PMV | PMVMOUNTFB1T | manual | PMV PMVMOUNTFB1T flat panel wall mount

PMV PMVMOUNTFB1T flat panel wall mount
pmvmounts.co.uk
Mounting instructions for universal super slim ‘tilting’ TV wall bracket
VESA 100 / 200 / 300 / 400 - Universal up to 600mm X 400mm
32" to 42" (81cm to 107cm) - Up to 40Kgs
Model No.
PMVMOUNTFB1T
Factory No.
Z3242T
1
TV Fixing Kit
A - M4 x 20mm
B - M5 x 20mm
C - M6 x 20mm
D - M8 x 20mm
x4
E - M4 Washer
F - M5 Washer
G - M6 Washer
H - M8 Washer
x4
I - M5 Spacer
J - M6 Spacer
K - M8 Spacer
x4
Ÿ Read these instructions carefully before installing your equipment.
Ÿ Install the wall bracket in a suitable location using fixings which are appropriate for
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
the wall material and structure. Consult a qualified builder if you’re in any doubt as
to the structural integrity of the wall.
Do not attempt to alter or modify any part of the wall mount or its attachments.
Do not use if any parts are broken or appear to be damaged.
Tighten all bolts and fixings securely. Only use fixings provided with this bracket.
Do not mount your TV close to sources or heat or moisture.
Always have a minimum of two persons to install the wall bracket and TV.
Mount Bracket To Wall
NOTE:
Ÿ For ease of installation mount bracket on wall using position 1 and mark
other positions using a spirit level. Then remove fixing from position 1,
remove bracket and drill other positions
Ÿ Use Fixings suitable for your type of wall construction.
Ÿ Use All available fixing points
Ÿ If in any doubt of the suitability of the wall, it's construction or what type of
fixings to use, consult a qualified builder or installer.
1
Also required
2
Attach Screen Fixing
Arm To Screen
NOTE: To access fixing points it may be necessary to remove the
tilt locking arm from the TV fixing rail. First remove vertical lock
screw 'a', then remove tilt lock screw 'b'. ONLY REMOVE TV
LOCK SCREW, DO NOT REMOVE THE BOLT AND NUT FROM
THE HANGING SIDE.
a
A-K x4
3
Hang Screen On
Wall Plate
NOTE:
Hang TV centrally to wall plate.
4
Adjust Level and Tilt
NOTE:
To adjust tilt, firstly remove bolt from position 'b' if you
haven't already done so. Loosen bolt 'a' and tilt TV to
desired angle. Re-tighten bolt 'a' to secure position. DO
NOT LOOSEN OR REMOVE BOLT 'C'!
b
NOTE:
To adjust level on wall, turn thumb
wheels on TV hanging arms clockwise
or anticlockwise to move the resting
point in or out.
a
c!
b
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising