaft and tighten 4. Attach the motor to the fan unit using the two 3mm x 5mm screws both set screws. Use removable blue thread lock. provided.

5. Install the rotor 6. Screw the spinner onto the threaded shaft and tighten while holding the spinner in place making sure it is secure. Use an L-wrench or something similar to help tighten the spinner.

EDF Safety Precautions:

This EDF unit contains a rotating part so use extreme caution.

Never operated the EDF with loose clothing that can get caught in the rotor, and never operate the EDF while holding it in your hands. Please read the warning information included with your motor for safety information related to the operation of motors with propellers. Failure to comply with these warnings and/or improper use of propellers and EDF units may result in serious injury.

WARRANTY AND REPAIR POLICY

Warranty Period

Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase by the Purchaser.

Limited Warranty

Horizon reserves the right to change or modify this warranty without notice and disclaims all other warranties, express or implied.

(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not transferable.

REPAIR OR REPLACEMENT AS

PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those

Products purchased from an authorized Horizon dealer. Third party transactions are not covered by this warranty. Proof of purchase is required for all warranty claims.

(b) Limitations

- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE

PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE

REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii) replace, any

Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser’s exclusive remedies. Horizon reserves the right to inspect any and all equipment involved in a warranty claim. Repair or replacement decisions are at the sole discretion of Horizon. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of or to any part of the Product. This warranty does not cover damage due to improper installation, operation, maintenance, or attempted repair by anyone other than Horizon. Return of any Product by Purchaser must be approved in writing by Horizon before shipment.

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR

PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED

IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised to return this Product immediately in new and unused condition to the place of purchase.

Law: These Terms are governed by Illinois law (without regard to conflict of law principals).

WARRANTY SERVICES

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the

Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please direct your email to [email protected], or call 877.504.0233 toll free to speak to a Product Support representative. You may also find information on our website at www.horizonhobby.com.

Inspection or Repairs

If this Product needs to be inspected or repaired, please use the Horizon Online Repair Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please Note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Repair Request is available at www.horizonhobby.com under the

Repairs tab. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for repair. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.

Notice: Do not ship batteries to Horizon. If you have any issue with a battery, please contact the appropriate Horizon Product

Support office.

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase date.

Provided warranty conditions have been met, your Product will be repaired or replaced free of charge. Repair or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost . By submitting the item for repair you are agreeing to payment of the repair without notification. Repair estimates are available upon request. You must include this request with your repair. Non-warranty repair estimates will be billed a minimum of Π hour of labor. In addition you will be billed for return freight.

Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for inspection or repair, you are agreeing to Horizon’s Terms and Conditions found on our website under the Repairs tab.

Items requiring inspection or repair should be shipped to one of the following addresses (freight prepaid):

Horizon Service Center

4105 Fieldstone Road

Champaign, Illinois 61822

Please call 877-504-0233, or e-mail us at [email protected] with any questions or concerns regarding this product or warranty.

United Kingdom:

Horizon Hobby UK

Units 1-4 Ployters Rd

Staple Tye

Harlow, Essex CM18 7NS

United Kingdom

Please call +44 (0) 1279 641 097 or email us at [email protected] with any questions or concerns regarding this product or warranty.

Germany:

Horizon Technischer Service

Hamburger Strasse 10

25335 Elmshorn

GERMANY

Please call +49 4121 46199 66 or email us at [email protected] with any questions or concerns regarding this product or warranty.

© 2011 Horizon Hobby, Inc. www.horizonhobby.com www.E-fliteRC.com

E-flite is an exclusive brand of Horizon Hobby, Inc.

Instructions for Disposal of WEEE by Users in the European Union:

This product must not be disposed of with other waste.

Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to as designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product.

Age Recommendation: Not for children under 14 years. This is not a toy.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement