Better

H

and Gardens

®

5683215WCOM

STOP

DO NOT RETURN PRODUCT TO THE STORE

Individual stores do not stock parts.

Date of Purchase

___ / ___ / ___

If a part is missing or damaged, visit our website or call our toll-free customer service line. We will gladly ship your replacement parts

FREE of charge.

Need Parts or Assistance?

WWW.AMERIWOOD.COM/PARTS

or call toll free:

1-800-489-3351

For prompt, reliable service please have your assembly manual ready.

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT

SAFETY INFORMATION. PLEASE

READ AND KEEP FOR FUTURE REFERENCE.

Please Recycle

Recicle Por Favor

Recommended # of people needed for assembly: 1

(however it is always better to have an extra hand.)

Estimated assembly time is 1 hour.

Spanish translations are located in the center of this manual.

Se localizan las traducciones españolas en el centro de este manual.

B345683215WCOM1

PARTS - PIEZAS

Parts shown are the base cabinet of your model. Drawer is shown on next pages. Please note, some parts are labeled with a sticker and some parts have a letter stamped on a raw edge.

.

Piezas mostradas son la base del gabinete de su modelo. Cajón se muestra en las siguientes páginas. Nota: algunas partes están marcados con una etiqueta y algunas partes tienen una letra impresa en un borde.

This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit.

Esto pedazo son la construcción del cartón. Ello no son hecho de madera, pero se requlere para la asamblea de su unidad.

Spanish parts list on page 5.

ITEM

Lista de piezas españolas en la página 5.

Parts List

QTY PART NUMBER DESCRIPTION

R

N

H

S

A

C

M

D

P

E

B

H

Q

O

A

B

C

D

E

H

I

M

N

O

P

Q

R

S

1

1

1

1

1

2

2

1

1

1

1

2

2

1

35683215010

35683215020

35683215030

35683215040

35683215050

35685215080

35685215090

35683000130

35683215140

35683215150

35683215160

35683215170

35683215180

K568321500

LEFT PANEL

RIGHT PANEL

TOP

BOTTOM

CENTER MOLDING

UPPER SIDE MOLDING

LOWER RAIL

STRINGER

LEFT PANEL RAIL

RIGHT PANEL RAIL

UPPER FRONT MOLDING

FRONT LEG

REAR LEG

BACK PANEL

I

Q

B345683215WCOM1

3 /34

?? www.ameriwood.com ??

PARTS - PIEZAS

Parts shown are for the drawer of your model. Please note, some parts are labeled with a sticker and some parts have a letter stamped on a raw edge.

Piezas mostradas son para el cajón de su modelo. Nota: algunas partes están marcados con una etiqueta y algunas partes tienen una letra impresa en un borde.

ITEM

F

G

J

K

L

QTY

1

1

1

1

1

Parts List

PART NUMBER

35683215060

35683302070

35683302100

35683302110

35683302120

DESCRIPTION

DRAWER FRONT

LEFT DRAWER SIDE

RIGHT DRAWER SIDE

DRAWER BACK

DRAWER BOTTOM

K

J

L

G F

B345683215WCOM1

4 /34

?? www.ameriwood.com ??

PARTS - PIEZAS

1 x 10

#A22570 cam lock

2 x 10

#A22510 cam bolt

3 x 16

#A22920 connector

4 x 16

#A22910 connector bolt

5 x 6

#A21660 wood dowel

6 x 14

#A12850

1" pan head

7 x 2

#A17400

8-32 x 7/8" bolt

8 x 4

#A11600

1-1/4" flat head

9 x 12

#A12120

7/16" pan head

10 x 10

#A11080

7/16" flat head

11 x 6

#A21110 nail

12 x 2

#A54200 drawer bracket

13

#A52480 knob x 1

14a left cabinet member

14

14b right cabinet member

14c left drawer runner

#A56030

14d right drawer runner x 1

5 /34

?? www.ameriwood.com ??

B345683215WCOM1

This illustration shows how the CAM fastening system works.

Esta ilustración muestra el sistema de fijación de leva y como funciona.

1 2

Tighten to fully seat. Do not over tighten.

Apriétese a totalmente asiento. No haga encima de apriétese.

Proper orientation of cam.

La orientación apropiada de leva.

3 4

½ turn to fully lock.

½ se vuelven a totalmente cerradura.

Titu s

Tit us

Lock

Apretar

Serrer

6 /34

?? www.ameriwood.com ??

B345683215WCOM1

1 Important: When using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.

Importante: Cuando se utiliza un taladro eléctrico o corriente desarmador para atornillar, tenga en cuenta a despacio y se detendrá cuando el tornillo está apretado. No hacerlo puede resultar en despojar el tornillo.

3

A

You will need to tap the connector (3) with a hammer to fully insert. Be sure the connector is positioned as shown before pushing into holes.

Quizá necesites golpear el conector (3) suavemente con un martillo para insertar conpletamente. Esté seguro que conectador está colocado como se muestra antes de empujar en los agujeros.

Finished Edge

Borde Acabado

3

B

3

3 x 12

7 /34

?? www.ameriwood.com ??

Finished Edge

Borde Acabado

3

B345683215WCOM1

2

4 x 12

4

4

4

Q

4

Q

4

4

4

4

R

4

4

R

4

4

You will use the larger holes in the rear legs (R) for the connector bolts (4). The rear legs (R) has holes in the front and rear surface.

B345683215WCOM1

8 /34

?? www.ameriwood.com ??

3 Press the front and rear legs (Q&R) onto the left panel (A) so the connector bolts (4) engage the connectors (3). Turn the screw in the center of the connector (3) clockwise to lock in place.

Small holes in rear surface.

Los agujeros pequeños en superficie posterior.

Finished Edge

Borde Acabado

R

A

Q

Turn screw clockwise to lock in place.

Gire hacia la derecha el tornillo para bloquear en su lugar.

9 /34

?? www.ameriwood.com ??

End View

Vista Final

B345683215WCOM1

4 Press the front and rear legs (Q&R) onto the right panel (B) so the connector bolts (4) engage the connectors (3). Turn the screw in the center of the connector (3) clockwise to lock in place.

Small holes in rear surface.

Los agujeros pequeños en superficie posterior.

Finished Edge

Borde Acabado

R

B

Q

Turn screw clockwise to lock in place.

Gire hacia la derecha el tornillo para bloquear en su lugar.

10 /34

?? www.ameriwood.com ??

End View

Vista Final

B345683215WCOM1

5

1 x 2

2 x 3

5 x 1

10 x 3

14a

14 x 1

1

10

R

A

14a

Q

2

5 s

Titu

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

11 /34

?? www.ameriwood.com ??

B345683215WCOM1

6

R

B

1 x 2

2 x 3

5 x 1

10 x 3

14b

14 x 1

2

Q

14b s

Titu

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

12 /34

?? www.ameriwood.com ??

5

10

1

B345683215WCOM1

7 Attach the upper side molding (H) and lower rail (I) to the left panel (A) as shown with screws (6).

H

6 x 4

Finished Edge

Borde Acabado

Q

Be sure the top edge of the upper side molding

(H) is flush with the top edge of the left panel (A).

Asegúrese de que el borde superior de la moldura lateral superior (H) está a ras con el borde superior del panel izquierdo (A).

I

R

A

H

A

I

6

Be sure the bottom edge of the lower rail (I) is flush with the bottom edge of the left panel (A).

Asegúrese de que el borde inferior del riel inferior (I) está a ras con el borde inferior del panel izquierdo (A).

B345683215WCOM1

13 /34

?? www.ameriwood.com ??

8

Attach the upper side molding (H) and lower rail (I) to the right panel (B) as shown with screws (6).

H

Finished Edge

Borde Acabado 6 x 4

Be sure the top edge of the upper side molding

(H) is flush with the top edge of the right panel (B).

Asegúrese de que el borde superior de la moldura lateral superior (H) está a ras con el borde superior del panel derecho (B).

Q

B

I

B H

I

6

Be sure the bottom edge of the lower rail (I) is flush with the bottom edge of the right panel (B).

Asegúrese de que el borde inferior del riel inferior (I) está a ras con el borde inferior del panel derecho (B).

14 /34

?? www.ameriwood.com ??

R

B345683215WCOM1

9

6 x 3

H

Position the left panel rail (N) as shown. Attach the left panel rail (N) to the left panel (A) with screws (6) as shown. If needed loosen screws, make needed adjustment of rail and re-tighten.

N

A

Q

R

15 /34

?? www.ameriwood.com ??

I

6

B345683215WCOM1

10

6

Q

6 x 3

Position the right panel rail (O) as shown.

Attach the right panel rail (O) to the right panel (B) with screws (6) as shown. If needed loosen screws, make needed adjustment of rail and re-tighten.

I

B

R

O

H

16 /34

?? www.ameriwood.com ??

B345683215WCOM1

11

2 x 4

4 x 2

4

C

2

17 /34

?? www.ameriwood.com ??

B345683215WCOM1

12

1 x 4

5 x 2

5

1

D s Titu

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

18 /34

?? www.ameriwood.com ??

5

1

B345683215WCOM1

13

1

1 x 2

3 x 2

5

M

3

5 x 2

You will need to tap the connector (3) with a hammer to fully insert. Be sure the connector is positioned as shown before pushing into holes.

Quizá necesites golpear el conector (3) suavemente con un martillo para insertar conpletamente. Esté seguro que conectador está colocado como se muestra antes de empujar en los agujeros.

19 /34

?? www.ameriwood.com ??

5 s

Titu

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

1

B345683215WCOM1

14

E

4

Turn screw clockwise to lock in place.

Gire hacia la derecha el tornillo para bloquear en su lugar.

E

M

4 x 2

End View

Vista Final

20 /34

?? www.ameriwood.com ??

B345683215WCOM1

15

3 x 2

Turn screw clockwise to lock in place.

Gire hacia la derecha el tornillo para bloquear en su lugar.

3

P

C

P

You will need to tap the connector (3) with a hammer to fully insert. Be sure the connector is positioned as shown before pushing into holes.

Quizá necesites golpear el conector (3) suavemente con un martillo para insertar conpletamente. Esté seguro que conectador está colocado como se muestra antes de empujar en los agujeros.

B345683215WCOM1

21 /34

?? www.ameriwood.com ??

16

Attach the stringer (M) and bottom (D) to left panel (A) first, then attach the right panel (B) to the stringer (M) and bottom (D).

D

A M

B

UNLOCK

DESAPRETAR

LOCK

APRETAR

22 /34

?? www.ameriwood.com ??

B345683215WCOM1

17

UNLOCK

DESAPRETAR

LOCK

APRETAR

A

C

P

B

23 /34

?? www.ameriwood.com ??

B345683215WCOM1

18

IMPORTANT!

THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.

IMPORTANTE!

EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE SER INSTALADO CORRECTAMENTE.

Carefully place unit on its front side.

9

9 x 8

S raw surface superficie cruda

Position the back panel (S) as shown. Using eight screws (9), attach as shown. DO NOT tighten the screws at this time.

B345683215WCOM1

24 /34

?? www.ameriwood.com ??

19

S

11

WARNING

Please make sure that the Backs are attached securely.

All nails must be driven into the parts straight and tightened firmly. Failure to do so could cause instability, product collapse, and/or serious injury.

AVERTISSEMENT

S’il-vous-plaît assurez-vous que les PANNEAUX

ARRIÈRES sont attachés solidement. Tous les clous doivent être enfoncés perpendiculairement et solidement dans les parties. Sinon le meuble peut devenir instable, s’effondrer subitement et/ou causer des blessures graves.

11 x 6

Assure that the unit is square.

Distance from corner to corner must be equal as shown.

Asegura que el unidad es cuadrada.

Distancia de esquina a esquina debe ser igual como se muestra por favor.

25 /34

?? www.ameriwood.com ??

Flush the edge of the back panel with the bottom edge of the bottom shelf. Align squarely and nail straight through into back edges. Now tighten the screws (9) from step

18.

Limpie el borde del panel posterior con el borde inferior del estante inferior. Alinee escuadra y clavarlas directamente a través de los cantos posteriores. Ahora apriete los tornillos (9) en el paso 18.

B345683215WCOM1

20 Lay the drawer sides down on a flat hard surface. Carefully line up the drawer bracket with the holes in the drawer side as shown. Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the drawer bracket is fully seated on the drawer side.

12 x 2

Finished Edge

Borde Acabado

G

12

12

J

Finished Edge

Borde Acabado

Bracket Orientation

Orientación del soporte

26 /34

?? www.ameriwood.com ??

Bracket Orientation

Orientación del soporte

B345683215WCOM1

21

Finished Edge

Borde Acabado

G

10

14c

10 x 4

14d

14c

14 x 1

27 /34

?? www.ameriwood.com ??

14d

J

10

B345683215WCOM1

22

9 x 4

G

F

J

9

G

9

F

B345683215WCOM1

28 /34

?? www.ameriwood.com ??

23

G

L

Finished Surface

Superficie Acabado

J

F

29 /34

?? www.ameriwood.com ??

L

J

B345683215WCOM1

24

8

G

K

J

8 x 4

30 /34

?? www.ameriwood.com ??

8

B345683215WCOM1

25

7

7 x 2

13 x 1

31 /34

?? www.ameriwood.com ??

F

13

B345683215WCOM1

26

Notice, the drawer bracket holes are slotted. Drawer front can be adjusted by loosening screws, making needed adjustments and retightening screws.

Tenga en cuenta que los orificios de soporte del cajón se ranuran. El frente del cajón se puede ajustar aflojando tornillos, haciendo los ajustes necesarios y volver a apretar los tornillos.

cabinet member corredera de mueble roller rodillo

32 /34

?? www.ameriwood.com ??

roller rodillo drawer runner deslizador de cajón

B345683215WCOM1

MAXIMUM LOADS – CARGA MAXIMA - CHARGES MAXIMALES

This unit has been designed to support the maximum loads shown.

Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury.

Esta unidad ha sido diseñada para soportar la carga máxima anotada.

El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones.

40 lbs.

18.1 kg.

15 lbs.

6.8 kg.

40 lbs.

18.1 kg.

33 /34

?? www.ameriwood.com ??

B345683215WCOM1

Certificate of Conformity

1. This certificate applies to the Ameriwood Industries Inc. product identified by this instruction manual.

2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).

3. This product is distributed by: Ameriwood Industries Inc.

410 East First Street South

Wright City, MO 63390

636-745-3351

4. Site of Manufacture:

□ Tiffin OH

5. See front page of instruction manual for date of manufacture.

B345683215WCOM1

34 /34

?? www.ameriwood.com ??