Asus | ZE551ML-6J151RU | Operating instructions | ASUS ZenFone ZE550ML-1A010WW 16GB 4G Black smartphone

Side features
Second Edition/ March 2015
Rear features
Audio jack
Model: ASUS_Z008D (ZE550ML),
ASUS_Z00AD (ZE551ML)
Charging your ASUS Phone
To charge your ASUS Phone:
Flash
1. Connect the USB connector into the power adapter’s
USB port.
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
Power key Microphone
Rear camera
Volume key
2. Connect the other end of the micro USB cable to
your ASUS Phone.
3. Plug the power adapter into a wall socket.
3
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
User Guide
1
Rear cover
Front features
2
P-sensor/Light sensor
Power key
Front camera
LED indicator
IMPORTANT!
Groove
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the micro USB
cable to your computer’s USB 2.0 / USB 3.0 port.
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
Receiver
Touch screen
display
Microphone Micro USB port
Speaker
•
NOTES:
NOTE: Pry open the rear cover from the groove.
•
Remove the rear cover to display the dual micro
SIM and microSD card slots.
NOTES:
•
The micro SIM card slots support WCDMA, DCHSPA, GSM/EDGE, and FDD-LTE network bands.
The microSD card slot supports microSD and
microSDHC card formats.
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
The input voltage range between the wall outlet
and this adapter is AC 100V - 240V. The output
voltage of the micro USB cable is +9V=2A, 18W /
+5.2V=1.35A, 7W.
•
Touch keys
•
E10273
Installing a micro SIM card
Installing a microSD card
Turning your ASUS Phone on or off
FCC Regulations:
IC Regulations:
To install a micro SIM card:
To install a microSD card:
1. Locate the groove on the
bottom-right corner of your
ASUS Phone.
1. Locate the groove on the
bottom-right corner of your
ASUS Phone.
Press the power key at the top of your ASUS Phone to
power the device on or to power it off.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two
conditions:
Power key
Changes or modifications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment.
2. Pry the cover loose
and then pull the rear
cover off.
2. Pry the cover loose
and then pull the rear
cover off.
3. Insert the micro SIM card into one of
the slots.
3. Insert the microSD card into
the microSD card slot.
Micro SIM card 1
Micro SIM card 2
IMPORTANT: Use only a micro SIM card on your ASUS
Phone. A trimmed SIM card may not properly fit into and
may not be detected by your ASUS Phone.
NOTE: Micro SIM card slot 1 supports 4G/3G/2G
network bands. Micro SIM card slot 2 supports 2G
network band only.
CAUTION: Do not use sharp tools or solvent on your
device to avoid scratches on it.
IMPORTANT: The first time you power on your ASUS
Phone, you will see the Welcome screen. Touch the
menu to select your preferred language then touch Next
Step. Follow the onscreen instructions to set up your
ASUS Phone.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV
technician for help.
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
CAN ICES-3(B)/NMB-3(B)
The device could automatically discontinue transmission
in case of absence of information to transmit, or
operational failure. Note that this is not intended to
prohibit transmission of control or signaling information
or the use of repetitive codes where required by the
technology.
-
the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
-
the maximum antenna gain permitted for devices
in the band 5725–5825 MHz shall comply with the
e.i.r.p. limits specified for point-to-point and non
point-to-point operation as appropriate.
The IC ID for this device is 3568A-Z00AD.
RF Exposure Information (SAR)
CE RF Exposure Compliance
This device has been tested and meets applicable limits
for Radio Frequency (RF) exposure.
This device meets the EU requirements (1999/519/EC)
on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
Specific Absorption Rate (SAR) refers to the rate at which
the body absorbs RF energy. SAR limits are 1.6 Watts
per kilogram (over a volume containing a mass of 1 gram
of tissue) in countries that follow the United States FCC
limit and 2.0 W/kg (averaged over 10 grams of tissue)
in countries that follow the Council of the European
Union limit. Tests for SAR are conducted using standard
operating positions with the device transmitting at its
highest certified power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device at least
10 mm away from your body to ensure exposure levels
remain at or below the as-tested levels. Choose the belt
clips, holsters, or other similar body-worn accessories
which do not contain metallic components to support
operation in this manner. Cases with metal parts may
change the RF performance of the device, including its
compliance with RF exposure guidelines, in a manner
that has not been tested or certified, and use such
accessories should be avoided.
The highest FCC SAR values for the device are as
follows:
•
0.92 W/Kg (Head)
• 0.87 W/Kg (Body)
The FCC has granted an Equipment Authorization for
this device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can
be found under the Display Grant section of www.fcc.gov/
oet/ea/fccid after searching on FCC ID: MSQZ00AD.
For body-worn operation, this device has been tested and
meets the ICNIRP guidelines and the European Standard
EN 62209-2, for use with dedicated accessories. SAR is
measured with this device at a separation of 1.5 cm to
the body, while transmitting at the highest certified output
power level in all frequency bands of this device. Use of
other accessories which contain metals may not ensure
compliance with ICNIRP exposure guidelines.
CE Mark Warning
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
Safety information
NOTES:
ASUS Phone care
•
To use the GPS positioning feature on your ASUS Phone:
•
•
Ensure that your device is connected to the
Internet before using Google Map or any GPSenabled apps.
The battery
The charger
•
For first-time use of a GPS-enabled app on your
device, ensure that you are outdoors to get the
best positioning data.
•
Use only the charger supplied with your ASUS
Phone.
•
When using a GPS-enabled app on your device
inside a vehicle, the metallic component of the car
window and other electronic devices might affect
the GPS performance.
Your ASUS Phone is equipped with a high performance
non-detachable Li-Ion battery. Observe the maintenance
guidelines for a longer battery life.
•
Never pull the charger cord to disconnect it from the
power socket. Pull the charger itself.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition
of conformity.The highest CE SAR values for the device
are as follows:
•
AT
BE
BG
CH
CY
CZ
DE
DK
EE
ES
FI
FR
GB
GR
HU
IE
IT
IS
LI
LT
LU
LV
MT
NL
NO
PL
PT
RO
SE
SI
SK
TR
For France, headphones/earphones for this device are
compliant with the sound pressure level requirement
laid down in the applicable EN 50332-1:2000 and/or
EN50332-2:2003 standard required by French Article
L.5232-1.
EC Declaration of Conformity
EC Declaratie de Conformitate
Noi, subsemnaii,
We, the undersigned,
Manufacturer:
ASUSTeK COMPUTER INC.
Productor:
ASUSTeK COMPUTER INC.
Address:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Adres:
Strada PEITOU Nr 150, Li-TE etaj 4, TAIPEI 112, TAIWAN
Reprezentant autorizat în Europa:
Authorized representative in Europe:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
ASUS COMPUTER GmbH
Adres, Ora:
Strada HARKORT Nr 21-23, RATINGEN 40880
ar:
Germania
declarm c urmtorul aparat:
declare the following apparatus:
Product name :
ASUS Phone
Nume produs:
ASUS Phone
Model name :
ASUS_Z00AD ; ASUS_Z008D
Nume model:
ASUS_Z00AD ; ASUS_Z008D
este conform cu cerinele eseniale ale urmtoarelor directive:
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directiva
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 55022:2010+AC:2011
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
DO NOT throw this product in municipal
waste. This product has been designed
to enable proper reuse of parts and
recycling. The symbol of the crossed out
wheeled bin indicates that the product
(electrical, electronic equipment and
mercury-containing button cell battery)
should not be placed in municipal waste.
Check local regulations for disposal of
electronic products.
DO NOT throw this product in fire. DO
NOT short circuit the contacts. DO NOT
disassemble this product.
Do not remove the non-detachable Li-on battery as
this will void the warranty.
Caution
•
Avoid charging in extremely high or low temperature.
The battery performs optimally in an ambient
temperature of +5 °C to +35 °C.
Your ASUS Phone is a high quality piece of equipment.
Before operating, read all instructions and cautionary
markings on the (1) AC Adapter.
•
Do not remove and replace the battery with a nonapproved battery.
•
•
Do not remove and soak the battery in water or any
other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between -10 °C
(14 °F) and 35 °C (95 °F).
•
•
Do not remove and short-circuit the battery, as it
may overheat and cause a fire. Keep it away from
jewelry or metal objects.
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required, return
the unit to an authorized service center. If the unit
is disassembled, a risk of electric shock or fire may
result.
•
Do not remove and dispose of the battery in fire. It
could explode and release harmful substances into
the environment.
•
Do not short-circuit the battery terminals with metal
items.
•
Do not remove and dispose of the battery with your
regular household waste. Take it to a hazardous
material collection point.
•
Do not touch the battery terminals.
If a TOOL is necessary to gain access to an OPERATOR
ACCESS AREA, either all other compartments within
that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or
such compartments shall be marked to discourage
OPERATOR access.
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1 (2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2013-10)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 300 330-1 V1.7.1(2010-02)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001
EN 50566:2013
EN 62479:2010
EN 62311:2008
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1 (2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2013-10)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 300 330-1 V1.7.1(2010-02)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001
EN 50566:2013
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50385:2002
EN 62209-1:2006
EN 62209-2:2010
EN 60950-1 / A12:2011
EN 60065:2002 / A12:2011
Regulation (EC) No. 1275/2008
Declaration
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50385:2002
EN 62209-1:2006
EN 62209-2:2010
EN 60065:2002 / A12:2011
Directiva 2009/125/EC-ErP
2009/125/EC-ErP Directive
Regulation (EC) No. 642/2009
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
Directiva 2006/95/EC-LVD
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011
Regulation (EC) No. 278/2009
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Directive
Ver. 140331
Regulation (EC) No. 617/2013
Directiva 2011/65/EU-RoHS
Ver. 140331
Însemnul CE
CE marking
Declaration Date: 09/02/2015
Year to begin affixing CE marking: 2015
Position :
CEO
(Însemnul de conformitate EC)
Name :
Jerry Shen
Poziia:
Nume:
Data declaraiei: 09/02/2015
Anul aplicrii însemnului CE: 2015
Signature : __________
EC Declaração de Conformidade
CEO
Jerry Shen
Semntura: __________
EC Uygunluk Beyanı
Nós, os abaixo assinados,
Biz, bu imza altındakiler
Fabricante:
ASUSTeK COMPUTER INC.
Üretici:
ASUSTeK COMPUTER INC.
Morada:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Adres:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Representante autorizado na Europa:
ASUS COMPUTER GmbH
Avrupa’daki Yetkili:
Morada, Cidade:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
ASUS COMPUTER GmbH
Adres, ehir:
HARKORT STR. 21-23, 40880 RATINGEN
Ülke:
ALMANYA
Nome do Produto :
ASUS Phone
Ürün adı :
ASUS Phone
Modelo :
ASUS_Z00AD ; ASUS_Z008D
Model adı :
ASUS_Z00AD ; ASUS_Z008D
EN 55022:2010+AC:2011
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1 (2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2013-10)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 300 330-1 V1.7.1(2010-02)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001
EN 50566:2013
EN 62479:2010
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50385:2002
EN 62209-1:2006
EN 62209-2:2010
Copyright © 2015 ASUSTeK COMPUTER INC.
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2013-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-10)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50385:2002
EN 62209-1:2006
EN 62209-2:2010
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS. Any
and all rights, including without limitation, in the Manual or website, and
shall remain the exclusive property of ASUS and/or its licensors. Nothing
in this Manual intends to transfer any such rights, or to vest any such
rights to you.
2006/95/EC-LVD Direktifi
2006/95/EC-LVD Directiva
EN 60950-1 / A12:2011
EN 60065:2002 / A12:2011
EN 60065:2002 / A12:2011
2009/125/EC-ErP Direktifi
2009/125/EC-ErP Directiva
Regulation (EC) No. 642/2009
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R&TTE Directiva
1999/5/EC-R&TTE Directiva
Regulation (EC) No. 1275/2008
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support:
http://vip.asus.com/eservice/techserv.aspx
2004/108/EC-EMC Directiva
2004/108/EC-EMC Directiva
EN 60950-1 / A12:2011
Should you have any questions or comments regarding
this matter, please contact us.
Aaıdaki direktiflerin gereksinimlerine uyduunu deklare ederiz:
se encontra em conformidade com as exigências essenciais das seguintes directrizes:
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V6.2.1 (2013-04)
EN 301 908-2 V6.2.1(2013-10)
EN 301 908-13 V6.2.1(2013-10)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 300 330-1 V1.7.1(2010-02)
EN 300 330-2 V1.5.1(2010-02)
EN 50360:2001
EN 50566:2013
EN 62479:2010
EN 62311:2008
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to this
model. The IMEI of each unit is factory set and cannot
be altered by the user and that it complies with the
relevant IMEI integrity related requirements expressed
in the GSM standards.
Aaıdaki ürünün:
declaramos que o seguinte produto:
EN 55022:2010+AC:2011
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
ASUS
Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI
112, TAIWAN
Tel: 886228943447
Fax: 886228907698
1999/5/EC-R&TTE Directiva
1999/5/EC-R&TTE Directive
(EC conformity marking)
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
•
0.351 W/Kg (Head)
• 0.332 W/Kg (Body)
This device is restricted for indoor use only when
operating under 5150 MHz to 5350 MHz of frequency
range.
For 5GHz WLAN: This equipment may be operated in:
Use your ASUS Phone in an environment with
ambient temperatures between -10 °C (14 °F) and
35 °C (95 °F).
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Directiva
Ver. 140331
(Marca de Conformidade EC)
Ver. 140331
(EC uygunluk iareti)
Pozisyon : CEO
sim :
Jerry Shen
Posição : CEO
Nome :
Jerry Shen
Data da declaração: 09/02/2015
Ano para começar a aposição da marca CE: 2015
Regulation (EC) No. 278/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Direktifi
CE iareti
Marca de CE
Assinatura : __________
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
•
Prevention of Hearing Loss
CE marking for devices with wireless LAN/
Bluetooth
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our
commitment to the highest standards for protecting our
environment. We believe in providing solutions for you
to be able to responsibly recycle our products, batteries,
other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm
for detailed recycling information in different regions.
Using GPS (Global Positioning
System) on your ASUS Phone
Deklarasyon Tarihi: 09/02/2015
CE aretinin Eklendii Yıl: 2015
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF
ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS
MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND
ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
mza : __________
15060-53300300
Operator access with a tool
Download PDF

advertising