Swordfish | Varipoint Pencil Sharpener | Operating instructions | Swordfish Varipoint Pencil Sharpener

Swordfish Varipoint Pencil Sharpener
Please read the following instructions
before operating your sharpener.
VariPoint Electric
Pencil Sharpener
l To be used under adult supervision only.
Model
Product Code
VariPoint
40232
Replacement
Blade Code
Compatible Pencil
Size(s)
40236
8mm
Operating
Instructions
1 Place the sharpener on a flat surface close to an easily
accessible socket outlet. Plug the sharpener into the
wall socket using the power cable provided.
2
2 Select the desired Point Sharpness using the lever
and insert the pencil centrally, holding it firmly but
pressing only lightly.
3 The sharpener will automatically sharpen and stop
when the pencil is sharp.
4 Remove the pencil.
5 Empty the shavings tray by holding it over a waste
bin and sliding it out horizontally from the main
sharpener unit.
!
5
Do not allow shavings to over-fill the tray as this
can cause serious damage to the mechanism.
Cleaning
Safety Switch
Regular cleaning will ensure that your sharpener operates efficiently.
l This sharpener is fitted with a safety switch ensuring that it cannot
be operated unless the shavings tray is fully in place.
l Use a small brush (e.g. paintbrush or toothbrush) to clean the
cutting blade. Never use metal objects as this may damage the
cutting blade.
l The shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
as alcohol or thinner.
Coloured Pencils
l Sharpening coloured pencils causes wax to build up on the
sharpener blade.
l We recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
l If excessive build up occurs then clean the blade as per the
instructions above.
Thermal cut-out system
l This sharpener is suitable for intermittent use and should not be
used continuously for more than 20 minutes.
Long continual use will cause the thermal cut-out system to
activate. This is a safety feature and the sharpener will require
a cool down period of approx. 30 minutes before it is ready for use.
Replacement Blades
l As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code 40236.
l To download instructions on how to change the blade, visit
www.snopakebrands.com.
For troubleshooting and product support, please visit www.swordfishsupport.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising