SPHDA120 - Pioneer® Double DIN AM/FM/MP3/WMA

SPHDA120 - Pioneer® Double DIN AM/FM/MP3/WMA
Black plate (1,1)
English
Installation Manual
Smartphone Receiver
SPH-DA120
<CRD4800-A>1
Black plate (2,1)
Contents
Precautions
Your new product and this manual 3
Important safeguards 3
Connection
Precautions before connecting the
system 4
Before installing this product 4
To prevent damage 5
– Notice for the blue/white lead 5
Parts supplied 6
Connecting the power cord (1) 8
Connecting the power cord (2) 10
Connecting the system 11
Connecting to separately sold power
amp 12
Connecting an iPhone with Lightning
connector 13
– Connecting via the USB port 13
– Connecting via the HDMI port 13
Connecting an iPhone with 30-pin
connector 14
– Connecting via the AUX input 14
– Connecting via the RGB input 15
Connecting the Android™ device 15
– Connecting an Android device with an
HDMI port 15
– Connecting an Android device with an
MHL port 16
Connecting the MirrorLink™ device 16
Securing the High Speed HDMI® Cable 17
Connecting a rear view camera 18
Connecting the external video
component 19
– Using AV input 19
– Using an AUX input 19
Connecting an HDMI device 20
Connecting the rear display 21
2
– When using a rear display connected to
rear video output 21
Installation
Precautions before installation 22
To avoid electromagnetic interference 22
Before installing 22
Installing this product 23
– Installation notes 23
– Parts supplied 24
– Installation using the screw holes on
the side of this product 24
Installing the GPS antenna 25
– Installation notes 25
– Parts supplied 25
– When installing the antenna inside the
vehicle (on the dashboard or rear
shelf) 26
Installing the microphone 27
– Parts supplied 27
– Mounting on the sun visor 27
– Installation on the steering column 28
– Adjusting the microphone angle 28
After installation
After installing this product 29
En
<CRD4800-A>2
Black plate (3,1)
Section
Precautions
01
Important safeguards
! Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention
in any way from the safe operation of your
vehicle. Always observe safe driving rules
and follow all existing traffic regulations. If
you experience difficulty in operating this
product or reading the display, park your
vehicle in a safe location and apply the
parking brake before making the necessary
adjustments.
! This manual explains how to install this
product in your vehicle. Operation of this
product is explained in the separate manuals.
! Do not install this product where it may (i)
obstruct the driver’s vision, (ii) impair the
performance of any of the vehicle’s operating systems of safety features, including
airbags, hazard lamp buttons, or (iii) impair
the driver’s ability to safely operate the vehicle. In some cases, it may not be possible
to install this product because of the vehicle type or the shape of the vehicle interior.
Pioneer does not recommend that you install
this product yourself. This product is designed for professional installation only. We
recommend that only authorized Pioneer service personnel, who have special training
and experience in mobile electronics, set up
and install this product. NEVER SERVICE
THIS PRODUCT YOURSELF. Installing or
servicing this product and its connecting
cables may expose you to the risk of electric
shock or other hazards, and can cause damage to this product that is not covered by
warranty.
WARNING
English
Your new product and this
manual
! Read this manual fully and carefully before
installing this product.
! Keep this manual handy for future reference.
! Pay close attention to all warnings in this
manual and follow the instructions carefully.
! Traffic restrictions and advisories are always more important than guidance given
by a third-party navigation/mapping iPhone
application. Always obey current traffic restrictions, even if the application provides
contrary advice.
! As with any accessory in your vehicle’s interior, this product should not divert your
attention from the safe operation of your
vehicle as it may result in serious injury or
death. If you experience difficulty in operating the system or reading the display,
please make adjustments while safely
parked.
! Please remember to wear your seat belt at
all times while operating your vehicle. If
you are in an accident, your injuries can be
considerably more severe if your seat belt
is not properly buckled.
! Certain country and government laws may
prohibit or restrict the placement and use
of this product in your vehicle. Please comply with all applicable laws and regulations
regarding the use, installation and operation of this product.
En
<CRD4800-A>3
3
Black plate (4,1)
Section
02
Connection
Precautions before
connecting the system
WARNING
Do not take any steps to tamper with or disable the parking brake interlock system
which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or
death.
CAUTION
! If you decide to perform the installation
yourself, and have special training and experience in the mobile electronics installations, please carefully follow all of the
steps in the installation manual.
! Secure all wiring with cable clamps or
electrical tape. Do not allow any bare wiring to remain exposed.
! Do not directly connect the yellow lead of
this product to the vehicle battery. If the
lead is directly connected to the battery,
engine vibration may eventually cause
the insulation to fail at the point where
the wire passes from the passenger compartment into the engine compartment. If
the yellow lead’s insulation tears as a result of contact with metal parts, short-circuiting can occur, resulting in
considerable danger.
! It is extremely dangerous to allow cables
to become wound around the steering column or shift lever. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or hinder driving.
! Make sure that the cables and wires will
not interfere with or become caught in
any of the vehicle’s moving parts, especially the steering wheel, shift lever, parking brake, sliding seat tracks, doors, or
any of the vehicle’s controls.
! Do not route wires where they will be exposed to high temperatures. If the insulation heats up, wires may become
4
damaged, resulting in a short circuit or
malfunction and permanent damage to
the product.
! Do not cut the GPS antenna cable to
shorten it or use an extension to make it
longer. Altering the antenna cable could
result in a short circuit or malfunction.
! Do not shorten any leads. If you do, the
protection circuit (fuse holder, fuse resistor or filter, etc.) may fail to work properly.
! Never feed power to other electronic products by cutting the insulation of the
power supply lead of this product and tapping into the lead. The current capacity of
the lead will be exceeded, causing overheating.
Before installing this product
! Use this unit with a 12-volt battery and negative grounding only. Failure to do so may
result in a fire or malfunction.
! To avoid shorts in the electrical system, be
sure to disconnect the (–) battery cable before installation.
En
<CRD4800-A>4
Black plate (5,1)
Section
Connection
02
WARNING
! Use speakers over 50 W (output value)
and between 4 W to 8 W (impedance value).
Do not use 1 W to 3 W speakers for this
unit.
! The black cable is ground. When installing this unit or power amp (sold separately), make sure to connect the ground
wire first. Ensure that the ground wire is
properly connected to metal parts of the
car’s body. The ground wire of the power
amp and the one of this unit or any other
device must be connected to the car separately with different screws. If the screw
for the ground wire loosens or falls out, it
could result in fire generation of smoke or
malfunction.
! To avoid short-circuiting, cover the disconnected lead with insulating tape. It is especially important to insulate all unused
speaker leads, which if left uncovered may
cause a short circuit.
! Attach the connectors of the same color to
the corresponding colored port, i.e., blue
connector to the blue port, black to black,
etc.
! Refer to the owner’s manual for details on
connecting the power amp and other units,
then make connections accordingly.
! Since a unique BPTL circuit is employed,
do not directly ground the * side of the
speaker lead or connect the * side of another side of the speaker lead together. Be
sure to connect the * side of the speaker
lead to the * side of the speaker lead on
this product.
English
To prevent damage
Power amp
Ground wire
Notice for the blue/white lead
Other devices
(Another electronic
device in the car)
*1Not
Metal parts of car’s body
supplied for this unit.
F
O
STAR
T
STAR
T
ACC position
OF
ACC O
N
F
N
OF
! When replacing the fuse, be sure to only
use a fuse of the rating prescribed on this
product.
! When disconnecting a connector, pull the
connector itself. Do not pull the lead, as
you may pull it out of the connector.
! This product cannot be installed in a vehicle without ACC (accessory) position on
the ignition switch.
! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp’s system remote control terminal, the auto-antenna relay control terminal, or the antenna booster power control
terminal (max. 300 mA 12 V DC). The control signal is output through the blue/white
lead, even if the audio source is switched
off.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.
! Be sure not to use this lead as the power
supply lead for the auto-antenna or antenna booster. Such connection could cause
excessive current drain and malfunction.
No ACC position
En
<CRD4800-A>5
5
Black plate (6,1)
Section
02
Connection
Parts supplied
This product
Power cord
GPS antenna
Microphone
Mini-jack extension
cable
USB cable
Lock tie
6
En
<CRD4800-A>6
Black plate (7,1)
Section
Connection
02
English
En
<CRD4800-A>7
7
Black plate (8,1)
Section
02
Connection
Connecting the power cord (1)
Yellow
To terminal supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
Note
When a subwoofer is connected to this product
instead of a rear speaker, change the rear output
setting in the initial setting. (Refer to Operation
Manual.) The subwoofer output of this product is
monaural.
With a two-speaker system, do not connect anything
to the speaker leads that are not connected to
speakers.
Gray
White
Front speaker




White/black
Front speaker
Gray/black
Left
Right
Green
Rear speaker or
subwoofer (4 Ω)
Violet




Rear speaker or
subwoofer (4 Ω)
Violet/black
Green/black
When using a subwoofer of 70 W (2 Ω), be sure to connect with violet and violet/black leads of this
product. Do not connect anything with green and green/black leads.
Green
Violet

Subwoofer (4 Ω)
2
Not used.
Green/black
8
Violet/black

En
<CRD4800-A>8
Y
f
t
A
c
Black plate (9,1)
Section
Connection
02
English
This product
Power supply
Power cord
Fuse (10 A)
Yellow/black (MUTE)
If you use equipment with a mute
function, connect that equipment to
the Audio Mute lead. If not, keep the
Audio Mute lead free of any
connections.
Note
Audio source will be set to mute or attenuate, while
the following sounds will not be muted or
attenuated. For details, refer to Operation Manual.
— Voice guidance of the navigation
— Incoming ring tone and incoming voice of the
cellular phone that is connected to this product
via Bluetooth wireless technology
Blue/white (SYSTEM REMOTE CONTROL)
To auto-antenna relay control terminal or antenna
booster power control terminal (max. 300 mA 12 V DC).
If the vehicle has a glass antenna, connect to the
antenna booster power control terminal (max. 300 mA
12 V DC).
En
<CRD4800-A>9
9
Black plate (10,1)
Section
02
Connection
Connecting the power cord (2)
This product
Power supply
Power cord
Light green (PARKING BRAKE)
Used to detect the ON/OFF status of
the parking brake. This lead must be
connected to the power supply side of
the parking brake switch.
If this connection is made incorrectly
or omitted, certain functions of this
product will be unusable.
Note
The position of the parking brake
switch vary depending on the vehicle
model. For details, consult your
authorized Pioneer dealer or an
installation professional.
Violet/white (REVERSE-GEAR SIGNAL INPUT)
This is connected so that this product can detect whether
the vehicle is moving forwards or backwards. Connect the
violet/white lead to the lead whose voltage changes when
the shift lever is put in reverse. Unless connected, the
sensor may not detect your vehicle traveling
forward/backward properly, and thus the position of your
vehicle detected by the sensor may be misaligned from
the actual position.
Note
When you use a rear view camera, please make
sure to connect this lead. Otherwise you cannot
switch to the rear view camera picture.
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS
DESIGNED TO DETECT PARKED STATUS AND MUST
BE CONNECTED TO THE POWER SUPPLY SIDE OF THE
PARKING BRAKE SWITCH. IMPROPER CONNECTION
OR USE OF THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR
DAMAGE.
Power supply side
Ground side
Parking brake switch
10
En
<CRD4800-A>10
Black plate (11,1)
Section
Connection
02
English
Connecting the system
This product
Antenna jack
4 m (13 ft. 1 in.)
Wired remote input
Please refer to the instruction manual for
the Hard-wired remote control adapter
(sold separately).
Vehicle antenna
GPS antenna
3.55 m (11 ft. 8 in.)
Microphone
WARNING
· To avoid the risk of accident and the potential violation of applicable laws, this
product should never be used while the vehicle is being driven except for
navigation purposes. And, also rear displays should not be in a location where it
is a visible distraction to the driver.
· In some countries, the viewing of images on a display inside a vehicle even by
persons other than the driver may be illegal. Where such regulations apply they
must be obeyed and this product’s video source should not be used.
En
<CRD4800-A>11
11
Black plate (12,1)
Section
02
Connection
Connecting to separately sold power amp
Power amp
(sold separately)
RCA cables
Rear outputs
(REAR OUTPUT)
(sold separately)
Power amp
(sold separately)
15 cm (5-7/8 in.)
Power amp
(sold separately)
Front outputs
(FRONT OUTPUT)
This product
Power supply
White, Red (SWL, SWR)
Power cord
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
System remote control










Front speaker
Rear speaker


Subwoofer
Notes
· You can change the RCA output of the subwoofer depending on your subwoofer
system. (Refer to Operation Manual.)
· The subwoofer output of this product is monaural.
12
En
<CRD4800-A>12
Black plate (13,1)
Section
Connection
02
Notes
! For details on how to connect an external device using a separately sold cable, refer to the
manual for the cable.
! For details concerning the connection, operations and compatibility of iPhone, refer to Operation Manual.
Connecting via the USB port
The USB interface cable for iPod / iPhone (CDIU52) (sold separately) is required for the connection.
USB port 1
Note
Connect the USB cable to USB port 1 when using
Apple CarPlay.
English
Connecting an iPhone with
Lightning connector
Connecting via the HDMI port
The following cables are required for the connection.
! HDMI interface cable for iPod / iPhone
(CD-IH202) (sold separately)
! USB interface cable for iPod / iPhone (CDIU52) (sold separately)
! Lightning Digital AV Adapter (Apple Inc.
products) (sold separately)
This product
USB port 2
iPhone with
Lightning connector
USB cable
1.5 m (4 ft. 11 in.)
USB interface cable for iPod / iPhone
(CD-IU52) (sold separately)
En
<CRD4800-A>13
13
Black plate (14,1)
Section
02
Connection
USB port 1
This product
Connecting an iPhone with
30-pin connector
Notes
HDMI port
USB cable
1.5 m (4 ft. 11 in.)
iPhone with
Lightning connector
High Speed HDMI® Cable
(Type A - A)
(supplied with CD-IH202)
! For details on how to connect an external device using a separately sold cable, refer to the
manual for the cable.
! For details concerning the connection, operations and compatibility of iPhone, refer to Operation Manual.
Connecting via the AUX input
The USB interface cable for iPod / iPhone (CDIU201V) (sold separately) is required for the
connection.
USB port 1
This product
Lightning Digital AV Adapter
(Apple Inc. products)
(sold separately)
USB port 2
AUX input
Mini-jack extension cable
2 m (6 ft. 7 in.)
USB interface cable for iPod / iPhone
(CD-IU52) (sold separately)
Note
! When you connect the High Speed HDMI®
Cable, use the lock tie to fix it securely.
= For details, refer to Securing the High
®
Speed HDMI Cable on page 17.
iPhone with
30-pin connector
USB cable
1.5 m
(4 ft. 11 in.)
USB interface cable for iPod / iPhone
(CD-IU201V) (sold separately)
Note
Connect the USB cable to USB port 1 when using
“Pandora” as the source.
14
En
<CRD4800-A>14
Black plate (15,1)
Section
Connection
02
The USB interface cable for iPod / iPhone (CDIU201S) (sold separately) is required for the
connection.
USB port 1
This product
RGB input
iPhone with
30-pin connector
Connecting the Android™
device
App Connectivity Kit (CD-AH200) (sold separately) is required for the connection.
English
Connecting via the RGB input
Notes
! For details on how to connect an external device using a separately sold cable, refer to the
manual for the cable.
! For details concerning the connection and operations of Android device, refer to Operation
Manual.
! When you connect the High Speed HDMI®
Cable, use the lock tie to fix it securely.
= For details, refer to Securing the High
®
Speed HDMI Cable on page 17.
Connecting an Android device
with an HDMI port
This product
USB cable
1.5 m (4 ft. 11 in.)
USB interface cable for iPod / iPhone
(CD-IU201S) (sold separately)
USB port 2
USB cable
(supplied with
CD-AH200)
HDMI port
High Speed HDMI®
Cable (Type A - A)
(supplied with
CD-AH200)
Adapter cable
(HDMI Type A - D)
(supplied with CD-AH200)
USB - micro USB cable
(Type USB A - micro USB B)
(supplied with CD-AH200)
Android device
En
<CRD4800-A>15
15
Black plate (16,1)
Section
02
Connection
Connecting an Android device
with an MHL port
This product
Connecting the MirrorLink™
device
The USB interface cable for use with
MirrorLink™ devices (CD-MU200) (sold separately) is required for the connection.
This product
USB port 2
HDMI port
USB cable
(supplied with
CD-AH200)
USB port 2
High Speed HDMI® Cable
(Type A - A)
(supplied with CD-AH200)
MHL adapter
(supplied with
CD-AH200)
Android device
MirrorLink device
USB cable
(supplied with CD-MU200)
USB - micro USB cable
(Type USB A - micro USB B)
(supplied with CD-MU200)
USB - micro USB cable
(Type USB A - micro USB B)
(supplied with CD-AH200)
Note
For details on how to connect an external device
using a separately sold cable, refer to the manual
for the cable.
16
En
<CRD4800-A>16
Black plate (17,1)
Section
Connection
02
English
Securing the High Speed
HDMI® Cable
Be sure to fix the High Speed HDMI® Cable
with the lock tie, when you connect the external device with the High Speed HDMI® Cable.
1 Insert the High Speed HDMI® Cable into
the HDMI port.
2 Wrap the lock tie around the hook
above the HDMI port and the High Speed
HDMI® Cable, and then tighten it to secure
the High Speed HDMI® Cable.
1
3
2
1
2
3
p
Hook
Lock tie
High Speed HDMI® Cable
Do not tighten up the lock tie more than
necessary.
En
<CRD4800-A>17
17
Black plate (18,1)
Section
02
Connection
Connecting a rear view camera
Rear view camera
(ND-BC6)
(sold separately)
When this product is used with a rear view
camera, it is possible to automatically switch
from the video to rear view image when the
shift lever is moved to REVERSE (R). Camera
View mode also allows you to check what is
behind you while driving.
To video output
RCA cable
(supplied with ND-BC6)
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR
IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
This product
CAUTION
! The screen image may appear reversed.
! The rear view camera is used as an aid to
keep an eye on trailers, or backing into a tight
parking spot. Do not use this function for entertainment purposes.
! Objects in rear view may appear closer or
more distant than in reality.
! Please note that the image area shown by the
rear view camera may differ slightly when fullscreen images are displayed when backing
and when checking the rear of the vehicle
while moving forward.
Brown (BC IN)
Power supply
Power cord
Violet/white
(REVERSE-GEAR SIGNAL
INPUT)
For more details about the wiring, refer to Connecting
the power cord (2) on page 10.
Notes
! This mode is available when the rear view
camera setting is set to “On”. (For details,
refer to Operation Manual.)
! Connect this product to the rear view camera
only. Do not connect to any other
equipment.
18
En
<CRD4800-A>18
Black plate (19,1)
Section
Connection
02
English
Connecting the external
video component
Using an AUX input
This product
Using AV input
AUX input
You can connect an external video component
to this product.
This product
Mini-jack AV cable
(CD-RM10)
(sold separately)
Mini-jack extension
cable
2 m (6 ft. 7 in.)
15 cm (5-7/8 in.)
23 cm (9 in.)
Yellow
(VIDEO INPUT)
Red, white
(AUDIO INPUT)
Red, white
Yellow
RCA cables
(sold separately)
RCA cables
(sold separately)
To audio outputs
To video output
To video output
To audio outputs
External video
component
(sold separately)
External video
component
(sold separately)
Notes
Note
This mode is available when the setting of AV
input is set to “On”. (For details, refer to Operation Manual.)
! This mode is available when the setting of
AUX input is set to “On”. (For details, refer to
Operation Manual.)
! When connecting an external video component using a mini-jack AV cable, use a separately sold AUX extension cable as necessary.
En
<CRD4800-A>19
19
Black plate (20,1)
Section
02
Connection
Connecting an HDMI device
CAUTION
Be sure to use a mini-jack AV cable (CD-RM10)
(sold separately) for wiring. If you use other
cables, the wiring position might differ resulting
in disturbed images and sounds.
This product
OK
L
V G R
L:
R:
V:
G
V
R
G:
L
Left audio (White)
Right audio (Red)
Video (Yellow)
Ground
HDMI port
High Speed HDMI®
Cable
(sold separately)
HDMI device
(sold separately)
Notes
! For details concerning the operations of HDMI
device, refer to Operation Manual.
! When you connect the High Speed HDMI®
Cable, use the lock tie to fix it securely.
= For details, refer to Securing the High
®
Speed HDMI Cable on page 17.
20
En
<CRD4800-A>20
Black plate (21,1)
Section
Connection
02
English
Connecting the rear display
This product
Yellow (V OUT)
Rear audio
output
Mini pin plug cable
(sold separately)
To audio inputs
RCA cable
(sold separately)
To video input
Rear display with
RCA input jacks
(sold separately)
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This product’s rear video output is for connection
of a display to enable passengers in the rear
seats to watch the video source.
En
<CRD4800-A>21
21
Black plate (22,1)
Section
03
Installation
Precautions before
installation
CAUTION
! Never install this product in places where,
or in a manner that:
— Could injure the driver or passengers if
the vehicle stops suddenly.
— May interfere with the driver’s operation of the vehicle, such as on the floor
in front of the driver’s seat, or close to
the steering wheel or shift lever.
! Make sure there is nothing behind the
dashboard or paneling when drilling holes
in them. Be careful not to damage fuel
lines, brake lines, electronic components,
communication wires or power cables.
! When using screws, do not allow them to
come into contact with any electrical lead.
Vibration may damage wires or insulation,
leading to a short circuit or other damage
to the vehicle.
! To ensure proper installation, be sure to
use the supplied parts in the manner specified. If any parts are not supplied with
this product, use compatible parts in the
manner specified after you have the parts’
compatibility checked by your dealer. If
parts other than supplied or compatible
ones are used, they may damage internal
parts of this product or they may work
loose and the product may become detached.
! It is extremely dangerous to allow cables
to become wound around the steering column or shift lever. Be sure to install this
product, its cables, and wiring away in
such so that they will not obstruct or hinder driving.
! Make sure that leads cannot get caught in
a door or the sliding mechanism of a seat,
resulting in a short circuit.
! Please confirm the proper function of
your vehicle’s other equipment after installation of this product.
22
! Do not install this product where it may (i)
obstruct the driver’s vision, (ii) impair the
performance of any of the vehicle’s operating systems or safety features, including airbags, hazard lamp buttons or (iii)
impair the driver’s ability to safely operate the vehicle.
! Install this product between the driver’s
seat and front passenger seat so that it
will not be hit by the driver or passenger if
the vehicle stops quickly.
! Never install this product in front of or
next to the place in the dashboard, door,
or pillar from which one of your vehicle’s
airbags would deploy. Please refer to your
vehicle’s owner’s manual for reference to
the deployment area of the frontal airbags.
! Failure to follow all of these precautions
may result in serious injury or death.
To avoid electromagnetic
interference
In order to prevent interference, set the following items as far as possible from this product,
other cables or leads:
! FM, AM antenna and its lead
! GPS antenna and its lead
In addition, you should lay or route each antenna lead as far as possible from other antenna leads. Do not bind, lay or route them
together, or cross them. Electromagnetic
noise will increase the potential for errors in
the vehicle’s location display.
Before installing
! Consult with your nearest dealer if installation requires drilling holes or other modifications of the vehicle.
! Before making a final installation of this
product, temporarily connect the wiring to
confirm that the connections are correct
and the system works properly.
En
<CRD4800-A>22
Black plate (23,1)
Section
Installation
03
Installation notes
! Do not install this product in places subject
to high temperatures or humidity, such as:
— Places close to a heater, vent or air conditioner.
— Places exposed to direct sunlight, such
as on top of the dashboard.
— Places that may be exposed to rain,
such as close to the door or on the vehicle’s floor.
! Install this product in an area strong enough to bear its weight. Choose a position
where this product can be firmly installed,
and install it securely. If this product is not
securely installed, the current location of
the vehicle cannot be displayed correctly.
! Install this product horizontally on a surface within 0 to 30 degrees tolerance (within 5 degrees to the left or right). Improper
installation of the unit with the surface
tilted more than these tolerances increases
the potential for errors in the vehicle’s location display, and might otherwise cause reduced display performance.
! When installing, to ensure proper heat dispersal when using this unit, make sure you
leave ample space behind the rear panel
and wrap any loose cables so they are not
blocking the vents.
English
Installing this product
Leave ample
5 cm
space
5 cm
! The cords must not cover the area shown
in the figure below. This is necessary to
allow the amps to dissipate heat.
Do not cover this area.
! Do not squeeze this product into the holder.
It may damage the front panel.
30°
5°
5°
En
<CRD4800-A>23
23
Black plate (24,1)
Section
03
Installation
Parts supplied
This product
Installation using the screw
holes on the side of this product
Truss head screw
(5 mm × 8 mm)
(6 pcs.)
% Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the bracket, and tighten the screws at three locations
on each side.
Use either the truss head screws (5 mm ×
8 mm) or flush surface screws (5 mm ×
9 mm), depending on the shape of the bracket’s screw holes.
Flush surface screw
(5 mm × 9 mm)
(6 pcs.)
If the pawl interferes with installation,
you may bend it down out of the way.
1
3
2
1 Factory radio-mounting bracket
2 Dashboard or console
3 Truss head screw or flush surface screw
Be sure to use the screws supplied with
this product.
24
En
<CRD4800-A>24
Black plate (25,1)
Section
Installation
03
English
Installing the GPS antenna
Parts supplied
CAUTION
Do not cut the GPS antenna lead to shorten
it or use an extension to make it longer. Altering the antenna cable could result in a short
circuit or malfunction and permanent damage to this product.
Installation notes
GPS antenna
Metal sheet
Clamp (3 pcs.)
Double-sided tape
! The antenna should be installed on a level
surface where radio waves will be blocked
as little as possible. Radio waves cannot be
received by the antenna if reception from
the satellite is blocked.
1
2
1 Dashboard
2 Rear shelf
! When installing the GPS antenna inside
the vehicle, be sure to use the metal sheet
provided with your system. If this is not
used, the reception sensitivity will be poor.
! Do not cut the accessory metal sheet. This
would reduce the sensitivity of the GPS antenna.
! Take care not to pull the antenna lead when
removing the GPS antenna. The lead may
become detached.
! Do not paint the GPS antenna, as this may
affect its performance.
En
<CRD4800-A>25
25
Black plate (26,1)
Section
03
Installation
When installing the antenna inside the vehicle (on the dashboard
or rear shelf)
WARNING
Do not install the GPS antenna over any sensors or vents on the dashboard of the vehicle,
as doing so may interfere with the proper
functioning of such sensors or vents and may
compromise the ability of the metal sheet
under the GPS antenna to properly and securely affix to the dashboard.
1
2
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
Note
The metal sheet contains a
strong adhesive which may
leave a mark on the surface
if it is removed.
3
1 GPS antenna
2 Metal sheet
Peel off the protective sheet on the rear.
3 Clamps
Use clamps to secure the lead where necessary inside the vehicle.
Affix the metal sheet on the surface as level as
possible where the GPS antenna faces the
window. Affix the GPS antenna on the metal
sheet using the double-sided tape.
26
Notes
! When attaching the metal sheet, do not cut
it into small pieces.
! Some models use window glass that does
not allow signals from GPS satellites to
pass through. On such models, install the
GPS antenna on the outside of the vehicle.
En
<CRD4800-A>26
Black plate (27,1)
Section
Installation
03
! Install the microphone in a place where its
direction and distance from the driver
make it easiest to pick up the driver’s voice.
! Be sure to turn off (ACC OFF) the product
before connecting the microphone.
2 Attach the microphone clip to the sun
visor.
1
English
Installing the microphone
Parts supplied
2
Microphone
Double-sided tape
Mounting on the sun visor
1 Fit the microphone lead into the
groove.
1
1 Microphone clip
2 Clamps
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
Install the microphone on the sun visor when
it is in the up position. It cannot recognize the
driver’s voice if the sun visor is in the down position.
2
1 Microphone lead
2 Groove
En
<CRD4800-A>27
27
Black plate (28,1)
Section
03
Installation
Installation on the steering column
1 Detach the microphone base from the
microphone clip by sliding the microphone
base while pressing the tab.
1
Adjusting the microphone angle
2
4
1
2
3
4
1 Double-sided tape
2 Clamps
Use separately sold clamps to secure the
lead where necessary inside the vehicle.
The microphone angle can be adjusted.
3
Microphone
Tab
Microphone base
Microphone clip
2 Mount the microphone on the steering
column.
Install the microphone on the steering column, keeping it away from the steering wheel.
1
2
28
En
<CRD4800-A>28
Black plate (29,1)
Section
After installation
04
English
After installing this product
1 Reconnect the negative (–) terminal of
the vehicle’s battery.
First, double-check that all connections are
correct and that this product is installed correctly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (–) cable to the negative (–) terminal of the battery.
2
3
Start the engine.
Change the settings as desired.
= For details concerning operations, refer to
Operation Manual.
4 Drive down an unobstructed road until
the GPS starts receiving the signal normally.
Note
After installing this product, be sure to check at a
safe place that the vehicle is performing normally.
Shop the largest selection of reliable car stereos in our online store.
<CRD4800-A>29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising