Promate | pocketMate.uni | User guide | Promate pocketMate.uni

Promate pocketMate.uni
Universal 4500mAh Power Bank
with 3 Built-in Connectors
User Guide
pocketMate-Uni is the ultimate portable and rechargeable power bank, keeping
your favorite devices charged while you’re on the go. Whether iOS or Android
device, pocketMate-Uni is powerful enough to charge them all. Leave that nest of
cables and connectors at home because pocketMate-Uni has built-in cables to
charge your Apple and Micro-USB devices wherever you go. You can also switch
between 0.5A charging and 1A charging with the click of a button. pocketMate-Uni
has enough power to charge an average smartphone 2-3 times before it needs to be
recharged. And recharging is simple – just plug the device into a USB power adaptor
or computer system.
The compact and portable design makes pocketMate-Uni a convenient companion
while traveling, or simply going about your day - anytime you need that extra boost
of power.
Never be stuck without power again with pocketMate-Uni.
Packaging Contents
• pocketMate-Uni
• User Guide
• Warranty Card
Capacity: 4500mAh
Input: 5V DC, 1A
Output: 5V DC, 0.5-1A
Input Interface: USB Connector
Output Interface: Micro-USB connector, Lightning Connector,
Apple 30-Pin Connector
4500mAh rechargeable battery pack
Built-in Apple® Lightning & 30 pin connectors
Built-in Micro-USB connector
One click button to switch between 0.5 A and 1 A charging
Simple plug and charge capability
Can charge one device at a time
Compact and portable design
pocketMate-Uni may be used to charge all Apple Lightning, Apple 30-pin and
Micro-USB chargeable devices.
Please read all safety instructions and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or attached products.
1. Do not disassemble the power bank or attempt to fix it.
2. Do not attempt to replace any part of this power bank or battery inside.
3. Do not crush, puncture, dispose of in fire, short the contacts or expose the
power bank to water or other liquids.
4. Do not store or use the power bank in a high temperature environment,
including intense sunlight or heat.
5. Avoid drops, bumps, abrasions and impacts.
6. If there is any reason to believe that there is damage to the power bank,
discontinue use immediately.
7. If you find that the power bank is too hot, is emitting and odor is deformed,
punctured or exhibits any suspicious or abnormal behavior, discontinue use
immediately and contact our customer service.
8. Always charge this product before extended storage.
Appearance & Interface Description:
1. 0.5mA/1A Current selector switch
2. Battery level indicator for power bank
3. Micro-USB connector
4. Apple Lightning Connector
5. Apple 30-Pin Connector
6. ON/OFF Switch
7. USB power input port
Operation Instructions:
1. Charging pocketMate-Uni
Connect USB power input port to a power adapter or computer USB port. The
battery level indicator LED starts flashing to indicate the level of charge. When
all the five LEDs light up, pocketMate-Uni is fully charged. To indicate current in
pocketMate-Uni short-press the current selector switch once. The battery
indicators light up denoting the current charge.
2. Charging your device using pocketMate-Uni
pocketMate-Uni has 3 connectors built in:
• Apple Lightning Connector: To charge iPhone 5, iPhone 5S, iPhone 5C, 5th
generation iPod Touch, 7th generation iPod Nano.
• Apple 30-Pin Connector: To charge iPhone, iPhone 3G, iPhone 3GS,
iPhone 4, iPhone 4S, 1st through 4th generation iPod Touch.
• Micro-USB Connector: To charge Micro-USB chargeable devices
Connect your device to one of the ports depending on the type of device. Turn
ON pocketMate-Uni using the ON/OFF Switch. The green or blue LED will start
flashing depending on the current output.
3. Switching between 0.5mA and 1A current output
Some devices require an input current of 1A and some others may require only
a 0.5mA input current. To switch between the amount of output current,
double click the 0.5mA/1A Current selector switch. The colour of the LED
flashing denotes the current output:
• Green LED flashing: 0.5mA current output
• Blue LED flashing:1A current output
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF