DIAMOND Fiber Optic Components

DIAMOND Fiber Optic Components
DIAMOND
Fiber Optic Components
CABLE ASSEMBLIES AND ADAPTERS
F-3000™ Family
SINGLE MODE PC/APC
MULTIMODE PC
PS, PSf, PM-PS, PSi, PSm, PSc, PM,
VIS/NIR
Thanks to its different technologies, mechanical and optical interfaces, the
F-3000™ fiber optic connector family can cover the most standard and customized requirements in response to the increasingly customer demands.
The family includes: simplex, duplex and backplane connectors and adapters, as well as a series of network accessories such as: attenuators, hybrid
adapters, transition adapters, terminators, reflectors and receptacles.
FEATURES AND BENEFITS INCLUDE
 Spring-loaded protective cap for high power applications providing
increased safety protection
 Specially designed body to prevent endface damage during mating
 Modular designed mating adapters with metal protective shutters for
high power applications
F-3000™ Simplex
 Diamond composite ferrule (zirconia ceramic sleeve and titanium insert):
- Allows plastic deformation for our Active Core Alignment (A.C.A)
- Unique 0.1 dB Insertion Loss
- Custom drill sizes from 80μm to 280μm
- Superior Ultra polishing
- Custom ferrules for multi-fiber technology
- Ultra-low ferrule O.D. tolerances
F-3000™ Duplex
F-3000™ Backplane 2-4 channels
AVAILABLE TECHNOLOGIES AND OPTICAL INTERFACES
PS optical interfaces: PS collimated, PSf free space, PM-PS, PSi Free standing, PSm Multimode, PSc collimator.
Polarization Maintaining (PM)
VIS/NIR for low wavelengths and small core fibers
Optical Line Identification OLID assemblies
F-3000™ FUSION for easy field termination of MM and SM fibers
F-3000™ Power Solution (PS)
F-3000™ Accessories and transceivers
DIAMOND SA • Via dei Patrizi 5 • CH-6616 Losone - Switzerland
Tel. +41 91 785 45 45 • Fax +41 91 785 45 00 • e-mail [email protected]
the fiber meeting
www.diamond-fo.com
Specifications subject to change
without notice
BDD 1951622 10_16
F-3000™ Family
THE F-3000™ SIMPLEX
The F-3000™ is a small form factor SFF fiber optic connector based onto 1.25 mm ferrule style. It has been recently
standardized as LF3 connector, thus clarifying and ensuring the mechanical compatibility of the F-3000™ connector with the LC adapter. This opens access to a broad field of existing applications, and will be increased with
new customer specific solutions.
STANDARDS
IEC 61 754-28 “Fiber optic interconnecting devices and passive components - Type LF3 connector family”
➢ EN 50377-16-1 Product specification: Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category
B1.1 and B1.3 single mode fibre with titanium composite ferrule for Category C
The LF3 connector is compatible with all IEC 61 754-20 compliant adapters
AVAILABLE AS
Standard terminated connector, also for applications up to 3W
Connector set (to be terminated with Diamond special equipment)
OPTICAL SPECIFICATIONS
MULTIMODE
0° PC
SINGLE MODE
0° PC
SINGLE MODE
8° APC
typ. 0.15 max. 0.4
typ. 0.1 max. 0.4
typ 0.1 max. 0.4
dB
IEC 61300-3-4; λ = 1300/1550nm
typ. 40
min. 50
min. 70*
dB
IEC 61300-3-6; λ = 1300/1550nm
dB
IEC 61300-2-2; λ = 1300/1550nm
dB
IEC 61300-3-4; λ = 1300/1550nm
dB
IEC 61300-3-6; λ = 1300/1550nm
STANDARD
Insertion Loss (IL)
Return Loss (RL)
Repeatability of IL
max. ±0.1
LOW IL VERSION
SINGLE MODE
0° PC
Insertion Loss (IL)
-
Return Loss (RL)
-
Storage temperature
UNITS TEST CONDITIONS
SINGLE MODE
8° APC
typ. < 0.1 max. 0.15 typ. < 0.1 max. 0.15
min. 50
min. 85*
-40/+90**
°C
* Measured with high precision reflectometer
ENVIRONMENTAL CONDITIONS
MEASUREMENT / TEST
PARAMETERS
METHOD
Change of temperature (Reliability)
-40°C / +85°C / 1 h dwell / 500 cycles
IEC 61300-2-22
Low temperature
-51°C / 96 h
MIL-STD-810F
Dry heat (Reliability)
+85°C / 2'000 h
IEC 61300-2-18
MIL-STD-810
Termal shock
-51°C / +71°C / 1 h dwell / 3 cycles
Low pressure, procedure II
4’572 m / 1 h
MIL-STD-810
Low pressure, procedure III
2'438 m to 12’192 m / 60 s
MIL-STD-810
Damp heat, cyclic
(Reliability)
+25°C / +55°C / 95% r.h. / 100 cycles
IEC 61300-2-46
Extended humidity (Reliability)
+85°C / 85% rh / 2’000 h
Telcordia GR-326-CORE
Salt mist
+35°C / 50 g/l / 96 h
IEC 61300-2-26
40 N / 2 min
IEC 61300-2-6
Cable retention
100 N / 2 min
IEC 61300-2-4
Static side load
1 N / 1 h on cable version
0.2 N / 5 min on fibre version
IEC 61300-2-42
Cable torsion
15 N / ±180° / 25 cycles
IEC 61300-2-5
Twist
1.35 Kg / ±1'800° / 10 cycles
Telcordia
GR-326-CORE
Vibration, sinusoidal
10 Hz - 55 Hz / 1.5 mm / 30 min
IEC 61300-2-1
IEC 61300-2-12
MECHANICAL CONDITIONS
Tensile strength of coupling
mechanism
Impact (free fall)
1.5 m / 5 drops
Bending moment
10 N / 2 min
IEC 61300-2-7
Mating durability (Couplings)
500 cycles
IEC 61300-2-2
Flexing of strain relief
2 N / +/-90° / 100 cycles
IEC 61300-2-44
F-3000™ Family
F-3000™ Simplex standard version
Bend protection boot for fiber
DIAMOND two component ferrule Ø 1,25 mm
 Active Core Alignment minimizes fiber core offset
(<0.2 µm) and ensures optimal connector performance
Alberino F-3000TM
fiber version
Easy handling thanks
to additional
operating botton
Cable-boot
Compact injection molded housing
 Connector housing totally encloses
ferrule to optimally protect it from
dust, contaminants and scratches
Crimping sleeve
Alberino F-3000TM
cable version
Positive latching mechanism
 Offers superior retention under axial load
 Allows higher packing densities
Integrated metal protective caps
 Automatically protects personnel from eyedamaging laser radiation
 Closes automatically upon extraction to
protect ferrule from dust and scratches
Metal shutters with integrated spring function
 Engages automatically to protect personnel
from eye-damaging laser radiation
 Angled, anti-reflection surface ensures low
reflectance in unmated state, inducing light diffusion
Alignment
sleeve (zirconia)
Modular designed compact mating adapter with
interchangeable mounting brackets
 Permits dense packing
 Offers several installation solutions
9.5
7.25
F-3000™ s version
The F-3000™ s without protection cap and button is a simplified version of the F-3000 standard connector.
F-3000™ LIFT version
ca. 41
Lift the lever to release
the connector
The ideal solution for special applications with difficult access.
F-3000™ Family
THE F-3000™ DUPLEX
The F-3000™ DUPLEX combines the familiarity of the SFF design and the optical performances of the F-3000™
simplex connector. It is based on components of the F-3000™ simplex version and is joined by a simple clip-bridge
and a widened thumb-latch. The F-3000™ DUPLEX is the ideal solution for applications such as Fiber-to-the X
(FTTX), including FTTC, FTTH, FTTD.
AVAILABLE AS
 Standard terminated connector
 Connector set (to be terminated with Diamond special equipment)
F-3000™ Standard Duplex Adapter and connector
F-3000™ Junior Duplex Adapter and F-3000™ LIFT connector
COLOR KEYING
The F-3000TM Junior system permits the user to specify the color of the mating adapter frame so that different
line types, uses, destinations and points of origin, etc. can be readily identified.
The frame are available in twelve distinct colors:
1.
2.
3.
4.
Blue
Beige (White)
Black
Red
NOTE
5.
6.
7.
8.
Orange (upon request)
Yellow
Green
Violet (upon request)
9.
10.
11.
12.
Grey
Brown (upon request)
Pink (upon request)
Turquoise (upon request)
As standard, Diamond uses colored connector bodies, cable boots and mating adapter housings to identify the fiber type
(SM or MM 50/62.5µm) and ferrule polish (PC or APC).
Diamond`s standard connector/boot/adaptor colors are as follows: Beige/ Black/Beige for MM PC 50µm, Beige/Beige/Beige for MM PC 62.5µm, Blue/Blue/Blue for SM PC, and Green/Green/Green for SM APC. Other colors are available upon request.
F-3000™ Family
THE F-3000™ BACKPLANE
The F-3000™ BACKPLANE combines the advantages of the F-3000™ SYSTEM with an optimal guiding mechanism
for secure backplane connection. When mated, the PCB connector is retained in the mating adapter eliminating
all stress on the PC Board.
It uses the standard components of the F-3000™ single fiber version which are joined by a simple clip-bridge
that includes radial, angular and longitudinal compensation. Clip bridges are available for 2 and 4 connectors.
The F-3000™ BACKPLANE is available in multimode, single mode, 0° (PC) and 8° angle polished (APC) versions.
The F-3000™ Backplane offers the same optical performances as the F-3000™ simplex connector.
The adapters can be easily mounted into the distribution panel.
The F-3000™ Backplane covers all needs in this field of applications and offers:
Active push pull retention
Sufficiently long pre-mating tracks for repeatable mating and high stability
Injection moulded housing (UL 94 V0 flammability rating)
Positive latching mechanism with step process to prevent the backplane and the PCB from stress
Backplane adapter with spring loaded shutters and connectors with protective metal caps
Longitudinal mating compensation
Unique DIAMOND Ø 1.25 mm two component ferrule
AVAILABLE AS
 Standard terminated connector
 Connector set (to be terminated with Diamond special equipment)
F-3000™ Backplane before mating
F-3000™ mated Backplane
F-3000™ Family
THE F-3000™ r AND rs
Current installation techniques for Fiber Optics, either indoor or outdoor, tend to reduce installation times and expenses while keeping
high quality standards.
Diamond’s ferrule assembly for F-3000™ connectors is a compact preconnectorized system which can be used in substitution to a standard
Break-out cable within ducts of very small size or to be blown into
microducts, offering an easy and reliable solution to perform FTTx
installations.
After installation, the ferrule assembly can easily and rapidly be connectorized, avoiding time-consuming and expensive field termination
tools and equipments.
This new Diamond ferrule assembly is available for Singlemode and Multimode fibers in PC 0° version.
Typical applications include FTTx, Telecommunications Networks, CATV, Local Area Networks (LAN) and Data
Processing Networks.
FEATURES AND BENEFITS
Pre-terminated cable system
No need for field splicing and skilled installers
Factory manufacturing including measurement reports
Functioning Warranty and therefore no need for field measurement
equipments
Ferrule assembly manufactured with Diamond Active Core Alignment
Superior optical performances
1,25mm Ferrule assembly
Termination of SFF F-3000™r standard or F-3000™rs connectors suitable
for the new generation of SFF and SFP components
1.25mm Ferrule assembly
(Alberino F-3000™ r)
AVAILABLE AS
 Pre-connectorized ferrule assembly, to be terminated with Diamond special tools
 Typical assemblies are pigtails, patchcords on cable drums from 50 to 400 m
SPECIFICATIONS
MULTIMODE 0° PC
Insertion Loss (IL)
Return Loss (RL)
Repeatability of IL
Service life
Operating temperature
SINGLE MODE 0° PC
typ. 0.25 max. 0.5
UNITS TEST CONDITIONS
dB
IEC 61300-3-4; λ = 1300nm
dB
IEC 61300-3-6; λ = 1300nm
max ±0.15
dB
IEC 61300-2-2; λ = 1300/1550nm
min. 1000 mate/demate cycle
-
According to field experience
-25/+70*
°C
min 40
min 50
* May be further limited by cable specifications
NOTE As standard, Diamond uses colored connector bodies, cable boots and mating adapter housings to identify the fiber type
(SM or MM 50/62.5µm) and ferrule polish (PC or APC). F-3000TM r connector/boot colors are as follows: Black/Black for MM PC 50µm, Black/Beige for MM PC 62.5µm, Black/Blue for SM PC. Other colors are available upon request.
F-3000™ Family
THE F-3000™ POWER SOLUTION (PS)
Diamond F-3000™ PS connector is designed for high power applications up to 3 Watts optical power for SM
fibers. This has been developed to support the continuous rise of higher bitrates and longer transmission distances within DWDM technology.
Diamond PS connectors are based on contacted expanded beam technology; where a section of graded index fiber
is spliced as a collimating lens, which enlarges the beam diameter and reduces power density at the connector
interface. Using Diamond Active Core Alignment (ACA) technology, we can achieve unrivaled low IL performances.
This technology is applicable to most connectors interfaces, but due to safety issues Diamond suggests to use it
on F-3000™ and E-2000™ connectors with integrated metal protection caps and shutters.
F-3000™ PS connectors are available as simplex terminated connectors and backplane 2-4 channels.
FEATURES AND BENEFITS
16x reduced power density
Low Insertion loss and Ultra high polish for High return loss
Integrated metal protection caps and Shutters
STANDARDS
 Passed Performance qualification according to
 Passed Reliability qualification according to
 Passed Long term Damp Heat according to
IEC 61753-2-1, cat. U
IEC 62005-9-2, cat. U
Telcordia GR-032685°C /85% r.h. 2000h
SPECIFICATIONS
IL (dB) AGAINST REFERENCE
CONNECTOR
TYPE
F-3000™ PS
WAVELENGTH
(nm)
Typ.
Max.
1625 - 1550 - 1310
0.2
1060 - 980
0.3
TEST CONDITIONS
RL AGAINST REFERENCE
Connected
PC 0°
APC 4°
0.4
45
75
0.6
35*
60*
IEC 61300-3-4
Unmated
APC 4°
50
IEC 61300-3-6
OLCR method / *OCWR method
* Measured with high precision reflectometer
SAFETY INFORMATION FOR POWER SOLUTION
Cleaning
Cleanliness still remains the key word using high power. The basic concept using PS connectors is therefore the
following:
“before each mating procedure, the connectors must be absolutely clean and inspected with a microscope“.
The ferrule`s surface inspection should be performed using an optical microscope with a magnification of at least
200x. The connector is normally affected by contamination during handling and mating procedures; the degree
of cleanliness of the overall installation is also a critical parameter to be taken into consideration.
Handling
The Power Solution connectors should be operated with high power only when connected. When unmated, the light
source must absolutely be switched off.
Safety
Optical connectors are passive components not subjected to Laser safety, but when integrated in an active system,
as the output side of a light source, they will be submitted to it.
The following aspects are to be taken into account when evaluating the laser safety requirements:
- The exit beam of these connectors have a lower NA as standard connectors in air (NA=0.035) or ca. 2° divergence.
This is used in the calculation of the amount of light that can enter the pupil at 1m.
The following safety precautions are to be considered as a starting point, each is responsible to edict proper safety protocols and
we intend here just as to help doing this. The following precautions should not be considered as sufficient and should be reevaluated
from case to case.
- usage in restricted area, access only for authorized and qualified personnel.
- use protective glasses, skin protective measures recommended.
- optical behavior under control: eliminate reflections (also diffuse), close unused optical channels, avoid light beams at eye level.
- switch on/off system with remote control or interlock and additional automatic switch off safety system.
- warning signal when sources are active.
- laser classification markings and danger indications.
F-3000™ Family
THE F-3000™ FUSION
The F-3000™ FUSION allows you to quickly and easily make field terminations with the performance you expect from Diamond-quality F-3000™
connectors. The key to this system is DIAMOND's advanced "crocodile
alberino" fusion field ferrule assembly. The ferrule assembly consists of a
factory-terminated fiber endface, fiber stub, and integrated splice protection. The fiber endface is core-centered via Diamond’s well-known Active
Core Alignment process and factory-polished to the company’s precise
specifications. The F-3000™ FUSION is then field terminated via a low loss
fusion splice using the new Diamond Zeus D50 Fusion Field Termination
Kit. The F-3000™ FUSION is available for SM and MM fiber (250μm, 600μm
and 900μm) and cable (1.6-to 3.1mm) in both 0° PC or 8° APC versions.
FEATURES AND BENEFITS
Simple, fast and reliable field termination
reduces operator error and cost per termination
No need of glue
Outstanding optical performance
consistent and repeatable low IL / high RL
No polishing
eliminates the need for costly consumables
Fusion spliced pigtail performance and reliability without the cost and
space associated with splice enclosures, trays and protectors
AVAILABLE AS
Connector set, (to be terminated with Diamond special equipment)
COMPATIBLE SPLICERS WITH DIAMOND FUSION CROCODILE
Fitel (Types: S132C, S153, S178)
Sumitomo (Types: 71-C, T81C, Q101-CA
SPECIFICATIONS
Insertion Loss (IL)
Return Loss (RL)
MULTIMODE
0° PC
SINGLE MODE
0° PC
SINGLE MODE
8° APC
typ. 0.2 max 0.5
typ. 0.25 max. 0.5
typ 0.25 max. 0.5
dB
IEC 61300-3-4; λ = 1300/1550nm
min. 40
min. 50
min. 70*
dB
IEC 61300-3-6; λ = 1300/1550nm
dB
IEC 61300-2-2; λ = 1300/1550nm
max. ±0.1
Repeatability of IL
UNITS TEST CONDITIONS
1000 mate/demate cycles
Service life
ZEUS D50 Fusion Splicer
According to field experiences
Operating temperature
-25/+70**
°C
Storage temperature
-25/+70**
°C
* Measured with high precision reflectometer
** May be further limited by cable specifications
F-3000™ FUSION INSTALLATION CONCEPT
2
3
1
2
F-3000™ Family
THE F-3000™ ACCESSORIES AND ACTIVE MODULES
The F-3000™ network accessories are available for many uses and can be deployed at several points in fiber-optic
networks, as well as in LABs or special applications.
These include the following product families:
Attenuators (OAF), transition adapters (Sacrificial Interfaces and UGT), optical termination modules (OTM),
hybrid-adapters, optical reflectors (OGR), multipurpose adapter system (MAS), Interfaces modules (IMOD), and
active modules (SFP transceivers).
OAF F-3000™ ATTENUATORS
Attenuators are used to adapt the transmitted light power to the characteristics of the implanted receiver.
The OAF F-3000™ in-line fixed attenuator provide a precise and repeatable amount of light loss (attenuation) via
a doped fiber. This results in wavelength independent and stable attenuation values for typical wavelength bands
used in telecommunication applications (1260-1360 and 1460-1580 nm). OAF F-3000™ are available in single mode
PC and APC version, for attenuations from 2 dB to 30 dB, for optical power up to +20 dBm.
Other available OAF types are: E-2000™, FC, SC, LSA (DIN) and ST™.
SPECIFICATIONS
SINGLE MODE
0° PC
SINGLE MODE
8° APC
Fiber
Wavelengths
Nominal attenuation
Tolerance*
9/125
µm
1260-1360 and 1460-1580
nm
245 610
15
2025 30
±0.5
±0.5
±0.5
±0.5
±1
±1.5
±2
±2.5
±2.5
<0.5 over service life
Service life
1000 matings (According to field experience)
>45
>65
Temperature range
dB
dB
dB
Repeatability
Return loss
UNITS
-25/+70
dB
°C
* Values measured using 1310 or 1550 nm LED source. Additional IL induced by modal noise 0,05 dB/dB.
The excess attenuation due to the 2 connections may be as high as 0.5 dB max.
F-3000™ SI and UGT (Optical Transition Adapters)
Optical Sacrificial Interfaces are compact, in-line, male-to-female components, especially used in laboratory and
field test equipment to protect front panel connector end-faces from the damage and contamination of repeated
mating and de-mating.The use of sacrificial interfaces avoids costly instrument re-calibration that usually requires
the equipment to be returned to the manufacturer or specialized service centers and eliminates equipment down
time. Diamond Sacrificial Interfaces are available for MM and SM fibers, with different end-face geometries: PC/
PC, APC/APC, to a wide range of international connector standards. UGTs Optical Transition Adapters (male/
female) are also space saving in-line components, mainly deployed to connect different connector geometries,
(eg. from 0° PC connectors to 8° angle-polished APC connector or the reverse).
Other available types are: E-2000™, FC, SC, ST™ and DiaLink.
SPECIFICATIONS
Insertion Loss (IL)*
Return Loss (RL)
Repeatability of IL
Service life
TEST CONDITIONS
SM G. 652D
MM
UNITS
max 0.7 dB
max 0.7 dB
dB
IEC 61300-3-4; λ = 1300/1550nm SM - 850/1300nm MM
PC min 45 / APC min 70**
min 35 dB
dB
IEC 61300-3-6; λ = 1300/1550nm SM - 850/1300nm MM
dB
IEC 61300-2-2; λ = 1300/1550nm SM - 850/1300nm MM
max ±0.3
500 mate/demate cycles
Operating temperature
-40/+85
°C
Storage temperature
-40/+90
°C
* Total Insertion Loss. Additional IL due to modal noise max 0.5 dB
** Measured with high resolution reflectometer HP
Other fibers available upon request
F-3000™ Family
F-3000™ OTM (Optical Termination Modules)
F-3000™ OTM Optical Termination Modules are used as fiber termination on open, unused channels in telecommunication distribution panels, measuring devices and CATV installations, in order to have a stable and lower
back reflection in the system. Other available OTM types are: E-2000™, FC, and SC.
SPECIFICATIONS
SINGLE MODE
0° PC
SINGLEMODE
MODE
SINGLE
PC
8°8°APC
Insertion Loss (IL)
UNITS TEST CONDITIONS
-
NA
min 45
Return Loss (RL)
dB
min 70*
IEC 61300-3-6; λ = 1300/1550nm
500 mate/demate cycles
Service life
Operating temperature
-40/+85
°C
Storage temperature
-40/+90
°C
* Measured with high precision reflectometer
F-3000™ HYBRID ADAPTERS
F-3000™ hybrid adapters ensure a connection between a F-3000™ and SC/FC/ST™/LSA (DIN) fiber optic connectors.
Their optical performance and compact size make is a logical and cost-effective alternative to hybrid patch
assemblies.
SPECIFICATIONS
Insertion Loss (IL)*
MULTIMODE
0° PC
SINGLE MODE
0° PC
SINGLE MODE
8° APC
typ. 0.15
typ. 0.2
typ. 0.2
max ±0.1
Repeatability of IL
Service life
UNITS TEST CONDITIONS
dB
IEC 61300-3-4; λ = 1300/1550nm
dB
IEC 61300-2-2; λ = 1300/1550nm
According to field experience
1000 mate/demate cycles
Operating temperature
-40/+85
°C
Storage temperature
-40/+90
°C
* IL measured using twoo reference cables
NOTE Optical and mechanical specifications are based on the use of the connector of corresponding
standard; the above table reflects typical values.
F-3000™ OGR (Optical Reflectors)
F-3000™ OGR are normally used as fiber termination with the highest possible back reflection.
They are mainly deployed in device manufacturing or LABs for calibration purposes, or for measuring back reflection within fiber-optic components. They are also used to provide reference reflection levels by measuring the
sensitivity of sources to back reflection from other devices.
Other available OGR types are: E-2000™, FC, SC and ST™.
SPECIFICATIONS
SINGLE MODE
PC/APC
UNITS
Return Loss
(Including connector loss)
Typ. 0.5
dB
IEC 61300-3-6; λ = 1310/1550nm
Polarization dependence of
return loss
Typ. 0.2 max. 0.3
dB
IEC 61300-3-2; λ = 1550nm
Wavelength
dependence of return loss
Typ. 0.5 max. 0.8
dB
IEC 61300-3-7; λ = from 1280 to 1580nm
max +/- 0.1
dB
IEC 61300-3-6; λ = 1310/1550nm
Repeatability of RL
Service life
500 mate/demate
TEST CONDITIONS
IEC 61300-2-2
Operating temperature
-25 / +70
°C
Storage temperature
-40 / +85
°C
IEC 61300-2-22
F-3000™ Family
F-3000™ MAS (Multipurpose Adapter System)
The F-3000™ MAS is a modular interchangeable adapter system whose size, ease of cleaning and inspection,
and optical performance make it an ideal choice for high performance applications such as test and measurement equipment.
This system is composed of a flange which provides an internal connection via a FC or Mini-AVIM style connector and a wide range of interchangeable adapters including the F-3000™, E-2000™, FC, SC, ST™ and LSA (DIN).
SPECIFICATIONS
MULTIMODE
0° PC
Insertion Loss (IL)*
Repeatability of IL*
SINGLE MODE
0° PC
SINGLE MODE
8° APC
UNITS TEST CONDITIONS
max 0.25
dB
IEC 61300-3-4; λ = 1300/1550nm
max ±0.15
dB
IEC 61300-2-2; λ = 1300/1550nm
Service life (adapters)
500 mating cycles
Service life (connectors)
1000 mating cycles
Operating temperature
-25/+70
°C
* Measured using two reference connectors. Valid for ferrule type 2.5 mm diameter. For other types, please contact your local DIAMOND representative
F-3000™ IMOD (Interfaces Modules)
The F-3000™ Interface Module (IMOD) has been developed as a half adapter
for free space application of optical connector. These modules are used
more commonly for PC 0° connection, but version for using APC 8° ferrules
can be offered as custom component. The two major reasons for using a
high quality IMOD are the need of repeatable positioning in both axial and
radial direction between each connector and each IMOD.
Other available IMOD types are: E-2000™, FC, SC, ST™, LSA (DIN), MiniAVIM.
SFP MODULES (Transceivers)
The DIAMOND SFP modules (transceivers) allow direct connection (plug
and play) to active components, such as switches, converters, routers etc.
which have SFP ports with a transmission speed of 100Mbit/s respectively
1 Gbits, according to standard IEEE802.3. The main advantage of these
transceivers is the flexibility with which they can be used, according to the
application field.
Features of the duplex SFPs:
 Compatible with F-3000™ and LC connectors styles
 Transmission speed of 100Mbit/s respectively 1 Gbits
 Singlemode or Multimode versions
 Hot swappable
Features of the simplex Bidi SFPs:
 Compatible with F-3000s and LC connector types
 Bi-directional Fiber SFP modules
 Transmission speed of 1 Gbit
 3km on 9/125micron single-mode fiber
 Tx=1310nm Rx=1490nm / Tx=1490nm Rx=1310nm
 Hot swappable
F-3000™ Family
DIAMOND TECHNOLOGIES
POWER SOLUTION OPTICAL INTERFACES FOR F-3000™ CONNECTORS
Diamond uses different methods for expanded beam alignment, depending on the final use of the assembly.
The main expanded beam types can be defined as the following: spliced GRIN lenses and spliced glass rod, or
endcap which provides a Diverging, Collimated or Focused exit beam. These optical interfaces are also suitable
for high power applications.
PS Collimated (Contact)
Diamond offers the Power Solution optical Interface which expands the
MFD of a SM fiber by splicing a GRIN lens at the extremity. The MFD at the
end of the connector is thus expanded by a factor of 4 to 5, increasing the
contact surface by a factor of about 15. As a result the heat issues decrease
but cleanliness of the connectors and mating adapters is still important.
PM-PS Collimated Polarization Maintaining (Contact)
Polarization plays an important role in the industrial photonics market and
when coupled with medium-high power application, creates a highly critical
interface. Sensors and communication systems have been designed using
Polarization Maintaining or Polarizing fibers. Special connectors are required
for such applications, because the connection must be made with a certain
orientation. Only connectors with an orientation key are capable of properly
terminating these fibers.
PSm Power Solution Multimode (Contact)
No standards for large MM connectors has been defined with high power
application in mind. The quality of the contact is critical and the standard
SM fiber optical interface is not sufficient. Diamond has established a new
Optical Interface, the PSm, to fill this void and help end-users to source reliable connectors for these applications.
The optical interfaces use 100% concentricity measurement control and
optical geometry measurements. A special visual inspection completes the
Optical Interface definition.
PSf Free Space (Diverging, non contact)
A glass rod is spliced at the end of a SM fiber. This allows the beam to be
expanded before it exits the glass, diminishing the power density at the
glass-air interface. This technique is used for high-power applications, at the
injection or at the output to minimize the chance of burns at the interface.
Diamond provides the SM Power Solution Freespace Optical Interface using
this technology.
PSi Free Standing
The fiber-end free from epoxy glue allows proper thermal dissipation in the
region of maximum power density.
A proprietary design of mode-stripper can be integrated to obtain laser power
confinement in the fiber core. The amount of power stripped out from the
cladding is a function of the laser Beam Product Parameter (BPP) and of the
receiving fiber core diameter and numerical aperture (NA).
PSc Collimator Systems
Collimators are for use in a wide variety of optical systems.
These modules are designed to collimate or focus light exiting an optical
fiber to a desired beam diameter or spot size a specific distance away. Collimators are used with laser diodes, photodiodes, acoustic-optic modulators
and other fiber optic devices where a specific output is needed.
F-3000™ Family
VIS/NIR LOW WAVELENGTHS
Diamond offers the VIS/NIR optical interface for low wavelengths and
small core fibers on F-3000™ connectors based on the Active Core
Alignment (ACA) technology aiming to achieve unrivaled low IL performances.
9µm
λ=980nm
MFD=6µm
IL<0.4dB
Core
Cladding
Advantages
λ=632nm
MFD=4µm
IL<0.6dB
 Extremely low lateral offset for low insertion loss
 Ultra high polish for hight return loss
λ=532nm
MFD=3µm
IL<0.8dB
λ=405nm
MFD=2.5µm
IL<1dB
OPTICAL LINE IDENTIFICATION (OLiD)
DIAMOND has developed a new network monitoring system which is based
on Fiber Bragg Grating (FBG) technology. In a P2P network installation, this
technology is used to identify each fiber line and manage the Optical Line
Identification OLID information through a data base owned by the network
operator.
Available products
 F-3000™ OLID assemblies, UGT, Outlets
POLARIZATION MAINTAINING (PM)
DIAMOND supplies high-quality solutions to polarization maintaining (PM) and polarizing (PZ) fiber optical interfaces for optimal control of the signal’s polarization state. Low insertion losses (IL) combined with high polarization extinction ratios (PER) and higher return losses (RL) are achieved over very broad spectral ranges thanks to
a combination of accurate optical and mechanical design.
Panda
Bow-Tie
Oval Inner Clad
Oval Core
True optical axis
Connector Key
Geometrical axis
Fast
axis
Panda PCF
Panda Double-Clad
Slow
axis
STANDARD PERFORMANCES
WAVELENGTH (nm)
1625 - 1550 - 1310
1060 - 980
830 - 780
680 - 635
532 - 460
405
TEST CONDITIONS
Lifetime
NOTE
Angular
Error φ
< ±2°
IL (dB)
PER (dB)
RL (dB)
Typ
97% (TBC)
Typ
Min (TBC)
PC 0°
APC 8°
0.15
0.20
0.25
0.30
0.40
0.75
0.30
0.40
0.50
0.60
0.80
1.20
30
30
28
28
27
23
27
26
25
25
24
21
50*
50
40
40
35
35
70*
60*
60**
60**
60**
60**
IEC 61300-3-34
Random mating
IEC 61300-3-40
Low coherence
IEC 61300-3-6
*OLCR method
<OCWR method
**Limited by test conditions
500 mate/demate cycles
- Optical values based upon high-quality Panda and Bow-Tie fibers qualified by Diamond (fiber’s NA 0.12± 0.02).
- Performances based upon E-2000™ optical interfaces; other mechanical interfaces may lead to slightly different results. Please contact Diamond for
details.
- Diamond performs PER measurements according to the crossed-polarizer method (similar to IEC 61300-3-40) that relies upon high-extinction GlanThomson polarizers and incoherent light sources (bandwidth > 10 nm).
- For any other requirement, please contact Diamond.
F-3000™ Family
DRAWINGS AND DIMENSIONS
F-3000™ SIMPLEX CONNECTOR
F-3000TM Simplex connectors 900 µm - 3 mm boot style
Zirconia/metal insert
Plastic
ca 50,5
4,5
ca. 34,56
ca. 55
10,4
ø 1,25
2,25
ø 1,25
10,4 ± 0,1
ca. 11,6
Ferrule material:
External parts:
R
25
9.5
7.25
F-3000TM s Simplex connectors 900 µm - 3 mm boot style
OPTION: LONG THUMB-LATCH
The ideal solution for special applications with difficult access
41.4
ca. 41
Lift the lever to release
the connector
NOTES: - Please contact your local Diamond representative for additional information
F-3000™ Family
F-3000™ SIMPLEX ADAPTERS
F-3000TM Simplex mating adapter with screw fixing clip
CUTOUT DIMENSIONS
.2
+0 0
29.2
,2
ø2
11,5
4,6
11.3
7.1+0,1
0
F-3000TM Simplex mating adapter with quick fixing clip
29.2
7
4,6
11,5
11,7
+0,1
0
14,6
+0,1
0
7.1
Max wall thickness 1.6 mm
F-3000™ DUPLEX CONNECTOR
F-3000TM Duplex connectors 900 μm - 3 mm boot style
ca 50,5
ca. 34,5
10,75
ø 1,25
2,25
6,25
ca. 11,6
10,4
ø 1,25
10,4
± 0,1
16
±0,1
(M
7
11,7 +0,1
0
14,05
2)
F-3000™ Family
F-3000™ DUPLEX ADAPTERS
F-3000TM Duplex mating adapter with screw fixing clip
CUTOUT
29.2
17.5
13.2 +0.2
0
13
Front side
±0.1
13.25 +0.2
0
13.25
21.5
14.05
(M2) ø2.2 +0.2
0
F-3000TM Duplex mating adapter with quick fixing clips
CUTOUT
29.2
13.5 +0.2
0
13.2 +0.2
0
13
13.25
15.8
14.6
Front side
Max wall thickness 1.6mm
F-3000TM Duplex mating adapter with 45° screw fixing clip
CUTOUT
11.5
Shown as left orientation
Front side
max. 1.7
13.2 +0.2
0
21.5
13
21 +0.2
0
±0.1
11.5
13.25
17.5
29.2
Front side
(M2) ø2.2 +0.2
0
F-3000™ Junior mating adapter with quick fixing clip (Typ B: for excellent stability within SC cutout)
27
12.8
CUTOUT
13.3 ±0.2
15.2
A)
9.5
+0.5
0
9.35
Max wall thickness 1.6mm
Front side
F-3000™ Junior mating adapter with screw fixing clip
CUTOUT
22
18 ±0.1
13.3 ±0.2
(M2) ø2.2 ±0.2
9.5
9.35
+0.5
0
27
12.8
14.8
Front side
45°
F-3000™ Family
F-3000™ BACKPLANE CONNECTOR AND ADAPTERS
Ferrule material:
External parts:
2,2
F-3000TM Backplane connectors on 900 µm fiber, without boot
Zirconia/copper-nickel alloy insert
Plastic
(8,1)
ø 1,25
ca. 25,4
4,5
NOTE Standard connector colors are: MM 50µm; and MM 62.5µm (beige);
SM PC (blue); SM APC (green).
F-3000TM PCB adapters, 2 and 6 channels
Material:
PBT (black)
24,75
6,9
6,9
18,45
18,45
3x6,25=(18,75)
6,25
12,35
F-3000TM Backplane adapters, 2 and 4 channels
Material:Plastic
Mating sleeve:
Zirconia
NOTE Standard colors are: MM PC (beige); SM PC (blue); SM APC (green).
8
52,3
8
52,3
52,3
13
13
13
8
13,25
6.25
24,95
3x6,25=(18,75)
21,4
17,4
13
17.5
21.3
12,5
F-3000™ Family
CUTOUT DIMENSIONS
4 channel unit
2 channel unit
25,1
+0,1
0
6,45
6,8
17,4
13,3 +0,1
0
8,5
12,5
ø2,2
MODULAR MOUNTIG
4 channel - 2 channel
unit combined
2 channel unit
4 channel unit
25,4
20 min.
17,4
17,5
17,5
17,4
14 min.
APPLICATION NOTES
0,25
Fiber optic connectors for backplane also require the pre-mating of all involved components, to prevent lateral
forces, while mated. For repeatable and secure pre-mating and mating procedures, the F-3000™ BACKPLANE has
a high adaptation degree of the connectors on the PC Board to the backplane mating adapter.
The system is designed to recover lateral misalignment up to ±0.5 mm.
.8
0,5
15
ø3
Max.18
39.5 +10
.8
± 0,5
ø3
Max. 18
36
+1
0
7
F-3000™ Family
PROPOSED SPACE REQUIREMENT AND CONTROL ZONE
The F-3000TM BACKPLANE mechanism guarantees secure retention and eliminates stress at the PC Board when
mated. After completion of the mating procedure the system allows a longitudinal way compensation.
Pre-mating
80,6
Contact and retention
51.2
Longitudinal compensation
48.8
Standard ø1.25 mm Zirconia/Cu-Ni alloy
Zirconia
Standard blue plastic housing for PC, and green for APC version.
11.5
Ferrule type:
Alignment sleeve:
External parts:
29,95
6.25
32.55
0°/8°
External parts:
Black plastic
for SM with marking for PC and APC side;
Beige plastic for MM
OTM F-3000™
Standard blue plastic housing and latch for PC and green
for APC (ø1.25 mm Ferrule).
6,25
SACRIFICAL INTERFACE / UGT F-3000™
0°/8°
31,7
(12.27)
OAF F-3000™
F-3000™ Family
F-3000™ HYBRID ADAPTERS
12.2
1.5
HYB. F-3000™/LSA (DIN)
)/ø2.2
(M2
+0.2
0
6.85
11.6
2.2
Max
wall thickness
3 mm
20
+0.2
0
16 ±0.1
5.5 D11
11.5
M 5.5x0.5
4.5 D11
Max
wall thickness
2 mm
ca 27
7
+0.2
0
9
ca. 22
HYB. F-3000™/FC
b
3
2)
/Ø
2.
2
0
+0
.
2
5.95
)/ø2.2
20
6.85
11.6
6.85
2.2
9
+0
0 .2
+0.2
0
+0.2
0
16 ±0.1
M8 x0.5
(M
(M2
Max
wall thickness
2 mm
Max
wall thickness
2 mm
7
+0.2
0
9
28.4
HYB. F-3000™/SC
3
9
2)
/Ø
2.
2
0
+0
.2
12.3
.2
13.1+0.4
0
20
6.85
11.6
Max
wall thickness
2 mm
2.2
Max
wall thickness
2 mm
+0.2
0
+0.2
0
16 ±0.1
6.85
9.3
9.5+0.5
0
(M
)/ø2
(M2
7
+0.2
0
12.8
ca. 39,12
ca. 35.7
HYB. F-3000™/E-2000™
17.6
9.2+0.2
0
)/ø2.2
+0.2
0
+0.2
0
+0
0
2
2.
2)
/Ø
Max
wall thickness
2 mm
(M
Max
wall thickness
2 mm
.2
6.5
22
11.6
18
±0.1
12.9
18
±0.1
13.3±0.2
(M2
ca. 33,4
OGR F-3000™ (LC)
ca. 31,8
10,4 +-0,1
7 +0.2
0
9
F-3000™ Family
F-3000™ MAS (MULTIPURPOSE ADAPTER SYSTEM)
5.3
14
4
10.6
M2
15
11.6
CUTOUT
DIMENSIONS
6.45
10.6
M2
1
11.6
15
11.6
ø 10.5
CUTOUT
DIMENSIONS
10.6
(21)
14.5
(16.65)
7
ø 2.5
ø 1.25
(11.5)
ø2,3
1
14
16.1
9
3
16
A
6.85
20
F-3000™ IMOD (INTERFACE MODULE)
1
10.6
(16.75)
MAS F-3000™
1
14
4
M 5 x 0.5
MAS Universal flange (Mini-AVIM interface)
ø 10.5
11.6
M 8 x 0.75
1
MAS Universal flange (FC interface)
ORDER INFORMATION
Please contact your nearest local Diamond representative or visit www.diamond-fo.com website.
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement