Promate Beam
Beam
5200mAh Multi-function
Power Bank with Electronic
Lighter and Flashlight
UV Beam
Environmentally
Safe
User Guide
Introduction
Go green with Beam, a one of a kind Power Bank with an electronic flameless
lighter. Not only does this backup battery charge your smartphone but even helps
you light things up when a source of fuel is not available. Additionally Beam features
an emergency LED light and UV Light to check authenticity of bank notes. Beam, An
all in one back up battery that meets your every need.
Packaging Contents
• Beam back-up battery
• Micro-USB Charging Cable
• User Guide
Specification:
Battery Capacity:
Input:
Output:
Battery Type:
Input Type:
Output Type:
5200mAh
DC 5V, 0.8A
DC 5V, 2.0A
Li-ion Battery
Micro-USB Charging port
USB Charging port
1
Features:
• 5200mAh Backup Battery
• Universal USB port to charge any kind of 1A USB powered device
• Flameless and no fuel required electronic lighter
• Environmentally safe
• Over-current, Over-voltage, Over-charge and Short-circuit Protection
• Ultra-bright LED emergency light
• UV beam for counterfeit note checking
Precautions
Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or attached
products.
1.
2.
3.
4.
Do not disassemble the back-up battery or attempt to fix it.
Kindly use an original charging cable provided to charge the product.
Do not attempt to replace any part of this Back-up battery or battery inside.
Do not crush, puncture, dispose of in fire, short the contacts or expose the
battery to water or other liquids.
5. Do not connect input and output in reverse.
6. Do not store or use the battery in a high temperature environment, including
intense sunlight or heat.
7. Avoid drops, bumps, abrasions and impacts.
8. If there is any reason to believe that there is damage to the battery, discontinue
use immediately.
9. If you find that the battery is too hot, emitting an odor, deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
10. Always charge this product before extended storage.
2
Appearance & Interface Description:
1.
2.
3.
4.
5.
6.
7.
2A output port
5V /0.8A Input port
Multi-function Button
Charge Indicator
LED Light
UV Light
Electronic lighter
7
3
2
4
6
5
1
3
Operation Instructions:
1. Checking the remaining power left in Beam back-up battery
Tap the Multi-Function button once to view the amount of power remaining in
Beam.
No. of LED’s Active
1
2
3
4
% of power remaining
<=25%
<=50%
<=75%
<=100%
2. Charging Beam back-up battery
Plug the Micro-USB end of the charging cable provided into the Micro-USB charging
port in Beam back-up battery. Connect the other end of the Micro-USB charging cable
to a USB power adapter or computer USB port. The battery level indicator LED’s
light up indicating that the back-up battery is charging normally.
4
3. Charging USB chargeable devices using Beam
There is 1 port available on Beam. Plug the USB cable into the USB output
port on Beam back-up battery and the other end into the device. The device
will now automatically start charging. Detach the USB cable once charging is
complete.
4. Using the LED on Beam
• Press the multifunction button twice to turn on the LED located on the
front of the product.
• Press the multifunction button twice again to turn off the LED located on
the front of the product.
5
5. Using the UV light on Beam
• Press and hold the multifunction button to turn on UV light located on the
front of the product.
5. Using electronic lighter on Beam
• open the cap, press and hold the button
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising