CyberPower | CPBC4400 | User guide | CyberPower CPBC4400

CyberPower CPBC4400
LED INDICATOR
NO.
USB BATTERY PACK
USER GUIDE
CONDITION
LED INDICATION
1
Battery Life Indicator
Three LEDs represent 35%, 70%
and 100% battery life from left
to right side.
2
Battery Failure
3
Overload
The first and third LEDs are
flashing simultaneously.
All three LEDs are flashing
simultaneously.
4
Low Battery
The first LED is flashing rapidly.
PACKAGE CONTENTS
B
Model: CPBC4400 Series
INTRODUCTION
The USB Battery Pack (CPBC4400 Series) is a
rechargeable lithium-ion battery that is designed for
powering mobile devices such as phones, MP3 players,
and handheld gaming devices while away from other
power sources
FEATURES
- Compact and portable design
- Built in USB power cable
- Battery life indicator
Battery Capacity: 4400mA
Rated Input: DC 5V 1A
Rated Output: DC 5V 1A
PC Charging time: ~6 Hrs
Dimension: 3.0 x 2.3 x 0.9 inch
Weight: 4.66 oz
Environment:
Storage: 14 to 122˚F (-10 to 50˚C)
Operation: 32 to 104˚F (0 to 40˚C)
IMPORTANT! PRIOR TO FIRST USE
The CPBC4400 Series is packaged in a protection mode
for shipping. Prior to use, connect the CPBC4400 Series
to a USB power source to set it to normal mode and the
suggested a full 10-hour charge.
CHARGE THE
POWER PACK
5
U
S
B
USB
4
3
POWER
YOUR DEVICES
2
2
3
4
5
Discharge Display Switch
Charging LED Indicator Switch
Power Off
Flash Light ON / OFF
Flash Light
5V USB Output Port
LED lndicator
Charger Input Port
C.The battery pack is
charging the device
and the power source
is charging the
battery pack
simultaneously.
Power bank
does not
charge
a.Incorrect connection Re-attach the USB connector
between charger and to the USB port.
USB Battery Pack.
b.No power from the
source.
DESCRIPTION
Press the button
Press the button
Press and hold 3 seconds
Press twice
White light
5V/1A USB port output
As the “LED INDICATOR”
table showing
5V/1A USB port input
TROUBLE SHOOTING
Problem
Possible Cause
USB Battery a.The power of device
is over specification.
Pack does
not power
b.The battery is out
the device
of power
The device can’t be charged
when the power source is
charging the battery pack.
The solution is to remove the
device from the battery pack.
a.Check that power is provided
to the USB port.
b. The battery pack has a low
charge. Recharge the
power battery pack.
Before using the USB Battery Pack, please read the following
warnings carefully. Use the product according to the
procedures described in this manual. Failure to follow these
safety precautions may result in fire, explosion, electrical
shock or other dangers.
Charge the USB Battery Pack by attaching the USB charging
connector to any powered USB port, including but not limited to a
desktop computer, laptop, USB powered hub or USB wall charger.
Recharge the CPBC4400 Series every 3 months when not use to
ensure the best battery performance. The battery capacity may
decline after 300 times usage.
1
1
USB Battery
Pack does
not power
the device
SAFETY PRECAUTION
TO CHARGE THE BATTERY PACK
PRODUCT VIEW:
Solution
C.Short Circuit of
Reset the battery pack.
battery pack product
SPECIFICATIONS
ITEM
Possible Cause
• USB Battery Pack (CPBC4400 Series)
• User Guide
US
NO.
Problem
Solution
Check the power specification
of the device before charging
with the CPBC4400 Series.
Charge the battery pack via a
USB port.
1. Do not disassemble this product, or any of its parts.
2. Store between 14 to 122˚F (-10 to 50˚C).Operate between
32 to 104°F(0 to 40°C).
3. Do not immerse this product in water or other liquids, as
such use may result in fire or electrical shock. If water or
other liquids enter the battery interior, unplug the product
immediately from any attached power source or device.
4. Do not use this product with wet hands. Moisture in or on
this product may result in electrical shock.
5. Do not expose this product to direct flame or leave it in an
overheated condition, as the battery may explode.
6. Store this product in a cool and dry environment when not
in use.
7. Do not puncture this product. Puncturing the battery may
cause the release of harmful substances.
8. It is normal for the USB Battery Pack to become warm
during charging.
9. Keep this product out of the reach of children. Ensure that
all users read these warnings and instructions before using.
10. Please recycle USB Battery Pack in accordance with local
environmental laws and regulations.
• Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
If the LED indicator extinguishes automatically during the
charging process, press the button to revert.
FCC WARNING
Changes or modifications not expressly approved by the
party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
LIMITED PRODUCT WARRANTY
CyberPower offers limited product warranty for the
hardware of the USB Battery Pack* and the product is
free from material and manufacturing defects for one year.
(*battery excluded) A reasonable purchase proof with
date must be provided when submission. CyberPower's
sole responsibility is to repair or replace the product if a
material or manufacturing defect results in product failure
during its normal use. The warranty is void if the product is
damaged due to abuse, alteration, misuse, negligence,
incorrect voltage supply, air/water pollution, accidents and
natural disasters.
LEGAL NOTICES
FCC Part 15
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
CyberPower Systems, Inc.
www.cpsww.com
© 2013 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
K09-0000174-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising