Swordfish | 40050 | Operating instructions | Swordfish 40050 pencil sharpener

Swordfish 40050 pencil sharpener
Please read the following instructions
before operating your sharpener.
Sketch Electric
Pencil Sharpener
l To be used under adult supervision only.
Model
Product Code
Replacement
Blade Code
Compatible Pencil
Size(s)
Sketch
40050
40805
8mm
Operating
Instructions
1 Press machine down firmly on a stable, flat surface to
activate suction feet.
2 Check the shavings drawer is correctly fitted.
3 Connect the electricity plug to a standard power
socket.
4
4 Gently insert pencil horizontally into pencil opening
5 Sharpening will start automatically
6 Keep pencil straight to avoid uneven sharpening
7 Once the pencil has its desired point, the machine
will automatically stop sharpening
8 Remove the pencil from the pencil opening to
deactivate the machine
1
2
Cleaning
Safety Switch
Regular cleaning will ensure that your sharpener operates efficiently.
l This sharpener is fitted with a safety switch ensuring that it cannot
be operated unless the shavings tray is fully in place.
l Use a small brush (e.g. paintbrush or toothbrush) to clean the
cutting blade. Never use metal objects as this may damage the
cutting blade.
l The shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
as alcohol or thinner.
Coloured Pencils
l Sharpening coloured pencils causes wax to build up on the
sharpener blade.
l We recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
l If excessive build up occurs then clean the blade as per the
instructions above.
Thermal cut-out system
l This sharpener is suitable for intermittent use and should not be
used continuously for more than 12 minutes.
Continual use will cause the thermal cut-out system to activate.
This is a safety feature and the sharpener will require a cool down
period of approx. 20-30 minutes before it is ready for use.
Replacement Blades
l As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code 40023.
For troubleshooting and product support, please visit www.swordfishsupport.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising