Philips 40HFL5010T/12 40" Full HD Smart TV Wi-Fi Black LED TV User manual

series

User Manual

28HFL5010T

32HFL5010T

40HFL5010T

48HFL5010T

55HFL5010T

Contents

1 Setting up 3

1.1 Read safety 3

1.2 TV stand and wall mounting 3

1.3 Tips on placement 3

1.4 Power cable 3

1.5 Antenna cable 4

2 Connections 5

2.1 Tips on connections 5

2.2 EasyLink HDMI CEC 6

2.3 Common interface - CAM 7

2.4 Set-top box - STB 8

2.5 Home Theatre System - HTS 8

2.6 Blu-ray Disc player 10

2.7 DVD player 10

2.8 Game console 10

2.9 USB flash drive 11

2.10 Photo camera 11

2.11 Camcorder 11

2.12 Computer 12

2.13 Headphones 12

3 Remote control 14

3.1 Key overview 14

3.2 IR sensor 15

3.3 Batteries 15

3.4 Cleaning 15

4 Switch on 16

4.1 On or Standby 16

4.2 Keys on TV* 16

4.3 Word mark brightness* 16

5 Professional mode 17

5.1 What you can do 17

5.2 Enter Professional Home Menu 17

5.3 Enable Professional Home Menu 17

5.4 Professional settings menu 17

5.5 MyChoice setup 20

5.6 Combine channel list 21

5.7 Smart TV Settings 21

6 TV channels 22

6.1 Watching TV channels 22

6.2 Channel installation 27

7 Home menu 32

8 Settings 33

8.1 Setup menu 33

8.2 Picture 33

8.3 Sound 37

8.4 Universal access 39

9 TV guide 41

9.1 What you need 41

9.2 Using the TV guide 41

10 Sources 42

10.1 Sources list 42

10.2 From standby 42

10.3 EasyLink 42

11 Timers and clock 43

11.1 Sleeptimer 43

11.2 Clock 43

2

11.3 Switch off timer 43

11.4 Alarm 43

12 Network 44

12.1 Network 44

12.2 Wireless network 44

12.3 Wired network 45

12.4 Network settings 45

13 Your photos, videos and music 47

13.1 From a USB connection or computer 47

13.2 Wi-Fi Miracast 48

14 Skype 50

14.1 About Skype 50


14.3 Start with Skype 50

14.4 Skype menu 51

14.5 My profile 51

14.6 People 52

14.7 Calling on Skype 53

14.8 Skype credit 54

14.9 Skype settings 55

14.10 Sign out 56

14.11 Quit Skype 56

14.12 Terms of use & Privacy Policy 56

15 Smart TV 57

15.1 About Smart TV 57


15.3 Smart TV Apps 57

15.4 Reset Smart TV 58

16 Specifications 59

16.1 Environmental 59

16.2 Reception 59

16.3 Display 60

16.4 Power 60

16.5 Dimensions and weights 60

16.6 Wall mounting 61

16.7 Connectivity 61

16.8 Multimedia 61

17 Software 62

17.1 Software update 62

17.2 Software version 62

17.3 Open source software 62

17.4 Open source license 63

18 Troubleshooting and support 69

18.1 Troubleshooting 69

18.2 Register 70

18.3 Online help 70

18.4 Consumer Care / Repair 70

19 Safety and care 72

19.1 Safety 72

19.2 Screen care 73

20 Terms of use, copyrights and licenses

74

20.1 Terms of use 74

20.2 Copyrights and licenses 74

Index 77

1

Setting up

1.1

Read safety

Read the safety instructions that are supplied with the

TV first before you use the TV.

1.2

TV stand and wall mounting

TV stand

You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV.

In case you lost this guide, you can download it from www.philips.com

.

Use the product type number of the TV to look for the

Quick Start Guide to download.

Wall mounting

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount . . .

To fix the bracket securely, use screws with a length indicated in the drawing.

TV wall mounting should meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV.

TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

Note

Before mounting the TV on the wall, remove the existing VESA screws on the back panel.

Warning

Follow all instructions provided with the TV mount. TP

Vision Europe B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.

To prevent damage to cables and connectors, leave a gap of at least 5.5 cm / 2.2 inches from the back of the TV.

Before you mount the TV on the wall, find the correct length of the screw. To find the length of the screw, add the thickness of your wall mount to the screw length.

1.3

Tips on placement

• Position the TV where light does not shine directly on the screen.

• Dim lighting conditions in the room for best

Ambilight effect.*

• Position the TV up to 15 cm away from the wall.

• The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.

• 28HFL5010T - VESA MIS-F 100x100, M4 (Minimum

7.5 mm, Maximum 8.5 mm)

• 32HFL5010T- VESA MIS-F 100x100, M4 (Minimum

8 mm, Maximum 14 mm)

• 40HFL5010T - VESA MIS-F 200x200, M4 (Minimum

12 mm, Maximum 16 mm)

• 48HFL5010T - VESA MIS-F 200x200, M6

(Minimum 12 mm, Maximum 16 mm)

• 55HFL5010T - VESA MIS-F 400x200, M6

(Minimum 12 mm, Maximum 16 mm)

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The

3

* Ambilight function is only for TVs with Ambilight.

1.4

Power cable

• Insert the power cable into the POWER connector on the back of the TV.

• Make sure the power cable is securely inserted in the connector.

• Make sure that the power plug, in the wall socket, is accessible at all times.

• When you unplug the power cable, always pull the plug, never pull the cable.

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

1.5

Antenna cable

Insert the antenna plug firmly into the ANTENNA socket at the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an

IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

4

2

Connections

2.1

Tips on connections

Antenna

If you have a Set-top box (a digital receiver) or

Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or

Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.

Copy protection

DVI and HDMI cables support HDCP (High-bandwidth

Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital

Rights Management).

HDMI ARC

All of the HDMI connections on the TV have HDMI

ARC (Audio Return Channel).

If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI

ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.

You can use any HDMI connection on this TV to connect the HTS but ARC is only available for 1 device/connection at a time.

In case you prefer to switch off ARC on the HDMI connections, enter the Professional Home Menu.

Select TV settings > Sound > Advanced > HDMI ARC.

HDMI

HDMI CEC

An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) or

Ultra HD (UHD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.

Y Pb Pr - Audio L R

Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for

High Definition (HD) TV signals. Next to the Y, Pb and

Pr signals add the Audio Left and Right signals for sound.

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

EasyLink HDMI CEC

If your devices are connected with HDMI and have

EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.

DVI to HDMI

Use a DVI to HDMI adapter if your device only has a

DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to

AUDIO IN for sound, on the back of the TV.

• Only for TVs with component connectors.

5

CVBS - Audio L R

CVBS - Composite Video is a high quality connection. The CVBS connection can be used for

High Definition (HD) TV signals. Next to the CVBS signal adds the Audio Left and Right signals for sound.



• Only for TVs with component/composite connectors.

Scart

SCART is a good quality connection. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals.

Use the SCART adapter cable to connect your device.

You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System.

If the sound does not match the video on screen, you can adjust the audio to video synchronisation.

2.2

EasyLink HDMI CEC

EasyLink

With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC

(Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI

CEC and must be connected with an HDMI connection.

EasyLink setup

The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos

Link, Bravia Theatre Sync, Kuro Link, Simplink and

Viera Link. Not all brands are fully compatible with

EasyLink.

Example HDMI CEC branding names are property of their respective owners.

Audio Out - Optical

Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1

audio channels. If your device, typically a Home

Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In -

Optical connection on the HTS. The Audio Out -

Optical connection sends the sound from the TV to the HTS.

6

Operate devices

To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press SOURCE, select a device connected to an HDMI connection and press

OK.

Once the device is selected, the TV remote control can control the device. However  and OPTIONS keys and some other TV keys are not forwarded to the device.

If the key you need is not on the TV remote control, you can select the key in the Options menu.

Press OPTIONS and select Controls in the menu bar.

On the screen, select the device key you need and press OK.

Some very specific device keys might not be available in the Controls menu.

Note: Only devices that support EasyLink remote control function will respond to the TV remote control.

EasyLink settings

The TV comes with all EasyLink settings switched on.

You can switch off any EasyLink setting independently.

EasyLink

To switch off EasyLink completely . . .

1 - Professional Mode: Off  Press  and select Setup and press OK.

Professional Mode: On  Enter the Professional

Home Menu.

2 - Select TV settings > General settings > EasyLink, and press OK.

3 - Select Off and press OK.

4 - Press , repeatedly if necessary, to close the menu.

EasyLink Remote Control

If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately.

In the EasyLink settings menu, select EasyLink remote control and select Off.

Pixel Plus Link

Some devices, a DVD or Blu-ray Disc player, might have their own picture quality processing. To avoid

7 bad picture quality caused by interference with the

TV processing, the picture processing of these devices should be disabled. The TV comes with Pixel Plus Link switched on and disables the picture quality processing of recent Philips devices connected to the

TV.

To switch off Pixel Plus Link, in the EasyLink settings menu, select Pixel Plus Link and select Off.

Auto subtitle shift

If you play a DVD or Blu-ray Disc on a Philips disc player that supports subtitles, the TV can move the subtitles upwards. Subtitles will be visible whatever

Picture format you select. The TV comes with Auto subtitle shift switched on.

To switch off Auto subtitle shift, in the EasyLink settings menu, select Auto subtitle shift and select

Off.

Auto switch off devices

You can set the TV to switch off the connecting HDMI-

CEC compliant devices if they are not the active source. The TV switches the connected device to standby after 10 minutes of inactivity.

2.3

Common interface - CAM

CI+

This TV is ready for the CI+ Conditional Access.

With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV broadcasters in your region. These programmes are scrambled by the TV broadcaster and descrambled with a prepaid CI+ module.

Digital TV broadcasters provide this CI+ module

(Conditional Access Module - CAM) when you subscribe to their premium programmes. These programmes have a high level of copy protection.

Contact a digital TV broadcaster for more information on terms & conditions.

CAM

Insert a CAM module

Switch off the TV before inserting a CAM.

Look on the CAM for the correct method of insertion.

Incorrect insertion can damage the CAM and TV.

Use the Common Interface slot on the TV to insert the

CAM card.

With the front of the card facing towards you, gently insert the CAM as far as it will go.

Leave the card in the slot permanently.

It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV.

If a CAM is inserted and subscription fees are paid,

(connection methods can differ), you can watch the

TV broadcast. The inserted CAM is exclusively for your TV.

CAM settings

To set passwords or PIN codes for the CAM TV broadcast, press  and select Setup and press OK.

Select Channel settings > Common Interface.

Select the CAM TV broadcaster and press OK.

2.4

Set-top box - STB

Use 2 antenna cables to connect the antenna to the

Set-top box (a digital receiver) and the TV.

Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.

To switch off the Switch off timer:

Professional Mode: Off  Press  and select Setup and press OK.


Home Menu.

Select TV settings > General settings > Switch off timer and set the slider bar to Off.

2.5

Home Theatre System - HTS

Connect HTS

Use 2 antenna cables to connect the antenna to the

Set-top box (a digital receiver) and the TV.

Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV.

Alternatively, you can use a SCART cable if the Settop box has no HDMI connection.

Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV.

Alternatively, you can use a SCART cable if the Settop box has no HDMI connection.

Switch off timer

8

Switch off timer

Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.

To switch off the Switch off timer:



Home Menu.

Select TV settings > General settings > Switch off timer and set the slider bar to Off.

press OK.


Audio Out settings

Audio Out delay

With a Home Theatre System (HTS) connected to the

TV, the picture on TV and the sound from the HTS should be synchronised.

Automatic audio to video sync

With recent Philips Home Theatre Systems, the audio to video sync is done automatically synchronised and always correct.

Audio sync delay

For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the

HTS, you need to switch off Audio out delay on the

TV.

To switch off the Audio Out delay . . .



Home Menu.

2 - Select TV settings > Sound > Advanced > Audio out delay.



Audio Out offset

If you cannot set a delay on the Home Theatre

System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. The Audio

Out delay setting should be switched on.

To synchronise the sound on the TV . . .



Home Menu.

2 - Select TV settings > Sound > Advanced > Audio out offset.

3 - Use the slider bar to set the sound offset and

Audio Out format

If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like

Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home

Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.

To set the Audio out format . . .



Home Menu.

2 - Select TV settings > Sound > Advanced > Audio out format.

3 - Select Multichannel or Stereo.


Audio Out levelling

Use the Audio Out levelling setting to level the volume (loudness) of the TV and the Home Theatre

System when you switch over from one to another.

Volume differences can be caused by differences in sound processing.

To level the difference in volume . . .



Home Menu.

2 - Select TV settings > Sound > Advanced > Audio out levelling.

3 - If the volume difference is large, select More. If the volume difference is small, select Less.


Audio Out levelling affects both the Audio Out -

Optical and HDMI ARC sound signals.

9

Problems with HTS sound

Sound with loud noise

If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home

Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the

Home Theatre System has no DTS sound processing.

You can fix this by setting the Audio out format of the

TV to Stereo.



Home Menu.

2 - Select Setup > TV settings > Sound > Advanced > Audio out format.

No sound

If you cannot hear the sound from the TV on your

Home Theatre System, check the following . . .

• Check if you connected the HDMI cable to an HDMI

ARC connection on the Home Theatre System. All

HDMI connections on the TV are HDMI ARC connections.

• Check if the HDMI ARC setting on the TV is switched

On.

• Professional Mode: Off  Press  and select Setup and press OK.

Professional Mode: On  Enter the

Professional Home Menu.

• Select Setup > TV settings > Sound > Advanced > HDMI

ARC.

2.6

Blu-ray Disc player

Use a High speed HDMI cable to connect the Blu-ray

Disc player to the TV.

2.7

DVD player

Use an HDMI cable to connect the DVD player to the

TV.

Alternatively, you can use a SCART cable, if the device has no HDMI connection.

If the DVD player is connected with HDMI and has

EasyLink CEC, you can operate the player with the TV remote control.

2.8

Game console

HDMI

For best quality, connect the game console with an

High speed HDMI cable to the TV

Y Pb Pr - Audio L R

Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.

If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.

10



CVBS - Audio L R / Scart

Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV.

If your game console only has Video (CVBS) and

Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.

Note: the CVBS to SCART Adapter is not provided in the TV set.

The TV detects the flash drive and opens a list showing its content.

If the contents list does not appear automatically, press SOURCE, select USB and press OK.

To stop watching the USB flash drive content, press

TV or select another activity.

To disconnect the USB flash drive, you can pull out the flash drive anytime.

2.10

Photo camera

To view photos stored on your digital photo camera, you can connect the camera directly to the TV.

Use one of the USB connections on the TV to connect. Switch on the camera after you made the connection.

CVBS - Audio L R

Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV.



2.9

USB flash drive

You can view photos or play your music and videos from a connected USB flash drive.

Insert a USB flash drive in one of the USB

connections on the TV while the TV is switched on.

If the contents list does not appear automatically, press SOURCE, select USB and press OK.

Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.

Ultra HD on USB

You can view photos in Ultra HD resolution from a connected USB device or flash drive. The TV will downscale the resolution to Ultra HD if the resolution of the photo is higher. You cannot play a native Ultra

HD video on any of the USB connections.

11

2.11

Camcorder

HDMI

For best quality, use an HDMI cable to connect the camcorder to the TV.



2.12

Computer

Connect

You can connect your computer to the TV and use the TV as a PC monitor.

With HDMI

Use an HDMI cable to connect the computer to the

TV.

CVBS - Audio L R / Scart

You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has

Video (CVBS) and Audio L/R output, use a Video

Audio L/R to SCART adapter to connect to the SCART connection.

Note: the CVBS to Scart Adaptor is not provided in the TV set.

With DVI to HDMI

Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (minijack 3.5mm) to AUDIO IN L/R on the back of the TV.

CVBS - Audio L R

Use a Video Audio L/R cable to connect the camcorder to the TV.

12

2.13

Headphones

You can connect a set of headphones to the  connection on the TV. The connection is a mini-jack

3.5mm. You can adjust the volume of the headphones separately.

To adjust the volume . . .



Home Menu.

2 - Select TV settings > Sound > Headphones

volume and press OK.

3 - Press  (up) or  (down) to adjust the volume.

4 - Press , repeatedly if necessay, to close the menu.

13

3

Remote control

3.1

Key overview

Top

1 -  Standby / On

To switch the TV On or back to Standby.

2 - MYCHOICE

To switch on mychoice

3 - CHANNEL GRID

To open or close the channel grid.

4 - SOURCE

To open or close the Sources menu - the list of connected devices.

5 - CLOCK

To display the clock.

6 - SMART TV

To open the Smart TV start page.

(Only for Smart TV's)

7 - ALARM

To set the alarm.

8 - SMART INFO

To open the smart information page.

9 - FORMAT

To open or close the Picture format menu.

10 - TV

To switch back to watching TV.

Middle

1 - HOME

To open or close the home menu.

2 - GUIDE

To open or close the TV guide.

3 - ADJUST

To open the Adjust menu.

4 -  BACK

To switch back to the previous channel you selected.

To close a menu without changing a setting.

To go back to the previous Smart TV page.

5 - Play/Pause

• Play , to playback.

• Pause , to pause playback.

6 - INFO

To open or close programme info.

7 - OK key

To confirm a selection or setting.

8 - Arrow / navigation keys

To navigate up, down, left or right.

9 - OPTIONS

To open or close the Options menu.

Bottom

14

1 - Channel

To switch to the next or previous channel in the channel list.

To open the next or previous page in Text or start the next or previous chapter on a disc.

2 - Colour keys

Follow on screen instructions. Blue key  , opens

Help.

3 - Number keys and text keypad

To select a TV channel directly or to enter text.

4 - SUBTITLE

To switch subtitles on, off or Automatic.

5 -  Volume

To adjust the volume level.

6 -  Mute

To mute the sound or to restore it.

7 - TEXT

To open or close Text / Teletext.

3.2

IR sensor

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

3.3

Batteries

1 - Slide the battery door in the direction shown by the arrow.

2 - Replace the old batteries with 2 type AAA-LR03-1.5V alkaline batteries. Make sure the + and the - ends of the batteries line up correctly.

3 - Reposition the battery door and slide it back until it clicks.

Remove the batteries if you are not using the remote control for a long time.

Safely dispose of your old batteries according to the end of use directions.

3.4

Cleaning

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth.

Never use substances such as alcohol, chemicals or household cleaners on the remote control.

15

4

Switch on

4.1

On or Standby

Make sure you plugged in the mains power on the back of the TV before you switch on the TV.

If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up.

With the TV in standby, press  on the remote control to switch the TV on.

4.3

Word mark brightness*

You can switch off or adjust the word mark lighting.

To adjust or switch off…



Home Menu.

2 - Select TV settings > General settings > Word mark brightness and press OK.

3 - Select Maximum, Medium, Minimum or select Off to switch off the lighting of the word mark.


*Only available for certain TV models

Switch to standby

To switch the TV to standby, press  on the remote control.

Switch Off

To switch the TV Off, press the Joystick on the right or on the back. The red indicator light is off. The TV is still connected to the mains power but consumes a minimum of energy.

To switch off the TV completely, disconnect the power plug.

When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

4.2

Keys on TV*

While the on-screen display is on, press the Joystick to display the menu.

• Use the arrow/navigation keys to navigate up, down, left or right.

• Press the Joystick to confirm a selection or setting.

16

5

Professional mode

5.1

What you can do

In professional mode, you can configure the TV for hotel use. Features include:

• Changing professional setup items, such as power and speaker settings.

• USB cloning

• Downloading software via RF, including SSB firmware, Smart TV and hotel information.

• Change TV settings, Install channels, Change

Network settings.

5.2

Enter Professional Home

Menu

To enter the Professional Home Menu

1 - Press 3, 1, 9, 7, 5, 3 and .

The professional setup menu appears.

The Professional Home Menu has items for:

• Quick picture & sound settings and TV settings

• Search for channels and Channel settings

• Connect to network and Network settings (if applicable)

• Update software and Software settings

• Professional settings menu

5.3

Enable Professional Home

Menu

Enable professional mode

The Professional Mode will be already set to On if it was selected during the Virgin installation procedure.

To change the setting:

1 - In the professional mode menu, select Professional Settings menu and press OK.

2 - Select Professional settings > Professional mode > On, and press OK:

- On: Switch on professional mode. Hospitality features are enabled.

- Off: Switch off professional mode. The TV operates as a normal consumer TV.

5.4

Professional settings menu

Professional settings

Dashboard

This provides the selection of Default or Custom dashboard (i.e. Home Menu)

Professional Settings Overview

To view the Professional settings.

Room ID

Set a room ID for the TV. Restricted to numeric characters only, with a maximum of four characters.

Channel setup

Here you can enter the channel setup menu to rename, reorder, mark as favourites, hide/unhide channels

Reset Professional Settings

To reset Professional mode settings to factory default values.

Switch on settings

Customise the way the TV behaves when it is switched on.

Switch on channel

Switches to a predefined channel.

Switch on vol

Switches to a predefined volume.

Max volume

Limits the maximum volume of the TV.

Switch On Feature

Starts up in Smart TV orMyChoice modes.

Switch on picture format

Switches to a predefined picture format.

Power Settings

Customise the way the TV behaves when it is switched on.

Power On

Determine whether the TV goes to standby when it is switched on.

Low Power Standby

17

Determine whether standby mode is [Fast] (regular) or [Green] (low energy).

Smart power

Enable or disable energy saving mode.

Wake on LAN

Switch on the TV via internet if the TV is in standby.

Welcome message

Create and display a welcome message for your guests.

Display message

Switch the welcome message [On] or [Off].

Line 1

Enter the first line of welcome text.

Line 2

Enter the second line of welcome text.

Clear

Clear the welcome message.

Message Time-out

Set how long to display the welcome message.

Welcome logo

Display logo

Enable or disable the welcome logo that appears when the TV starts.

USB to TV

Load the welcome message from USB to TV.

SmartInfo Settings

SmartInfo

This sets the way the SmartInfo is shown.

USB to TV

Load the information for SmartInfo from USB to TV.

18

Control settings

Local KB lock

Select On to lock all TV buttons except . Select [Off] or [All] to unlock or lock all buttons respectively.

RC lock

Select On to disable all buttons on the remote control. Note that you can still enter the professional setup menu by pressing 3, 1, 9, 7, 5, 3, .

OSD display

Enable or disable on-screen information.

High security

Select On to restrict access to the professional setup menu.

Auto scart

Enable or disable the auto SCART feature – this feature allows a connected SCART device to turn the

TV on or off.

USB break-in

Enable or disable access to various USB features.

Enable USB

Enable or disable access to a connected USB storage device.

SXP BaudRate

Select a baud rate value (38400 or 19200).

Enable teletext

Enable or disable access to Teletext.

Enable MHEG

Enable or disable access to MHEG channels.

Applicable to UK only.

Enable EPG

Enable or disable access to the Electronic Programme

Guide.

Enable subtitle

Enable or disable subtitles.

Enable subtitle

Enable or disable subtitles.

Subtitle On Startup

Enable or disable subtitles when the TV starts.

Blue mute

Turn the TV screen to blue and mute the sound if there is no signal detected.

Enable CI slot

Enable or disable the CI slot.

Wi-Fi Direct Cross Connection

Enable or disable Wi-Fi Direct Cross Connection.

Wi-Fi Miracast

Enable or disable the Miracast.

DirectShare

Enable or disable the DirectShare feature.

Scrambled Program OSD

When disabled, scrambled programmes will not be visible to guests.

Wi-Fi Lost OSD

When disabled, no message will be shown when the

WiFi connection of the TV is lost.

Joint Space

Enable or disable the Joint Space feature.

Easylink Break-in/ Easylink control

Enable or disable access to various EasyLink features.

Enable Skype

Enable or disable Skype feature.

Digit Time Out

Sets the time out for the Digit OSD.

Selectable AV

The different AV connections can be selected to show up in the Source list.

Watch TV

To select which source to select when using the

Watch TV icon / button.

Time Download

To select from which source the time will be retrieved.

Manual, RF channel or IP channel.

Time Setting

Manually enter the time. This is only enabled when

Time download is set to Manual.

Time Download Program

Define which channel to extract the time from. Only visible when Time Download is set to RF.

NTP Server URL

Define which URL to extract the time from. Only visible when Time Download is set to IP.

Country Selection

Set the country in which the TV is being installed.

Time Zone

Set the time zone in which the TV is being installed.

Daylight Saving

Enable or disable daylight saving.

Time offset

Add to or subtract from the extracted time value.

Reference Date

Define whether the date is referenced from the TV.

Reference Time

Define whether the time is referenced from the TV.

Clock setup

External Clock

Enable or disable the external clock.

Clock brightness at Dim Light

This sets the level of brightness of the LCD clock when the environmental light conditions are dim

Clock brightness at Intense Light

This sets the level of brightness of the LCD clock when the environmental light conditions are bright

Clock Light Sensor Sensitivity

This sets the sensitivity level of the light sensor to sense environmental light conditions

Speaker settings

Set the audio output of the TV. If independent external speakers are attached, they will match the audio of the TV speakers.

TV speaker enable

Enable or disable TV speakers.

Independent main speaker mute

Enable or disable external speakers.

Default main speaker volume

Define the default volume to be applied when speakers are unmuted.

19

Installation

Blank Channel

Provides a list of the installed channels that can be selected to blank.

Free/scrambled

Select to install only Free To Air channels or also

Scrambled channels.

Multi remote control

Pair up to four RCs to a TV. Each RC is associated with one of four colour keys.

MyChoice

Enable or disable access to premium channels

(MyChoice).

SystemUI Settings

Source

Smart UI allows hotels to display a HTML portal when users select Browse Portal from the Home menu.

Select Off] to disable this feature and hide Browse

Portal from the Home menu. Selecting Server links to a URL and Local displays locally-stored HTML pages. The HTML files and supporting content

(images, video etc.) stored in the TV should not exceed a total of 4 MB.

Fallback

If SmartUI is on, enabling the backup automatically launches locally-stored HTML content if the link to an external server or URL does not work.

Icon Label

Change the label of the Browse Portal icon.

Server URL

Enter the URL to access from Browse Portal.

Web Services

TVDiscovery Service

Enable auto discovery by selecting On. Disable it by selecting Off.

SI Service

If SI Services is enabled by selecting On, users view the server defined in Smart TV Settings when they select Browse Portal in the home menu. If SI Services is disabled, the locally-stored HTML files (defined in

[Smart TV Settings) will launch when Browse

Portal is selected.

IP Upgrade Service

Enable or disable IP upgrade.

Vsecure

Vsecure prevents unauthorised viewing and copying of video – use this setting to change modes, load and erase keys.

Vsecure over RF enable

To enable Vsecure feature for RF channels.

Load Key to USB

To load the Vsecure key to USB flash drive.

Load Key to TV

To load the Vsecure key from USB flash drive to TV.

Vsecure Self Test

To initiate self test for Vsecure.

Erase Key Option

To select which Key to be erased.

Erase Key

To effectively erase the selected Key.

Clone/Upgrade

Easily copy TV settings to a USB storage device, then clone the settings onto another Philips TV.

RF Clone Program Info

To set the frequency, the medium and the symbol rate of the channel for cloning via RF.

Clone to TV

Initiate cloning from USB flash drive to the TV.

Select Clone to TV

To select which clone file on the USB to clone to the

TV.

Clone to USB

To initiate download of clone items from TV to USB flash drive.

Upgrade Mode

This sets the firmware upgrade mode to RF or IP.

Start Upgrade

To manually trigger instant firmware upgrade.

Auto Upgrade

Enable or disable automatic firmware upgrade.

20

5.5

MyChoice setup

Ask For PIN

To request for the pin code to enable MyChoice package.

Free Package

To select the list of channels to group in this package.

Package 1


Package 2


5.6

Combine channel list

This enables or disables a combined list of channels and AV sources.

5.7

Smart TV Settings

Smart TV can be disabled, or set to show default content or to show content via App Control.

App Control ID

To provide the ID number for App Control.

Profile Name

To provide the name of the profile to be used for this

TV.

Manage Profiles

This will bring you to the page for changing SmartTV settings

21

6

TV channels

6.1

Watching TV channels

Switch channels

To watch TV channels, press TV. The TV tunes to the

TV channel you last watched.

Alternatively, press  to open the Home menu and select Watch TV and press OK.

To switch channels, press CH  or CH . If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.

To switch back to the previously tuned channel, press

.

To switch to a channel from a channel list

While watching a TV channel, press CHANNEL

GRID to open the channel grid.

The channel grid can have several pages with channels. To view the next or previous page, press CH  or CH .

To close the channel lists without switching channels, press CHANNEL GRID again.

Radio channels

If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.

Channel list

Favourite channels

You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels.

Create your favourite channel list

1 - Professional Mode: Off  While watching a TV channel, press CHANNEL GRID to open the channel list.

Professional Mode: On  In the Professional Home

Menu , select Professional Settings menu and press

OK.

Select Professional settings > Channel setup and press OK.

2 - Select All to view all channels.

3 - Select the channel, and press  to mark as favourite.

4 - The selected channel is marked with a .

5 - To finish, press . The channels are added to the Favourites list.

To remove a channel from the favourites list, select the channel with , then press  again to unmark as favourite.

Reorder

You can reorder — reposition — channels in the

Favourite channel list.

1 - In the channel list Favourites, highlight the channel you want to reposition.

2 - Press  .

3 - Select the channel to reorder and press OK.

4 - Press the Navigation buttons to move the highlighted channel to another location and press OK.

5 - Once complete, press  to exit from the Favourite channel list.

You can highlight another channel and do the same.

Channel list views

In the channel lists, you can find all installed TV and radio channels.

Next to the channel list All, which holds all installed channels, you can set up a list of Favourites, view the installed Radio stations separately or discover the newly added channels in New.

Channel logos

In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off.

To switch off Channel logos . . .

1 - Professional Mode: Off  Press  and

22

select Setup and press OK.


Home Menu.

2 - Select TV settings > General settings > Channel logos and press OK.



Rename channels

You can rename channels in the channel list.

1 - Select the channel you want to rename in one of the channel lists.

2 - Select the channel to rename.

3 - Press  .

You can enter text with the remote control keyboard or open the on-screen keyboard.

With the on-screen keyboard

• To open the on-screen keyboard, place the cursor in the name text field and press OK.

• To delete the character in front of the cursor, press

 Backspace .

• To enter a character, select the character with the arrow keys and press OK.

• To select uppercase characters, press  .

• To select numbers or special characters, press  .

• When you are ready, press  to close the onscreen keyboard.

• To finish renaming, select Done and press OK.

Lock a channel

To prevent children from watching a channel or a programme, you can lock channels or lock age rated programmes.

Lock a channel

You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programmes from connected devices.

To lock a channel . . .

1 - Professional Mode: Off  While watching a TV channel, press CHANNEL GRID to open the channel list.

Professional Mode: On  In the Professional Home

Menu , select Professional Settings menu and press

OK.

Select Professional settings > Channel setup and press OK.

2 - In any list, select the channel you want to lock.

3 - Press OPTIONS and select Lock channel. In a

23 channel list, a locked channel is marked with a lock .

To unlock a channel, select the locked channel in the channel list. Press OPTIONS and select Unlock channel. You will need to enter the Child lock code.

Parental rating

To prevent children from watching a programme not suitable for their age, you can use an age rating.

Some digital broadcasters have age rated their programmes. When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme will be locked.

To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels.

To set an age rating . . .



Home Menu.

2 - Select Channel settings > Child lock > Parental rating and press OK.

3 - Enter a 4-digit Child lock code and confirm. Now you can set an age rating.

4 - Set the age and press OK.


To switch off the parental age rating, select None as age setting.

The TV will ask for the code to unlock the programme.

For some broadcasters / operators, the TV only locks programmes with a higher rating.

Set or change the lock code

To set the lock code or to change the current code . . .



Home Menu.

2 - Select Channel settings > Child lock > Change code and press OK.

3 - If a code is set already, enter the current Child lock code and then enter the new code twice.

The new code is set.

Forgotten your code?

If you have forgotten your code to unlock, call

Consumer Care in your country. Find the telephone number on the documentation that came with the TV or go to www.philips.com/support

Options for channels

While watching a channel, depending on the type of channel (analogue or digital) you are watching or depending on the TV settings you made, some options are available.

Open the options menu

While watching a channel, press OPTIONS.

Enable or disable the MHP applications.

Status

Select Status to view technical information on the channel (if it is analogue or digital) or a connected device you are watching.

Share

Enables the user to communicate his activity with his social networks (such as Twitter or email).

*For Smart TVs only.

Universal access

With Universal access switched on, you can set some options for hearing impaired and visually impaired people.

Video selection

Digital TV channels can offer multi video signals (multifeed broadcast), different camera viewpoints or angles of the same event or different programmes on one TV channel. The TV shows a message if any such

TV channels are available.

Subtitles

Switch Subtitles on or Subtitles off with this options.

Select Automatic to show subtitles only when the sound is muted with .

Subtitle language

For digital broadcast, you can select an available subtitle language temporarily if none of your preferred languages are available.

Audio languages

For digital broadcast, you can select an available audio language temporarily if none of your preferred languages are available.

Dual I-II

If an audio signal contains two audio languages but one language — or both — has no language indication, this option is available.

Common interface

If prepaid premium content is available from a CAM, you can set the provider settings with this option.

HbbTV on this channel

You can block the HbbTV pages from a channel that offers HbbTV.

MHP applications

Picture format

If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.

To change the picture format . . .

1 - While watching a TV channel, press FORMAT to open the Picture format menu.

2 - Select a format from the list and press OK.

The following format can be available according the picture on screen . . .

• Auto fill

• Auto zoom

• Super zoom

• Movie expand 16:9

• Wide screen

• Unscaled

• 4:3

Text / Teletext

Text pages

To open Text (Teletext) while you are watching TV channels, press TEXT.

To close Text, press TEXT again.

Select a Text page

To select a page . . .

1 - Enter the page number with the number keys.

2 - Use the arrow keys to navigate.

3 - Press a colour key to select a colour-coded subject at the bottom of the screen.

Text sub-pages

A Text page number can hold several subpages. The

24

subpage numbers are shown on a bar next to the main page number.

To select a subpage, press  or .

T.O.P. Text pages

Some broadcasters offer T.O.P. Text.

To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview.

Text options

In Text, press OPTIONS to select the following . . .

• Freeze page

To stop the automatic rotation of subpages.

• Dual screen / Full screen

To show the TV channel and Text alongside each other.

• T.O.P. overview

To open T.O.P. Text.

• Enlarge

To enlarge the Text page for comfortable reading.

• Reveal

To unhide hidden information on a page.

• Cycle subpages

To cycle subpages when these are available .

• Language

To switch the group of characters that Text uses to display correctly.

• Text 2.5

To activate the Text 2.5 for more colours and better graphics.

Text setup

Text language

Some digital TV broadcasters have several Text languages available.

To set your primary and secondary Text language . . .



Home Menu.

2 - Select Channel settings > Language.

3 - Select Primary Teletext or Secondary Teletext.

4 - Select your preferred Text languages.


Text 2.5

If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting.

To switch off Text 2.5 . . .

1 - Press TEXT.

2 - While watching the teletext, press OPTIONS.

3 - Select Text 2.5 > Off.


Menu language

To change the language or the TV menus and messages . . .



Home Menu.

2 - Select TV settings > General settings > Menu language and press OK.

3 - Select the language you want and press OK.


Audio languages

If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language.

1 - While you watch TV, press OPTIONS.

2 - For digital channels, select Audio language. For analogue channels, select Alternate audio.

Press OK to confirm your selection.

3 - Select from the available languages, then press OK.

Note:

If you have selected Alternate audio for analogue channels, select between:

• Main: Primary audio language or

• SAP: Secondary audio language

Subtitles and languages

Subtitles

Switch subtitles on

To open the Subtitle menu, press SUBTITLE.

You can set subtitles to On, Off or Automatic.

To show subtitles when the broadcasted programme is not in your language — the language you set for the

TV, select Automatic. Also, this setting will show subtitles when you mute the sound with .

For analogue channels, subtitles must be made available in Text.

25

Subtitles for digital channels

There is no need to set subtitles in Text for digital channels.

Digital channels can offer several subtitle languages for a programme. You can set a preferred primary and secondary subtitle language. If subtitles in one of these languages are available, the TV will show them.

If none of the preferred subtitle languages are available, you can select another subtitle language which is available.

.

To set the primary and secondary subtitle language . .



Home Menu.

2 - Select Channel settings and select Languages >

Primary subtitles language or Secondary subtitles language and press OK.

3 - Select a language and press OK.


To select a subtitle language when none of your preferred languages are available . . .

1 - Press OPTIONS.

2 - Select Subtitle language and select a language you want temporarily and press OK.

Subtitles for analogue channels

For analogue channels, you need to make the subtitles available for each channel manually.

1 - Switch to a channel and press TEXT to open Text.

2 - Enter the page number for subtitles, usually 888.

3 - Press TEXT again, to close Text.

If you select On in the Subtitle menu when watching this analogue channel, subtitles will be shown if available.

To know if a channel is analogue or digital, switch to the channel and open Status in the Options menu.

2 - Select Channel settings and select Languages >

Primary audio language or Secondary audio language and press OK.

3 - Select a language and press OK.


To select an audio language when none of your preferred audio language is available . . .

1 - Press OPTIONS.

2 - Select Audio language and select an audio language you want temporarily and press OK.

Audio languages for the hearing and visually impaired

Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired.

Menu language

To change the language or the TV menus and messages . . .



Home Menu.




Audio languages

Digital TV channels can broadcast audio with several spoken languages for a programme. You can set a preferred primary and secondary audio language. If audio in one of these languages is available, the TV will switch to this audio.

If none of the preferred audio languages is available, you can select another audio language which is available.

To set the primary and secondary audio language . . .



Home Menu.

Interactive TV

About iTV

With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages. On some pages, you can respond to a programme or vote, do online shopping or pay for a video-on-demand programme.

HbbTV, MHEG, . . .

Broadcasters use various interactive TV systems :

HbbTV (Hybrid Broadcast Broadband TV) or iTV

(Interactive TV - MHEG). Interactive TV is sometimes referred to as Digital Text or Red button. But each system is distinct.

Visit the broadcaster's Internet website for more

26

information.

What you need

Interactive TV is only available on digital TV channels.

To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the

TV.

HbbTV

If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages.



Home Menu.

2 - Select TV settings and select General settings >

HbbTV and press OK.

3 - Select On and press OK.


If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only.

1 - Tune to the channel of which you want to block the HbbTV pages.

2 - Press OPTIONS and select HBB TV on this channel and press OK.


Use iTV

Open iTV pages

Most channels that offer HbbTV or iTV invite you to press the  key or OK key to open their interactive programme.

Navigate iTV pages

You can use the arrow and colour keys, the number keys and the  key to navigate the iTV pages.

You can use the  (Play) and  (Pause) keys to watch videos within iTV pages.

Digital Text (UK only)

To open Digital Text, press TEXT. To close, press .

Close iTV pages

Most iTV pages inform you which key to use to close.

To force an iTV page to close, switch to the next TV channel and switch back.

About interactive TV

With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages.

Note:

• You cannot download files to your TV with this feature.

• Not all TV programmes, commercials and features include closed captioning information.

• You cannot respond to the digital content.

Visit the broadcaster's Internet website for more information.

6.2

Channel installation

Update channels

Automatic update

If you receive digital channels, you can set the TV to automatically update the list with new channels.

Alternatively, you can start a channel update yourself.

Automatic channel update

Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All channels list but also in the New channels list.

Empty channels are removed.

If new channels are found or if channels are updated or removed, a message is shown at TV start up. The

TV must be in standby to automatically update channels.

To switch off the message at start up . . .



Home Menu.

2 - Select Channel settings and press OK.

3 - Select Channel installation > Channel update message > Off.

To switch off the Automatic channel update . . .



Home Menu.


3 - Select Channel installation > Automatic channel update > Off and press OK.

Start an update

27

To start an update yourself . . .



Home Menu.

2 - Select Search for channels and press OK.

3 - Select Update channels and follow the instructions on screen. The update may take a few minutes.

In certain countries, the Automatic channel update is done while watching TV or any moment when the TV is in standby.

Factory settings sets the TV back to the original TV settings for picture and sound. To switch back to the original Factory settings . . .



Home Menu.

2 - Select TV settings > General settings > Factory settings and press OK.

3 - Press OK to confirm.


New channels

New channels added with the automatic channel update are easy to find in the channel list New. The same new channels are also stored in the All or

Radio channel list.

New channels are kept in the channel list New as long as you don't mark them as a favourite or tune to them.

Reinstall channels

You can search for and reinstall channels and leave all other TV settings untouched. Alternatively, you can do a full new TV installation.

If a child lock code is set, you will need to enter this code before you can reinstall channels.

Reinstall channels

To reinstall the channels only . . .



Home Menu.

2 - Select Search for channels > Re-install channels and press OK.

3 - Select the country where you install the TV.

4 - Select Antenna (DVB-T) or Cable (DVB-C) . The channel search may take a few minutes. Follow the instructions on screen.

Full installation

To redo a full TV installation . . .



Home Menu.

2 - Select TV settings > General settings > Reinstall

TV and press OK. The installation may take a few minutes. Follow the instructions on screen.

Factory settings

Channel list copy

Introduction

Channel list copy is intended for dealers and expert users. In some countries, Channel list copy is only available for copying satellite channels.

With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB.

Conditions

• Both TVs are from the same year range.

• Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA

• Both TVs have compatible software versions.

Current version

You can check the current version of the TV software with Current software info in  > Setup > Software settings.

Copy channel list

To copy a channel list . . .

1 - Switch on the TV which has its channels installed.

Plug in a USB memory device.



Home Menu.

3 - Select TV settings > General settings > Channel list copy > Copy to USB and press OK. To copy the channel list from this TV, you might be asked to enter the Child lock code you entered during the installation.

4 - When copying is done, unplug the USB memory device.

Now you can upload the copied channel list onto

28

another Philips TV.

Upload channel list

Upload a copied channel list

Depending on whether your TV is already installed or not, you must use a different way to upload a channel list.

To a TV that is not yet installed

1 - Plug in the power plug to start the installation and select language and country. You can skip Search for channels. Finish the installation.

2 - Plug in the USB memory device that holds the channel list of the other TV.

3 - To start the channel list upload, press  and select Setup and press OK.

4 - Select TV settings > General settings > Channel list copy > Copy to TV and press OK. You might be asked to enter the Child lock code of this TV.

5 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB memory device.

To an already installed TV

1 - Verify the country setting of the TV. (To verify this setting, press  and select Setup and press OK.

Select Search for channels > Re-install channels and press OK. Press  and later Cancel to leave the

Search for channels.)

If the country is correct continue with step 2.

If the country is not correct, you need to start a reinstallation. To start the reinstallation, press  and select Setup and press OK. Select TV settings >

General settings > Reinstall TV > OK. Select the correct country and skip the Search for channels.

Finish the installation. When done, continue with step

2.

2 - Plug in the USB memory device that holds the channel list of the other TV.

3 - To start the channel list upload, press  and select Setup and press OK.

4 - Select TV settings > General settings > Channel list copy > Copy to TV and press OK. You might be asked to enter the Child lock code of this TV.

5 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB memory device.



Home Menu.


3 - Select Channel installation > Antenna connection

> Antenna (DVB-T) or Cable (DVB-C) and press OK.

4 - Select the DVB setting you want.


DVB-C channel installation

For ease of use, all DVB-C settings are set to automatic.

If your DVB-C provider gave you specific DVB-C values, the network ID or network frequency, enter these values when the TV asks for them during installation.

It might be necessary to adjust the scanning (full or quick scan) or enter a specific symbol rate in the

Settings menu while installing. To set a Symbol rate, first set the Symbol rate to Manual.

Channel number conflicts

In some countries, different TV channels

(broadcasters) might have the same channel number.

While installing, the TV shows the list with channel number conflicts. You need to select which TV channel you want to install on a channel number with multiple TV channels.

DVB-T + DVB-C

If you can use a DVB-T antenna input but also a DVB-

C input, you can set up your TV for both DVB-T and

DVB-C. Install one system followed by the other with the necessary settings.

Once each system is installed, you need to switch the antenna input signal on the Antenna connection on the back of the TV and set the TV in the appropriate system to view the installed channels on TV.

To select the DVB-T or DVB-C setting, see above.

DVB-T or DVB-C

DVB-T or DVB-C reception

If both DVB-T and DVB-C reception is available in your country and if this TV is ready to receive DVB-T and DVB-C for your country, you have selected one or the other during the channel installation.

If you want to change the DVB setting to start a new channel installation . . .

DVB settings

Access DVB settings



Home Menu.

2 - Select Search for channels and press OK.

3 - Select Re-install Channels.

4 - Select the country where you install this TV.

5 - Select Cable (DVB-C).

6 - Select Start to search channels, or select Settings for DVB-C settings .

7 - Press  , repeatedly if necessary, to close the menu.

29

Symbol rate mode

If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the

Symbol rate mode setting on Automatic.

If you received a specific symbol rate value, select

Manual. However, the value you received could be in the predefined list of symbol rates already. Select

Predefined symbol rates to check if your value is available automatically.

Predefined symbol rates

With the Symbol rate mode set to Automatic, the TV will use 1 of the predefined symbol rates as used by most cable providers in your country.

your country.

If this results in having no channels installed or if some channels are missing, you can select the extended Full scan method. This method will take more time to search for and install channels.

Frequency step size

The TV searches for channels in steps of 8MHz.

If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz. Using the 1MHz steps will take more time to search for and install channels.

Symbol rate

With the Symbol rate mode set to Manual, you can enter the symbol rate value you received from your cable provider. To enter the value, use the number keys.

Digital channels

If you know your cable provider is not offering digital channels, you can skip searching for digital channels.

Select Off.

Analogue channels

If you know your cable provider is not offering analogue channels, you can skip searching for analogue channels. Select Off.

Symbol rate 2

With the Symbol rate mode set to Manual, you can enter a second symbol rate value you received from your cable provider. To enter the value, use the number keys.

Free / Scrambled

If you have a subscription and a CAM - Conditional

Access Module for pay TV services, select Free + scrambled. If you did not subscribe to pay TV channels or services, you can select Free channels only.

Network frequency mode

If you intend to use the fast Quick scan method in

Frequency scan to search for channels, select

Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country.

If you received a specific network frequency value to search for channels, select Manual.

Network frequency

With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys.

Frequency scan

Select the method of searching for channels. You can select the faster Quick scan method and use the predefined settings used by most cable providers in

Reception quality

If you receive digital channels, you can check the quality and signal strength of a channel.

If you have your own antenna, you can reposition the antenna to try and improve the reception.

To check the reception quality of a digital channel . . .

1 - Tune to the channel.

2 - Press  and select Setup and press OK.

3 - Select Channel settings > Channel installation >

Digital : reception test and press OK.

The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna.

To check the signal quality of this frequency again, select Search and press OK.

To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number with 

and  and change the number with  and . To

30

check the frequency, select Search and press OK.

If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic, unless your cable provider gave you a specific symbol rate value. To enter the symbol rate value, use the number keys.

Manual installation

Analogue TV channels can be manually installed, channel by channel.

To install analogue channels manually . . .



Home Menu.

2 - Select Channel settings > Channel installation >

Analogue : Manual installation and press OK.

• System

To set up the TV system, select System and press OK.

Select your country or the part of the world where you are now.

• Search channel

To find a channel, select Search channel and press

OK. Select Search and press OK. You can also enter a frequency yourself. If the reception is poor, press

Search again. If you want to store the channel, select

Done and press OK.

• Fine tune

To fine tune a channel, select Fine tune and press OK.

You can fine tune the channel with  or .

If you want to store the channel found, select Done and press OK.

• Store current channel / Store as new channel

You can store the channel on the current channel number or as a new channel number.

Select Store current channel or Store as new channel.

You can redo these steps until you have found all available analogue TV channels.

31

7

Home menu

From the Home menu, you can start any activity you can do with the TV.

Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the

Internet, start Skype.

Open the Home menu

1 - To open the Home menu, press .

2 - Select an activity using the arrow keys and press OK to start the activity.

3 - To close the Home menu without changing the current activity, press .

• Guest Menu

Select Guest Menu to install channels or adjust all TV settings.

Guest Menu  Select Guest Menu to adjust TV settings .

• TV

Select TV and press OK to watch TV channels.

• Smart TV

Select Smart TV and press OK to open the Smart

TV start page.

• Source

Select Source and select a connected device in the list underneath the icon. Press OK to switch to the selected device.

• TV guide

Select TV guide and press OK to open a list of the current and scheduled TV programmes of your channels.

• Smart Info

Select Smart Info to show information provided by the Hotel.

• Skype

Select Skype to make video calls for free.

• MyChoice

Select MyChoice to be able to select premium services made available through MyChoice service.

• DirectShare

Select DirectShare to view Movies, pictures or play music from mobile device to the TV.

• Miracast

Select Miracast to mirror the content of your mobile device display on to the TV.

32

8

Settings

8.1

Setup menu

Quick picture settings

With Quick picture settings you can set your basic picture preferences in a few easy steps. The settings you made are stored under the Picture style -

Personal. You can return to your picture preference if some settings were changed. You can set a preferred picture setting for every TV activity or connected device individually.

To return to your preferred picture setting, while watching a TV channel, press OPTIONS, select Picture and sound in the menu bar, select Picture style and select Personal.

To set a Quick picture setting . . .

1 - Press , select an activity or a connected device

(or its connection) and press OK.



Home Menu.

3 - Select Quick picture settings and press OK. Go through the steps and finish. The activity or connection has your personal preferences.

Channel settings

In the Channel settings menu, you can set your language preferences or switch on the Universal access for people who are hearing and visually impaired. You can set an age rating to prevent children from watching a rated programme and set or change your Child lock code. You can switch on the

Automatic channel update, do a digital reception test or install analogue channels manually.

Languages

This bundles some language settings for digital channels.

Universal access

Bundles settings related to Universal access.

Channel installation

This bundles some settings for automatic and manual channel installation.

Child lock

Set a PIN code to lock or unlock channels and set an age for watching rated programs.

Connect to network

Select to make connection to your wired or wireless network.

TV settings

In the TV settings menu you can set all Picture and Sound settings. The item General settings in the menu holds a collection of settings like Menu language, Sleep timer, Switch off timer, Universal access and more.

Network settings

Here you can change settings related to your

Network.

Update software

This item is related to updating TV software.

Search for channels

With Search for channels, you can update your current channel list and possible newly found channels are added to the channel list. You can also do a reinstallation of all channels. A channel update or a channel reinstall may take some time.

Software settings

Here you can see the current software version.

8.2

Picture

33

Picture style

For easy picture adjustment, you can select a preset setting with Picture style.

1 - While watching a TV channel, press OPTIONS to open the Options menu.

2 - Select Picture and sound in the menu bar and select Picture style.

3 - Select a style and press OK.

The available Picture styles are . . .

• Personal - Your preferences made in Quick picture settings

• Vivid - Ideal for daylight viewing

• Natural - Natural picture settings

• Movie - Ideal for watching movies

• Standard - Factory standard settings

• Photo - Ideal for viewing photos

Adjust a Picture style

You can adjust a Picture style . . .

1 - Select the style and press OK.



Home Menu.

3 - Select TV settings, navigate to the individual setting and adjust it.


To return to the original Picture style values . . .



Home Menu.

2 - Select TV settings > Picture > Picture style and select the style you want to reset.

3 - Press  Reset . The style is reset.

Vivid

If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting meant for in-store promotion.

To set the TV for Home use . . .



Home Menu.



Home Menu.

3 - Select Home and press OK.


Picture settings

Colour

With Colour, you can adjust the colour saturation of the picture.

To adjust the colour . . .



Home Menu.

2 - Select TV settings > Picture > Colour.

3 - Press  (right) and adjust the value with  (up) or  (down).


Contrast

With Contrast, you can adjust the contrast of the picture.

To adjust the contrast . . .



Home Menu.

2 - Select TV settings > Picture > Contrast.



Sharpness

With Sharpness, you can adjust the level of sharpness in fine detail of the picture.

To adjust the sharpness . . .



Home Menu.

2 - Select TV settings > Picture > Sharpness.



Advanced picture settings

Colour settings

34

Colour enhancement

With Colour enhancement, you can enhance the colour intensity and the details in bright colours.

To adjust the level . . .



Home Menu.

2 - Select TV settings > Picture > Advanced > Colour

> Colour enhancement.

3 - Press  (right) and select Maximum, Medium, Minimum or Off.


Colour temperature

With Colour temperature, you can set the picture to a preset colour temperature or select Custom to set a temperature setting yourself with Custom colour temperature. Colour temperature and Custom colour temperature are settings intended for expert users.

To select a preset . . .



Home Menu.


> Colour temperature.

3 - Press  (right) and select Normal, Warm or

Cool. Select Custom if you want to set a colour temperature yourself.


Custom colour temperature

With Custom colour temperature, you can set a colour temperature yourself. To set a Custom colour temperature, first select Custom in the Colour temperature setting to make the Custom colour temperature menu available. Custom colour temperature is a setting intended for expert users.

To set a custom colour temperature . . .



Home Menu.


> Custom colour temperature.

3 - Press  (right).

4 - Select a setting with the arrow keys. (WP is white point and BL is black level.)

5 - Press OK to confirm a setting. You can also select one of the presets in this menu.

6 - Press menu.

, repeatedly if necessary, to close the

Contrast settings

Contrast modes

With Contrast modes, you can set the level at which power consumption can be reduced by dimming the intensity of the screen. Choose for the best power consumption or for the picture with the best intensity.




Home Menu.

2 - Select TV settings > Picture > Advanced >

Contrast > Contrast modes.

3 - Press  (right) and select Best picture, Best power, Standard or Off.


Dynamic contrast

With Dynamic contrast, you can set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture.




Home Menu.


Contrast > Dynamic contrast.



Brightness

With Brightness, you can set the level of brightness of the picture signal. Brightness is a setting intended for expert users. We recommend non-expert users to adjust the brightness of the picture with the Contrast setting.




Home Menu.


35

Contrast > Brightness.



Video contrast

With Video contrast, you can decrease the range of the video contrast. Video contrast is the setting intended for expert users.




Home Menu.


Contrast > Video contrast.

3 - Press  (right) and adjust the value with 

(up) or  (down).


Light sensor

The Light sensor adjusts the picture automatically to the lighting conditions of the room. You can switch

Light sensor on or off.

To switch on or off . . .



Home Menu.


Contrast > Light sensor.

3 - Press  (right) and select On or Off.


• Only for TVs with light sensor function.

Gamma

With Gamma, you can set a non-linear setting for picture luminance and contrast. Gamma is a setting intended for expert users.




Home Menu.


Contrast > Gamma.



Sharpness settings

Super resolution

With Super resolution, you switch on a superior sharpness in line edges and contours.




Home Menu.

2 - Select TV settings > Picture >

Advanced > Sharpness > Super resolution.



Noise reduction

With Noise reduction, you can filter out and reduce the level of image noise.

To adjust the noise reduction . . .



Home Menu.


Sharpness > Noise reduction.

3 - Press  (right) and select Maximum, Medium,

Minimum or Off.


MPEG artefact reduction

With MPEG artefact reduction, you can smoothen the digital transitions in the picture. MPEG artefacts are mostly visible as small blocks or jagged edges in images.

To reduce the MPEG artefacts . . .



Home Menu.


Sharpness > MPEG artefact reduction.



36

Game or computer

You can switch the TV to the ideal picture setting for gaming or for using the TV as a computer monitor.

There is a different setting for Game or Computer. If a device has a correct type set in the Source menu -

Game console or Computer - the TV switches automatically to the ideal setting when you switch to the device. If you switch the setting manually, do not forget to switch it off when you switch to watching TV or another connected device.

To switch the setting manually . . .

1 - Press  and select Setup and press OK.

2 - Select TV settings > Picture > Advanced

> Activity style.

3 - Select Game, Computer or TV. The setting TV returns to the picture settings for watching TV.


Location

If the TV is located in a shop, you can set the TV to display an in store promotion banner. The Picture style is set to Vivid automatically. The automatic

Switch off timer is switched off.

To set the TV to Shop location . . .



Home Menu.

2 - Select TV settings > General settings > Location and press OK.

3 - Select Shop and press OK.


8.3

Sound

Sound style

For easy sound adjustment, you can select a preset setting with Sound style.

1 - While watching a TV channel, press OPTIONS to open the Options menu.

2 - Select Picture and sound in the menu bar and select Sound style.

3 - Select a Sound style and press OK.

The different Sound styles are . . .

• Personal - Your personal choices made in

Personalise picture and sound

• Original - Factory standard

• News - Ideal for speech

• Movie - Ideal for watching movies

• Game - Ideal for gaming

• Music - Ideal for listening to music

Adjust a Sound style

You can adjust a Sound style . . .

1 - Select the style and press OK.



Home Menu.

3 - Select TV settings, navigate to the individual setting and adjust it.

Press  to close the menu to store your setting.

To return to the original Sound style values . . .



Home Menu.

2 - Select TV settings > Sound > Sound style and select the style you want to reset.

3 - Press  Reset . The style is reset.

Sound settings

Bass

With Bass, you can adjust the level of low tones in the sound.




Home Menu.

2 - Select TV settings > Sound > Bass.



Treble

With Treble, you can adjust the level of high tones in the sound.




Home Menu.

2 - Select TV settings > Sound > Treble.



37

Surround mode

With Surround mode, you can set the sound effect of the TV speakers.

To set the surround mode . . .



Home Menu.

2 - Select TV settings > Sound > Surround mode.

3 - Press  (right) and select Stereo or Incredible surround.


Headphones volume

With Headphones volume, you can set the volume of a connected headphones separately.

To adjust the volume . . .

1 - Press OPTIONS and select Picture and sound in the menu bar.

2 - Press  (down) and select Headphones volume and press OK.

3 - Press  (up) or  (down) to adjust the volume.


speakers.

• If you select On, the TV speakers are always on.

With an audio device connected with HDMI CEC, you can use one of the EasyLink settings.

• If you select EasyLink, the TV sends the TV sound to the audio device. The TV will switch off the TV speakers when the device is playing the sound.

• If you select EasyLink autostart, the TV will switch on the audio device, send the TV sound to the device and switch off the TV speakers.

With EasyLink or EasyLink autostart selected, you can still switch to TV speakers or device speakers in the Picture and sound menu.

To set the TV speakers . . .



Home Menu.

2 - Select TV settings > Sound > Advanced > TV speakers.

3 - Press  (right) and select Off, TV speakers,

EasyLink or EasyLink autostart.


To switch speakers directly . . .

1 - While watching TV, press OPTIONS and select

Picture and sound.

2 - Select Speakers and select TV or Amplifier (audio device).


Advanced sound settings

Auto volume levelling

With Auto volume leveling, you can set the TV to automatically level out sudden volume differences.

Typically at the beginning of adverts or when you are switching channels.




Home Menu.

2 - Select TV settings > Sound > Advanced > Auto volume leveling.



Clear sound

With Clear sound, you improve the sound for speech.

Ideal for news programmes. You can switch the speech improvement on or off.




Home Menu.

2 - Select TV settings > Sound > Advanced > Clear sound.



TV speakers

You can send the TV sound to a connected audio device - a Home Theatre System or audio system.

With TV speakers, you select where you want to hear the TV sound and how you want to control it.

• If you select Off, you permanently switch off the TV

38

HDMI ARC

If you do not need an Audio Return Channel (ARC) on any of the HDMI connections, you can switch the ARC signal off.

Audio Out format

With Audio Out format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System.

Audio Out levelling

With Audio Out leveling you can level the sound volume of the Home Theatre System with the volume of the TV when you switch over from one to another.



Home Menu.

2 - Select TV settings > General settings > Universal access and press OK.



With Universal access switched on in Setup, the

Universal access option is added in the Options menu.

Audio Out delay

If you set an Audio sync delay on your Home Theatre

System, to synchronise the sound with the picture, you must switch off Audio Out delay on the TV.

Audio Out offset

If you cannot set a delay on the Home Theatre

System, you can set a delay on the TV with Audio Out offset.

TV placement

As part of the first installation, this setting is set to either On a TV stand or Wall mounted.If you have changed the placement of the TV since then, adjust this setting accordingly for best sound reproduction.



Home Menu.

2 - Select TV settings > General settings > TV placement and press OK.

3 - Select On a TV stand or Wall mounted and press

OK.


8.4

Universal access

Switch on

With Universal access switched on, the TV is set for use for hearing and visually impaired people.

Switch on

If you did not switch on Universal access during the installation, you can still switch it on in Setup.

To switch on Universal access . . .

Hearing impaired

Switch on

Digital TV channels can broadcast special audio commentary describing what is happening on screen.

To be able to set the visually impaired audio and effects, you have to switch on Audio description first.

Also, before you can switch on Audio description, you have to switch on Universal access.

Audio description

With Audio description, a narrator's commentary is added to the normal audio.

To switch on the commentary (if available) . . .

1 - With Universal access switched on, press

OPTIONS and select the Options tab in the menu bar.

2 - Select Audio description and press OK.


You can check if an audio commentary is available.

In the Options menu, select Audio language and look for an audio language marked with a .

Speakers / Headphones

With Speakers / Headphones, you can select where you want to hear the audio commentary.

On the TV speakers only, on the headphones only or on both.

To set Speakers / Headphones . . .


2 - Select Channel settings > Languages > Audio description > Speakers / Headphones and press OK.

3 - Select Speakers, Headphones or Speakers + headphones and press OK.


39

Visually impaired

Mixed volume

You can mix the volume of the normal audio with the audio commentary.

To mix the volume . . .

1 - Press OPTIONS and select Universal access in the menu bar.

2 - Select Mixed volume and press OK.

3 - Use the arrows up and down to set the slider bar.

4 - Press OK to confirm.

Audio effect

Some audio commentary can hold extra audio effects, like stereo or fading sound.

To switch on Audio effects (if available) . . .


2 - Select Channel settings > Languages > Audio description > Audio effects and press OK.

3 - Select On or Off and press OK.


Speech

The audio commentary can also hold subtitles for the words which are spoken.

To switch on these subtitles (if available) . . .


2 - Select Channel settings > Languages > Audio description > Speech and press OK.

3 - Select Descriptive (audio) or Subtitles and press

OK.


Key beep

Key beep gives an audio feedback each time you press a key on the remote control. The volume of the beep is fixed.

To switch on Key beep . . .

1 - Press OPTIONS, select Universal access and press

OK.

2 - Select Key beep and select On.

If Universal access does not appear in the Options menu, switch on Universal access in Setup.

40

9

TV guide

9.1

What you need

With the TV guide you can view a list of the current and scheduled TV programmes of your channels.

Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown. Not all channels offer TV guide information.

The TV can collect TV guide information for the channels that are installed on the TV (e.g the channels you watch with Watch TV). The TV cannot collect the TV guide information for channels viewed from a digital receiver.

9.2

Using the TV guide

Open the TV guide

To open the TV guide, press  GUIDE.

Press  GUIDE again to close.

Change day

The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days).

If the TV guide information comes from the broadcaster, you can pres CH  to view the schedule of one of the next days. Press CH  to go back to the previous day.

Alternatively, you can press OPTIONS and select Change day.

Select Previous day, Today or Next day and press OK, to select the day of the schedule.

Set a reminder

You can set reminders that alert you of the start of a programme with a message on screen.

• To set a reminder, select the programme in the schedule and press  for Set reminder. The programme is marked with a clock.

• To cancel the reminder, press the  for Clear reminder.

• To view a list of all reminders you have set, press OPTIONS, and select All reminders.

Search by genre

If the information is available, you can look up scheduled programmes by genre like movies, sports, etc.

To search for programmes by genre, press OPTIONS and select Search by genre.

Select a genre and press OK. A list with the found programmes appears.

The first time you open the TV guide, the TV scans all

TV channels for programme information. This may take several minutes. TV guide data is stored in the

TV.

Tune to a programme

Switch to a programme

From the TV guide, you can switch to a current programme.

To select a programme, use the arrow keys to highlight the programme name.

Navigate to the right to view programmes scheduled later that day.

To switch to the programme (channel), select the programme and press OK.

View programme details

To call up the details of the selected programme, press INFO.

41

10

Sources

10.1

Sources list

In the list of connections - the Source menu - you can find the devices connected to the TV. From this

Source menu, you can switch to a device.

Sources menu

To open the Sources menu, press SOURCE.

To switch to a connected device, select the device with the arrows  (left) or  (right) and press OK.

For some devices (HDMI-CEC devices), you can select an activity directly in the list underneath the device icon.

Select the device and select an activity and press OK.

To close the Source menu without switching to a device, press SOURCE again.

10.3

EasyLink

With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.

10.2

From standby

With the TV in standby, you can switch on a connected device with your TV remote control.

Play

To switch on both disc player and TV from standby and start playing the disc or programme immediately, press  (play) on the TV remote control.

The device should be connected with an HDMI cable and both TV and device must have HDMI CEC switched on.

Home Theatre System

You can switch on your Home Theatre System to listen to an audio disc or a radio channel and leave the TV in standby.

To only switch on the HTS, with the TV in standby, press SOURCE on the TV remote control.

42

11

Timers and clock

11.1

Sleeptimer

With the sleep timer, you can set the TV to switch to standby automatically after a preset time.

To set the sleep timer . . .

1 - Press  and select Setup* and press OK.

*Professional Mode : Off  Setup

*Professional Mode: On  Guest Menu

2 - Select TV settings* > General settings* > Sleep timer.

*Professional Mode : Off  TV settings > General settings

*Professional Mode: On  Select Sleep timer.

With the slider bar you can set the time to up to 240 minutes in increments of 30 minutes. If set to Off, the sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown.


11.2

Clock

To know what time it is, press CLOCK on the remote control.

In some countries, digital broadcasts do not send UTC

- Coordinated Universal Time information. The daylight saving change might be ignored and the TV might show an incorrect time.

To correct the TV clock . . .



Home Menu.

2 - Select TV settings > General settings > Clock

> Auto clock mode, a nd select Country dependent.

3 - Select Daylight saving and select the appropriate setting.


To set the TV clock manually . . .



Home Menu.

2 - Select TV settings > General settings > Clock

> Auto clock mode, a nd select Manual.

3 - Select Day and Time to adjust.


11.3

Switch off timer

If you do not press a key on the remote control during a 4 hour period, or if the TV receives no input signal nor remote control commands for 10 minutes, the TV switches off automatically to save energy.

If you use the TV as a monitor or use a digital receiver to watch TV (a Set-top box - STB) and you do not use the remote control of the TV, you should deactivate the automatic switch off.

To deactivate the Switch off timer . . .



Home Menu.

2 - Select TV settings > General settings > Switch off timer and set the slider bar to Off.


11.4

Alarm

Only available if Professional Mode: On.

An alarm can be set on the TV. The TV can wakeup on a defined alarm time.

To set the alarm follow following steps:

1 - Press  and select Guest menu and press OK.

2 - Select Alarm. To set the alarm select On.

3 - Select Alarm time and press OK. The time can be changed by  or . Select On to program the alarm time that has been set.

4 - A Wakeup volume can be set. Adjust the slider bar to set the desired volume level.

5 - A Wakeup tune can be selected. There are 4 predefined tunes available to select.

6 - Alternatively a Wakeup channel can be selected from the list.

Alternatively, alarm time can be set by pressing the

ALARM button on the remote control.

43

12

Network

12.1

Network

12.2

Wireless network

What you need

To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet.

Network devices

The TV can connect to other devices in your wireless network, like your computer or smartphone. You can use a computer with Microsoft Windows or Apple OS

X.

File sharing

On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*,

Windows Media Player 11, Twonky™ or similar.

Install the media server software on your computer and set it up to share your media files with the TV.

Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV.

* You can download the Philips MediaManager software from the Philips support site www.philips.com/support

Make the connection

Follow steps 1 to 5.

Step 1 - Make sure that the router of your wireless network is switched on.

Step 2 -



Home Menu.

Step 3 - Select Connect to network and press OK.

Step 4 - Select Connect and press OK.

Step 5 - Select Wireless and press OK.

Step 6 - Select Scan to scan for your wireless network. If you have a router with WPS (Wi-Fi

Protected Setup), you can select WPS. Select your choice and press OK.

• Scan

Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity.

• WPS

If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes.

Then press Connect to make the connection.

If you have devices in your wireless network that use the WEP security encryption system, you cannot use

WPS.

If you must use the WPS PIN code to connect, select

Scan instead of WPS.

Step 7 - In the list of networks found, select your wireless network and press OK.

If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select Manual entry to enter the network name yourself.

Step 8 - Depending on the type of router, you can now enter your encryption key (WEP, WPA or WPA2).

If you entered the encryption key for this network before, you can select Next to make the connection immediately.

If your router supports WPS or WPS PIN, you select

WPS, WPS PIN or Standard. Select your choice and press OK.

• Standard

Select Standard to enter the encryption key

(password, passphrase or security key) manually.You

can use the keyboard on the RC to enter the encryption key. Once you have entered the key, press

Connect.

• WPS PIN

To make a secured WPS connection with a PIN code, select WPS PIN and press OK. Write down the 8-digit

PIN code shown and enter it in the router software on your PC. Return to the TV and press Connect. Consult the router manual on where to enter the PIN code in the router software.

Step 9 - A message will be shown when the connection is successful.

Network configuration

If the connection fails, you can check the DHCP

44

setting of the router. DHCP should be set to On.

Alternatively, if you are an advanced user and want to install your network with Static IP addressing, set the

TV to Static IP.

To set the TV to Static IP:



Home Menu.

Select Network settings > Network settings > Network configuration > Static IP. With

Static IP selected in the menu, you can set the IP address and other necessary settings in Static IP configuration in the same menu.

File sharing

On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*,

Windows Media Player 11, Twonky™ or similar.

Install the media server software on your computer and set it up to share your media files with the TV.

Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV.

* You can download the Philips MediaManager software from the Philips support site www.philips.com/support

Network problems

Wireless network not found or distorted

• Microwave ovens, DECT phones or other Wi-Fi

802.11b/g/n devices in your proximity might disturb the wireless network.

• Make sure that the firewalls in your network allow access to the TV's wireless connection.

• If the wireless network does not work properly in your home, try the wired network installation.

Internet does not work

• If the connection to the router is OK, check the router connection to the Internet.

The PC and Internet connection are slow

• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.

• Use a high-speed (broadband) Internet connection for your router.

12.3

Wired network

What you need

You need a network router to connect the TV to the

Internet. Use a router with a high-speed (broadband) connection to the Internet.

Connect the router

To connect and setup the router follow steps 1 to 5.

1 - Connect the router to the TV with a network cable

(Ethernet cable**).

2 - Make sure that the router is switched on.



Home Menu.

4 - Select Connect to network and press OK.

5 - Select Wired and press OK.

The TV constantly searches for the network connection. A message will be shown when the connection is successful.

Network configuration

If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On.

Alternatively, if you are an advanced user and want to install your network with static IP addressing, set the

TV to Static IP.

To set the TV to Static IP:



Home Menu

Select Network settings > Network settings > Network configuration > Static IP. With

Static IP selected in the menu, you can set the IP address and other necessary settings in Static IP configuration in the same menu.

**To fulfill EMC regulations, use a shielded FTP Cat.

5E Ethernet cable.

45

12.4

Network settings

To open the Network settings . . .



Home Menu.

2 - Select Network settings and press OK.

• View network settings

All current network settings are shown here. The IP and MAC address, signal strength, speed, encryption method, etc.

• Network settings

- Network type

Sets the network to Wired or Wireless.

- Network configuration

Sets the network configuration to DHCP or Static IP.

• Static IP configuration

If Static IP is selected in Network Settings menu, you can set all necessary static IP settings here.

• Reset Wi-Fi Miracast group

Clear the list of connected and blocked devices that are used with Miracast.

• Clear Internet memory

With Clear Internet memory, you can clear all Internet files stored on your TV. You clear your Philips Smart

TV registration and parental rating settings, your video store app logins, all Smart TV app favourites,

Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.

46

13

Your photos, videos and music

13.1

From a USB connection or computer

What you need

You can view your photos or play your music and videos from a connected USB flash drive or USB Hard

Drive. If you have a computer in your home network, you can view and play your files from your computer on the TV.

From a USB device

With the TV switched on, plug in a USB flash drive or

USB Hard Drive to one of the USB connections. The

TV detects the device and lists your files.

If the list does not appear automatically, press

SOURCE, select Browse USB and press OK.

Warning

If you try to pause or record a programme with a USB

Hard Drive connected, the TV will ask you to format the USB Hard Drive. This formatting will delete all current files on the USB Hard Drive.

Menu bar and sorting

With a USB device connected, the TV sorts the files by type. Navigate to the menu bar and select the type of file you are looking for.

If you browse files from a computer, you can only browse the files and folders as they are organized on the computer.

The menu bar

Navigate to the menu bar and select the type of file you want to watch or play.

Select  Photos ,  Music or  Videos .

Alternatively, you can open the  Folders view and browse your folders to look for a file.

Sorting

47

To browse your photos by date, month, year or alphabetically by name, press  Sort .

To browse your music by album, artist, genre or alphabetically by name, press  Sort .

Videos are sorted alphabetically.

View photos

To view photos, select  Photos in the menu bar, select a photo thumbnail and press OK.

If there are several photos in the same folder, select a photo and press  Slide show to start a slide show of all photos in this folder.

To jump to the next or previous photo, press CH 

or CH .

To stop the slide show or close the photo, press .

You can play music with a slide show.

Start the slide show after you started the music.

1 - Select a song or a folder with songs and press OK.

2 - Press CHANNEL GRID and select  Photos .

3 - Select a photo or a folder with photos and press

 Slide show .

Info

To view info on a photo (size, creation date, file path, etc.), select a photo and press INFO.

Press again to hide the info.

Options

Press OPTIONS.

• Shuffle

Shows your photos in a random order.

• Repeat

Plays the slide show continuously.

• Slide show speed

Sets the speed of the slide show.

• Slide show transition

Sets the style of the photo transitions.

To close Browse USB, press  and select another activity.

Play music

To play music, select  Music in the menu bar, select a song and press OK.

If there are more songs in the same folder, press 

Play all to play all songs in this folder.

To jump to the next or previous song, press CH  or CH .

To pause the music, press OK. Press OK again to continue.

To make a 10-second jump in a song or 10-second jump back, press  or .

To rewind or fast forward, press  or . Press the

keys several times to speed up - 2x, 4x, 8x, 16x, 32x.

To stop the music playback, press  (Stop).

If you press , the music keeps on playing.

Info

To view song info (title, artist, duration, etc.), select the song and press INFO.


Options

Press OPTIONS.

• Shuffle

Plays your music randomly.

• Repeat

Plays the song once or continuously.

• Screen off

If you only listen to music, you can switch off the TV screen to save energy.

To switch off the screen, press OPTIONS, select 

Eco settings in the menu bar, select Screen off and press OK. To switch the screen back on, press any key on the remote control.



13.2

Wi-Fi Miracast

About Wi-Fi Miracast

Your TV is a Wi-Fi Certified Miracast™ device. With

Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), share photos or anything else that's on screen of the device. No need to connect the device to your home network. Both the TV and the device must be

Wi-Fi Certified Miracast™ devices and have Miracast switched on.

Play videos

To play a video, select  Videos in the menu bar, select a video and press OK.

If there are more videos in the same folder, press  Play all to play all videos in this folder.

To jump to the next or previous video, press CH  or CH .

To pause the video, press OK. Press OK again to continue.

To make a 10-second jump forward or backward in a video, press  or .

To rewind or go fast forward, press  or . Press the keys several times to speed up - 2x, 4x, 8x, 16x,

32x.

To stop the video playback, press .

Info

To view info on a video (playhead position, duration, title, date, etc.), select the video and press INFO.


Options

Press OPTIONS.

• Subtitles

If available, you can switch subtitles On, Off or On during mute.

• Shuffle

Plays your videos in a random order.

• Repeat

Plays a video once or continuously.

For more information on Wi-Fi Certified Miracast™ go to www.wi-fi.org

Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi

CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.

Switch on Miracast

The TV comes with Miracast switched On and is ready to show the screen of a device with Miracast.

Switch off Miracast

If you do not want the TV to receive requests for screen sharing from other devices, you can switch off

Miracast on the TV.



Home Menu.

2 - Select Network settings > Wi-Fi

Miracast > Off and press OK.


4 - When Professional Mode: On  a Miracast Icon will be added in the Home Menu

48

Share a screen on TV

To share the screen of your smartphone, tablet or computer on the TV . . .

1 - Switch on the TV.

2 - Professional Mode: On  Press  to open the

Home menu, select Miracast and press OK.

3 - On the device, open an application such as Wi-Fi

Miracast, Wi-Fi Direct™, Intel®Wireless Display* or similar and start scanning for other Miracast devices.

4 - In the list of found devices, select the TV and connect.

5 - On the TV, agree to the request to connect to the TV. You might be asked to enter a PIN code from the device on the TV - enter the numbers with the digit keys on the remote control. Alternatively, you might be asked by the TV to enter a PIN code on the device. If you connect, the TV will show the screen of the device.

6 - On the device, select the videos, photos or files you want to watch on TV.

* Miracast is supported by WiDi 3.5 onwards.

Stop sharing

From the device

With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme.

From the TV

To stop watching the screen of the device on TV, you can . . .

• press TV to watch a TV broadcast

• press  to start another activity on TV

• press SOURCE to open the Sources menu and select a connected device.

Block a device

The first time you receive a request to connect from a device, you can block the device. This request, and all requests in the future, from this device, will be ignored.

To block a device, select Block . . . in the request window and press OK.

Unblock all devices

All previously connected and blocked devices are stored in the Wi-Fi Miracast list of connections. If you clear this list, all blocked devices will be unblocked.

To unblock all blocked devices . . .



Home Menu.

2 - Select Network settings > Reset Wi-Fi direct group.

3 - Press OK to clear the list.


Blocking a previously connected device

If you want to block a device that you previously connected, you need to clear the Wi-Fi Miracast connections list first. If you clear this list, you will have to confirm or block the connection for every device again.

Screen delay

The normal delay when sharing a screen with

Miracast is about 1 second. The delay might be longer if you are using older devices/computers with less processing power.

Specifics

• Miracast on this TV is subject to the HDCP protocol and cannot display copy-protected premium content sent by a device.

• The maximum video resolution supported is 720p.

49

14

Skype

14.1

About Skype

With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV.

14.2

What you need

To make a video call on Skype, you need the separately sold Philips PTA317 TV camera with a builtin microphone and a good connection to the Internet.

Before you can start Skype, the TV must have a good quality connection to the Internet. You can connect your TV either wireless or wired.

Skype account

To use Skype, you need to create a Skype account for yourself or for your family. You can create a new account for Skype on your TV or on your computer.

Skype Credit or Skype Subscriptions

With Skype, for a little cost, you can also call phones or mobile phones. Using your computer you can buy

Skype Credit or take a Skype subscription at www.skype.com

No emergency calls

Skype is not a replacement for your telephone and cannot be used for emergency calling.

14.3

Start with Skype

Install the camera

Connect the TV camera cable to one of the USB connections on the TV.

Bend the small clamp as shown in the illustration below and position the camera on the top of the TV.

Point the camera to the position you usually sit at.

When you are making a Skype call, you can pan, tilt or zoom in or out the camera image.

You can position the camera anywhere you want but it is recommended to put it away from the speakers of the TV.

If the TV camera is not connected, Skype will not start.

Sign in

Sign in to Skype with your Skype Name and password. If you don't have a Skype Name yet, you have to create a new Skype account.

To sign in to Skype…

1 - Press  to open the Home menu.

2 - Select Skype and press OK to start Skype and open the Sign in page.

3 - Select the Skype Name text field and enter your

Skype Name. To open the on screen keyboard, select the text field and press OK. If you have signed in before, press  GUIDE and select your Skype

Name. The TV remembers the 5 last Skype Names that signed in.

4 - Select the Password text field and enter your password.

5 - When done, select Sign in and press OK.

You are signed in if the Skype menu opens on screen.

Need help?

If you have forgotten your Skype Name or password, or are having problems signing in, please visit www.skype.com/support

New Skype account

If you don't have a Skype Name and Password yet, you can create a new Skype account on your computer. Once you have successfully created the new account, you can use your Skype Name and password to sign in on TV. To create a Skype account on your computer, go to www.skype.com

If you have a remote control with an integrated keyboard or have a USB keyboard connected to the

TV, you can create a new Skype account on your TV.

To create a new account on your TV…

1 - On the Skype Sign in page, select Create a new account and press OK.

2 - On the next menu, select Open browser and press OK.

3 - The TV opens the web page of www.skype.com

directly. You can create your new account on this web page.

4 - When Skype confirms that your new account is successfully created, leave the web browser and go back to the Sign in page of Skype on TV.

5 - Enter your Skype name and Password to sign in.

Skype Name

A Skype Name must begin with a letter, upper or lowercase. It must have 6 to 32 characters and can contain numbers. A Skype Name cannot contain a space.

Password

Your password must have 6 to 20 characters and

50

must at least contain one letter or one number. It cannot contain special characters like a trademark, bullet or euro sign. A Skype password cannot contain a space.

If you don't have a Skype Name and Password yet, you can create a new account on the sign in page on

TV.

1 - On the sign-in page, select New account and press

OK.

2 - Create your new account.

• Full name

Enter your full name.

• Skype name

Enter a name as your Skype name. Your Skype Name will be shown in the list of contacts of other Skype users. A Skype Name must begin with a letter, upper or lowercase. It must have 6 to 32 characters and can contain numbers. A Skype Name cannot contain a space.

• Password

Enter your password. Your password must have 6 to

20 characters and must at least contain one letter or one number. It cannot contain special characters like a trademark, bullet or euro sign. A Skype password cannot contain a space.

• Email

Enter your email address.

3 - Read and accept the Skype Terms of Use.

4 - If your new account was accepted, you are signed in.

You can edit or complete your Skype profile on your computer. Start Skype on your computer, sign in with your Skype Name and Password and open your

Skype profile. You can change your profile picture, add a mood message or set the privacy settings.

Microsoft account

If you have a Microsoft account, you can use this account to sign in to Skype on TV.

To sign in with a Microsoft account…

1 - On the Skype Sign in page, select Sign in with

Microsoft account and press OK.

2 - Select Next and press OK. The TV will open the

Microsoft account sign in web page.

3 - Enter your Microsoft account email and password.

4 - Select the Submit button and press OK.

No emergency calls

No emergency calls with Skype


14.4

Skype menu

When you have signed in successfully, Skype opens the Skype menu.

The Skype menu items are…

• My profile - your Skype name

To view or modify your Skype profile. Select your

Skype Name and press OK.

• People

In People, you can start making a Skype call and manage your contacts.

• Call phones

In Call phones, you can call a landline or a mobile phone number by dialing the number on a dial pad.

You must have Skype Credit or a Skype subscribtion to call a phone number. You can't select Call phones if a camera and microphone are not connected.

• History

In History, you can view your missed and former calls or view Contact requests.

• Settings

In Settings, you can change your password, set your privacy and voicemail settings or view your blocked contacts and much more.

• Sign out

To sign out of Skype on TV.

51

14.5

My profile

In My profile, you can edit your personal profile for

Skype.

• Public

View or change your profile information that can be viewed by your contacts.

• Phone

You can enter or change your home, office or mobile phone number here.

• Private

View or change your email address, check the amount of credit you have or view the subscription information, or write a message that reflects your mood.

• Profile picture

If you did not upload a profile picture with your computer yet, you can select one of the available avatars as Profile picture here.

• Online status

You can change your online status. Select the status you want your contacts to see when you are online.

14.6

People

Your contacts

In People, you can find the list of your Skype contacts.

Your contacts are shown with their Skype

Name. Contacts are online and available for a Skype call when a green dot is shown next their name.

You can use the text box in the top left corner of the contact page to search for a contact within your contact list. Or, simply scroll down the list to find the contact you want.

Add a contact

Add a Skype contact

In People, the list of your contacts, you can add a new Skype contact.

Add a Skype contact

If you know the Skype Name or email of a friend,

Skype can easily find your contact. If you do not know their Skype Name or email, you can also try to look for them by name.

To add a Skype contact…

1 - On the Contacts page, press OPTIONS.

2 - Select Add Skype Contact and press OK.

3 - Enter a Skype Name or email address of your new contact. You can also try to enter a name. To open the on screen keyboard, press OK. When you're done, press OK.

4 - Skype will search for the contact you are looking for and will show the search results.

5 - Select the contact you want and press OK to send a contact request.

6 - Write the request and press OK. Skype will send the request message to your new contact. If the contact accepts the request, the Skype Name of the new contact will appear in the your list and you can call your contact on Skype.

Add a phone number

In People, the list of your contacts, you can add a phone number as a contact. You can call a phone with a Skype voice call. You need Skype Credits to make a phone call.

To add a phone number…

1 - On the Contacts page, press OPTIONS.

2 - Select Add a Phone Number and press OK.

3 - Enter the name of your contact. To open the on screen keyboard, press OK. When you're done, press

OK.

4 - Enter the phone number of your contact. Always start with a country code (e.g. +31 for The

Netherlands). Do not use the double zero. When you're done , press OK. The name of your phone number contact will appear in your list.

Accept a contact request

When you receive a Contact request, a small icon will show next to History in the Skype menu.

To accept a contact request…

1 - In the Skype menu, select History and press OK.

2 - Select Contact requests and press OK. Select the

52

request and press OK. Skype will ask you to accept this contact. If you accept, the contact will appear in your contact list.

Block a contact

You can Block a Skype contact. A blocked contact will be unable to contact you on Skype. A blocked contact will not be notified, you will appear as being offline in the contact list of the blocked contact. You can always unblock contacts you have blocked.

To block a contact…

1 - On the Contacts page, select the contact you want to block.

2 - Press OPTIONS and select Block and press OK.

The contact is blocked.

To unblock a contact…

1 - Select a contact that is blocked.

2 - Press OPTIONS and select Unblock and press OK.

The contact is unblocked.

To view a list of blocked contacts…

1 - In the Skype menu, select Settings and press OK.

2 - Select Blocked contacts and press OK. The list will show all contacts you have blocked.

Video or voice call

Make a Video call

Make a Video call to call and see your friends on your

TV screen.

To make a Video call…

1 - On the Contacts page, select the contact you want to call.

2 - Select Video call and press OK. If your contact is on Skype, has a Skype camera connected and answers the call, you can see this person on TV.

3 - To end the call, select  End call and press OK.

When your Skype camera is switched on, a blue indicator LED lights up. You can check what your contact can see in the small screen on the bottom right of the TV screen.

To switch the Skype camera off, select  Video Off and press OK. To switch it back on, select Video On and press OK.

To mute your microphone, select  Mic Off and press OK. To switch it back on, select  Mic On and press OK.

While you are making a video call, you can change the viewpoint of the camera.

Remove or rename

You can Remove or Rename contacts.

To remove a contact…

1 - On the Contacts page, select the contact you want to remove.

2 - Press OPTIONS and select Remove and press OK.

The contact is removed from the list.

To rename a contact…

1 - On the Contacts page, select the contact you want to rename.

2 - Press OPTIONS and select Rename and press

OK.

3 - Enter the new name for this contact in the text field. To open the on screen keyboard, press OK.

When you're done, press OK.

14.7

Calling on Skype

Make a Voice call

Make a Voice call to call without video, with the camera switched off.

To make a Voice call…

1 - On the Contacts page, select the contact you want to call.

2 - Select Call and press OK. If your contact is on

Skype and answers the call, you can talk to your contact.


A contact can add you to a voice call with more than one participant. You cannot add an extra participant yourself.

Calling phones

With Skype you can also call landline phones and mobile phones. To call phones you need to buy

Skype Credit or a Skype subscription.

To call a phone…

1 - On the Contacts page, select a phone number contact.

2 - Select Call and press OK. You must have Skype

Credits available or have a Skype subscription to make a call with a phone number. If your contact

53

answers the phone, you can talk to your contact.


With Skype, you can also call a phone number directly. You can enter the phone number with the dial pad.

To open the dial pad…

1 - In the Skype menu, select Call phones and press

OK.

2 - If the dial pad is not on screen, select  Show

Dial Pad and press OK.

3 - Dial the phone number. You can navigate to the numbers and press OK or use the number keys on the remote control.

No emergency calls


Voicemail

About Voicemail

If someone calls you on Skype and you do not take the call, he or she can leave a spoken message on your Skype voicemail. If you call a contact and they can't take the call, you can send a Skype voicemail to your contact.

To send a voicemail or to receive a voicemail, you - or your contact - must set up Skype voicemail first. You can set up Voicemail on your computer. Go to www.skype.com

When you made voicemail available for you on a computer, set your voicemail preferences in the

Skype menu > Settings > Voicemails.

Receiving a call

When you are signed in to Skype and watching TV, a ringtone and a message on screen will alert you of an incoming call. The message will show who is calling and you can answer or decline the call.

To answer the call, select Answer with video and press OK.

To answer the call with the camera switched off, select Answer with audio and press OK.

To decline the call, select Decline call and press OK.

Record a Voicemail

When you call a contact and they can't take the call, you can leave a voicemail.

To record a voicemail…

1 - Call a contact. If your call was not answered,

Skype will propose to send a Voicemail.

2 - Select Yes and speak your message.

3 - To stop recording, select End call and press OK.

History

In the History page of the Skype menu, you will find a list of all calls you made, including the calls you missed. You can also see new contact requests and listen to voicemails.

To view a list, select All calls, Missed calls, Incoming calls or Outgoing calls and press OK.

To view new contact requests, select Contact requests and press OK.

To view and listen to your voicemails, select

Voicemails and press OK.

For how long your Skype events are kept in this history list depends on the amount of contacts you have and how intensively you use Skype.

Play a Voicemail

A contact can send a voicemail message to you. If a voicemail was sent to you, a small icon will show on the Skype menu. You can play a voicemail from the

History page.

To play a voicemail…

1 - In the Skype menu, select History and press OK.

2 - Select Voicemails and press OK.

3 - Select the voicemail you want to play and press

OK. You can listen to a voicemail as many times you want. To manage your voicemails, press OPTIONS .

14.8

Skype credit

On Skype, you can buy Skype Credit or take a Skype subscription. With Skype Credit or a Skype subscription available, you can call landline phones and mobile phones with your TV.

Buy Skype Credit

To buy Skype Credit or take a Skype subscription, sign in to Skype on your computer.

The Skype Credit you buy will be available when you sign in to Skype on your TV.

54

The amount of credit or the subscription information is shown on each page where you can make a phone call.

Skype Credit low

You will be notified if your credit is too low to make a phone call.

14.9

Skype settings

Signing in

You can set Skype to automatically sign in when you select Skype from the Home menu. You do not need to enter your Skype Name or password.

To sign in when Skype starts…

1 - Sign in to Skype with your account.


3 - Select Signing in and press OK.

4 - Press  (right) to select the check box and press

OK to mark Sign me in when Skype starts.

or to No one.

To set the Video settings…



3 - Select Video.

4 - Press  (right) to select the radio buttons and press OK to mark or unmark.

Privacy

You can set Skype to restrict incoming Skype calls.

You can allow calls from Anyone or from From people in my contact list only.

To set the Privacy settings…



3 - Select Privacy.

4 - Press  (right) to select the radio buttons and press OK to mark or unmark.

Change password

You can change your current Skype password and enter a new password for your Skype account.

To change your password…



3 - Select Change password.

4 - Press  (right) to select Current password and enter your current password. Press OK first if you want to use the on screen keyboard.

5 - Press  (down) to select New password and enter you new password.

6 - Press  (down) again to select Repeat new password and re-enter the new password.

7 - Press  (down) again to select Apply to send the new password for confirmation.

Video

You can set Skype to restrict the use of video in Skype calls.

With Automatically receive video from, you can set

Skype to automatically receive and show video from

Anyone, People in my contact list only or from No one.

With Show that I have video to, you can set Skype to send out your video to People in my contact list only

55

Blocked contacts

You can view a list of all your Blocked contacts.

To view the list…



3 - Select Blocked contacts and press OK. To manage your blocked contacts, press OPTIONS .

Voicemail

You can set some preferences for sending voicemails.

If you allow a contact to send you a voicemail when you can't take the call, check the box of Send unanswered calls to voicemail. Leave the box unchecked, if you do not want to receive voicemails.

If you allow a contact to send you a voicemail when you can't answer the call within 15 seconds and you are in another call, check the box of I am already in a call.

If you allow a voicemail, when you declined a call, check the box of I decline an incoming call.

To set your preferences for voicemail…



3 - Select Voicemail and press OK.

4 - Press  (down) or  (up) to select a check box.

Press OK to check or uncheck.

Call forwarding

Never miss a Skype call with Call Forwarding.

If you are not online or can't take the call, you can forward a Skype call to any phone or mobile phone.

You can also forward a Skype call to another Skype account. You can set up to three phone numbers or

Skype Names in order of preference to forward calls to. You need Skype Credit or a Skype subscription to forward calls to phones. Forwarding Skype calls to other Skype accounts is free of charge. For more information on call forwarding, go to www.skype.com/support

To set up call forwarding…



3 - Press OK to check the check box for Forward calls when I am not on Skype.

4 - In the entry fields below, enter the phone numbers or Skype Names from your contact list in order of preference to forward your calls to. Always add the country code for phone numbers.

5 - Change, if necessary, the amount of seconds before Skype forwards your call.

6 - Select Save to store your Call Forwarding setup.

Camera zoom, pan and tilt

You can set the viewpoint of your camera. You can zoom in or out, pan or tilt the camera frame. While you are in a Video call, you can set the camera viewpoint.

To set the camera viewpoint…

1 - Start a Video call and wait until the call is ongoing.

2 - Press  (right) to select the icon above the small screen and press OK. A bar with colour key functions appears.

3 - To shift (pan) the camera frame, press  (left) or

 (right). To tilt the camera frame, press  (up) or

 (down). To zoom in, press  Zoom in . To zoom out, press  Zoom out.

4 - Press  Done to store the camera viewpoint and to go back to your Skype call.

14.10

Sign out

When you sign out of Skype, you are signing out your

Skype account. Your Online status will change to

Offline. Your contacts will not be able to call you.

To sign out…

1 - Press  Back from anywhere within Skype to return to the Skype menu.

2 - Select Sign out in the Skype menu and press OK.

The TV will ask you to quit Skype or to use Skype with another Skype account.

14.11

Quit Skype

When you sign out of Skype, the Skype application on TV is still active. Another Skype account can sign in or you can create a new account. To stop the Skype application on TV, you must quit Skype.

14.12

Terms of use & Privacy Policy

Read the Terms of Use of Skype at www.skype.com/go/tou

Also read the Privacy Policy at www.skype.com/go/privacy

56

15

Smart TV

15.1

About Smart TV

Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.

With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV with your tablet.

With your TV connected to the Internet, you can watch a rental video from an online video store, read the online TV guide. The Smart TV Apps add to the fun with all sorts of entertainment and convenient services.

15.2

What you need

To enjoy Smart TV Apps you must connect the TV to a router with a high-speed (broadband) connection to the Internet. You can use a home network connected to the Internet. You do not need a computer.

Tip

To enter text or to navigate an Internet page more easily, you can consider to connect a USB keyboard and a USB mouse to the TV.

15.3

Smart TV Apps

Open Smart TV

The Smart TV start page is your link to the Internet.

You can rent movies online, read newspapers, watch videos and listen to music, also shop online, open your social network page (Twitter . . .) or watch TV programmes when it suits you with Online TV. To do this, you open Apps - Internet sites which are tailored for TV. With your TV connected to the Internet, you can open Smart TV.

Open Smart TV

To open the Smart TV start page, press SMART TV.

Alternatively, you can press , select Smart TV and press OK.

The TV connects to the Internet and opens the Smart

57

TV start page. This may take a few seconds.

Close Smart TV

To close the Smart TV start page, press  and select another activity.

TP Vision Europe B.V. bears no responsibility regarding the content and the quality of the content provided by the content service providers.

Smart TV start page

1 - Now on your TV

2 - Country Flags

3 - Recommended Apps

Country Flags

Apps are organized by Country. Select the desired country flag to see the overview of available apps for that profile.

Recommended Apps

In this window, Philips presents a range of recommended Apps for your country, Apps for Online

TV or a selection of rental movies from Video stores.

You can select and open them from the

Recommended Apps window.

Open an App

The list of your Apps on the Smart TV start page can be several pages long. Use the arrow keys to go to the next or previous page. Alternatively, press CH 

(Next page) or CH  (Previous page).

Open an App

To open an App . . .

1 - Press  and select Smart TV.

2 - On the start page, select the desired Country

Flag and Press OK.

3 - Select an App icon and press OK.

4 - In an App, press  to go back 1 step or page.

Close an App

To close an App and return to the Smart TV start page, press SMART TV.

Reload an App page

If an App page did not load properly, press OPTIONS and select Reload to reload the page.

Zoom

To zoom in on an App page . . .

1 - Press OPTIONS and select Zoom page.

2 - Use the slider bar to set the zoom level.

3 - Return to normal view by resetting the slider bar.

View security info

You can check the security level of an App page.

On an App page, press OPTIONS and select Security info. If a lock  is shown next to the loading animation on the bottom of the screen while loading a page, the transfer is secured.

Rental video Apps

With the video store Apps in Smart TV, you can rent your favourite movie from an online rental video store. You can pay securely with your credit card.

Rent a movie

1 - Open a Video store App in your list of Apps or select a recommended video on the Smart TV start page.

2 - Select a movie.

3 - Make the online payment.

4 - Start watching. You can use the  (Play) and 

(Pause) keys.

Most Video stores ask you to create a login account.

Streaming video

With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard

Drive connected, you can also download rental movies from video stores that offer movie downloading only. You can pause or restart a downloaded rental movie. Consult the video store regarding the rental duration of rental movies.

Internet traffic

Streaming or downloading many videos may exceed your monthly Internet traffic limit.

* If available in your region.

World Wide Web

The Internet App opens the World Wide Web on your

TV.

On your TV, you can view any Internet website but most of them are not tailored for a TV screen.

• Some plug-ins (e.g. to view pages or videos) are not available on your TV.

• Internet pages are shown one page at a time and full screen.

15.4

Reset Smart TV

To reset your connection with Smart TV, clear the

Internet memory on the TV.

You will clear your Philips Smart TV registration and parental rating setting, your video store app logins, all

Smart TV app favourites, Internet bookmarks and history.

To clear the Internet memory . . .



Home Menu.

2 - Select Network settings > Clear Internet memory and press OK.

Online TV

With the Online TV App on the Smart TV start page*, you can watch TV programmes you missed or watch programmes whenever it suits you best.

Open Online TV

To open the Online TV App . . .

1 - Press SMART TV.

2 - On the start page, select the  Online TV icon and press OK.

3 - Select a programme on the page and press OK to start watching. You can use the  (Play) and 

(Pause) keys.

List per broadcaster

To view the Online TV programmes ordered by broadcaster, press  All broadcasters .

Select a broadcaster and press OK.

58

16

Specifications

16.1

Environmental

Saving energy

The Eco settings bundle the settings that help the environment.

While you are watching TV channels, press adjust and select Eco settings to open Eco settings.

Active settings are marked with a . You can mark or unmark each setting with the OK key.

Press  again to close Eco settings .

Energy saving

This Picture style sets the picture in the most ideal energy conscious setting.

Screen off

If you only listen to music, you can switch off the TV screen to save energy.

Select Screen off and press OK. To switch the screen back on, press any key on the remote control.

Light sensor

To save energy, the built-in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. The built-in light sensor automatically adjusts the picture, to the lighting conditions of the room.

Switch off timer

If you do not press a key on the remote control during a 4 hour period, or if the TV receives no signal for 10 minutes, the TV switches off automatically to save energy.

If you use the TV as a monitor or use a digital receiver to watch TV (a Set-top box - STB) and you do not use the remote control of the TV, deactivate the automatic switch off.

In addition to the Eco settings, your TV also has environmentally friendly technology with regard to power consumption.

Inactive devices off

Switch off connected EasyLink HDMI-CEC (Consumer

Electronic Control) compliant devices that are inactive.

European energy label

The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.

On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV

End of use

Disposal of your old product and batteries

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the

European Directive 2006/66/EC, which cannot be disposed with normal household waste.

Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health.

59

16.2

Reception

• Aerial input : 75 ohm coaxial (IEC75)

• Tuner bands : Hyperband; S-Channel; UHF; VHF

• DVB :

- For models xxHFL5010: DVB-T2, DVB-T, DVB-C

• Analogue video playback : NTSC; SECAM; PAL

• Digital video playback : MPEG2 SD/HD (ISO/IEC

13818-2); MPEG4 SD/HD (ISO/IEC 14496-10)

• Digital audio playback (ISO/IEC 13818-3)

Note: See selected countries on the TV type plate

16.3

Display

Type

• Diagonal screen size :

- 70 cm / 28 inch

- 80 cm / 32 inch

- 100 cm / 40 inch

- 121 cm / 48 inch

- 139 cm / 55 inch

Display resolution: 1920x1080p

32HFL5010, 40HFL5010, 48HFL5010, 55HFL5010

Display resolution: 1365x768p

28HFL5010

Input resolution for HD/FHD TVs

Video formats

Resolution — Refresh rate

• 480i - 60 Hz

• 480p - 60 Hz

• 576i - 50 Hz

• 576p - 50 Hz

• 720p - 50 Hz, 60 Hz

• 1080i - 50 Hz, 60 Hz

• 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz

Computer formats

Resolutions (amongst others)

• 640 x 480p - 60 Hz

• 800 x 600p - 60 Hz

• 1024 x 768p - 60 Hz

• 1280 x 768p - 60 Hz

• 1360 x 765p - 60 Hz

• 1360 x 768p - 60 Hz

60

• 1280 x 1024p - 60 Hz

• 1920 x 1080p - 60 Hz

16.4

Power

Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/support

Power

• Mains power : AC 220-240V +/-10%

• Ambient temperature : 0°C to 40°C

• Standby power consumption : < 0.3W

• Power saving features : Energy saving, Screen off,

Light sensor*, Switch off timer, Inactive devices off.

The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2). The maximum power rating, stated between brackets, is used for electrical safety (IEC 60065 Ed. 7.2).

16.5

Dimensions and weights

28HFL5010

• without TV stand:

Width 635.1 mm - Height 392.7 mm - Depth 73.7 mm -

Weight ±4.5 kg

• with TV stand:

Width 635.1 mm - Height 441.1 mm - Depth 190 mm -

Weight ±5.07 kg

32HFL5010


Width 726.5 mm - Height 425.4 mm - Depth 76.8 mm

- Weight ±4.96 kg

• with TV stand:


- Weight ±6.24 kg

40HFL5010



- Weight ±7.7 kg

• with TV stand:


- Weight ±9.1 kg

48HFL5010



- Weight ±12.4 kg

• with TV stand:

Width 1081.8 mm - Height 685.7 mm - Depth 249.4

mm - Weight ±13.9 kg

55HFL5010



- Weight ±15.1 kg

• with TV stand:

Width 1239.2 mm - Height 778.2 mm - Depth 265.8

mm - Weight ±17.5 kg

16.6

Wall mounting

• 28HFL5xx0 - VESA MIS-F 100x100, M4





Note:

Before mounting the TV on the wall, remove the existing VESA screws on the back panel.

Warning:

Follow all instructions provided with the TV mount. TP

Vision Europe B.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.

To prevent damage to cables and connectors, leave a gap of at least 5.5 cm / 2.2 inches from the back of the TV.

Before you mount the TV on the wall, find the correct length of the screw. To find the length of the screw, add the thickness of your wall mount to the screw length (y), as shown in the graphic.

16.7

Connectivity

For 28HFL5010/32HFL5010/40HFL5010/

48HFL5010/55HFL5010

TV Rear

• Audio In (DVI/VGA): Stereo mini-jack 3.5mm

• SCART: Audio L/R, CVBS in, RGB

• YPbPr : Y Pb Pr, Audio L/R : Stereo mini-jack 3.5mm

• Digital Audio out: Optical, Toslink

• VGA

• 1x HDMI

• Bathroom speaker audio out

• DC out: 12V

• SXP

TV Side

• 1x HDMI

• 1x USB 2.0

• Common interface slot: CI+/CAM

• Headphones: Stereo mini-jack 3.5mm

16.8

Multimedia

Connections

• USB 2.0

• Ethernet LAN RJ-45*

• Wi-Fi 802.11b/g/n (built-in)*

Supported USB file systems

• FAT 16, FAT 32, NTFS

Playback formats

• Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,

MPEG-4, Matroska (MKV), Quicktime (MOV, M4V,

M4A), Windows Media (ASF/WMV/WMA)

• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2,

MPEG-4 Part 10 AVC (H264), VC-1, WMV9

• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB,

Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital

Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3),

WMA (v2 to v9.2), WMA Pro (v9/v10)

• Subtitles :

– Formats : SAMI, SubRip (SRT), SubViewer (SUB),

MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT)

– Character encodings : UTF-8, Central Europe and

Eastern Europe (Windows-1250), Cyrillic

(Windows-1251), Greek (Windows-1253), Turkish

(Windows-1254), Western Europe (Windows-1252)

• Image Codecs : JPEG

• Limitations :

– Maximum supported total bit rate for a media file is

30Mbps.

– Maximum supported video bit rate for a media file is 20Mbps.

– MPEG-4 AVC (H.264) is supported up to High

Profile @ L4.1.

– VC-1 is supported up to Advanced Profile @ L3.

Wi-Fi Certified Miracast™*

This TV supports WiDi 4.x devices.

Supported media server software (DMS)*

• PC - Microsoft Windows XP, Vista or Windows 7

– You can use any DLNA certified® media server software.

– Microsoft - Windows Media Player

• Mac OS X

– You can use any DLNA certified® media server software.

• Mobile devices

– Philips MyRemote - iOS, Android

– Interoperability and performance may vary, depending on the capabilities of the mobile device and the software used.

ESD regulations

This apparatus meets performance criteria B for ESD.

In case the apparatus does not recover in file sharing mode due to electrostatic discharge, user interference is required.

* Only for Smart TVs.

61

17

Software

17.1

Software update

Update from USB

It might be necessary to update the TV software. You need a computer with an high-speed Internet connection and a USB memory device to upload the software on the TV. Use a USB memory device with

256MB free space. Make sure that write protection is switched off.

1 - To Start the update on TV



Home Menu.

2 - Identify the TV

Insert the USB memory into one of the USB connections of the TV.

Select Start and press OK. An identification file is written on the USB memory device.

3 - Download the TV software

Insert the USB memory into your computer.

On the USB memory device, locate the file update.htm and double click it.

Click on Send ID.

If new software is available, download the .zip file.

After the download, unzip the file and copy the file autorun.upg onto the USB memory device.

Do not place this file in a folder.

4 - Update the TV software

Insert the USB memory into the TV again. The update starts automatically.

The TV switches itself off for 10 seconds and then back on again. Please wait.

Do not . . .

• use the remote control

• remove the USB memory device from the TV

If a power cut occurs during the update, never remove the USB memory device from the TV. When the power returns, the update will continue.

At the end of the update, the message Operation successful appears on screen. Remove the USB memory device and press  on the remote control.

Do not . . .

• press  twice

• press the power switch on the TV

The TV switches itself off (for 10 seconds) and then back on again. Please wait.

The TV software has been updated. You can use the

TV again.

To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.

Update from Internet

If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software.

You need a high-speed (broadband) Internet connection.

If you receive this message, we recommend you carry out the update.

Select Update. Follow the instructions on screen.

You can also look for new updates yourself.

To look for an update . . .


2 - Select Update software > TV with Internet, then press OK. Follow the instructions on screen.

When the update is complete, the TV switches off and back on again automatically.

Wait for the TV to switch itself back on.

Do not press the Power switch  on the TV.

17.2

Software version

To view the current TV software version . . .



Home Menu.

2 - Select Software settings and press OK.

3 - Select Current software info and see Release Version .


17.3

Open source software

This television contains open source software. TP

Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences.

This offer is valid up to three years after product purchase to anyone in receipt of this information.

To obtain the source code, please write in English to .

. .

Intellectual Property Dept.

TP Vision Europe B.V.

62

Prins Bernhardplein 200

1097 JB Amsterdam

The Netherlands

17.4

Open source license

Acknowledgements and License Texts for any open source software used in this Philips TV.

This is a document describing the distribution of the source code used on the Philips TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain source code for this software can be found in the user manual.

PHILIPS MAKES NO WARRANTIES WHATSOEVER,

EITHER EXPRESS OR IMPLIED, INCLUDING ANY

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE, REGARDING THIS

SOFTWARE. Philips offers no support for this software. The preceding does not affect your warranties and statutory rights regarding any Philips product(s) you purchased. It only applies to this source code made available to you.

Freetype (2.4.3)

FreeType is a software font engine that is designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output

(glyph images).

This piece of software is made available under the terms and conditions of the FreeType Project license, which can be found below.

Source: http://freetype.sourceforge.net zlib (1.2.3)

The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data.

This piece of software is made available under the terms and conditions of the zlib license, which can be found below.

Source: http://www.zlib.net/

Fraunhofer AAC Ecnoder (3.3.3)

AAC Ecnoder.

Source: Android JB source code unicode (3.2)

This library is used to perform UNICODE string manipulation.

This piece of software is made available under the terms and conditions of the ICU license, which can be found below.

Source: http://www.icu-project.org/ libpng (1.2.43)

PNG decoder.

This piece of software is made available under the terms and conditions of the libpng license, which can be found below.

Source: http://www.libpng.org/pub/png/libpng.html libjpg (6b)

This library is used to perform JPEG decoding tasks.

This piece of software is made available under the terms and conditions of the libjpg license, which can be found below.

Source: http://www.ijg.org/ libmng (1.0.10) libmng -THE reference library for reading, displaying, writing and examining Multiple-Image Network

Graphics.MNG is the animation extension to the popular PNG image-format.

This piece of software is made available under the terms and conditions of the libmng license, which can be found below.

Source: http://sourceforge.net/projects/libmng/files/ u-Boot loader (1.3.4)

Used by boot loader and only linked with boot loader, GPL license.

This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below.

Source: http://sourceforge.net/projects/u-boot/files/ u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download

Libcurl (7.21.7)

HTTP client;libcurl is a free and easy-to-use clientside URL transfer library, supporting FTP, FTPS, HTTP,

HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,

LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM,

Negotiate, Kerberos4), file transfer resume, http proxy tunneling and more!

This piece of software is made available under the terms and conditions of the Libcurl license, which can be found below.

Source: http://curl.haxx.se/ c-ares (1.7.4) c-ares is a C library that performs DNS requests and name resolves asynchronously.

This piece of software is made available under the terms and conditions of the c-ares license, which can be found below.

Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz openssl (1.0.0d)

OpenSSL is an open source implementation of the

SSL and TLS protocols. The core library (written in the

63

C programming language) implements the basic cryptographic functions and provides various utility functions. Wrappers allowing the use of the OpenSSL library in a variety of computer languages are available.

This piece of software is made available under the terms and conditions of the 1.7.4 license, which can be found below.

Source: http://www.openssl.org/source/openssl-1.0.0.tar.gz

Expat (2.01) xml paser; Expat is an XML parser library written in C.

It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). An introductory article on using.

This piece of software is made available under the terms and conditions of the Expat license, which can be found below.

Source: http://expat.sourceforge.net/

DirectFB include SAWMAN (1.4.0)

It is a software library for GNU/Linux/UNIX based operating system with a small memory footprint that provides graphics acceleration, input device handling and abstraction layer, and integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications.

This piece of software is made available under the terms and conditions of the DirectFB license, which can be found below.

Source: http://sourceforge.net/projects/jointspace/fil es/remote_applications_SDK/remote_spplications_S

DK_v1.3.1/DirectFB141_source_1.3.1.7z/download

SAWMAN

SquashFS is a compressed read-only file system for

Linux. SquashFS compresses files, inodes and directories, and supports block sizes up to 1 MB for greater compression. SquashFS is also the name of free/open software, licensed under the GPL, for accessing SquashFS filesystems.

Source: http://squashfs.sourceforge.net/

Linux Kernel (3.0)

The Linux kernel is an operating system kernel used by the Linux family of Unix-like operating systems.

This piece of software is made available under the terms and conditions of the Linux Kernel license, which can be found below.

Source: http://www.kernel.org

SQLite (3.7.2)

SQLite is a in-process library that implements a selfcontained, serverless, zero-configuration, transactional SQL database engine.

This piece of software is made available under the

64 terms and conditions of the SQLite license, which can be found below.

Source: http://www.sqlite.org/download.html

SquashFS (3.4)

SquashFS is a compressed read-only file system for

Linux. SquashFS compresses files, inodes and directories, and supports block sizes up to 1 MB for greater compression. SquashFS is also the name of free/open software, licensed under the GPL, for accessing SquashFS filesystems.

This piece of software is made available under the terms and conditions of the SquashFS license, which can be found below.

Source: http://squashfs.sourceforge.net/ glibc (2.6.1)

Any Unix-like operating system needs a C library: the library which defines the ``system calls'' and other basic facilities such as open, malloc, printf, exit...The

GNU C library is used as the C library in the GNU system and most systems with the Linux kernel

This piece of software is made available under the terms and conditions of the glibc license, which can be found below.

Source: http://www.gnu.org/software/libc/ mtd-utils (1)

The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL,

FFS2, etc., but will only need to provide simple routines for read, write and erase. Presentation of the device's contents to the user in an appropriate form will be handled by the upper layers of the system.

This piece of software is made available under the terms and conditions of the mtd-utils license, which can be found below.

Source: http://www.linuxmtd.infradead.org/index.html libusb (1.0.6)

This is the home of libusb, a library that gives user level applications uniform access to USB devices across many different operating systems. libusb is an open source project licensed under the GNU Lesser

General Public License version 2.1.Many participants in the libusb community have helped and continue to help with ideas, implementation, support and improvements for libusb.

This piece of software is made available under the terms and conditions of the libusb license, which can be found below.

Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ libusb-compat (0.1.3)

Library to enable user space application programs to communicate with USB devices.

This piece of software is made available under the terms and conditions of the libusb-compat license, which can be found below.

Source: http://libusb.wiki.sourceforge.net/LibusbCompat0.1

NTFS-3G Read/Write Driver (2010.5.22)

NTFS-3G is an open source cross-platform implementation of the Microsoft Windows NTFS file system with read-write support. NTFS-3G often uses the FUSE file system interface, so it can run unmodified on many different operating systems. It is runnable on Linux, FreeBSD, NetBSD, OpenSolaris,

BeOS, QNX, WinCE, Nucleus, VxWorks,

Haiku,MorphOS, and Mac OS X It is licensed under either the GNU General Public License or a proprietary license. It is a partial fork of ntfsprogs and is under active maintenance and development.

This piece of software is made available under the terms and conditions of the NTFS-3G Read/Write

Driver license, which can be found below.

Source: http://www.tuxera.com

WPA Supplicant (0.5.10 & 0.6.7)

These packages are used to provide WiFi access.The

supplier for these tools is Atheros.These pieces of software are made available under the terms and conditions of the GPL v2 license, which can be found below.

This piece of software is made available under the terms and conditions of the WPA Supplicant license, which can be found below.

Source: http://hostap.epitest.fi/wpa_supplicant/ ntfsprogs (2.0.0)

Some useful tool for ntfs file sytem.

This piece of software is made available under the terms and conditions of the ntfsprogs license, which can be found below.

Source: http://sourceforge.net/projects/linux-ntfs fuse (2.8.4)

Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel.

This piece of software is made available under the terms and conditions of the fuse license, which can be found below.

Source: http://fuse.sourceforge.net/ libiconv (1.11.1)

This library provides an iconv() implementation, for use on systems which don't have one, or whose implementation cannot convert from/to Unicode. .

This piece of software is made available under the terms and conditions of the libiconv license, which can be found below.

Source: http://ftp.gnu.org/pub/gnu/libiconv electric-fence (2.1.13)

Used for memory corruption detection.

This piece of software is made available under the terms and conditions of the electric-fence license, which can be found below.

Source: http://perens.com/FreeSoftware/ElectricFenc e/electric-fence_2.1.13-0.1.tar.gz liveMedia

When Wifi Display or streaming RtspPlayer are enabled.

This piece of software is made available under the terms and conditions of the electric-fence license, which can be found below.

Source: www.live555.com

QT (4.7.0)

Netflix skpe besttv pandora picasa? will use QT.

This piece of software is made available under the terms and conditions of the QT license, which can be found below.

Source: http://qt.nokia.com/ e2fsprogs (1.41.14) e2fsprogs provides the filesystem utilities for use with the ext2 filesystem, it also supports the ext3 and ext4 filesystems.

This piece of software is made available under the terms and conditions of the e2fsprogs license, which can be found below.

Source: http://e2fsprogs.sourceforge.net/ alsa (1.0.24.1)

Advanced Linux Sound Architecture (ALSA).

This piece of software is made available under the terms and conditions of the alsa license, which can be found below.

Source: http://www.alsa-project.org lvm2 (2.02.89)

DM_VERITY.

This piece of software is made available under the terms and conditions of the lvm2 license, which can be found below.

Source: ftp://sources.redhat.com/pub/lvm2/releases/ encfs (1.3.2)

A library provides an encrypted filesystem in userspace.

Source: http://www.arg0.net/encfs boost (1.15.0)

A library provides free peer-reviewed portable C++ source libraries is used for encfs.

Source: http://www.boost.org rlog (1.4)

A library that provides a flexible message logging facility for C programs and libraries is used for encfs.

65

Source: http://www.arg0.net/rlog iptables (1.4.15)

For Cross connection.

Source: http://www.netfilter.org/projects/iptables/ bash (3.2.48)

Bash is the shell, or command language interpreter, that will appear in the GNU operating system.

Bash is an sh-compatible shell that incorporates useful features from the Korn shell (ksh) and C shell

(csh).

It is intended to conform to the IEEE POSIX

P1003.2/ISO 9945.2 Shell and Tools standard.

It offers functional improvements over sh for both programming and interactive use.

In addition, most sh scripts can be run by Bash without modification.

Source: http://www.gnu.org/software/bash/ coreutils (6.9)

The GNU Core Utilities are the basic file, shell and text manipulation utilities of the GNU operating system.

These are the core utilities which are expected to exist on every operating system.

Source: http://www.gnu.org/software/coreutils/ findutils (4.2.31)

The GNU Find Utilities are the basic directory searching utilities of the GNU operating system.

These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands.

Source: http://www.gnu.org/software/findutils/ gawk (3.1.5)

If you are like many computer users, you would frequently like to make changes in various text files wherever certain patterns appear, or extract data from parts of certain lines while discarding the rest.

To write a program to do this in a language such as C or Pascal is a time-consuming inconvenience that may take many lines of code.

The job is easy with awk, especially the GNU implementation: gawk.

Source: http://www.gnu.org/software/gawk/ grep (2.5.1a)

The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines.

Source: http://www.gnu.org/software/grep/ gzip (1.3.12)

GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project. Mark Adler wrote the decompression part.

Source: http://www.gnu.org/software/gzip/ inetutils (1.4.2)

Inetutils is a collection of common network programs.

Source: http://www.gnu.org/software/inetutils/ iputils (s20101006)

The iputils package is set of small useful utilities for

Linux networking. It was originally maintained by

Alexey Kuznetsov.

Source: http://www.skbuff.net/iputils/ module-init-tools (3.12)

Provides developer documentation for the utilities used by Linux systems to load and manage kernel modules (commonly referred to as "drivers").

Source: https://modules.wiki.kernel.org/index.php/M ain_Page ncurses (5.7)

The Ncurses (new curses) library is a free software emulation of curses in System V Release 4.0, and more.

It uses Terminfo format, supports pads and color and multiple highlights and forms characters and functionkey mapping, and has all the other SYSV-curses enhancements over BSD Curses.

Source: http://www.gnu.org/software/ncurses/ net-tools (1.6)

The Net-tools?package is a collection of programs for controlling the network subsystem of the Linux kernel.

Source: http://www.linuxfromscratch.org/blfs/view/6.

3/basicnet/net-tools.html procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem.

The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill.

Source: http://procps.sourceforge.net/index.html psmisc (22.13)

This PSmisc package is a set of some small useful utilities that use the proc filesystem. We're not about changing the world, but providing the system administrator with some help in common tasks.

Source: http://psmisc.sourceforge.net/ sed (4.1.5) sed (stream editor) isn't an interactive text editor.

Instead, it is used to filter text, i.e., it takes text input, performs some operation (or set of operations) on it, and outputs the modified text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file.

Source: http://www.gnu.org/software/sed/

66

tar (1.17)

GNU Tar provides the ability to create tar archives, as well as various other kinds of manipulation.

For example, you can use Tar on previously created archives to extract files, to store additional files, or to update or list files which were already stored.

Source: http://www.gnu.org/software/tar/ util-linux-ng (2.18)

Various system utilities.

Source: http://userweb.kernel.org/~kzak/util-linuxng/ udhcpc (0.9.8cvs20050303-3)

Udhcpc is a very small?DHCP?client geared towards?embedded systems.

Source: http://udhcp.sourcearchive.com/downloads/

0.9.8cvs20050303-3/

Libxml2 (2.7.8)

The "libxml2" library is used in AstroTV as a support for the execution of NCL application. This library was developed for the GNOME software suite and is available under a "MIT" license.

Source: http://www.xmlsoft.org uriparser (0.7.7)

For MPEG-DASH

Source: http://uriparser.sourceforge.net/ xerces-c++ (3.1.1)

For MPEG-DASH

Source: http://xerces.apache.org/ webp (0.2.1)

For Netflix

Source: https://code.google.com/p/webp/ wget (1.10.2)

GNU Wget is a free software package for retrieving files using HTTP, HTTPS and FTP, the most widelyused Internet protocols.

It is a non-interactive commandline tool, so it may easily be called from scripts,?cron?jobs, terminals without X-Windows support, etc.

Source: http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz wireless_tools (0.29)

The Wireless Tools (WT)?is a set of tools allowing to manipulate the Wireless Extensions.

They use a textual interface and are rather crude, but aim to support the full Wireless Extension.

Source: http://www.hpl.hp.com/personal/Jean_Tourri lhes/Linux/Tools.html ezxml (0.8.6) ezXML is a C library for parsing XML documents. Used inside Philips libraries.

Source: http://sourceforge.net/projects/ezxml/

67

SQLite (3.7.7.1)

SQLite is a in-process library that implements a selfcontained, serverless, zero-configuration, transactional SQL database engine.

Source: http://www.sqlite.org/download.html

AES (aes-src-29-04-09.zip)

Advanced Encryption Standard (AES) is a specification for the encryption of electronic data.

Used inside Philips libraries.

Source: http://gladman.plushost.co.uk/oldsite/AES/ microhttpd (libmicrohttpd-0.9.9.tar.gz)

GNU libmicrohttpd is a small C library that is supposed to make it easy to run an HTTP server as part of another application.

The original download site for this software is : http://www.gnu.org/software/libmicrohttpd/This piece of software is made available under the terms and conditions of the LGPL v2.1 license

Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro httpd-0.9.9.tar.gz yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)

YAJL is a small event-driven (SAX-style) JSON parser written in ANSI C, and a small validating JSON generator. YAJL is released under the ISC license.

The original download site for this software is : http://lloyd.github.com/yajl/This piece of software is made available under the terms and conditions of the

ISC license

Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/ lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21

82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz

HMAC-SHA1 (0.1) keyed-hash message authentication code (HMAC) is a specific construction for calculating a message authentication code (MAC) involving a cryptographic hash function in combination with a secret cryptographic key.

As with any MAC, it may be used to simultaneously verify both the data integrity and the authentication of a message.

Any cryptographic hash function, such as MD5 or

SHA-1, may be used in the calculation of an HMAC; the resulting MAC algorithm is termed HMAC-MD5 or

HMAC-SHA1 accordingly.

Source: http://www.deadhat.com/wlancrypto/hmac_sha1.c gSoap (2.7.15)

The gSOAP toolkit is an open source C and C++ software development toolkit for SOAP/XML Web services and generic (non-SOAP) C/C++ XML data bindings.

Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are

Copyright 2000-2011 Robert A. van Engelen, Genivia

inc. All Rights Reserved.

Source: http://sourceforge.net/projects/gsoap2/ jquery (1.10.2) jQuery is a fast and concise JavaScript Library that simplifies HTML document traversing, event handling, animating, and Ajax interactions for rapid web development.

Source: http://jquery.com/

Libupnp (1.2.1)

The Linux* SDK for UPnP* Devices (libupnp) provides developers with an API and open source code for building control points, devices, and bridges that are compliant with Version 1.0 of the UPnP Device

Architecture Specification.

Source: http://upnp.sourceforge.net/ mDNSResponder (mDNSResponder-320.10.80)

The mDNSResponder project is a component of

Bonjour,

Apple's ease-of-use IP networking initiative:<http://developer.apple.com/bonjour/>

In our project, Bonjour is used for the automatic discovery of devices and services

Source: http://developer.apple.com/bonjour/

68

18

Troubleshooting and support

18.1

Troubleshooting

Channels

No digital channels found during the installation

See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country.

Make sure that all cables are properly connected.

Previously installed channels are not in the channel list

Make sure that the correct channel list is selected.

General

The TV does not switch on

• Disconnect the power cable from the power outlet.

Wait for one minute then reconnect it.

• Make sure that the power cable is securely connected.

Creaking sound at startup or switch off

When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance.

TV does not respond to the remote control

The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour.

If the TV continues to be unresponsive to the remote control, you can check if the remote control is working by means of a mobile phone camera. Put the phone in camera mode and point the remote control to the camera lens. If you press any key on the remote control and you notice the infra red LED flicker through the camera, the remote control is working.

The TV needs to be checked.

If you do not notice the flickering, the remote control might be broken or its batteries are low.

This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV.

The TV goes back to standby after showing the

Philips startup screen

When the TV is in standby, a Philips startup screen is

69 displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or the TV.

The standby light keeps on blinking

Disconnect the power cable from the power outlet.

Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV

Consumer Care.

Wrong menu language

Change the language back to your language.



Home Menu.




Picture

No picture / distorted picture

• Make sure that the antenna is properly connected to the TV.

• Make sure that the correct device is selected as the display source.

• Make sure that the external device or source is properly connected.

Sound but no picture

• Make sure that the picture settings are set correctly.

Poor antenna reception

• Make sure that the antenna is properly connected to the TV.

• Loud speakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV.

• If reception on only one channel is poor, fine-tune this channel.

Poor picture from a device

• Make sure that the device is connected properly.

• Make sure that the picture settings are set correctly.

Picture settings change after a while

Make sure that [Location] is set to [Home] . You can change and save settings in this mode.

A commercial banner appears

Make sure that [Location] is set to [Home].

Picture does not fit the screen

Change to a different picture format. Press FORMAT.

Picture format keeps changing with different channels

Select a non 'Auto' picture format.

Picture position is incorrect

Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device.

Computer picture is not stable

Make sure that your PC uses the supported resolution and refresh rate.

Sound

No sound or poor sound quality

If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction.

• Make sure that the sound settings are correctly set.

• Make sure that all cables are properly connected.

• Make sure that the volume is not muted or set to zero.

• Make sure that the TV audio output is connected to the audio input on the Home Theatre System.

Sound should be heard from the HTS speakers.

• Some devices may require you to manually enable

HDMI audio output. If HDMI audio is already enabled, but you still do not hear audio, try changing the digital audio format of the device to PCM (Pulse Code

Modulation). Refer to the documentation accompanying your device for instructions.

Connections

HDMI

• Note that HDCP (High-bandwidth Digital Content

Protection) support can delay the time taken for a TV to display content from an HDMI device.

• If the TV does not recognise the HDMI device and no picture is displayed, switch the source from one device to another and back again.

• If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct.

• If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable, make sure that an additional audio cable is connected to AUDIO IN (mini-jack only), if available.

EasyLink does not work

• Make sure that your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible.

No volume icon shown

• When a HDMI-CEC audio device is connected this behaviour is normal.

Photos, videos and music from a USB device do not show

• Make sure that the USB storage device is set to Mass

Storage Class compliant, as described in the storage device's documentation.

• Make sure that the USB storage device is compatible with the TV.

• Make sure that the audio and picture file formats are supported by the TV.

Choppy playback of USB files

• The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback.

18.2

Register

Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.

Go to www.philips.com/welcome

18.3

Online help

To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.

Go to www.philips.com/support .

On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our colaborators and ask your question directly or send a question by email.

You can download new TV software or the manual to read on your computer.

18.4

Consumer Care / Repair

For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV.

Or consult our website www.philips.com/support .

TV model number and serial number

You might be asked to provide the TV product model number and serial number. Find these numbers on

70

the packaging label or on the type label on the back or bottom of the TV.

 Warning

Do not attemp to repair the TV yourself. This may cause severe injury, irrepairable damage to your TV or void your warranty.

71

19

Safety and care

19.1

Safety

Important

Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply.

Risk of injury or damage to the TV

• Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs.

• If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly.

Place the TV on a flat, level surface that can support the weight of the TV and the stand.

• When wall mounted, ensure that the wall mount can safely bear the weight of the TV set. TP Vision bears no responsibility for improper wall mounting that results in accident, injury or damage.

• Parts of this product are made of glass. Handle with care to avoid injury or damage.

Risk of damage to the TV !

Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.

Secure the TV from falling over

Always use the supplied wall bracket to secure the TV from falling over. Mount the bracket and secure the

TV onto the bracket, even if you put the TV on the floor.

You can find the mounting instructions in the Quick

Start Guide that came with the TV. In case you lost this guide, you can download the guide from www.philips.com

Use the product type number of the TV to look for the

Quick Start Guide to download.

Risk of electric shock or fire

• Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV.

If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately.

Contact Philips TV Consumer Care to have the TV checked before use.

• Never expose the TV, remote control or batteries to excessive heat. Never place them near burning candles, naked flames or other heat sources, including direct sunlight.

• Never insert objects into the ventilation slots or other openings on the TV.

• Never place heavy objects on the power cord.

• Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Ensure that no strain is exerted on the power cord when you swivel the TV screen.

• To disconnect the TV from the mains power, the power plug of the TV must be disconnected. When disconnecting the power, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

Risk of injury to children

Follow these precautions to prevent the TV from toppling over and causing injury to children:

• Never place the TV on a surface covered by a cloth or other material that can be pulled away.

• Ensure that no part of the TV hangs over the edge of the mounting surface.

• Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and

TV to the wall or a suitable support.

• Teach children about the dangers of climbing on furniture to reach the TV.

Risk of swallowing batteries !

The remote control may contain coin-type batteries which can easily be swallowed by small children.

Keep these batteries out of reach of children at all times.

Risk of overheating

Never install the TV in a confined space. Always leave a space of at least 10 cm or 4 inches around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV.

72

Lightning storms

Disconnect the TV from the power outlet and antenna before lightning storms.

During lightning storms, never touch any part of the

TV, power cord or antenna cable.

Risk of hearing damage

Avoid using earphones or headphones at high volumes or for prolonged periods of time.

Low temperatures

If the TV is transported in temperatures below 5°C or

41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.

Humidity

In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.

The condensation moisture will not harm the TV or cause malfunction.

19.2

Screen care

• Never touch, push, rub or strike the screen with any object.

• Unplug the TV before cleaning.

• Clean the TV and frame with a soft damp cloth and wipe gently. Never use substances such as alcohol, chemicals or household cleaners on the TV.

• To avoid deformations and colour fading, wipe off water drops as quickly as possible.

• Avoid stationary images as much as possible.

Stationary images are images that remain onscreen for extended periods of time. Stationary images include onscreen menus, black bars, time displays, etc. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

73

20

Terms of use, copyrights and licenses

20.1

Terms of use

2015 © TP Vision Europe B.V. All rights reserved.

This product was brought to the market by TP Vision

Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

Specifications are subject to change without notice.

Trademarks are the property of Koninklijke Philips N.V

or their respective owners. TP Vision reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website are believed to be adequate for the intended use of the system.

The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. TP Vision Europe B.V. warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

TP Vision Europe B.V. cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible. Terms of warranty Risk of injury, damage to TV or void of warranty! Never attempt to repair the

TV yourself. Use the TV and accessories only as intended by the manufacturer. The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact

Philips TV Customer Care for service or repairs. Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual, shall void the warranty. Pixel characteristics This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural

74 property of the display (within common industry standards) and is not a malfunction. CE compliance

This product is in compliance with the essential requirements and other relevant provisions of

Directives 2006/95/EC (Low Voltage), 2004/108/EC

(EMC) and 2011/65/EU (ROHS). Compliance with EMF

TP Vision Europe B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of

Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro

Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

20.2

Copyrights and licenses

HDMI

HDMI®

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

Dolby

Dolby®

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

DTS 2.0 + Digital Out ™

trademarks of Oracle and/or its affiliates, in the United

States and other countries.

Microsoft

DTS 2.0 + Digital Out™

Manufactured under license under U.S. Patent Nos:

5,956,674; 5,974,380; 6,487,535 and other U.S. and worldwide patents issued and pending. DTS, the

Symbol, and DTS and the Symbol together are registered trademarks and DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. ©

DTS, Inc. All Rights Reserved.

Skype

Skype™

© 2013 Skype and/or Microsoft. The Skype name, associated trade marks and logos and the "S" logo are trade marks of Skype or related entities.

Skype is a trademark of Skype or its related companies. Although this product has been tested and met our certification standards for audio and video quality, it is not endorsed by Skype, Skype

Communications S.a.r.l. or any of their related companies.

Windows Media

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United

States and/or other countries.

Microsoft PlayReady

Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content.

This device uses PlayReady technology to access

PlayReady-protected content and/or WMDRMprotected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies.

Content owners may require you to upgrade

PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

Wi-Fi Alliance

DLNA Certified®

Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi

CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.

© 2013 Digital Living Network Alliance. All rights reserved.

© 2013 DLNA. All rights reserved.

Java

MHEG software

The copyright in MHEG software ("the Software") comprised in this television ("this product") and included to enable you to use interactive television features is owned by S&T CLIENT SYSTEMS LIMITED

("the Owner"). You are permitted to use the Software only in conjunction with this product.

Java and all Java based trademarks are registered

75

Kensington

Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world.

Other trademarks

All other registered and unregistered trademarks are the property of their respective owners.

76

Index

A

Activity style 37

Amplifier, audio system 38

Antenna connection 4

Antenna connection, tips 5

App, rental videos 58

Apps, feedback 57

Apps, lock 57

Apps, open 57

Apps, recommended 57

Apps, search 57

Audio commentary 39

Audio description 39

Audio language 26

Audio Out - Optical 6

Audio to video sync 9

Auto subtitle shift 7

Auto volume levelling 38

Automatic channel update 27

B

Backlight contrast 34

Bass 37

Blu-ray Disc, connect 10

Brightness 35

Brightness, word mark 16

C

CAM - Conditional Access Module 7

CAM, install 7

Channel list copy 28

Channel list copy 28

Channel list, new 28

Channel lock 23

Channel update message 27

Channel, favourite 22

Channel, options 24

Channel, problems 69

Channel, status 24

Channel, switch 22

Channels, rename 23

Channels, update 27

Child lock code 23

CI+ 7

Clear sound 38

Clock 43

Colour 34

Colour, Colour enhancement 35

Colour, Colour temperature 35

Common Interface slot 7

Consumer Care 70

Contact Philips 70

Contrast 34

Contrast, Brightness 35

Contrast, Contrast modes 35

Contrast, Dynamic contrast 35

Contrast, Gamma 36

Contrast, Light sensor 36

Contrast, Video contrast 36

D

Digital Text 24

77

Disposal of TV or batteries 59

DVB (Digital Video Broadcast) 29

DVB, settings 30

DVI, connect 5

E

EasyLink 6

EasyLink, connection 5

EasyLink, settings 7

Eco settings 59

End of use 59

ESD 61

European Energy Label 59

F

Facebook 57

Favourite channel list 22

Frequency scan 30

Frequency step size 30

G

Game console, connect 10

Game or computer 37

Gamma 36

H

HbbTV 27

HDCP, copy protection 5

HDMI ARC 5

HDMI CEC 6

HDMI connection, tips 5

Headphones 12

Headphones volume 38

Hearing impaired 39

Home Theatre System, connect 8

Home Theatre System, multichannel 9

Home Theatre System, problems 10

Home Theatre System, volume leveling 9

I

Incredible surround 38

Interactive TV, about 26

Interactive TV, what you need 27

Internet memory, clear 46

I

iTV 26

L

Language, audio 26

Language, menus and messages 26

Language, original 26

Light sensor 36

Location 37

M

Manual installation 31

Media servers, supported 61

Menu language 26

Miracast, block/unblock 49

Miracast, share a screen 49

Miracast, stop sharing 49

Miracast™ 48

MPEG artefact reduction 36

Music, playback 47

N

Network frequency 30

Network frequency mode 30

Network router 44

Network, DHCP 44

Network, password 44

Network, problems 45

Network, settings 46

Network, Static IP 44

Network, wired 45

Network, wireless 44

New channels 28

Noise reduction 36

O

On and Off 16

Online support 70

Online TV 58

Open source software 62

Options, on a channel 24

Original language 26

P

Parental rating 23

Photo camera, connect 11

Photos, slideshow 47

Photos, videos and music 47

Picture style 34

Picture, backlight contrast 34

Picture, colour 34

Picture, problems 69

Picture, sharpness 34

Pixel Plus link 7

Playback formats 61

Power connection 3

Power consumption, check 59

Predefined symbol rates 30

Q

Quick picture settings 33

R

Radio channel 22

Reception quality 30

Recording, Skype calls 54

Red button 26

Rename channels 23

Rental videos 58

Repair 70

S

Safety instructions 72

SCART connection, tips 6

Screen care 73

Screen off 47

Screen off 59

Sharpness 34

Sharpness, MPEG artefact reduction 36

Sharpness, Noise reduction 36

Sharpness, super resolution 36

Shop location 37

Skype, auto sign in 55

Skype, camera zoom, pan and tilt 56

Skype, contacts 52

Skype, during recording 54

Skype, install camera 50

78

Skype, menu 51

Skype, Microsoft account 51

Skype, missed calls 54

Skype, new account 50

Skype, receiving a call 54

Skype, rental movies and Pause TV 54

Skype, sign in 50

Skype, video call 53

Skype, what you need 50

Skype™, what 50

Sleep timer 43

Smart TV, about 57

Smart TV, internet 57

Smart TV, open 57

Smart TV, overview 57

Smart TV, start page 57

Sound style 37

Sound, problems 70

Standby 16

Subtitles 25

Support, online 70

Surround mode 38

Switch off timer 43

Switching on 16

Symbol rate 30

Symbol rate mode 30

Synchronise audio and video 9

T

Teletext 24

Text 24

Treble 37

TV clock 43

TV guide 41

TV guide, clock 43

TV network name 46

TV on Demand 58

TV placement 3

TV placement 39

TV speakers 38

Twitter 57

U

Universal access 39

Universal access, audio effect 40

Universal access, hearing impaired 39

Universal access, mixed volume 40

Universal access, Speakers / Headphones 39

Universal access, speech 40

USB flash drive, connect 11

V

Video selection 24

Videos, playback 48

Viewing distance 3

Visually impaired 39

W

Watch TV 22

Wi-Fi 44

Wi-Fi Certified Miracast™ 48

Wired network 45

Wireless installation 44

Word mark, brightness 16

World Wide Web 57

WPS - PIN code 44

WPS - Wi-Fi Protected Setup 44

Y

YPbPr connection, tips 5

79

Contact information

Albania

+355 4 365 314

Armenia

+374 1 522 278

Austria/Österreich

0150 2842133

Belarus/Беларусь

+375 2 841 118 (ASTline)

+375 1 721 056 78 (CTI)

Belgium/België/Belgique

02 7007360

Bosna/Hecegovina

+38733 5356 33

Hungary/Magyarország

068 001 85 44

Republic of Ireland/Poblacht nah Éireann

01 601 11 161

Northern Ireland/Tuaisceart

Éireann

01 601 11 161

Italy/Italia

02 4528 7030

Kazakhstan/Қазақстан

+727 246 44 83 90

Latvia/Latvija

800 03 448

Bulgaria/България

0 0800 1154426

Croatia/Hrvatska

0800 222 782

Czech Republic/Česká republika

800 142100

Lithuania/Lietuva

880 030 049

Luxembourg/Luxemburg

026 843 000

Macedoni

+389 2 109 857

Denmark/Danmark

352 587 61

Netherlands/Nederlands

010 4289533

Estonia/Eesti Vabariik

800 0044 307

Norway/Norge

22 70 82 50

Finland/Suomi

09 229 019 08

Poland/Polska

022 349 1505

France

01 57324070

Portugal

0800 780 902

Georgia

+995 32 99 70 25

Romania/România

03 727 66905

Germany

0696 640 4383

Russia/Россия

(495) 961-11-11

8-800-200 08 80

Greece/Ελλάδα

0 0800 3122 1223

This information is correct at the time of print. For updated information, see www.philips.com/support.

Trademarks are the property of Koninklijke Philips N.V. or their respective owners.

2015 © TP Vision Europe B.V. All rights reserved.

www.philips.com

Serbia/Srbija

00381 114 440 841

00381 113 442 114

Slovakia/Slovensko

0800 0045 51

Slovenia

0800 80 255

Spain/España

915 909 335

Sweden/Sverige

08 6320 016

Switzerland/Schweiz/Suisse

0223 1021 16

Turkey/Türkiye

444 8 445

Ukraine/Україна

+380 44 392 8698

+38 056 232 00 45 (Comel)

+38 044 245 73 31 (Topaz)

United Kingdom

020 7949 0069

Middle East and Africa

Bahrain

Iran

Kuwait

97317700424

98218756940

4565/9654842988

Lebanon 9611684900

Morocco 022302992

Qatar 9744422221

Saudi Arabia 96626292929

Syria 96321234994

United Arab Emirates

Al Gandi 97143376600

Gulf 97125553754

No results