Carestream Installation Guide

Add to my manuals
44 Pages

advertisement

Carestream Installation Guide | Manualzz

DE1000-15H

CS SoftDent Practice Management Software

Installation Guide

Notice

©Carestream Health, Inc., 2015. No part of this publication may be reproduced, stored in a retrieval system, translated to another language, or transmitted in any form by any means, electronic, mechanical, photocopied, recorded, or otherwise, without prior written permission.

NEITHER CARESTREAM DENTAL NOR ITS PARENTS OR ANY OF ITS SUBSIDIARIES MAKE ANY WARRANTY

OF ANY KIND WITH RESPECT TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.

The information in this document is subject to change. Neither Carestream Dental nor its parents or any of its subsidiaries shall be liable for errors contained herein or for incidental damages in conjunction with the furnishing, performance, or use of this material.

SoftDent and MasterWorks are trademarks of Carestream Health.

All other trademarks and registered trademarks are the property of their respective holders.

Manual Name: CS SoftDent Practice Management Software Installation Guide

Part Number: DE1000

Revision Number: 15H

Print Date: June 2015

The names of persons and the data reflected in this guide are fictitious and are not intended to represent any real individual, event, or condition. Any resemblance or similarity of the names of persons or data reflected in this guide to any actual person’s name or any event or condition is purely coincidental and unintended.

Contents

Installing SoftDent Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . 1

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Using Radiographic Images . . . . . . . . . . . . . . . . . . . . 1

Mapping a Network Drive . . . . . . . . . . . . . . . . . . . . . 1

Backing Up Data . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Previewing the Updated Features . . . . . . . . . . . . . . . . . . . 2

Installing SoftDent . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installing SoftDent on the Server . . . . . . . . . . . . . . . . . 3

Installing SoftDent on a Server Running Windows 8 . . . . 3

Installing SoftDent on a Server Running Windows

Server 2012 . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing SoftDent on the Server . . . . . . . . . . . . . . . 5

Opening SoftDent and Installing the License File . . . . . . . . 6

Installing SoftDent on a Workstation . . . . . . . . . . . . . . . 9

Installing SoftDent on a Workstation Running

Windows 8 . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing from the DVD . . . . . . . . . . . . . . . . . . . . 9

Installing Across Your Network . . . . . . . . . . . . . . . 10

Installing on a Workstation Running Windows 8. . . . . . 10

Upgrading SoftDent . . . . . . . . . . . . . . . . . . . . . . . . . 12

Upgrading SoftDent on a Server . . . . . . . . . . . . . . . . 12

Upgrading SoftDent on a Workstation . . . . . . . . . . . . . 15

Automatically Upgrading the Software . . . . . . . . . . . 15

Manually Upgrading the Software . . . . . . . . . . . . . 15

Upgrading SoftDent on a Server—Maintenance Release . . . . 16

Upgrading SoftDent on a Workstation—

Maintenance Release . . . . . . . . . . . . . . . . . . . . . . 17

Automatically Upgrading the Software . . . . . . . . . . . 17

Manually Upgrading the Software . . . . . . . . . . . . . 17

Installing Support for the SoftDent Voice Activation Module . . . . 18

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) iii of iv

Installing and Activating the SoftDent KIOSK Check-In Module on a Workstation. . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing the SoftDent KIOSK Check-In Module on a Workstation . . . . . . . . . . . . . . . . . . . . . . . . 19

Activating the SoftDent KIOSK Check-In Module on a Workstation . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing the M2SYS FINGERPRINT Software . . . . . . . . . . 20

Installing Additional Databases . . . . . . . . . . . . . . . . . . . 21

Configuring the Primary Server . . . . . . . . . . . . . . . . . 21

Installing a New Database . . . . . . . . . . . . . . . . . . . 23

Installing an Existing Database . . . . . . . . . . . . . . . . . 25

Converting to SoftDent v16.2 Client/Server . . . . . . . . . . . . 28

Using the CS Software Update Service . . . . . . . . . . . . . . 29

CS Software Update Service Benefits. . . . . . . . . . . . . 29

CS Software Update Service Features . . . . . . . . . . . . 29

Configuring the CS Software Update Service. . . . . . . . . 30

Authenticating an Existing SSO Account and

Configuring the CS Software Update Service. . . . . . . . . 35

Adding Accounts . . . . . . . . . . . . . . . . . . . . . . . . 36

Removing Accounts . . . . . . . . . . . . . . . . . . . . . . 36

Updating Your Software Using the CS Software

Update Service . . . . . . . . . . . . . . . . . . . . . . . . . .37

Receiving and Viewing Alerts. . . . . . . . . . . . . . . . . . 39

iv of iv CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Installing SoftDent

SoftDent can be installed as a single-user or multi-user program. In a single-user environment, perform a server installation. In a multi-user environment, perform a server and workstation installation.

The server is the host computer on which the software is installed, and it contains software system data. A workstation is a computer that must connect to the server to access system data, and on which the software is also installed. A workstation must be mapped to the shared drive of a server computer on which the software resides.

Related Documentation

See the CS SoftDent Practice Management Software Online Help for more information.

Getting Started

Before installing SoftDent, make sure that each computer in your network meets the minimum system requirements. For more information, see the System Requirements documentation shipped with your software.

Using Radiographic Images

CAUTION: Radiographic images are not intended for diagnostic use when viewed on displays or monitors that do not meet system specifications. For more information, check the CS Imaging Software System Requirements.

Mapping a Network Drive

Share the server’s hard drive and map a drive on each workstation to the server’s drive. For information about sharing and mapping drives and folders, see the documentation and online help provided with your

Microsoft Windows operating system or contact your network service provider (NSP).

Backing Up Data

Before you install SoftDent, back up your data. For information about backing up your data, see the documentation provided by your backup media vendor.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 1 of 40

Previewing the Updated Features

To preview updates and enhancements in this version of the software, you can watch a video from the DVD.

Note: To hear the audio that accompanies the video, your computer must have a soundcard and speakers or headphones.

To view the video:

1 Verify that all other programs on the server are closed and insert the CS SoftDent DVD in the DVD drive of the server.

Tip: If the Adobe Reader software is installed on your computer, you can access the installation guide from the menu.

The SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed.

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Figure 1 SoftDent Installation Window

2 Select Preview Update Features.

3 After viewing the video, click Close.

2 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Installing SoftDent

To install SoftDent for the first time:

Install the software on the server.

Open the software on the server.

Install the software on each workstation.

Important: Before installing this software, back up data. Also, ensure that no flash drives are plugged into any USB ports.

Installing SoftDent on the Server

The server is the computer on which SoftDent data resides and on which all SoftDent files are saved.

Important: It is not recommended that you run the Microsoft Vista operating system on the SoftDent server. See the current System Requirements documentation for more information.

Installing SoftDent on a Server Running Windows 8

If you are installing on a server running Windows 8, you must download .NET Framework 3.5 before you can install SoftDent.

Important: You must have an active Internet connection to download the required software.

To install .NET Framework 3.5 on a server running Windows 8:

2

3

1 Right-click Start and select Control Panel > Programs and Features. The Uninstall or change a

program window is displayed.

Select Turn Windows features on or off. The Windows Features window is displayed.

Select .NET Framework 3.5 (includes .NET 2.0 and 3.0) and click OK. A window is displayed, stating that Windows needs files from Windows Update to finish installing the feature. Click Download files

from Windows Update.

4 When the .NET Framework 3.5 download is finished, continue with the SoftDent installation instructions. See

“Installing SoftDent on the Server” on page 5 for more information.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 3 of 40

Installing SoftDent on a Server Running Windows Server 2012

If you are installing on a server running Windows Server 2012, you must download .NET Framework 3.5 before you can install SoftDent. You must also enable the Desktop Experience feature in Windows Server

2012.

Important: You must have an active Internet connection to download the required software.

To install .NET Framework 3.5 on a server running Windows Server 2012:

1 Right-click Start and select Control Panel > Programs and Features. The Uninstall or change a

program window is displayed.

2 Select Turn Windows features on or off. The Server Manager window is displayed.

3 Select Manage > Add Roles and Features. The Before you begin window is displayed.

4 Click Next. The Installation Type window is displayed.

5 Role-based or feature-based installation is selected by default. Click Next. The Select destination

server window is displayed.

6 Select a server from the server pool is selected by default. Click Next. The Select Server Roles window is displayed.

7 Click Next. The Select features window is displayed.

8 Select .NET Framework 3.5 Features and click Next. The Confirm installation selections window is displayed.

9 Select Restart the destination server automatically if required. A prompt is displayed, asking if you want to allow automatic restarts.

10 Click Yes.

11 Click Install.

12 When the .NET Framework 3.5 download is finished, continue with the SoftDent installation instructions. See

“Installing SoftDent on the Server” on page 5 for more information.

4 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

To enable the Desktop Experience feature in Windows Server 2012:

1 Launch Server Manager Dashboard.

2 Select Add roles and features. The Add Roles and Features Wizard is displayed.

3 Click Next three times. The Features option on the left side of the window is selected.

4 Scroll down to and expand the User Interfaces and Infrastructure option, and select Desktop

Experience.

5 Click Add Features on the next window that is displayed, and then click Next. The Confirm

installation selections window is displayed.

6 Click Install.

7 Click Close. You might be prompted to reboot the server.

Installing SoftDent on the Server

To install SoftDent on the server:

1 Verify that all other programs on the server are closed and insert the CS SoftDent DVD in the DVD drive on the server. The SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed.

2

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Select Install SoftDent v16.2. The Carestream SoftDent Application Suite - InstallShield Wizard

Welcome window is displayed.

3 Click Next. The Setup Type window is displayed.

4 Select Complete. To install the application in the default directory, C:\Program Files (x86)

\Carestream\Carestream SoftDent Application Suite (64-bit machines) or C:\Program Files

\Carestream\Carestream SoftDent Application Suite (32-bit machines), click Next.

Tip: To select a different directory, click Browse, select the directory, click OK, and click

Next.

The Warning: Confirmation Required window is displayed.

5 Read the message, select the This is my server machine; please continue installing option, and click Next. A message stating that a folder will be created for DPMS files is displayed.

6 Click OK. The Ready to Install the Program window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 5 of 40

7 Click Install. The Welcome window is displayed.

8 Read the welcome message, and click Next. The Choose Destination Location window is displayed.

9 To install the application in the default directory, C:\SoftDent, click Next.

Tip: To select a different directory, click Browse, select the directory, click OK, and click

Next.

Several installation windows are displayed while files are copied to your computer. After all files have been installed, the InstallShield Wizard Complete window is displayed.

10 Select Yes, I want to restart my computer now, remove any disks from their drives, and click Finish.

Opening SoftDent and Installing the License File

After you have installed SoftDent, you must install the license file and register the software.

Note: You are prompted for a license file only if this is a new installation or if you are upgrading from version 9.8 or earlier.

To open SoftDent and install the license file:

1 Double-click the CS SoftDent Software icon on the desktop, or select Start > All Programs > CS

SoftDent > CS SoftDent. The CS Software Update Service window is displayed.

Figure 2 CS Software Update Service Window

Note: This window will not display if you have already configured the CS Software

Update Service.

6 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

2 Do one of the following:

• Complete the information on the window. See

“Using the CS Software Update Service” on page 29 for more information.

• Click Remind me again in ___, select a time frame, and click OK.

The SoftDent Login window is displayed.

Figure 3 SoftDent Login Window

3 Type your name and password and click OK. The Install License File window is displayed.

Figure 4 Install License File Window

4 Insert the license file disc in the drive. Type the name of the drive, or click the Browse button and browse to the correct drive. Click OK.

The Registration Reminder window is displayed.

Figure 5 Registration Reminder Window

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 7 of 40

5 Select Yes, I want to register now and click OK. The Registration window is displayed.

Figure 6 Registration Window

6 Obtain your registration code using one of the following methods:

• To receive your registration code on the Internet, click Automatically via the Internet, and follow the instructions.

• To receive your registration code over the telephone, select Contact support by telephone.

The Registration window is displayed.

Figure 7 Registration Window

7 After you have received a registration code, type it in the field and click OK. CS SoftDent is displayed.

The first time you access the application from a workstation, the client files on the workstation are updated to ensure that they are synchronous with the server.

8 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Installing SoftDent on a Workstation

The installation process centralizes data on the server and installs the software on each workstation. You can install the software using the DVD, or you can install it across your network.

Installing SoftDent on a Workstation Running Windows 8

If you are installing on a workstation running Windows 8, you must download .NET Framework 3.5 before you can install SoftDent.

Important: You must have an active Internet connection to download the required software.

To install .NET Framework 3.5 on a workstation running Windows 8:

1 Right-click Start and select Control Panel > Programs and Features. The Uninstall or change a

program window is displayed.

2 Select Turn Windows features on or off. The Windows Features window is displayed.

3 Select .NET Framework 3.5 (includes .NET 2.0 and 3.0) and click OK. A window is displayed, stating that Windows needs files from Windows Update to finish installing the feature. Click Download files

from Windows Update.

4 When the .NET Framework 3.5 download is finished, continue with the SoftDent installation instructions. See

“Installing from the DVD” on page 9 for more information.

Installing from the DVD

To install SoftDent on a workstation from the DVD:

1 Verify that all programs on the workstation are closed and insert the CS SoftDent DVD in the DVD drive. The SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed.

2

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Select Install SoftDent v16.2. The Carestream SoftDent Application Suite - InstallShield Wizard

Welcome window is displayed.

3 Click Next. The Ready to Install the Program window is displayed.

4 Click Install. The Welcome window is displayed.

5 Read the welcome message, and click Next. The Choose Destination Location window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 9 of 40

6 To install the application in the default directory, C:\SoftDent, click Next.

Tip: To select a different directory, click Browse, select the directory, click OK, and click

Next.

The Installing window is displayed while files are copied to your computer. The Open File - Security

Warning window is displayed.

7 Click Run. The Installing window is displayed while additional files are copied to your computer. After the additional files have been installed, the InstallShield Wizard Complete window is displayed.

8 Select Yes, I want to restart my computer now, remove any disks from their drives, and click Finish.

Installing Across Your Network

Important: Before you begin, share the server’s hard drive and map a network drive

from the workstation to the server. For more information, see “Getting Started” on page 1

.

Installing on a Workstation Running Windows 8

If you are installing on a workstation running Windows 8, you must download .NET Framework 3.5 before you can install SoftDent.

Important: You must have an active Internet connection to download the required software.

To install .NET Framework 3.5 on a workstation running Windows 8:

1 Right-click Start and select Control Panel > Programs and Features. The Uninstall or change a

program window is displayed.

2 Select Turn Windows features on or off. The Windows Features window is displayed.

3 Select .NET Framework 3.5 (includes .NET 2.0 and 3.0) and click OK. A window is displayed, stating that Windows needs files from Windows Update to finish installing the feature. Click Download files

from Windows Update.

4 When the .NET Framework 3.5 download is finished, continue with the SoftDent installation instructions. See

“Installing from the DVD” on page 9 for more information.

10 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

To install the software on a workstation across your network:

1 Verify that all programs on the workstation are closed. Using your mapped drive, navigate to

SoftDent\WSetup\WSETUPDVD on the server, and run the InstallMenu executable file. The

SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed.

2

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Select Install SoftDent v16.2. The Carestream SoftDent Application Suite - InstallShield Wizard

Welcome window is displayed.

3 Click Next. The Ready to Install the Program window is displayed.

4 Click Install. The Welcome window is displayed.

5 Read the welcome message and click Next. The Choose Destination Location window is displayed.

6 To install the application in the default directory, C:\SoftDent, click Next.

Tip: To select a different directory, click Browse, select the directory, click OK, and click

Next.

The Installing window is displayed while files are copied to your computer. The Open File - Security

Warning window is displayed.

7 Click Run. The Installing window is displayed while additional files are copied to your computer. After the additional files have been installed, the InstallShield Wizard Complete window is displayed.

8 Select Yes, I want to restart my computer now, remove any disks from their drives, and click Finish.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 11 of 40

Upgrading SoftDent

An upgrade installation updates existing files, adds new files, and removes outdated SoftDent files on the server. An upgrade installation does not overwrite existing SoftDent data.

Note: If you are upgrading from a version prior to 14.0.11, contact a Carestream support representative.

The steps involved in upgrading to SoftDent v16.2 vary, depending on the software version you are currently running. For example:

If you are running v9.8 or earlier, you must first upgrade to v12.5.8.

When you have v12.5.8 installed, you then upgrade to v14.0.11 or higher.

With v14.0.11 installed, you can install v16.2.

Contact a Carestream support representative if you are upgrading from a version prior to v14.0.11.

Important: If you are upgrading the software to a new or different server computer, call a Carestream support representative before you begin. The process for moving data and setting up the server can vary with new operating systems, and your representative can help you make a smooth transition.

To upgrade SoftDent to version 16.2:

Upgrade the software on the server.

Upgrade the software on each workstation.

Upgrading SoftDent on a Server

Important: Before installing SoftDent, back up data.

Note: These instructions are for upgrading your software with a DVD. For instructions on upgrading using the CS Software Update Service, see

“Updating Your Software Using the CS Software Update Service” on page 37

.

To upgrade SoftDent on a server:

1 Close SoftDent on the server and all other computers on the network. Verify that all other programs on the server are closed and insert the CS SoftDent DVD in the DVD drive on the server. The SoftDent

Installation window is displayed.

OR

If you are upgrading a server running Windows 7 or later, the AutoPlay window is displayed.

12 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Figure 8 SoftDent Installation Window

2 Select Install SoftDent v16.2. The Carestream Application Suite - InstallShield Wizard Welcome window is displayed.

3 Click Next. The Setup Type window is displayed.

4 Select Complete. To install the application in the default directory, C:\Program Files (x86)

\Carestream\Carestream SoftDent Application Suite (64-bit machines) or C:\Program Files

\Carestream\Carestream SoftDent Application Suite (32-bit machines), click Next.

Tip: To select a different directory, click Browse, select the directory, click OK, and click

Next.

The Warning: Confirmation Required window is displayed.

5 Read the message, select the This is my server machine; please continue installing option, and click Next. The Ready to Install the Program window is displayed.

6 Click Install. The Welcome window is displayed.

7 Click Next. The Existing Installation Found window is displayed.

8 Click Next to install the software in the existing directory. The Release Code window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 13 of 40

9 Obtain your release code using one of the following methods:

• To receive your release code on the Internet, ensure you have a valid Internet connection, click

Automatically via the Internet, and click OK. The Release Code window is displayed while the code is being generated.

Figure 9 Release Code Window

• To receive your release code over the telephone, select Contact support by telephone, click

OK, and call Carestream Customer Support. The Release Code window is displayed. Read the values in the Customer ID and Hardware ID fields to the representative. After the representative gives you the registration code, type it in the Release Code field and click OK.

Figure 10 Release Code Window

The Start Installation window is displayed.

10 Click Next. The Installing window is displayed while files are copied to your computer. After all files are installed, the Installation Complete window is displayed.

11 Click Finish. Additional Carestream Application Suite files are installed. After the additional files have been installed, the InstallShield Wizard Complete window is displayed.

12 Select Yes, I want to restart my computer now, remove any disks from their drives, and click Finish.

14 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Upgrading SoftDent on a Workstation

Note: These instructions are for upgrading your software with a DVD. For instructions on upgrading using the CS Software Update Service, see

“Updating Your Software Using the CS Software Update Service” on page 37

.

Automatically Upgrading the Software

To automatically upgrade the software on a workstation:

1 After you have upgraded the server, log in to SoftDent on the workstation. A message is displayed, stating that an update has been detected and asking if you want to install the update.

2 Click Yes. Several Open File - Security Warning windows might display.

3 Click Run on each security window. The Carestream SoftDent Application Suite - InstallShield

Wizard Welcome window is displayed.

4 Click Next. The system scans the network, and the Ready to Install the Program window is displayed.

5 Click Install. When the update is finished, the Update Complete window is displayed.

6 Select Yes, I want to restart my computer now, and click Finish.

7 Repeat these steps on each workstation in your network.

Manually Upgrading the Software

Important: Before you begin, share the server’s hard drive and map a network drive

from the workstation to the server. For more information, see “Getting Started” on page 1

.

To manually upgrade the software on a workstation:

1 Select an option:

To install the software from the DVD, verify that all programs on the workstation are closed and insert the CS SoftDent DVD in the DVD drive.

To install the software across the network, verify that all programs on the workstation are closed.

Using your mapped drive, navigate to SoftDent\WSetup\WSETUPDVD on the server, and run the InstallMenu executable file.

The SoftDent Installation window is displayed.

OR

If you are upgrading a workstation running Windows 7 or later, the AutoPlay window is displayed.

• Click Run InstallMenu.exe. The User Account Control window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 15 of 40

2

• Click Yes. The SoftDent Installation window is displayed.

Select Install SoftDent v16.2. The Carestream SoftDent Application Suite - InstallShield Wizard

Welcome window is displayed.

3 Click Next. The Installing window is displayed as the software is updated.

When the update is finished, the Update Complete window is displayed.

4 Select Yes, I want to restart my computer now, remove any disks from their drives, and click Finish.

5 Repeat these steps on each workstation in your network.

Upgrading SoftDent on a Server—Maintenance Release

Important: Before installing SoftDent, back up data.

Note: These instructions are for upgrading your software with a DVD. For instructions on upgrading using the CS Software Update Service, see

“Updating Your Software Using the CS Software Update Service” on page 37

.

To upgrade SoftDent on a server:

1 Close SoftDent on the server and all other computers on the network. Verify that all other programs on the server are closed and insert the CS SoftDent DVD in the DVD drive on the server. The SoftDent

Installation window is displayed.

OR

If you are upgrading a server running Windows 7 or later, the Autoplay window is displayed.

2

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Select Install SoftDent v16.2. The Carestream SoftDent Application Suite - InstallShield Wizard

Welcome window is displayed.

3 Click Next. A number of progress windows are displayed as the software is updated. When the upgrade is completed, the Update Complete window is displayed.

4 Click Finish.

5 Click Exit.

Important: Restart the server after upgrading the software.

16 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Upgrading SoftDent on a Workstation—Maintenance Release

Note: These instructions are for upgrading your software with a DVD. For instructions on upgrading using the CS Software Update Service, see

“Updating Your Software Using the CS Software Update Service” on page 37

.

Automatically Upgrading the Software

To automatically upgrade the software on a workstation:

1 After you have upgraded the server, log in to SoftDent on the workstation. A message is displayed, stating that an update has been detected and asking if you want to install the update.

2 Click Yes. Several Open File - Security Warning windows might display.

3 Click Run on each security window. The Carestream SoftDent Application Suite - InstallShield

Wizard Welcome window is displayed.

4 Click Next. The system scans the network, and the Ready to Install the Program window is displayed.

5 Click Install. When the update is finished, the Update Complete window is displayed.

6 Select Yes, I want to restart my computer now, and click Finish.

7 Repeat these steps on each workstation in your network.

Manually Upgrading the Software

Important: Before you begin, share the server’s hard drive and map a network drive

from the workstation to the server. For more information, see “Getting Started” on page 1

.

To manually upgrade the software on a workstation:

1 Select an option:

To install the software from the DVD, verify that all programs on the workstation are closed and insert the CS SoftDent DVD in the DVD drive.

To install the software across the network, verify that all programs on the workstation are closed. Using your mapped drive, navigate to SoftDent\WSetup\WSETUPDVD on the server, and run the InstallMenu executable file.

The SoftDent Installation window is displayed.

OR

If you are upgrading a workstation running Windows 7 or later, the Autoplay window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 17 of 40

2

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Select Install SoftDent v16.2. The Carestream SoftDent Application Suite - InstallShield Wizard

Welcome window is displayed.

3 Click Next. A number of progress windows are displayed as the software is updated. When the upgrade is completed, the Update Complete window is displayed.

4 Click Finish.

5 Click Exit.

Important: Restart the workstation after upgrading the software.

Installing Support for the SoftDent Voice Activation Module

To use the SoftDent voice activation module, you must install support software, a compatible sound card, and a microphone.

Note: Install the support software on each computer that is used to perform perio charting using voice commands.

To install the support software:

1 Verify that all programs on the workstation are closed and insert the CS SoftDent DVD in the DVD drive. The SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed. Click Run InstallMenu.exe.

The SoftDent Installation window is displayed.

2 Select Install Voice. The SAPI_51 window is displayed. After the support software is installed, the

SoftDent Installation window is displayed.

3 Click Exit.

18 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Installing and Activating the SoftDent KIOSK Check-In Module on a

Workstation

You must install and activate the KIOSK check-in module before you can use it.

Installing the SoftDent KIOSK Check-In Module on a Workstation

A dedicated KIOSK workstation must be activated from the SoftDent software on the SoftDent server. To accommodate this, you must share the KIOSK workstation’s hard drive. For more information on sharing and mapping drives and folders, see the documentation and online help provided with your Microsoft

Windows operating system.

Important: The KIOSK setup files are placed in the C:\SoftDent\KSetup directory of the SoftDent server. If you update the software via the Internet, you must share this directory so you can browse to this folder from the KIOSK workstation you are setting up. Since non-employees access KIOSK workstations, permissions for user accounts on these computers should allow access to ONLY the KSetup subdirectory, and not the main SoftDent directory above it.

Before installing the KIOSK check-in module, verify that this feature is enabled in your license file. To purchase the module or for additional information, contact your Carestream representative.

To install the KIOSK check-in module on a computer:

1 Insert the CS SoftDent DVD in the DVD drive. The SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed. Click Run InstallMenu.exe.

The SoftDent Installation window is displayed.

2 Select Install SoftDent KIOSK from the menu. The installer program is launched.

3 Follow the instructions in the installer.

Activating the SoftDent KIOSK Check-In Module on a Workstation

When the installer is finished, complete these steps from the SoftDent server:

1 Select System > Change System Settings > KIOSK Configuration Options >

Activate/Deactivate KIOSK workstations. The KIOSK Workstations window is displayed.

Figure 11 KIOSK Workstations Window

2 Click Add. The Browse for Folder window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 19 of 40

3 Browse to the workstation you want to activate, and select the folder containing the SDKIOSK.EXE file.

4 Click OK. The KIOSK workstation is displayed in the list of active workstations.

5 Click Close.

Installing the M2SYS FINGERPRINT Software

You must install the M2SYS Fingerprint software on both the server computer and the workstation computers that use it.

Important: Install the M2SYS Fingerprint software on the server first.

Before installing the M2SYS Fingerprint software, verify that this feature is enabled in your license file. To purchase the fingerprint scanner or for additional information, contact your Carestream representative.

When you install SoftDent, version 16.2, shortcut icons that enable you to install the M2SYS Fingerprint software are added to the server and workstation desktops.

To install the M2SYS Fingerprint software on the server:

1 On the server desktop, double-click the Install M2SYS Fingerprint Server shortcut. The installer program is launched.

Follow the instructions in the installer.

2

To install the M2SYS Fingerprint software on a workstation that uses the fingerprint scanner:

2

3

1 On the workstation desktop, double-click the Install M2SYS Fingerprint Client shortcut. The installer program is launched.

Follow the instructions in the installer.

When prompted, install the fingerprint scanner by plugging the scanner into an empty USB port.

20 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Installing Additional Databases

An additional database setup enables you to run multiple independent SoftDent databases across your network. Using this setup, multiple practices serving different patients and maintaining separate SoftDent licenses can set up a database for each doctor and access all databases from the server or workstations across the network.

Important: Before starting, share the SoftDent directory on the server, install version

16.2, and save a backup of the directory. For more information, see

“Getting Started” on page 1

.

The primary server is the machine on which the primary database is configured, and a secondary server is any networked computer on which the SoftDent software and database resides. After configuring the primary database, you can install additional databases on the primary server and secondary servers. An additional database is any licensed SoftDent database added to a networked computer.

Depending on practice requirements, add an empty database or install an existing SoftDent database on the additional database environment. After setting up an additional database environment, data files on all servers can be accessed from any networked SoftDent server or workstation.

Configuring the Primary Server

Important: If you installed a multi-database environment and use SoftDent, version

12.0 or earlier, contact a Carestream support representative before proceeding.

Before configuring the primary server, do the following:

Install SoftDent, version 16.2, on the server on which the primary database resides.

Share the server’s drive.

Check the server’s disk space and ensure it contains enough space to manage multiple databases.

To configure the primary server to support a multi-database environment:

1

Upgrade to SoftDent, version 16.2. See “Installing SoftDent” on page 3 .

2 Verify that all programs on the server are closed and insert the CS SoftDent DVD in the DVD drive. The

SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed.

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 21 of 40

3 Select Install Additional Database. The SoftDent - Multi-Database Setup window is displayed.

4 Read the message and click Proceed. A message is displayed, informing you the database must be configured.

5 Click OK. The SoftDent - Multi-Database Setup - Enter Database Information window is displayed.

Figure 12 SoftDent - Multi-Database Setup - Enter Database Information Window

6 Type the database name and click OK.

Note: The database name and server name are displayed in the header bar when

SoftDent is accessing the database. Example: Database_1@SDDB_1

The database name must be fifteen characters or less. The database name is displayed with the identification number in the Database drop-down list in the SoftDent Login window. A window is displayed as the data files are extracted.

7 After the files are extracted, click Close.

8 To add a new database, see

“Installing a New Database” on page 23

.

To set up an existing database, see “Installing an Existing Database” on page 25

.

22 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Installing a New Database

After configuring the primary server, you can install a new database on any networked computer. If you install the database on any computer other than the primary server, that computer is configured as a secondary server. New databases configured to support an additional database environment can be accessed from any networked SoftDent server or workstation.

Important: Before starting, install version 16.2 and save a backup of the directory. For

more information, see “Getting Started” on page 1

.

Before installing a new database, do the following:

Configure the primary server. For more information, see “Configuring the Primary Server” on page 21 .

Contact a Carestream sales representative to purchase a license file for the new database. Each database requires a separate license file.

To install a new database:

1 Right-click the PracticeWorks Server icon located in the system tray of the computer on which the database is to reside and select Open PracticeWorks Server. The PracticeWorks Server window is displayed.

2 Click License Files.

3 Click Install License File. The Install License File window is displayed.

4 Insert the license file disc in the drive. Type the name of the drive in the field, or click the Browse button and browse to the correct drive. Click OK. The license file is installed, and the window is closed.

5 Verify that all programs on the server are closed and insert the CS SoftDent DVD in the DVD drive. The

SoftDent Installation window is displayed.

6 Select Install Additional Database. The SoftDent - Multi-Database Setup window is displayed.

7 Read the message and click Proceed. The SoftDent - Multi-Database Setup window is displayed.

Figure 13 SoftDent - Multi-Database Setup Window

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 23 of 40

8 Select Create a new, empty database as my additional database and click Proceed. The SoftDent

- Multi-Database Setup - Enter Database Information window is displayed.

Figure 14 SoftDent - Multi-Database Setup - Enter Database Information Window

9 Type the database name. The database name must be fifteen characters or less. The database name is displayed with the identification number in the Database drop-down list in the SoftDent Login window.

Note: The database name and server name are displayed in the header bar when

SoftDent is accessing the database. Example: Database_1@SDDB_1

10 Click Browse to select the license file. The Licensing Settings window is displayed. Select the file from the License drop-down list. The SoftDent - Multi-Database Setup - Enter Database

Information window is displayed, and the license file identification number is displayed.

11 Click OK. The Installing window is displayed while the default data is copied to the database. After the files are copied, the window is closed.

12 Select Start > All Programs > CS SoftDent > CS SoftDent. The SoftDent Login window is displayed.

Figure 15 SoftDent Login Window

24 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

13 Type DOCTOR in the Name and Password fields, select the new database, and click OK. SoftDent is displayed. The Registration Reminder window is displayed.

14 Select Yes, I want to register now and click OK. The Registration window is displayed.

15 Obtain your registration code using one of the following methods:

To receive your registration code over the telephone, call a Carestream support representative.

To receive your registration code on the Internet, click Automatically via the Internet and follow the instructions.

16 After you receive a registration code, type it in the field and click OK. SoftDent is displayed.

Installing an Existing Database

You can install an existing SoftDent database on any networked computer. If you install the database on a computer other than the primary server, that computer is configured as a secondary server. An existing database configured to support an additional database environment can be accessed from any networked

SoftDent server or workstation.

Important: Before installing this software, back up data.

Before installing an existing database, do the following:

Configure the primary server. For more information, see “Configuring the Primary Server” on page 21 .

Upgrade the server to SoftDent, version 16.2. For more information, see

“Installing SoftDent on the Server” on page 3

.

Ensure each database or server containing SoftDent data files has a separate license file.

Share the primary server’s drive and map the secondary server to the shared drive.

To set up a database on a secondary server:

1 To update the registry, select Start > All Programs > CS SoftDent > CS SoftDent.

2 Close SoftDent on the primary server and all other computers on the network.

3 Verify that all programs on the secondary server are closed and insert the CS SoftDent DVD in the

DVD drive on the server. The SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed. Click Run InstallMenu.exe.

The SoftDent Installation window is displayed.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 25 of 40

4 Select Install Additional Database. The SoftDent - Multi-Database Setup window is displayed.

5 Read the message; ensure the SoftDent directory on the primary server is shared, a drive on the secondary server is mapped to the primary server’s shared drive, a backup of your data is saved, and a license for the additional database is installed; click Proceed. The SoftDent - Multi-Database Setup -

Create or Setup window is displayed.

6 Select Set up an additional database from an existing SoftDent database and click Proceed. The

SoftDent - Multi-Database Setup - Enter Database Information window is displayed.

7 Type the database name. The database name must be fifteen characters or less.

Note: The database name and server name are displayed in the header bar when

SoftDent is accessing the database. Example: Database_1@SDDB_1

8 To select the database’s license file, click Browse next to the License File ID field. The Licensing

Settings window is displayed. Select the file from the License drop-down list. The SoftDent -

Multi-Database Setup - Enter Database Information window is displayed.

9 To select the database, click Browse next to the Existing Database field. The Browse for Folder window is displayed. Navigate to and select the directory and click OK. The SoftDent -

Multi-Database Setup - Enter Database Information window is displayed.

10 To delete existing data files after they are copied to the primary server, select Remove Existing Data

Files.

CAUTION: Back up data before selecting Remove Existing Data Files. If this option is selected, the data files are deleted after being copied to the primary server and cannot be accessed.

11 Click OK. The Installing window is displayed while the default data is copied to the server.

Note: To configure additional databases, repeat steps

4 through 11

.

26 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

12 Select Start > All Programs > CS SoftDent > CS SoftDent. The SoftDent Login window is displayed.

13 Type your user name and password, select a database, and click OK. The Registration Reminder window is displayed.

14 Select Yes, I want to register now and click OK. The Registration window is displayed.

15 Obtain your registration code using one of the following methods:

To receive your registration code over the telephone, call a Carestream support representative.

To receive your registration code on the Internet, click Automatically via the Internet and follow the instructions.

16 After you receive a registration code, type it in the field and click OK. SoftDent is displayed.

Note: The first time you access the software from a workstation, client files are updated to ensure the workstation is synchronous with the server.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 27 of 40

Converting to SoftDent v16.2 Client/Server

Important: If you want to convert to the Client/Server version of SoftDent, you must purchase a license for the FairCom Server. If you do not have a license for the FairCom

Server, your system will not run.

To convert to SoftDent v16.2 Client/Server:

1 Verify that all programs on the server are closed and insert the CS SoftDent DVD in the DVD drive. The

SoftDent Installation window is displayed.

OR

If you are running Windows 7 or later, the AutoPlay window is displayed.

2

Click Run InstallMenu.exe. The User Account Control window is displayed.

Click Yes. The SoftDent Installation window is displayed.

Select Convert to SoftDent v16.2, FairCom (tm). The Client Server Installation Confirmation window is displayed.

Figure 16 Client Server Installation Confirmation Window

Tip: You might want to click View Client Server Installation Guide and print the guide for reference.

3 Select I have recently purchased a Faircom license and am ready to install CS SoftDent

Client/Server, and click Continue Installing Client Server.

4 Follow the on-screen instructions.

28 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Using the CS Software Update Service

The CS Software Update Service (SUS) notifies you that a Carestream software update is available and enables you to view, schedule, and start the installation of the updates.

CS Software Update Service Benefits

The SUS provides the following benefits:

Updates give you the latest features.

Updates are fast and efficient; no more disks lost in the mail.

Updates are delivered automatically to your desktop.

Updates are securely downloaded and verified.

You have no disks to file or lose.

You have no disk issues to resolve; for example, disks that cannot be read.

You can schedule updates during non-working hours.

CS Software Update Service Features

Features of the SUS include:

The service provides additional information about each update; you decide if and when to update.

The service works behind the scenes and does not disrupt your workflow.

The service uses the same technology as Microsoft to deliver updates.

The service alerts you if there are issues.

The service utilizes a simple registration procedure that uses the same account details as other

Carestream Dental services.

The service collects only the information necessary to operate the service (email address, account number, Carestream Dental software versions installed, and a number assigned to your site and each PC).

You receive no additional or intrusive marketing information.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 29 of 40

Configuring the CS Software Update Service

The update software is installed when you install the latest version of SoftDent. After configuring the service, you will receive notifications when updates are available.

Note: You need to configure the service only once, and it can be done on any machine, including the server.

Tip: Have your account ID/CustomerID number handy, as you will be asked for this information during the configuration process. If you don't know your account ID/

CustomerID number, before you start the configuration process, launch SoftDent (on another machine, if necessary). From the Help menu, click About SoftDent. Click

Show License Details. Locate the CustomerID number.

To configure the CS Software Update Service:

1 Do one of the following:

• After installing the latest version of CS SoftDent, double-click the CS SoftDent icon on your desktop.

Note: If you have already set up the update service, the SoftDent Login window is displayed.

• Right-click the CS triangle logo and select Configure Update Service.

Note: If you have already set up the update service, the CS Software Update Service

— Configure the Software Update Service window is displayed.

• Double-click the orange triangle in your system tray.

30 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

The CS Software Update Service — Start Using the CS Software Update Service (SUS) window is displayed.

Figure 17 CS Software Update Service — Start Using the CS Software Update Service (SUS)

Window

2 If you have a Carestream single-sign-on (SSO) account, type your email address and password, and click OK. The CS Software Update Service — Account Details Accepted window is displayed.

Tip: Not sure if you have a single-sign-on account?

— You might have created an SSO account for the Customer Portal.

— A MasterWorks representative might have created an SSO account for you, in which case you would use your email address and the password mwonline (unless you changed your password).

— Your email address is always the login for your SSO account.

Note: If your single-sign-on-account email address has not been verified, you will receive an email and be instructed to verify the email address and activate your account.

Note: If you do not know your password and must reset it, the password is changed for other services accessed with that SSO.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 31 of 40

3 Click OK.

OR

If you do not have a single-sign-on account:

• Select I need to create a Single-Sign-On account and click OK. The CS Software Update

Service — Create Carestream Single-Sign-On Account message is displayed.

Figure 18 CS Software Update Service — Create Carestream Single-Sign-On Account

Message

• Read the message and click OK. The Single-Sign-On web page is displayed.

Figure 19 Single-Sign-On Web Page Window

In the Register section of the web page, type your email address and a password, and re-enter the information to confirm it. Click Register. The Account Information window is displayed.

32 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Figure 20 Account Information Window

• Select your region from the drop-down list and type your account ID (CustomerID) and zip code and click OK. A message is displayed, stating that an email has been sent to you, and you must click a link in the email to activate your account.

Tip: To find your account ID/CustomerID number, launch SoftDent. From the Help menu, click About SoftDent. Click Show License Details. Locate the CustomerID number.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 33 of 40

• After you have clicked the link on the email verification page, close your web browser and return to the CS Software Update Service — Start Using the CS Software Update Service (SUS) window.

Figure 21 CS Software Update Service — Start Using the CS Software Update Service

(SUS) Window

Type your email address and password, and click OK. The CS Software Update Service —

Account Details Accepted window is displayed.

Click OK.

34 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Authenticating an Existing SSO Account and Configuring the CS Software Update

Service

To get the full benefit of the CS Software Update Service, your SSO account must be authenticated and associated with your account number/CustomerID. If you created an SSO account for a service that does not require an account number or if you did not know your account ID at the time you created your SSO account, your SSO account is not authenticated.

Important: You will receive only critical updates to your software until you authenticate your SSO account.

To authenticate an existing SSO account and configure the SUS:

1 Right-click the CS triangle logo and select Configure Update Service. The CS Software Update

Service — Configure the Software Update Service window is displayed. Note the [Authenticate] notation in the Account No. section.

Note: If you have multiple accounts, select an account from the list.

Figure 22 CS Software Update Service — Configure the Software Update Service Window

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 35 of 40

2 Click Authenticate Account. The CS Software Update Service — Authenticate Account window is displayed.

Figure 23 CS Software Update Service — Authenticate Account Window

3 Type your account number/CustomerID and your zip code, and click Authenticate. The CS Software

Update Service — Account Details Accepted window is displayed.

4 Click OK.

Adding Accounts

To add an account to the CS Software Update Service:

1 Right-click the CS triangle logo and select Configure Update Service. The CS Software Update

Service — Configure the Software Update Service window is displayed.

2 Click Add Account. The CS Software Update Service — Carestream Single-Sign-On window is displayed.

3 Type the email address and password, and click Sign In.

4 Click OK.

Removing Accounts

To remove an account from the CS Software Update Service:

1 Right-click the CS triangle logo and select Configure Update Service. The CS Software Update

Service — Configure the Software Update Service window is displayed.

2 Select an account from the list and click Remove Account.

3 Click OK.

Note: If you remove all accounts from the list, online updates are disabled.

36 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Updating Your Software Using the CS Software Update Service

All workstations are notified about an update, but you must first install the update on the server using the procedure below. Once you update the server, you are prompted to update the workstations when you start SoftDent.

Tip: You can manually check for updates at any time. Right-click the CS triangle logo and select Check for Updates.

Note: You must restart your computer after an update. You might be prompted to shut down your computer before the update can take place.

To update SoftDent:

1 Do one of the following:

• Click the updates message.

• Right-click the CS triangle logo in the system tray, and select View Updates.

• Click the click here link if an update is available when you open SoftDent.

Figure 24 Update Is Available Window

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 37 of 40

The CS Software Update Service — Carestream Software Updates window is displayed.

Figure 25 CS Software Update Service — Carestream Software Updates Window

2 Select the update you want to install, click Install, and follow the prompts.

OR

• Click Schedule. The CS Software Update Service — Schedule Update Installation window is displayed.

Figure 26 CS Software Update Service — Schedule Update Installation Window

• Select a day and time for the update installation, and click OK.

Note: When you schedule an update, the SUS attempts to update all machines that are running.

38 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

Receiving and Viewing Alerts

You might receive an SUS alert containing information about the service; for example, a message about low disk space or a server connection issue.

To view alerts:

1 Do one of the following:

• Click the alerts message.

• Right-click the CS triangle logo in the system tray, and select View Alerts.

The Carestream Alerts window is displayed.

Figure 27 Carestream Alerts Window

2 Read the alert and click Close.

CS SoftDent Practice Management Software Installation Guide (DE1000-15H) 39 of 40

40 of 40 CS SoftDent Practice Management Software Installation Guide (DE1000-15H)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents