LG | 29UM67-P | Owner`s manual | LG 29UB67-B Owner's manual

Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read the safety information carefully before using the
product.
IPS LED Monitor (LED Monitor) Model List
29UM67
29UB67
34UM67
34UB67
www.lg.com
2
Contents
ENGLISH
ENG
CONTENTS
3
LICENSE
23 INSTALLING LG MONITOR
4
ASSEMBLING AND
PREPARING
26
4
Product Components
28 USER SETTINGS
5
Component and Button Description
29
Customizing settings
8
- How to Use the Joystick Button
29
- Menu Settings
9
Moving and Lifting the Monitor
29
- -Quick Settings
10
Installing the Monitor
30
- -PBP
10
- Assembling the stand base
31
- -Picture
12
- Using the cable holder
33
- -Sound
13
- Installing onto a table
34
- -General
14
- Adjusting the stand height
35
- -Reset
15
- Adjusting the angle
36
- -Picture mode
16
- Pivot feature
17
- Using the Kensington lock
17
- Installing the wall mount plate
18
- Installing to a wall
19
USING THE MONITOR
39
29UM67
19
Connecting to a PC
40
29UB67
19
- DVI connection
41
34UM67
20
- DisplayPort connection
42
34UB67
20
- HDMI connection
43
Factory support mode
21
Connecting to AV Devices
21
- HDMI connection
22
Connecting to External Devices
22
- USB Cable connection - PC
22
- Connecting Headphones
SOFTWARE
Installing The Dual Controller
37 TROUBLESHOOTING
39‌SPECIFICATIONS
(DVI-D/ HDMI/ DisplayPort)
43
HDMI Timing (Video)
43
Indicator
44 PROPER POSTURE
44
Proper Posture for Using the Monitor
LICENSE
3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
VESA, VESA logo, Display Port Compliance Logo and Display Port
Compliance Logo for dual-mode source are all registered trademarks of the
Video Electronics Standards Association.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet
the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
ENG
ENGLISH
LICENSE
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
ENGLISH
ENG
Product Components
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
OPTIONAL ACCESSORIES
Display Port Cable
CD(Owner's Manual) /
The DisplayPort cable may not be
Card
available in some areas.
DVI-D Dual Cable
( This cable is not included in
all countries. )
USB Cable
( This cable is not included
in all countries. )
or
Power Cord
Stand Base
Power Cord
AC-DC Adapter
( Depending on the country )
Stand Body
Stand Base
AC-DC Adapter
HDMI Cable
( Depending on ( This cable is not inthe country )
cluded in all countries. )
Stand Body
Screws
CAUTION
Always use genuine components to ensure safety and product performance.
yy
The product warranty will not cover damage or injury caused by the use of counterfeit components.
yy
NOTE
Note that the components may look different from those shown here.
yy
Without prior notice, all information and specifications in this manual are subject to change to imyy
prove the performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the
yy
retail store where you purchased the product.
The DisplayPort cable may not be available in some areas.
yy
ASSEMBLING AND PREPARING
5
Component and Button Description
ENG
ENGLISH
Power Indicator
yyOn: power is on
yyOff: power is off
Joystick Button
Input Connector
6
ASSEMBLING AND PREPARING
ENGLISH
ENG
Joystick Button /
Power LED
yyOn: power is on
yyOff: power is off
Input Connector
Ports
ASSEMBLING AND PREPARING
7
ENG
ENGLISH
Power Indicator
yyOn: power is on
yyOff: power is off
Joystick Button
Input Connector
Ports
8
ASSEMBLING AND PREPARING
How to Use the Joystick Button
ENGLISH
ENG
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
yy The joystick button is located at the bottom of the monitor.
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
CAUTION
As far as possible, avoid touching the moniyy
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
It is advisable to place the monitor in the
yy
original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconyy
nect the power cord and all cables.
Hold the top and bottom of the monitor frame
yy
firmly. Do not hold the panel itself.
When holding the monitor, the screen should
yy
face away from you to prevent it being
scratched.
If you use the monitor panel without the
yy
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
When moving the monitor, avoid any strong
yy
shock or vibrations to the product.
When moving the monitor, keep it upright,
yy
never turn the monitor on its side or tilt it
sideways.
ENG
ENGLISH
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
9
10
ASSEMBLING AND PREPARING
Installing the Monitor
4 Tighten two screws into the back of the stand
ENGLISH
ENG
body .
Assembling the stand base
29UM67
34UM67
1 Place the screen face down.
CAUTION
To protect the screen from scratches, cover
yy
the surface with a soft cloth.
(Black)
2 First, please insert Stand Body to Stand Base,
Then tighten two screws into the back of the
stand base.
120 mm
or
Stand Body
(Black)
Stand Base
100 mm
CAUTION
(Silver)
3 Check the direction of the standbody
(front, back) and then mount thestand
body onto the stand hinge.
Applying excessive force when tightening
the screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
CAUTION
It may hurt your foot off the stand, so be
careful.
Stand Hinge
Stand Body
ASSEMBLING AND PREPARING
29UB67
34UB67
CAUTION
ENG
ENGLISH
1 Place the screen face down.
Stand Body
To protect the screen from scratches, cover
yy
the surface with a soft cloth.
2
11
1 Remove a tape on the surface of stand body.
Use a tool to attach the stand body as shown
in the figure.
2 Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
3 Tighten the screw to the right.
Stand Base
CAUTION
Stand Body
Tape
It may hurt your foot off the stand, so be
careful.
Stand Base
12
ASSEMBLING AND PREPARING
Using the cable holder
NOTE
ENGLISH
ENG
You can disassemble the stand in the
yy
reverse order of the assembly.
CAUTION
yy Illustrations in this document represent typical procedures, so they may look different
from the actual product.
yy Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
yy Be careful not to hurt your hand on the edges
of the screw covers.
yy Do not carry the monitor upside down by just
holding the base. This may cause the monitor to fall off the stand and could result in
personal injury.
yy When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
ASSEMBLING AND PREPARING
13
Installing onto a table
ENG
ENGLISH
1 Lift the monitor and place it on the table in an
upright position.
Place at least 10 cm away from the wall to
ensure sufficient ventilation.
or
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
or
3 Press the joystick button on the bottom of the
2 Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
29UB67:Press the knob in “
(“
” Open the power).
” state.
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or
yy
installing the monitor. There is risk of electric
shock.
14
ASSEMBLING AND PREPARING
Adjusting the stand height
ENGLISH
ENG
29UB67
34UB67
1 Stand the monitor assembled with the stand
base in an upright position
Head
2 Remove the tape attached to the bottom
back of the stand body and then pull out the
locking pin while pressing the head downward.
Locking Pin
Stand Body
3 The height can be adjusted up to 130.0 mm.
130.0 mm
Tape
Locking Pin
130.0 mm
Head
CAUTION
Once the pin is removed, it is not necessary
yy
to re-insert it to adjust the height.
WARNING
Locking Pin
Do not put your fingers or
yy
hand between the screen
and the base (chassis) when
adjusting the screen's height.
ASSEMBLING AND PREPARING
Adjusting the angle
15
WARNING
ed on the stand base.
2 Adjust the angle of the screen. The angle of the
To avoid injury to the fingers when adjusting
yy
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
screen can be adjusted forwards or backwards
for a comfortable viewing experience.
Rear Side
Rear Side
Rear Side
Front Side
Front Side
Front Side
Be careful not to touch or press the screen
yy
area when adjusting the angle of the monitor.
ENG
ENGLISH
1 Place the monitor in an upright position, mount-
16
ASSEMBLING AND PREPARING
3 Rotate the monitor clockwise as shown in the
29UB67
ENGLISH
ENG
figure.
Pivot feature
The pivot feature allows the monitor to rotate 90
clockwise.
Head
4 Complete the installation by rotating the
monitor 90° as shown below.
Stand
WARNING
To avoid scratching the stand base, make
yy
sure that when rotating the monitor using
the pivot feature, the stand does not make
contact with the monitor.
1 Raise the monitor up to the maximum height.
2 Adjust the angle of the monitor in the direction
of the arrow as shown in the figure.
WARNING
To avoid injury to the fingers when adjusting
yy
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
WARNING
Take care when rotating the monitor if the
yy
cable is connected.
NOTE
An image displayed on the monitor's screen
yy
does not rotate according to the screen
orientation.
ASSEMBLING AND PREPARING
17
Installing the wall mount plate
The Kensington security system connector is located at the back of the Monitor set.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
This monitor supports the specification of the standard wall mount plate or compatible device.
Connect the Kensington security system cable
between the Monitor set and a table.
1 Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
2 Place the wall mount plate onto the monitor
and align it with the screw holes.
3 Using a screwdriver, tighten the four screws to
fix the plate onto the monitor.
Wall Mount Plate
NOTE
The wall mount plate is sold separately.
yy
For more information on installation, refer to
yy
the wall mount plate's installation guide.
Be careful not to use excessive force when
yy
mounting the wall mount plate, as this can
damage the monitor's screen.
NOTE
Use of the Kensingtonlock is optional.
yy
The accessories can be purchased at
your local electronics store.
ENG
ENGLISH
Using the Kensington lock
18
ASSEMBLING AND PREPARING
Wall Mount (A x B)
yy
Installing to a wall
A
ENGLISH
ENG
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
10 cm
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely
fixed to the monitor and to the wall.
1 If you use screw longer than standard, the monitor might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Model
29UM67
34UM67
29UB67
B
CAUTION
Unplug the power cord before moving or inyy
stalling the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a
yy
slanted wall may result in the monitor falling
off, which could lead to injury. Please use
the genuine LG wall mounting bracket. For
more information, contact your local retail
store or a qualified installer.
Applying excessive force when fastening
yy
screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
Use the wall mounting bracket and screws
yy
that conform to the VESA standard. Damage caused by the use or misuse of inappropriate components will not be covered
by the product warranty.
Screw length from outer surface of back
yy
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
34UB67
Wall Mount
(A x B)
Standard
screw
Number of
screws
Wall Mount
Plate
(Optional)
75 x 75
100 x 100
200 x 100
M4 x L10
M4 x L10
4
4
RW120
LSW140
Max.8mm
NOTE
Use the screws specified by the VESA stanyy
dard.
The wall mount kit includes the installation
yy
guide and all necessary parts.
The wall mounting bracket is optional. The
yy
accessories can be purchased at your local
retail store.
The length of the screw may differ for each
yy
wall mounting bracket. Ensure the correct
length screw is used.
For more information, please refer to the
yy
user manual for the wall mounting bracket.
USING THE MONITOR
19
Connecting to a PC
This monitor supports the *Plug and Play
yy
feature.
*Plug and Play: A feature that allows you to
add a device to your computer without having
to reconfigure anything or install any manual
drivers.
DVI connection
Transmits digital video signals to the monitor. Connect the monitor using the DVI cable as illustrated
below.
Press the menu button and then select the input
option from the input menu.
To hear the sound in DVI input mode, connect the
PC's AUDIO OUT port to the monitor's AUDIO IN
(PC) port using the audio cable that came with the
product.
(sold separately)
CAUTION
Connect the input signal cable and
yy
turn in the direction of the arrow.
To prevent disconnection secure
the cable tightly.
Do not press on the screen for a
yy
prolonged period of time. This may cause
image distortion.
Do not display a still image on the screen
yy
for a prolonged period of time. This may
cause image retention. If possible, use the
screen saver.
NOTE
When connecting the power cord to the outyy
let, use a grounded (3-hole) multi-socket or a
grounded power outlet.
yyThe monitor may flicker when turned on in an
area of low temperature. This is normal.
Sometimes red, green, or blue spots may apyy
pear on the screen. This is normal.
Using a DVI to HDMI cable may cause comyy
patibility issues.
ENG
ENGLISH
USING THE MONITOR
20
USING THE MONITOR
ENGLISH
ENG
DisplayPort connection
HDMI connection
Transmits the digital video and audio signals from
your PC to the monitor. Connect your PC to the
monitor using the display port cable as illustrated
below.
Press the menu button and then select the input
option from the input menu.
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
Press the menu button and then select the input
option from the input menu.
(sold separately)
NOTE
There may be no video or audio output deyy
pending on the DP version of the PC.
The DisplayPort cable may not be available
yy
in some areas.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
USING THE MONITOR
21
Connecting to AV Devices
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable as illustrated below.
Press the menu button and then select the input
option from the input menu.
NOTE
If you use HDMI PC, it can cause compatibility
yy
problem.
Use a certified cable with the HDMI logo
yy
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
Recommended HDMI cable types
yy
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
ENG
ENGLISH
HDMI connection
22
USING THE MONITOR
Connecting to External Devices
ENGLISH
ENG
USB Cable connection - PC
Connecting Headphones
The USB port on the product functions as a USB
hub.
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
NOTE
yy Make sure to install the most recent Windows
OS service pack before using the product.
yy Peripheral devices are sold separately.
yy A keyboard, mouse, or USB device can be
connected to the USB port.
CAUTION
Cautions When Using a USB Device
yy A USB device with an automatic recognition
program installed, or that uses its own driver,
may not be recognized.
yy Some USB devices may not be supported or
may not work properly.
yy It is recommended to use a USB hub or hard
disk drive with power supplied. (If the power
supply is not adequate, the USB device may
not be recognized properly.)
29UB67
34UB67
To use USB 3.0, connect the A-B type USB 3.0
cable of the product to the PC.
Peripheral devices connected to the USB IN port
can be controlled from the PC.
(sold separately)
NOTE
yy Peripheral devices are sold separately.
yy If you use angled earphones, it may cause
a problem with connecting another external
device to the monitor. Therefore, it is recommended to use straight earphones.
Angled
Straight
yy Depending on the audio settings of the PC
and external device, headphones and speaker
functions may be limited.
(sold separately)
(sold separately)
INSTALLING LG Monitor Software
23
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
LG Monitor Software.
1 Set the default Web browser to Internet Explorer.
4 Check "I accept the terms of the agreement" on
the License Agreement screen and then click
the [Next] button.
5 Select the program that you want to install.
2 Click the "LG Monitor Software" on the CD's
main screen. When the file download window
appears, click the Run button. (The file download window may vary depending on the operating system and the Internet Explorer version,
but the installation procedures are same.)
NOTE
CAUTION
Service Pack 1 or higher is required for
yy
Windows 7.
3 Follow the instructions to proceed with the
installation.
Screen Split: This program automatically
yy
splits the program window as desired.
True Color Finder: This program calibrates
yy
the precise color output of the monitor to suit
your needs.
ENG
ENGLISH
INSTALLING LG MONITOR SOFTWARE
24
INSTALLING LG Monitor Software
ENGLISH
ENG
6 The LG Monitor Software installation starts as
8 The program you selected on the Select
7 If the TUSB3410 driver has not been installed,
9 When the installation is complete, restart your
shown below.
it will install automatically. Select "Install this
driver software anyway (I)" if the Windows
security message is displayed as below.
Features page will install automatically.
system.
INSTALLING LG Monitor Software
NOTE
Right-click the True Color Finder icon and select
"Start Program" to start the program.
NOTE
To use the True Color Finder function, you
yy
must purchase the supported calibrator.
For details on supported calibrators and
yy
graphic cards, see the True Color Finder
user guide.
If you have changed the input port, it is
yy
recommend that you calibrate the monitor's
picture quality again.
NOTE
If you run Screen Split, the Screen Split icon [
] appears in the system tray at the right bottom of
the PC screen.
Right-click the Screen Split icon and select a
layout you want.
CAUTION
Once you have completed the monitor caliyy
bration with the True Color Finder software,
remove the calibrator from the monitor and
store it at room temperature away from direct
sunlight or put it in the box.
- If the calibrator's measuring part is exposed
to direct sunlight for a long time, this may
cause damage to the calibrator.
- Do not store it in an environment with too
low/high temperature and high humidity.
If any third-party calibration application is
yy
already installed on your PC, the image quality may be affected by a conflict between the
two applications. For the best performance, it
is recommended to uninstall the other calibration application.
ENG
ENGLISH
When you run the True Color Finder software, the
True Color Finder icon
[ ] appears in the system tray at the right bottom
of the PC screen.
25
26
INSTALLING LG Monitor Software
Installing The Dual Controller
ENGLISH
ENG
Insert the software CD included in the product packaging into your PC's CD drive and install the Dual Controller.
The installation screen images are for reference only. The actual installation screen images may vary depending on the model.
1 Set the default Web browser to Internet
Explorer.
2 Click the "Dual Controller" on the CD's main
screen. When the file download window
appears, click the Run button. (The file
download window may vary depending on the
operating system and the Internet Explorer
version, but the installation procedures are
same.)
CAUTION
Service Pack 1 or higher is required for
yy
Windows 7 & Windows 8.1.
3 Follow the instructions to proceed with the
installation.
4 Check "I accept the terms of the agreement" on
the License Agreement screen and then click
the [Next] button.
5 Click the install button.
INSTALLING LG Monitor Software
6 The Dual Controller installation starts as shown
7 When the installation is complete, restart your
system.
NOTE
If you run Dual Controller, the Dual Controller icon
[
] appears in the system tray.
Click the Dual Controller icon and select a layout
you want.
ENG
ENGLISH
below.
27
28
User Settings
USER SETTINGS
ENGLISH
ENG
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick Button
Button
Joystick Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor. You can turn off
the monitor this way at any time, including when the OSD is on.)
◄
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
►
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
▲
▼
Enters the menu features.
Enters the PBP feature.
Main menu disabled Enables the main menu.
Main menu enabled
Enters the picture mode feature.
Main menu disabled Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Main Menu
Menu
Menu
Menu
Exit
Exit
Monitor
Exitoff
Menu
PBP
PBP
PBP
PBP
Long press:
ExitMonitor off
Monitor off
Monitor off
Long press: Monitor off
LongMonitor
press:off
Monitor off
Long press: Monitor off
Description
Menu
Configures the screen settings.
Picture
Mode
Select picture mode to achieve the best display effect.
PBP
Displays the screens of two input modes on one monitor.
Monitor off Turns off the monitor.
Exit
Exits the main menu.
User Settings
29
Customizing settings
ENG
ENGLISH
Menu Settings
-Quick Settings
1 To view the OSD menu, press the joystick button at
2
3
4
5
the bottom of the monitor and then enter the Menu.
Go to Quick Settings > Brightness by moving the
joystick.
Configure the options following the instructions that
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Quick Settings
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume.
NOTE
Jog joystick button down (
yy
) in the Volume menu will
enable/disable the Mute function.
Input
Selects the current input mode.
Ratio
Adjusts the screen ratio.
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
NOTE
The display may look the same for Wide, Original options at the recommended resolution (2560 x
yy
1080).
The ratio is disabled in the interlaced signal.
yy
30
User Settings
-PBP
ENGLISH
ENG
1 To view the OSD menu, press the joystick button at
the bottom of the monitor and then enter the Menu.
2 Go to PBP by moving the joystick.
3 Configure the options following the instructions that
4
5
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > PBP
Description
Sub
Selects the video signal input of the sub screen.
Sound Out
Sound Out have four options.HDMI1, HDMI2, DP, Audio-In.
Swap
Toggles between the main screen and sub screen in PBP mode.
Sub Full
Converts the sub screen of PBP mode to the wide screen.
Ratio
Adjusts the aspect ratio of the main screen or sub screen.
Main Wide
Sub
Displays the video to fit the PBP screen, regardless of the video signal input.
Original
Displays the video in the aspect ratio of the video signal input on the PBP screen.
Wide
Displays the video to fit the PBP screen, regardless of the video signal input.
Original
Displays the video in the aspect ratio of the video signal input on the PBP screen.
User Settings
31
-Picture
the bottom of the monitor and then enter the Menu.
Go to Picture by moving the joystick.
2
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
5
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Picture
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Game
Optimizes the screen for gameplay.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want screen
more bright, you can control brightness in Menu OSD.
Calibration
Applies the value calibrated by True Color Finder.
NOTE
yyRun the True Color Finder program.
yyCalibration settings for DVI / HDMI / DP(DisplayPort) will be saved
separately.
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at
32
User Settings
Picture Adjust
ENGLISH
ENG
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
yy Offset: as a reference for a video signal, this is the darkest color the
monitor can display.
Response Time
Color Adjust
High
The picture of the screen gets brighter.
Low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the
screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use High.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Sets the response time to Off.
Gamma
Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on
the monitor, high gamma values display whitish images and low gamma
values display blackish images.
If user don't want adjusted gamma, user can select Gamma off.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom
Red
Green
Blue
Six Color
You can customize the picture color using Red, Green, and
Blue colors.
Meets the user requirements for colors through adjusting the color and
saturation of the six colors(Red_Hue, Red_Saturation, Green_Hue,
Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_
Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue, Yellow_Saturation, Reset ) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the value,
the more saturated and dark the colors become.
Reset
Returns the color settings to the default settings.
User Settings
33
-Sound
ENG
ENGLISH
1 To view the OSD menu, press the joystick button at
the bottom of the monitor and then enter the Menu.
Go to Sound by moving the joystick.
2
3 Configure the options following the instructions that
4
5
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Sound
Sound Out
Description
Sound Out have four options.HDMI1, HDMI2, DP, Audio-In.
34
User Settings
-General
ENGLISH
ENG
1 To view the OSD menu, press the joystick but-
ton at the bottom of the monitor and then enter the
Menu.
Go to General by moving the joystick.
2
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing (
/ OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > General
Description
Language
To choose the language in which the control names are displayed.
SMART ENERGY
SAVING
High
Enables SMART ENERGY SAVING you can save energy with this energy- high
efficient function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy- low
efficient function.
Off
Disables SMART ENERGY SAVING .
Power LED
Turns the power indicator on the front side of the monitor on/off.
On
The power indicator is automatically turned on.
Off
The power indicator is turned off.
Automatic Standby
The monitor will automatically switch to standby mode after a certain period.
OSD Lock
Prevents incorrect key input.
On
Key input is disabled.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input, and General are disabled.
Off
Key input is enabled.
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
NOTE
Saving Data depends on the Panel. So,those values should be different from each panel and panel
yy
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
If option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom.
yy
User Settings
35
-Reset
ENG
ENGLISH
1 To view the OSD menu, press the joystick but-
ton at the bottom of the monitor and then enter the
Menu.
Go to Reset by moving the joystick.
2
3 Configure the options following the instructions that
4
5
appear in the bottom right corner.
To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Returns to the default settings.
Cancel
Cancel the select.
36
User Settings
-Picture mode
ENGLISH
ENG
1 Press the joystick button on the bottom of the moni2
3
tor.
Go to Picture mode by moving the joystick button to
▲.
Configure the options following the instructions that
appear in the bottom.
Each option is described below.
Joystick Button >
Picture Mode
Picture Mode
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be
adjusted.
Photo
Optimizes the screen to view photos.
Cinema
Optimizes the screen to improve the visual effects of a video.
Game
Optimizes the screen for gameplay.
Reader 1
It is a mode that the screen is adjusted to the best for the newspaper. If you want
screen more bright, you can control brightness in Menu OSD.
Reader 2
It is a mode that the screen is adjusted to the best for the cartoon. If you want
screen more bright, you can control brightness in Menu OSD.
Calibration
Applies the value calibrated by True Color Finder.
NOTE
yyRun the True Color Finder program.
yyCalibration settings for DVI / HDMI / DP(DisplayPort) will be saved
separately.
TROUBLESHOOTING
37
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
Is the power indicator light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "NO SIGNAL"
message on the screen?
yy Check and see if the power cord is connected properly to the power
outlet.
yy Press the Power button.
yy If the display is in sleep mode, try moving the mouse or pressing any
key on the keyboard to bring up the screen.
yy Try to turn on the PC.
yy This message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
yy When the monitor is on "No-Signal" in 5 minutes, the monitor goes to
DPM mode.
Can 't you control some functions in OSD?
Can't you select some menu in
OSD?
yy You can unlock the OSD controls at any time by entering the OSD
lock menu and changing items to off.
ENG
ENGLISH
TROUBLESHOOTING
38
TROUBLESHOOTING
CAUTION
ENGLISH
ENG
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
yy
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yy
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
yy
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
yy Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yy Make sure the video card is properly inserted in the slot.
yy Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
The screen blinks.
yy Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
yy Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yy Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended
resolution?
yy If the selected resolution is HDMI 1080i 60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P.
SPECIFICATIONS
29UM67
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
Video Signal
Input Connector
Power
AC/DC adaptor
Environmental
Conditions
73.025 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 73.025 cm
0.2628 mm x 0.2628 mm
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
DP/HDMI :56 Hz to 75 Hz
Synchronization
Separate Sync.
HDMI IN1, HDMI IN2 , DisplayPort, H/P
Voltage
19 V
2.4 A
Power consumption (Typ.) On mode: 31 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
Type DA-48F19, Asian Power Devices Inc. production
Or type LCAP35, LIEN CHANG ELECTRONIC ENTERPRISE production
Output: 19 V
2.53 A
Operating Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: 5% to 90%
Stand Angle
Adjustment
Dimension
Forwards/Backwards: -5° to 20° (Head)
Weight (Without
Packaging)
6.2 kg
Monitor Size (Width x Height x Depth)
With Stand
70.3 cm x 41.8 cm x 18.1 cm
Without Stand
70.3 cm x 32.8 cm x 6.4 cm
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
ENG
ENGLISH
‌SPECIFICATIONS
39
40
SPECIFICATIONS
ENGLISH
ENG
‌SPECIFICATIONS
29UB67
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
73.025 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 73.025 cm
0.2628 mm x 0.2628 mm
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
DVI: 56 Hz to 75 Hz
HDMI: (AV)25 Hz to 60 Hz
(PC)56 Hz to 75 Hz
DP: 56 Hz to 75 Hz
Synchronization
Separate Sync.
Input Connector DVI-D IN, HDMI IN1, HDMI IN2, DP(DisplayPort) IN, H/P, USB
Power consump- On mode: 31 W (ENERGY STAR® standard)*
tion
Sleep Mode<1.2 W
Off Mode < 0.3 W
Power Input
AC 100-240V ~ 50/60Hz 1.5 A
Video Signal
Environmental
Conditions
Operating Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: 5% to 90%
Stand Angle
Adjustment
Dimension
Forwards/Backwards: -5° to 35° (Head)
Weight (Without
Packaging)
8.6 kg
Monitor Size (Width x Height x Depth)
With Stand
70.3 cm x 40.4 cm x 25.2 cm
Without Stand
70.3 cm x 32.1 cm x 6.4 cm
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS
34UM67
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
Video Signal
Input Connector
Power
AC/DC adaptor
Environmental
Conditions
87 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 87 cm
0.312(H) mm x 0.310(V) mm
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
DP/HDMI :56 Hz to 75 Hz
Synchronization
Separate Sync.
DVI,HDMI IN1,HDMI IN2,DisplayPort,H/P
Voltage
19 V
3.3 A
Power consumption (Typ.) On mode: 43 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.5 W
Type DA-65G 19, Asian Power Devices Inc. production
Or type LCAP39, LIEN CHANG ELECTRONIC ENTERPRISE production
Output: 19 V
3.42 A
Operating Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: 5% to 90%
Stand Angle
Adjustment
Dimension
Forwards/Backwards: -5° to 15° (Head)
Weight (Without
Packaging)
7.3 kg
Monitor Size (Width x Height x Depth)
With Stand
82.9 cm x 46.8 cm x 17.2 cm
Without Stand
82.9 cm x 37.9 cm x 8.2 cm
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
ENG
ENGLISH
‌SPECIFICATIONS
41
42
SPECIFICATIONS
ENGLISH
ENG
‌SPECIFICATIONS
34UB67
LCD Screen
Type
Resolution
Pixel Pitch
Maximum Resolution
Video Signal
Input Connector
Power
AC/DC adaptor
Environmental
Conditions
87 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 87 cm
0.312(H) mm x 0.310(V) mm
2560 x 1080 @ 60 Hz
Recommended Resolution 2560 x 1080 @ 60 Hz
Horizontal Frequency
30 kHz to 90 kHz
Vertical Frequency
DP/HDMI :56 Hz to 75 Hz
Synchronization
Separate Sync.
DVI-D IN,HDMI IN1,HDMI IN2,DP(DisplayPort) IN,H/P,USB
Voltage
19 V
3.3 A
Power consumption (Typ.) On mode: 43 W (ENERGY STAR® standard)*
Sleep Mode ≤ 1.2 W
Off Mode ≤ 0.3 W
Type DA-65G 19, Asian Power Devices Inc. production
Or type LCAP39, LIEN CHANG ELECTRONIC ENTERPRISE production.
Output: 19 V
3.42 A
Operating Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: 5% to 90%
Stand Angle
Adjustment
Dimension
Forwards/Backwards: -5° to 35° (Head)
Weight (Without
Packaging)
8.6 kg
Monitor Size (Width x Height x Depth)
With Stand
82.9 cm x 43.6 cm x 25.2 cm
Without Stand
82.9 cm x 37.9 cm x 4.9 cm
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
SPECIFICATIONS
Display Modes (Resolution)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
720 x 400
31.468
70.08
-/+
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75
+/+
1024 x 768
48.363
60
-/-
1024 x 768
60.123
75.029
+/+
1152 x 864
67.5
75
+/+
1280 x 720
45
60
+/+
1280 x 1024
63.981
60.02
+/+
1280 x 1024
79.976
75.025
+/+
1600 x 900
60
60
+/+
1680 x 1050
65.290
59.954
-/+
1920 x 1080
67.5
60
+/-
2560 x 1080
66.7
60
-/+
1280 x 1080 (PBP only)
67.5
60
-/+
HDMI Timing (Video)
Factory support mode
(Preset Mode)
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
480P
31.50
60
576P
31.25
50
720P
37.50
50
720P
45.00
60
1080P
56.25
50
1080P
67.50
60
Indicator
Mode
LED Color
On Mode
White (Only 15 seconds)
Sleep Mode
Blinking White
Off Mode
Off
Remarks
Remarks
ENG
ENGLISH
Factory support mode
(DVI-D/ HDMI/ DisplayPort)
43
44
PROPER POSTURE
ENGLISH
ENG
PROPER POSTURE
Proper Posture for Using the Monitor
Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level.
Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time
yy
usage.
The stand of the touch monitor allows the product to be used in the optimum position.
yy
Adjust the stand angle to obtain the best view of the screen.
You should be looking
slightly down at the screen.
Adjust the angle
So that there is no reflection
or glare from the screen.
Place your hands gently on
the keyboard, keeping your
arms bent at the elbows and
extended horizontally in front
of you.
Declaration of Conformity
Trade Name: LG
Model : 29UM67, 29UB67, 34UM67, 34UB67
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
MODEL
Refer to ENERGY STAR.gov for more information on the ENERGY STAR program.
SERIAL
As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising