Transcend | TS0MFLRD8E | Datasheet | Transcend Internal Multi-Card Reader

Transcend Internal Multi-Card Reader
TS0MFLRD8E
USB2.0 Internal Multi-Card Reader
Description
TS0MFLRD8E is a USB2.0 Internal Multi-Card Reader
System Requirements
with 4 slots, which are for CompactFlash Type I/II,
• Desktop computer with an onboard USB pin-header and
Microdrive™, SmartMedia, Secure Digital, miniSD
(with
adapter),
MultiMediaCard™,
RS-MMC
3.5” drive bay
(with
• One of the following operating systems:
adapter), Memory Stick , Memory Stick PRO®, Memory
®
®
Stick Duo (with adaptor) and Memory Stick PRO Duo
®
®
®
®
- Win 98SE, Win 2000, Win Me, Win XP
®
- Linux kernel 2.4 or later
(with adaptor).
Features
Outline
• Front Panel: White
• Single Power Supply: 3.3V / 5V ± 10%
• Durability of Connector: 10,000 times
• Recommended Operating Temperature: 0 – 40 ℃
• Recommended Storage Temperature: -10 – 60 ℃
• Compliant with USB specification version 2.0
• Hi-Speed with transfer rate up to 480 Mbps
• Support CompactFlash™ Type I/II, IBM Microdrive,
SmartMedia Card, Secure Digital, miniSD (with
adapter), MultiMediaCard, RS-MMC (with adapter),
®
®
Memory Stick , Memory Stick PRO , Memory Stick
®
®
Duo (with adaptor) and Memory Stick PRO Duo (with
adaptor)
• LEDs indicate card insertion and data traffic
Dimensions
Transcend Information, Inc.
1
Side
Millimeters
Inches
A
102.00 ± 1.00
4.02 ± 0.04
B
102.00 ± 1.00
4.02 ± 0.04
C
26.00 ± 1.00
1.02 ± 0.04
TS0MFLRD8E
USB2.0 Internal Multi-Card Reader
Block Diagram
Pin Identification
Pinouts
Pin No.
Pin Name
01
VCC
USB-
USB differential signal:
02
USB-
USB+
The pairs are used to transmit
03
USB+
04
VSS
VSS
Ground
05
NC / SG
VCC
USB Power Input
NC / SG
Not Connect / Shield Ground
Transcend Information, Inc.
Symbol
Function
Data/Address/Command
2
TS0MFLRD8E
USB2.0 Internal Multi-Card Reader
Absolute Maximum Ratings
Symbol
Parameter
Min.
Max.
Unit
VCC
Input Voltage
2.6
5
V
Vss
Input Ground Voltage
0
0.7
V
Ta
Operating Temperature
0
+40
°C
Ts
Storage Temperature
-10
+60
°C
DC Characteristics
(Ta = 0 °C to +40 °C, Vcc = 5V, Freq = 12MHz)
Symbol
Parameter
Min.
Typ.
Max.
Unit
Test Conditions
Vs
Supply Voltage
3.0
3.3
3.6
V
--
VOH
Output High Voltage
3.0
--
--
V
--
VOL
Output High Voltage
--
--
0.2
V
--
Above technical information is based on industry standard data and tested to be reliable. However, Transcend makes no
warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this
product. Transcend reserves the right to make changes in specifications at any time without prior notice.
Transcend Information, Inc.
3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising