Swordfish 40233 Operating instructions

Swordfish 40233 Operating instructions
Please read the following instructions
before operating your sharpener.
MultiPoint Electric
Pencil Sharpener
l To be used under adult supervision only.
Product Code
Blade Code
Compatible Pencil
6, 7, 8, 9,
10 & 11mm
1 Place the sharpener on a flat surface close to an easily
accessible socket outlet. Plug the sharpener into the
wall socket using the power cable provided.
2 Rotate the dial to select the correct aperture for the
pencil in use, then insert the pencil centrally, holding
it firmly but pressing only lightly.
3 The sharpener will automatically sharpen and stop
when the pencil is sharp.
4 Remove the pencil.
5 Empty the shavings tray by holding it over a waste
bin and sliding it out horizontally from the main
sharpener unit.
Do not allow shavings to over-fill the tray as this
can cause serious damage to the mechanism.
Safety Switch
Regular cleaning will ensure that your sharpener operates efficiently.
l This sharpener is fitted with a safety switch ensuring that it cannot
be operated unless the shavings tray is fully in place.
l Use a small brush (e.g. paintbrush or toothbrush) to clean the
cutting blade. Never use metal objects as this may damage the
cutting blade.
l The shavings tray can be removed and cleaned with water only.
Never clean the main sharpener unit with water or use solvents such
as alcohol or thinner.
Coloured Pencils
l Sharpening coloured pencils causes wax to build up on the
sharpener blade.
l We recommend alternating between coloured and graphite pencils
as graphite will help to clean the blade.
l If excessive build up occurs then clean the blade as per the
instructions above.
Thermal cut-out system
l This sharpener is suitable for intermittent use and should not be
used continuously for more than 10 minutes.
Long continual use will cause the thermal cut-out system to
activate. This is a safety feature and the sharpener will require
a cool down period of approx. 20 minutes before it is ready for use.
Replacement Blades
l As with all sharpeners, frequent use will eventually blunt the
sharpener blade. For replacement blades, please contact your
supplier quoting product code 40234.
l To download instructions on how to change the blade, visit
For troubleshooting and product support, please visit www.swordfishsupport.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF