Thermo-Kitty Bed™ Instruction Manual

Thermo-Kitty Bed™ Instruction Manual
WARNING: This is an electrical product. Read all directions and precautions carefully before
operating. Failure to properly follow all directions and instructions may lead to electric shock or fire,
which could cause serious bodily injury.
For household us Only
Important safeguards
When using electrical appliances, basic safety precautions should always be followed including the following:
1. Read all instructions.
2. To protect against electrical hazards, DO NOT immerse cord, plug or appliance in water or other liquid.
3. Close supervision is necessary when used by or near children.
4. ALWAYS unplug from outlet when not in use.
5. DO NOT operate any electrical appliance with a damaged cord or plug, or if the appliance malfunctions or has
been damaged in any manner. RETURN all malfunctioning appliances to the factory for examination.
6. DO NOT use appliance for other than its intended use.
7. DO NOT PUNCTURE HEATER FOR ANY REASON.
8. For use with 110-120 volt AC ONLY.
9. CORD MUST EXIT towards the back of bed, away from normal travel of pet.
10. A liner must separate the pet bed warmer from the stuffing material.
11. When using this product, make sure your pet has the option of sleeping on or OFF the bed.
12. SAVE THESE INSTRUCTIONS FOR YOUR USE.
1.
2.
3.
4.
5.
6.
Instructions
Carefully position heating pad between foam pieces and close the opening so your pet cannot remove the heating
pad. When in use, check the pad to ensure proper positioning.
Turn the bed so the cord is exiting the back of the bed, away from the normal path traveled by your pet.
When cleaning the bedding, unplug and remove the heater so you do not subject it to being immersed in liquids or
cleaners.
Remove cover for washing.
Follow the above instructions when reassembling you THERMO-KITTY BED.
ALWAYS give your pet the choice to lie on OR off the heated bed.
Testing your new THERMO-KITTY BED
After operating 1-2 hours, place your hands on your pet’s new THERMO-KITTY BED for 20-30 seconds, applying
pressure. Your THERMO-KITTY BED is designed to provide mild radiant warmth. THEY DO NOT GET HOT!
MODE D’EMPLOI
1. Placer l’unité chauffante entre les deux morceaux de mousse isolante et fermer l’ouverture afin
que votre animal ne puisse pas sortir l’unité chauffante. S’assurer régulièrement que celle-ci est
bien installée.
2. Placer le panier de façon à ce que le cordon d’alimentation sorte à l’arrière et n’interfère pas
avec
les déplacements de l’animal.
3. Lors du nettoyage du panier, débrancher l’unité chauffante et sortez-la pour ne pas la mouiller
ou
répandre des produits d’entretien dessus.
4. Enlever la housse pour la nettoyer.
5. Suivre les indications susmentionnées lors de la remise de l’unité chauffante dans la housse.
Essai du nouveau THERMO-KITTY BED
Après avoir opréré durant 1 ou 2 heures, placer vos mains sur le nouveau THERMO-KITTY BED de votre
animal et appuyer durant 30 secondes. La meilleure façon de sentir la chaleur dégagée par THERMOKITTY BED est de s’asseoir dessus pour constater que l’animal sera bien au chaud. Pour la sécurité et le
plaisir de votre animal de compagnie THERMO-KITTY BED est conçu pour dégager une tiédeur radiante
agréable. IL NE DEVIENT JAMAIS CHAUD!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising