POCKET 15mm BASE

Included:

3/16 allen wrench

3mm allen wrench

(2) 1/4-20x3/8 socket cap

15mm RODS and SOCKET CAP SCREWS

2. Locate both 1/4-20 HOLES on POCKET CAGE

BOTTOM

ROD CAP HOLE with first 1/4-20 HOLE of

BOTTOM PLATE of CAGE ASSEMBLY

NOTE: POCKET CAGE assembly required. See POCKET CAGE assembly instructions

SOCKET CAP inside ROD

5. Using 3/16 allen wrench tighten SOCKET CAP and secure to POCKET CAGE

6. Repeat for second ROD

7. With both RODS attached locate BRACKET

MARKERS facing forward slide RODS into

15mm

9. Align MARKERS with top of BRACKET for proper lens height

10. Locate and tighten BRACKET SCREW with 3mm allen wrench to secure CAGE ASSEMBLY to

BASE ASSEMBLY. Ensure RODS are secure

© Wooden Camera, Inc. 2011-2013