Superlux BES5A 5" powered studio monitor Specifications 2 Pages

Below you will find brief information for Studio Monitor BES5A BES5A. The BES5A is a compact bi-amplified active monitor speaker designed for digital or analog production. Its bass reflex system and advanced driver and enclosure design deliver high-fidelity sound at a level comparable to much larger systems. Its features include 40W of power to the LF, 30W to the HF, 5" cone woofer, 1" titanium dome high frequency drivers, frequency response from 50Hz to 22kHz, XLR balanced and 1/4" unbalanced input, TRIM controls for high and low frequencies, magnetic shielding and compact size.

advertisement

Superlux BES5A Studio Monitor Datasheet | Manualzz

BES5A

5” 2-way Active Studio Monitor

Project/ Home Studio

Near Field Monitoring

DAW workstation

Home Theaters

Specifications

Type

Crossover Frequency

Overal Frequency

Response

Maximum Output Level

Magnetic Shielding

Components LF/ HF

Enclosure Type, Meterial

Output Power LF/ HF

Signal to Noise Ratio

Input Sensitivity, VR @ center connectors

Controls

Indicators

Power Consumption

Dimension (WxHxD)

Net Weight (one speaker)

Shipping Weight

(two speakers)

Bi-amp 2-way Active Speaker

2.5 kHz, 24dB/oct

50Hz - 22kHz

101dB,1m on Axis

Yes

5"/ 1" titanium dome

Bass-Reflex, PP

40W/ 30W

>=93dB

XLR: +4dBu

1/4": -10dBu

XLR & 1/4"

Volume at the front

Power on/off at the front

TRIM for HF:

+1.5/ 0/ -1.5dB@ 15 kHz

TRIM for LF:

+1.5/ 0/ -1.5dB@ 60 Hz

Green for Power and red for clipping

60W

287 x 178 x 217 mm

11.3" x 7" x 8.5"

6.4kg (14.1 lbs)

16kg (35.2 lbs)

General Description

The Superlux BES5A is a very compact bi-amplified active monitor speaker. Its bassreflex system delivers outstanding monitoring precision for digital or analog production in stereo or surround formats, with performance comparable to much larger systems. Advanced driver and enclosure design are carefully matched with superior amplifier and electronic circuitry.

Bass response has been widened down to 50Hz while distortion is substantially lower. The BES5A’s excellent directivity characteristics and accurate imaging together with its compact size and flexible connectivity make the BES5A the perfect monitoring tool for a wide range of applications.

Features

• Integrated die-cast heat-sink and back panel ensures the ultimate efficient cooling

• Advanced bi-amplified power, 40W for LF and 30W for HF

• 5" cone woofer and 1" titanium dome high frequency drivers

• Frequency response 50Hz- 22kHz

• XLR balanced input and 1/4" unbalanced input.

• TRIM Control for High and Low

• Magnetic shielding

BES5A Part Numbers

120V WH00BES5A0100

230V WH00BES5A0101

MADE IN CHINA www.superlux.com.tw

Rear Panel a

Block Diagram e b c d f g a AC IN

This is where you connect the supplied AC linecord to provide AC power to the BES5A.

b LOW TRIM

With this low trim setting, you may give boost or cut at around

60Hz by-3dB, +1.5dB or -1.5dB.

c HIGH TRIM

With this high trim setting, you may give boost or cut at around

15kHz by +1.5dB or -1.5dB.

d INPUT 1 2

The XLR and 1/4" input jacks accept balanced or unbalanced line signal. Only one of them can be used and do not plug in both at the same time. e LEVEL

This knob will determine the overall output level.

f POWER INDICATOR

The power indicator will light green when the power is turned on. It will flash red when clipping happen.

g POWER

Switch up to turn the BES5A on and switch down to turn it off.

Make sure the level control is down before you turn it on.

Frequency Response

Performance Match

BES110A,

10” active subwoofer loudspeaker

Optional Accessories

Anti-vibration table stand model# AV-T1

Dimensions

AV-T1

178 / 7 mm / inch.

217 / 8.54

advertisement

Key Features

  • Compact bi-amplified active speaker
  • Bass reflex system
  • Advanced driver & enclosure design
  • High fidelity sound
  • 5" cone woofer
  • 1" titanium dome high frequency drivers
  • Frequency response from 50Hz to 22kHz
  • XLR balanced & 1/4" unbalanced input
  • TRIM controls for high & low frequencies
  • Magnetic shielding

Frequently Answers and Questions

What kind of input does the BES5A offer?
The BES5A offers both balanced and unbalanced input, with XLR and 1/4" connectors.
What is the maximum output level of the BES5A?
The maximum output level of the BES5A is 101dB, 1m on Axis.
What is the frequency response of the BES5A?
The frequency response of the BES5A is 50Hz - 22kHz.

Related manuals

Download PDF

advertisement