Acer | G247HYUsmidp | User guide | Acer G7 G247HYUsmidp

Acer LCD Monitor
User Guide
Copyright © 2014. Acer Incorporated.
All Rights Reserved.
Acer LCD Monitor User Guide
Original Issue: 08/2014
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your computer. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer LCD Monitor User Guide
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies'
product names or trademarks are used herein for identification purposes only and belong to
their respective companies.
iii
Information for your safety and
comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a problem.
•
Due to the nature of the fluorescent light, the screen may flicker during
initial use. Turn off the power switch and then turn it on again to make
sure the flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
The LCD screen has 99.99% or more effective pixels. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen
may remain after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the image
or turning off the power switch for a few hours.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
•
Always unplug the monitor before cleaning.
•
Use a soft cloth to wipe the screen and cabinet front and sides.
iv
Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power from the equipment, be sure to unplug the power cord from
the electrical outlet.
Safe listening
To protect your hearing, follow these instructions.
•
Gradually increase the volume until you can hear it clearly and comfortably
and without distortion.
•
After setting the volume level, do not increase it after your ears have
adjusted.
•
Limit the amount of time listening to music at high volume.
•
Avoid turning up the volume to block out noisy surroundings.
•
Turn the volume down if you can't hear people speaking near you.
Warnings
•
•
•
•
•
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage internal
devices.
The adapter is only used for this monitor ,do not be used for other purposes.
Your device uses one of the following power supplies:
Manufacturer: Delta Electronics Inc., Model: ADP-65VH D
Manufacturer: Chicony Power Technology Co., Ltd., Model: A11-065N1A
Using electrical power
•
•
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
v
•
•
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's power cord is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the power cord plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.
Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, type
SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6
meters (15 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
the power cord or plug is damaged, cut or frayed
•
•
•
•
•
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
the product does not operate normally after following the operating
instructions
vi
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the product to normal condition.
Potentially explosive environments
Switch off your device in any area with a potentially explosive atmosphere and
obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or even
death. Switch off the device near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage and
distribution areas; chemical plants; or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not always,
marked. They include below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as propane or butane),
and areas where the air contains chemicals or particles such as grain, dust or
metal powders.
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
IT Equipment Recycling Information
Acer is strongly committed to environmental protection and views recycling, in
the form of salvaging and disposal of used equipment, as one of the company's
top priorities in minimizing the burden placed on the environment.
We at Acer are very conscious of the environmental effects of our business and
strive to identify and provide the best working procedures to reduce the
environmental impact of our products.
For more information and help when recycling, please go to this website:
http://www.acer-group.com/public/Sustainability/
Visit www.acer-group.com for further information on the features and benefits
of our other products.
Disposal instructions
Do not throw this electronic device into the trash when discarding.
To minimize pollution and ensure utmost protection of the global
environment, please recycle. For more information on the Waste
from Electrical and Electronics Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/
vii
LCD pixel statement
The LCD unit is produced with high-precision manufacturing techniques.
Nevertheless, some pixels may occasionally misfire or appear as black or
red dots. This has no effect on the recorded image and does not constitute
a malfunction.
This product has been shipped enabled for power management:
•
•
•
Activate display’s Sleep mode within 15 minutes of user inactivity.
Activate computer’s Sleep mode within 30 minutes of user inactivity.
Wake the computer from Sleep mode by pushing the power button.
Tips and information for comfortable use
Computer users may complain of eyestrain and headaches after prolonged use.
Users are also at risk of physical injury after long hours of working in front of a
computer. Long work periods, bad posture, poor work habits, stress,
inadequate working conditions, personal health and other factors greatly
increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis,
tenosynovitis or other musculoskeletal disorders. The following symptoms may
appear in the hands, wrists, arms, shoulders, neck or back:
numbness, or a burning or tingling sensation
aching, soreness or tenderness
pain, swelling or throbbing
stiffness or tightness
coldness or weakness
If you have these symptoms, or any other recurring or persistent discomfort
and/or pain related to computer use, consult a physician immediately and
inform your company's health and safety department.
•
•
•
•
•
The following section provides tips for more comfortable computer use.
Finding your comfort zone
Find your comfort zone by adjusting the viewing angle of the monitor, using a
footrest, or raising your sitting height to achieve maximum comfort. Observe
the following tips:
•
•
•
refrain from staying too long in one fixed posture
avoid slouching forward and/or leaning backward
stand up and walk around regularly to remove the strain on your leg
muscles
viii
Taking care of your vision
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive
room lighting, poorly focused screens, very small typefaces and low-contrast
displays could stress your eyes. The following sections provide suggestions on
how to reduce eyestrain.
Eyes
•
•
•
Rest your eyes frequently.
Give your eyes regular breaks by looking away from the monitor and
focusing on a distant point.
Blink frequently to keep your eyes from drying out.
Display
•
Keep your display clean.
•
•
•
•
•
Keep your head at a higher level than the top edge of the display so your
eyes point downward when looking at the middle of the display.
Adjust the display brightness and/or contrast to a comfortable level for
enhanced text readability and graphics clarity.
Eliminate glare and reflections by:
•
placing your display in such a way that the side faces the window or
any light source
•
•
•
minimizing room light by using drapes, shades or blinds
•
•
using a glare-reduction filter
using a task light
changing the display's viewing angle
using a display visor, such as a piece of cardboard extended from the
display's top front edge
Avoid adjusting your display to an awkward viewing angle.
Avoid looking at bright light sources, such as open windows, for extended
periods of time.
Developing good work habits
Develop the following work habits to make your computer use more relaxing
and productive:
•
Take short breaks regularly and often.
•
•
•
Perform some stretching exercises.
Breathe fresh air as often as possible.
Exercise regularly and maintain a healthy body.
TABLE OF CONTENTS
UNPACKING............................................................................................ 1
ATTACHING / REMOVING THE BASE..................................................... 2
SCREEN POSITION ADJUSTMENT .......................................................... 2
CONNECTING THE POWER CORD.......................................................... 3
SAFETY PRECAUTION............................................................................. 3
CLEANING YOUR MONITOR .................................................................. 3
POWER SAVING...................................................................................... 4
DDC......................................................................................................... 4
CONNECTOR PIN ASSIGNMENT............................................................. 5
STANDARD TIMING TABLE .................................................................... 8
INSTALLATION...................................................................................... 10
MHL (Mobile High-Definition Link) (Only for MHL-input Models)... 11
USER CONTROLS .................................................................................. 12
TROUBLESHOOTING ............................................................................ 19
UNPACKING
Please check the following items are present when you unpack the box, and
save the packing materials in case you will need to ship or transport the
monitor in future.

LCD Monitor

Quick Start Guide


AC Power Cord

AC Adapter

DP Cable (Optional)

MHL Cable (Optional)

DVI Cable
(Optional)

HDMI Cable
(Optional)
EN-1
Audio Cable
(Optional)
ATTACHING / REMOVING THE BASE
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
2.
1.
Attach the monitor stand arm to the Ensure that the base is locked onto the
monitor stand arm.
base.
SCREEN POSITION ADJUSTMENT
In order to optimize the best viewing position, you can adjust the tilt of the
monitor by using both of your hands to hold the edges of the monitor as
shown in the figure below.
The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated
by arrow below.
EN-2
CONNECTING THE POWER CORD





Check first to make sure that the power cord you use is the correct type
required for your area.
This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.
Plug one end of the AC power cord to the adapter, and plug the other end
into an AC outlet.
For unit using at 120 V AC:
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
For unit using at 220/240 V AC (outside of U.S.):
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The
cord set should have the appropriate safety approvals for the country in
which the equipment will be installed.
SAFETY PRECAUTION







Avoid placing the monitor, or any other heavy object, on the power cord
to avoid damage to the cable.
Do not expose the monitor to rain, excessive moisture, or dust.
Do not cover the ventilation slots or openings of the monitor. Always put
the monitor in a place where there is adequate ventilation.
Avoid placing the monitor against a bright background or where sun-light
or other light sources may reflect on the face of the monitor. Place the
monitor just below eye level.
Handle with care when transporting the monitor.
Refrain from giving shock or scratch to the screen, as screen is fragile.
In order to prevent damage to the monitor, do not lift the monitor by its
base.
CLEANING YOUR MONITOR
Please carefully follow the below guidelines when cleaning the monitor.
 Always unplug the monitor before cleaning.
 Use a soft cloth to wipe the screen and cabinet front and sides.
 NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR
CASE.
 PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON
THE LCD DISPLAY SCREEN OR CASE.
 Acer will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaners.
EN-3
POWER SAVING
The monitor will be driven into “Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
State
LED Light
ON
Blue
Power Saving Mode
Amber
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display Data
Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
EN-4
CONNECTOR PIN ASSIGNMENT
24-Pin Color Display Signal Cable*
PIN
Meaning
PIN
Meaning
1.
TMDS Data2-
13.
NC
2.
TMDS Data2+
14.
+5V Power
3.
TMDS Data 2/4 Shield
15.
Logic Ground
4.
NC
16.
Hot Plug Detect
5.
NC
17.
TMDS Data0-
6.
DDC Clock
18.
TMDS Data0+
7.
DDC Data
19.
TMDS Data 0/5 Shield
8.
NC
20.
NC
9.
TMDS Data1-
21.
NC
10.
TMDS Data1+
22.
TMDS Clock Shield
11.
TMDS Data 1/3 Shield
23.
TMDS Clock+
12.
NC
24.
DDC TMDS Clock-
* only for certain models
EN-5
19-Pin Color Display Signal Cable*
PIN
Meaning
PIN
Meaning
1.
TMDS Data2+
10.
TMDS Clock+
2.
TMDS Data2 Shield
11.
TMDS Clock Shield
3.
TMDS Data2-
12.
TMDS Clock-
4.
TMDS Data1+
13.
CEC
5.
TMDS Data1 Shield
14.
Reserved (N.C. on device)
6.
TMDS Data1-
15.
SCL
7.
TMDS Data0+
16.
SDA
8.
TMDS Data0 Shield
17.
DDC/CEC Ground
9.
TMDS Data0-
18.
+5V Power
19.
Hot Plug Detect
* only for certain models
19-Pin Color Display Signal Cable*
PIN
Description
7.
MHL+
9.
MHL-
18.
VBUS
19.
CBUS
5, 11, 17
GND
* only for MHL models
EN-6
20-Pin Color Display Signal Cable*
PIN
Description
PIN
Description
1.
Lane0(p)
11.
GND
2.
GND
12.
Lane3(n)
3.
Lane0(n)
13.
Config1
4.
Lane1(p)
14.
Config2
5.
GND
15.
AUX_CH (n)
6.
Lane1(n)
16.
GND
7.
Lane2(p)
17.
AUX_CH (p)
8.
GND
18.
Hot Plug Detect
9.
Lane3(n)
19.
DP Power_Return
10.
Lane3(p)
20.
DP Power
* only for certain models
EN-7
STANDARD TIMING TABLE
Mode
Resolution
1
VGA
640 x 480
60
Hz
2
VGA
640 x 480
72
Hz
3
VGA
640 x 480
75
Hz
4
MAC
640 x 480
66.66
Hz
5
VESA
720 x 400
70
Hz
6
SVGA
800 x 600
56
Hz
7
SVGA
800 x 600
60
Hz
8
SVGA
800 x 600
72
Hz
9
SVGA
800 x 600
75
Hz
10
MAC
832 x 624
74.55
Hz
11
XGA
1024 x 768
60
Hz
12
XGA
1024 x 768
70
Hz
13
XGA
1024 x 768
75
Hz
14
MAC
1152 x 870
75
Hz
15
VESA
1152 x 864
75
Hz
16
VESA
1280 x 960
60
Hz
17
SXGA
1280 x1024
60
Hz
18
SXGA
1280 x1024
75
Hz
19
VESA
1280 x 720
60
Hz
20
WXGA
1280 x 800
60
Hz
21
WXGA+
1440 x 900
60
Hz
22
WSXGA+
1680 x 1050
60
Hz
23
FHD
1920 x 1080
60
Hz
24
QHD
2560 x 1440
60
Hz
EN-8
* Only for MHL models
Mode
Resolution
1
640 x 480 @60Hz
2
720 x 480p @60Hz
3
720 x 576p @50Hz
4
800 x 600 @60Hz
5
1024 x 768 @60Hz
6
1280 x 720p @60Hz
7
1280 x 720p @50Hz
8
1920 x 1080i @60Hz
9
1920 x 1080i @50Hz
10
1920 x 1080p @30Hz
11
720 (1440) x 480i @60Hz
12
720 (1440) x 576i @50Hz
EN-9
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Digital Cable (Only Dual-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the monitor
and connect the other end to the computer’s port.
1-2 Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
Or connect the MHL cable (Only for MHL-Input Model)(Optional) to the
portable device.
1-3 Connect DP Cable (Only DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
2. Connect the Audio Cable (Optional)
3. Connect the adapter
a. Connect the AC cord to the adapter.
b. Connect one end of the adapter to the monitor and the other end to
a properly grounded, AC outlet.
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
5. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
DC-IN
AUDIO-IN
DP
DVI-D IN
HDMI
DC
HDMI
DVI
DP
DC-IN
AUDIO-IN
DP
DVI-D IN
HDMI
DC-IN
AUDIO-IN
DP
DVI-D IN
HDMI
EN-10
MHL (Mobile High-Definition Link) (Only for MHL-input Models)
Mobile High-Definition Link is a digital interface for transmitting video and
audio from an external portable device. It is also capable of charging a
portable device (5 V @ 500 mA).
Connecting the devices
Plug the MHL-certified cable into the display's HDMI® (MHL) port and the
portable device's HDMI®-out port.
DC-IN
AUDIO-IN
DP
DVI-D IN
HDMI
MHL
DC
MHL
Using MHL
MHL-certified portable devices will automatically display content on the
monitor, provided the output display and audio formats are supported by the
portable device.
When the portable device is in standby mode, the monitor will show a black
screen or turn to standby mode, depending on the portable device's output
signal.
Due to the difference in size and resolution between the monitor and the
portable device, you may find the display quality not as crisp as it appears on
the portable device.
This may be due to the portable device changing the output format.
This monitor only receives content from the portable device. It is not capable
of controlling the portable device.
EN-11
USER CONTROLS
Base Controls
Icon
/
Item
Description
Power button/
indicator
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
OSD functions
Press to view the OSD.
Minus / plus
Exit
Empowering
key
If the OSD is active, press the Minus or Plus button to
toggle between the OSD options.
If the OSD is active, press Auto to exit the OSD.
Press the Empowering key to open the Acer eColor
Management OSD and access the scenario modes.
EN-12
Acer eColor Management
Operation instructions
Step 1: Press “
” Key to open the Acer eColor Management OSD and access
the scenario modes
Step 2: Press ““ or “” to select the mode
Features and Benefits
Main
Menu icon
Sub Menu
icon
Sub Menu
item
Description
N/A
User mode User defined. Settings can be fine-tuned to
suit any situation
N/A
ECO mode Adjusts the settings to reduce power
consumption.
N/A
Standard
mode
N/A
Graphic
mode
N/A
Movie
mode
Default Setting. Reflects native display
capability
Enhances colors and emphasize fine detail.
Pictures and photographs appear in vibrant
colors with sharp detail.
Displays scenes in clearest detail. Presents
great visuals, even in unsuitably-lit
environments.
EN-13
Adjusting the OSD settings
Note: The following content is for general reference only. Actual
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD position and general settings. For advanced settings,
please refer to following page:
EN-14
Adjusting picture quality
1.
Press the MENU key to bring up the OSD.
2.
Using the /  keys, select
Picture from the OSD. Then navigate to
the picture element you wish to adjust.
3.
Use the /  keys to adjust the sliding scales.
4.
The Picture menu can be used to adjust the Brightness, Contrast, Colour
Temp, Blue Light, 6-axis Saturate, 6-axis Hue and other image-related
qualities.
5.
Blue Light: filter out blue light by adjusting different Blue Light showing
ratio - 80%, 70%, 60%, 50%
6.
6-axis Saturate: adjust saturation of red, green, blue, yellow, magenta
and cyan.
7.
6-axis Hue: adjust hue for red, green, blue, yellow, magenta and cyan.
8.
Gamma mode is for user to adjust Tone of luminance. The default value is
2.2. (Standard value for Windows)
9.
Super Sharpness technology can simulate high-resolution images by
boosting the pixel density of the original source. It can make images
sharper and clear.
10. sRGB mode is for user such as DSCs, printers, photographers to get better
color matching representation with the peripheral device.
EN-15
Adjusting OSD settings
1.
Press the MENU key to bring up the OSD.
2.
Using the directional keys, select
OSD from the on screen display.
Then navigate to the feature you wish to adjust.
EN-16
Adjusting miscellaneous settings
1.
Press the MENU key to bring up the OSD.
2.
Using the /  keys, select
setting you want to adjust.
3.
The setting menu can be used to adjust the screen Menu Language and
other important settings.
Setting from the OSD, then navigate the
EN-17
Product information
1.
Press the MENU key to bring up the OSD.
2.
Using the /  keys, select
Information from the OSD. Then the basic
information of LCD monitor will show up for current input.
EN-18
TROUBLESHOOTING
Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem.
(DVI/HDMI/DP Mode)
Problems
Current Status
Remedy

LED ON


LED OFF
No Picture

LED displays amber color


Abnormal Sound
(Only Audio-Input
model)
(Optional)
No sound, or sound level
is too low
EN-19

Using OSD, adjust brightness
and contrast to maximum or
reset to their default settings.
Check the power switch.
Check if AC power cord is
properly connected to the
monitor.
Check if video signal cable is
properly connected at the back
of monitor.
Check if the power of computer
system is ON.
Check the audio cable with the
host PC is connected.
Check if the volume setup of the
host PC is in minimum position
and try to raise the volume
level.
G247HYU
G247HYU
Aug. 20, 2014
EN-20
Acer America Corporation
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110
U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product:
LCD Monitor
Model Number:
G247HYU
SKU Number:
G247HYU xxxxxx
(“x” = 0~9, a ~ z, or A ~ Z)
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.
Suite 1500
San Jose, CA 95110
U. S. A.
Contact Person:
Acer Representative
Phone No.:
254-298-4000
Fax No.:
254-298-4147
EN-21
ENERGY STAR®
Acer’s ENERGY STAR qualified products save you money by reducing energy
costs and helps protect the environment without sacrificing features or
performance. Acer is proud to offer our customers products with the ENERGY
STAR mark.
What is ENERGY STAR?
Products that are ENERGY STAR qualified use less energy and prevent
greenhouse gas emissions by meeting strict energy efficiency guidelines set by
the U.S. Environmental Protection Agency. Acer is committed to offer products
and services worldwide that help customers save money, conserve energy and
improve the quality of our environment. The more energy we can save through
energy efficiency, the more we reduce greenhouse gases and the risks of climate
change. More information refers to http://www.energystar.gov or http://
www.energystar.gov/powermangement
Acer ENERGY STAR qualified products:
• Produce less heat and reduce cooling loads, and warmer climates.
• Automatically go into “display sleep” and “computer sleep” mode after 15 and 30
minute of inactivity respectively.
• Wake the monitor when it is in Active Off mode, move the mouse or press any
keyboard key.
• Computers will save more than 80% energy at “sleep” mode.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks
EN-22
Download PDF