Creative® D200 Easy-to-use Portable Wireless

Creative® D200 Easy-to-use Portable Wireless
CR::ATIV::
2.
0200
Quick Start Guide
Enjoy audio from Bluetoot� devices
a.
Press button to
release or remove
Power on the speaker and the LED status indicator will show green. This indicates that upon power up, the status of
the speaker is not connected to any devices.
b.
Pairing
0
,1
····
�
-/·-
Fast Blinking
/
0 -·/
,1 /
�
····
,,
1'
Press and hold the CONNECT button for 3 seconds while the speaker is ON.
c.
0 Bluetooth®
D
compatible with Stereo
B!uetooth devices
..
.
I.
.. .
II.
iv.
Ill.
Bluetooth 9
Search results
Network
Creative D200
CREATIVE D200
PASSCODE
CREATIVE D200
CONNECTED
0000
Connections
Operator
Internet
USS
P/N 03MF809500003 REV A
Model No. : MF8095
1.
11.
1.
Turn on the 8/uetooth feature on your dev i ce.
Search for Creative D200.
iii. Pair and connect to D200. If prompted for passcode, enter 0000.
iv. Pairing success ful, ready to stream music.
Note: The above are generic steps to pair to a 8/uetooth device, for more specific instructions on 8/uetooth
Product Overview
connectivity for your device, please consult your manufacturer's manual.
Connected.
d.
1
Blue LED stays lit.
2
e.
CR'Zt!,TIV:!
020
3.
Switching between paired devices
Switch between your current connected device to your previous connected device by following these steps
Action
Press "CONNECT" button for 1 second
Indicators
D200 LED blinks and stay lit in Blue
Status
Ready to stream music
Note: Ensure that your next paired device' s 8/uetooth feature is ON and ready to accept connections.
You can re-connect to the last connected or previously connected device by either
•
Pressing the CONNECT button once when it is turned ON
•
Initiate a connection from your 8/uetooth device when the speaker is not connected to any device
Product Overview
1. CONNECT Button
2.
Volume Down I Up
3. Power ON/OFF
4. AUX IN
5.DC IN
4.
Reset to factory setting
Follow these steps to return to factory settings and clear paired device memory on the D200.
Action
Ensure the speaker is OFF. Press and hold Power Button for 8 seconds until D200 LED fast blinks
Indicators
D200 LED blinks in Blue
Status
Pairing mode. Ready to accept connection from other devices
5.
Playback with other audio devices via AUX IN
0-<3-{!)
l,IN'lli OIJT
Optional (Sold separately)
6.
FAQ (Frequently Asked Questions)
There's no 8/uetooth link between my device and the Creative 0200. What should I do?
•
Delete the Creative D200 name entry from your 8/uetooth device paired memory list and perform the steps in
Section 2 (Enjoy audio from 8/uetooth devices) to re-pair your device with Creative D200
•
Position them within 1 meter or closer to each other if you experience pairing difficulties
•
Ensure that both your 8/uetooth device and Creative D200 are not connected to any other devices
8/uetooth link is estab lished and paired between the devices b u t there's no music. What should I do?
With some built-in 8/uetooth enabled computers, 3rd party USB 8/uetooth dongles or other devices, you may be
required to manually specify/set-up the audio output as Creative D200. eg,(under sound and audio devices section
on your computer's operating system) Please consult your manufacturer's documentation for further information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement