Lenco DVP-1022

Lenco DVP-1022
ENGLISH
PORTABLE DVD PLAYER
OWNER`S MANUAL
MODEL NO :DVP-1022
RE
VE RS
AL
P/N
MO
DE
DO
WN
UP
MPEG4
UNIVERSAL SERIAL BUS
SD/MMC/MS
CARD
Please read this manual before operating
Table of Contents
Table of Contents.......................................................................................................................................................................1
Safety Information......................................................................................................................................................................2
Remote Control..........................................................................................................................................................................3
Description................................................................................................................................................................................4
Using the Remote Control...........................................................................................................................................................5
Connecting Earphones to the DVD Player.....................................................................................................................................6
Connecting to an External Component .........................................................................................................................................7
Connecting to a TV......................................................................................................................................................................8
Connecting to a Stereo Component..............................................................................................................................................9
Using Card Reader....................................................................................................................................................................10
Using USB Port.........................................................................................................................................................................11
Using the AC Adaptor................................................................................................................................................................12
Using the Battery Pack..............................................................................................................................................................13
Cautions in Using Battery Pack..................................................................................................................................................14
Installing Carrying Bag/Car Harness Kit(Optional Accessory).......................................................................................................15
Playing a Disc......................................................................................................................................................................16-20
Playing MP3 and Regular Audio CD............................................................................................................................................21
Playing Picture CD...................................................................................................................................................................22
Setting TV system, Screen Saver, TV type (4:3/16:9), Password, Rating, Default.......................................................................23-24
Setting Language for OSD, Voice, Subtitle, Menu........................................................................................................................25
Setting Audio output.................................................................................................................................................................26
Setting Video's Brightness, Contrast, Hue, Saturation.................................................................................................................27
Adjusting LCD Screen...............................................................................................................................................................28
Troubleshooting..................................................................................................................................................................29-30
Specifications..........................................................................................................................................................................31
5
1
Safety Information
Please read all of the safety and operating instructions before operating this Player, follow all warnings placed on the Player
and in the user's manual. These safety and operating instructions should be retained for future reference.
Safety Information
Do not expose the system to excessive moisture, rain, sand, or heat sources.
Place the DVD Player on a firm, flat surface.
Keep the DVD Player away from domestic heating equipment and direct sunlight.
When placing the DVD Player in a cabinet, allow about one inch of space all around the DVD Player for ventilation.
SAFETY WARNING
CLASS 1 LASER PRODUCT / KLASSE 1 LASER PRODUKT / LUOKAN 1 LASER LAITE / KLASS 1 LASER APPARAT / PRODUCTO
LASER CLASE.
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
WARNING
1.To prevent fire or electrical shock, do not expose this Player to rain or moisture.
2.To avoid electrical shock, do not open the cabinet, no user-serviceable parts inside, refer servicing to qualified personnel only.
3.Certain countries may regulate the disposal of the battery used to power this product. Please consult with your local authority.
4.Listening with earphones for many hours at maximum volume may damage your hearing.
5.The Player should be connected to a power supply only of the type described in the operating instructions or as marked on the Player.
52
Remote Control
Remote Control
STANDBY
MENU/PBC
1
14
DISPLAY
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
15
16
2
17
3
4
18
5
1
2
3
4
5
6
7
8
9
0
10+
6
7
SLOW
19
8
ENTER
SETUP
20
9
21
22
23
10
REPEAT
MARK
GOTO
24
25
ZOOM
11
12
REMOTE CONTROL
13
1.MENU/PBC Button
Brings up the disc menu.
2.L/R Button
Selects left, right and stereo
sound tracks.
3.P/N Button
Selects PAL/NTSC TV systems.
4.TITLE Button
5.SUBTITLE Button
Selects the subtitle's language.
6.Number Buttons (0,1,...,9)
7.10+ Button
Uses to input 10 to 999 (combining this
button and other digit number buttons).
8. ENTER/DIRECTION Buttons
9.SETUP Button
Brings up the setup MENU
to set up the system's
language, audio, display,
password etc.
10.SKIP FORWARD (
)Button
Use to skip to next title, chapter or track.
11.SKIP BACKWARD (
) Button
Use to skip to previous title,
chapter or track.
12.ZOOM Button
13.GOTO Button
Use to enter the specific chapter, track
or time to playback.
14.STANDBY Button
Toggles between putting the Player on
standby and power on.
15.DISPLAY Button
Displays the current disc playback
information.
16.MUTE Button
17.ANGLE Button
Use to access various
camera angles on a DVD.
18.LANGUAGE Button
Selects the voice language in a DVD.
19.SLOW Button
20.PLAY/PAUSE (
)Button
Press once to start play,
press again to pause.
21.STOP Button
Stops disc play.
22.FAST REVERSE ( ) Button
23.FAST FORWARD ( ) Button
24.REPEAT Button
Allows you to repeat play
a title, chapter, track, or disc.
25.MARK Button
Use to mark a point where the playback
starts each time when the MARK button
is pressed later on.
5
3
Description
Right View
Front View
1
2
4
OP
EN
3
6
7
4
2
3
8
5
9
1.LCD
2.(16:9/4:3)(REVERSE)/(MODE)/
(DOWN) /(UP)
3.OPEN
4.DISC COVER
5. PLAYBACK BUTTONS
PLAY/POWER ON(
FAST REVERSE(
5
6
7
8
9
10
1
)
)
FAST FORWARD(
)
PAUSE /STEP( / )
STOP/POWER OFF( )
6.LCD on/off switch
7.CURSOR(UP/DOWN/LEFT/ RIGHT),
ENTER(
)
8.MENU/PBC
9.DISPLAY
1.OPEN
2. EARPHONE / SPEAKER VOLUME
3. EARPHONE JACK
4.DC IN 12V
5.POWER ON/OFF
6.INPUT / OUTPUT
7.VIDEO
8.AUDIO OUT
9.AUDIO IN
10.SPDIF: Digital audio signal
output jack
Bottom View
Left View
1
4
3
2
1
2
EN
OP
3
1.LED LIGHT/REMOTE
CONTROL SENSOR
2.3-in-1 card slot
3.LED LIGHT
4.USB slot
54
1.RELEASE LATCH (Battery
pack separation switch)
2.BATTERY PACK
3.SPEAKER
Using the Remote Control
Installing the battery
Using the remote control
Point the remote control directly at the remote sensor
on the front of the DVD Player.
1. Press the locking tab in the arrow direction.
(1)
(2)
4
8
3
TU
K
AR
M
AT
PE
3. Insert a 3V lithium battery into the
tray with the polarity ( + ) facing up
as marked.
(4)
R
RE
(3)
M EM
OD O
EL TE
No C
.:R O N
M TR
C- O
22 L
0
GO
TO
SL
O
W
ZO
9
OM
EN
5
0
TE
R
SE
1
6
P
10
2
7
AN
G
+
LE
DI
LA
SP
NG
LA
UA
Y
G
E
M
SU
UT
BT
E
IT
LE
ST
AN
D
BY
P/
TI
N
TL
E
L/
M
R
EN
U
/P
BC
2. Pull out the battery tray.
Remote Control Sensor
4. Replace the battery tray by pushing it
until it clicks into place.
5
Connecting Earphones to the DVD Player
You can attach an earphone with a stereo mini-jack plug to the phone jack (
) for private listening. Its volume is adjustable
using the VOLUME control dial. You can also connect a second earphone to the AUDIO OUT jack, but its volume cannot be
adjusted.
Note: When the earphone is connected to the Phone Jack (
), the speaker will be disconnected.
Notes on DSP
The DSP decodes the digital audio signal into stereo dts or Dolby digital audio signal for speaker and earphone playback after
converting the signal to analog and amplifying it.
The 5.1 digital signal passes through without decoding and can be accessed by the SPDIF jack on the Player.
56
Connecting to an External Component
You can enjoy video from VCR or camcorder on your DVD player.
1. Turn off DVD player, VCR and other components.
2. Connect the audio and video cables as illustrated below.
3. Slide INPUT/OUTPUT to INPUT.
4.Turn on power.
VCR or other component equipped with external output connectors
AUDIO
OUT
R
AV adaptor cable (provided)
(Mini-jack to RCA)
VIDEO
OUT
L
Video in: Yellow
Video out: Yellow
O
PE
N
Video(yellow)
Audio(left):White
Audio(right):Red
Audio (black)
Audio(left):White
AV CABLE (Not provided)
Audio(right):Red
5
7
Connecting to a TV
You can enjoy DVD quality video on TV screen.
1. Turn off DVD player, VCR and other components.
2. Connect the audio and video cables as illustrated below.
3. Slide INPUT/OUTPUT to OUTPUT.
4.Turn on power.
5.Repeatedly press TV/Video button on your TV to select the input from the DVD player.
Connect to a TV equipped with external connection jacks
AUDIO
IN
R
AV adaptor cable (provided)
(Mini-jack to RCA)
VIDEO
IN
L
Video out: Yellow
Video in: Yellow
O
PE
N
Video(yellow)
Audio(left):White
Audio(right):Red
Audio (black)
Audio(left):White
Audio(right):Red
TIPS
If you wish to view video on your TV only, close the display panel of your Player.
With the display panel shut, use the remote to control the Player.
58
AV CABLE (Not provided)
Connecting to a Stereo Component
By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory)
to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow
these steps for making the connection.
1.Turn off both DVD player and your stereo system.
2.Connect the SPDIF to your stereo system as illustrated below.
3.Slide INPUT/OUTP to OUPUT.
4.Turn on power of DVD player.
Coaxial terminal connecting stereo system
COAXIAL
O
PE
N
Coaxial cable
SPDIF(black)
Coaxial cable
COAXIAL(black)
Depending on your amplifier system, you need to make the following selection from MENU:
1.Refer to Changing Audio Output on page 26.
2.Select SPDIF/RAW if your amplifier has 5.1-channel decoder.
3.Select SPDIF/PCM if your amplifier has 2 channels.
4.Select OFF, if there is no digital signal output from the DVD player.
5
9
Using Card Reader
The player has a 3-in-1 card reader, accepting MMC(Multimedia card), SD (Secure digital card) and MS (Memory stick).
Inserting a memory card
1.Make sure that no disc is placed on the Player.
2.Insert the card into the slot with the gold contacts facing down. Gently push the card in all
the way until the card is fixed in place.
WARNING: Be careful not to insert the card in the wrong direction, or it is forced in, the card
may be damaged, or data on the card may be lost or corrupted. If the player is
not recognizing the card, or if it does not fit correctly, re-orientate the card and
try reinserting it.
Removing a memory card
You can remove the card anytime even it is playing. To remove a card, grasp the end of the
card and remove the card from the slot.
Card slot
Playing memory memory card
1.Insert the card and the screen will display the MP3 playback (default). Use direction key
(
and
) to select the file and press ENTER to play.
2.To access other file format, such as JPEG and DivX, press or twice to move the cursor
to the “Media Selection” at the lower right of the screen and press ENTER to make the
selection.
3.Press to move the cursor to the file-list and use
to select file to play.
[MP3_01]TRACK01.MP3
01.MP3_01
02.MP3_02
03.MP3_03
04.MP3_04
05.MP3_05
001.TRACK01
002.TRACK02
003.TRACK03
004.TRACK04
005.TRACK05
006.TRACK06
007.TRACK07
008.TRACK08
009.TRACK09
010.TRACK10
Media Selection
5
10
Using USB Port
The player accepts most USB devices such as MP3, DSC, USB- drive, Digital Camcorder etc. The USB in this player is version 2.0.
O
PE
N
USB slot
Pluging a USB device
1.Remove the disc from the player.
2.Plug in the USB device to the USB port on the player.
Removing a USB device
You can remove the USB device anytime even it is playing. To remove the USB device, simply grasp the end of the USB and remove it
from the slot.
Playing a USB device
1.Insert the USB device and the screen will display the MP3 playback (default). Use direction key (
and
) to select the file and
press ENTER to play.
2.To access other file format, such as JPEG and DivX, press or
twice to move the curser to the “Media Selection” at the lower right
of the screen and press ENTER to make the selection.
3.Press to move the cursor to the file list and use
to select file to play.
5
11
Using the AC Adaptor
This portable DVD player can be powered by AC through the supplied switching power AC adaptor. It can also use the
supplied battery pack to power.
When the AC adaptor is connected to the unit and powered, the unit will be automatically powered by the AC power.
AC adaptor
Power cord
O
PE
N
To home power outlet
To DC12V IN on the DVD player
Important !
Always turn off the DVD Player before connecting or disconnecting the AC cord.
Only use the AC adaptor supplied with this Player. Using a different type of adaptor may cause malfunction or damage to the product.
When the AC adaptor is used for prolonged period of time, the adaptor may heat up, this is normal and is not a cause for concern.
When not using the adaptor, unplug it from the outlet.
5
12
Using the Battery Pack
Installing the battery pack
Removing the battery pack
<1>.Align and insert the battery <2>.Slide the battery pack to the
pack into the corresponding
left until it clicks into place.
slots on the back of the unit.
<1>.Slide down the latch.
<2>.Slide the battery pack to the
right, and remove.
Charging the battery pack
1. Attach the battery pack to the Player.
2. Use the AC adapter to charge the battery pack. Make the connection as illustrated below.
3.Slide POWER to ON. ( The Player must be turned on to charge the battery).
AC adaptor
Power cord
OP
EN
To home power outlet
To DC12V IN on the DVD player
LED Indicator
During charging, the red and green LEDs blink alternatively.
When the battery is fully charged, the orange LED stays lit .
When the Player uses battery for power, steady red LED lights.
If the battery power is low, the red LED blinks.
LED INDICATOR
OPEN
5
13
Cautions in Using Battery Pack
Danger!
Strictly follow these safety information when using the battery pack, otherwise, a short circuit, overheating, smoke, fire,
or damage to the product may result.
Never disassemble or modify the battery pack in any way. Do not touch the terminal of the battery pack with a metal object.
Do not place the battery pack in direct sunlight, dashboard of a vehicle, or high temperature place. It can cause explosion or fire.
Do not expose the battery pack to water, fire, or heat.
Always use the included AC adaptor when charging the battery pack.
This battery pack is designed exclusively for your portable DVD player. Do not use it with other devices.
Warning!
1. Do not drop or subject to strong vibration.
2. Keep out of reach of children.
3. The battery pack may leak fluid that is harmful to your eyes.
If this fluid gets in your eyes, wash eyes immediately with large amounts of running water and get medical attention immediately.
If the fluid gets on your skin or clothing, wash immediately with water.
Caution!
1. When not using the battery pack, remove it and store in a cool place.
2. Keep the battery pack free from smoke, steam, moisture, and dust.
3. Using the battery pack under 0 C (32 F) or over 40 C(104 F) can cause reduced battery life.
x
5
14
Installing Carrying Bag/Car Harness Kit(Optional Accessory)
You can install the Carry case/Car Harness kit to a car seat to enjoy the movie in the car. Following these steps.
1.Unzip and open the bag.
2.Fold the top and bottom covers
backwards.
3.Zip close the bag; you have to
reverse the flap to zip the bag
close.
4.Case A: Without battery
Open the Player and slide it under
the elastic strap and place the
Player inside the bag.
DC IN 12V
1
2
5.Case A: Without battery
1 Fold the LCD panel to upright
position and pull the elastic bag
over the back of the Player.
2 Place the elastic strap over
the player.
6.Case B: With battery
Fold down the LCD panel and
tug the battery end into the net
bag.
7.Case B: With battery
Open the Player and place the
elastic strap over the player.
8.Attach the bag to the car seat by the
two straps. Adjust the screen angle
for a comfortable vidwing. Press the
REVERSE button to flip the video
180 degrees. If no battery installed,
connect the DV car adaptor to the
Player through the side opening.
5
15
Playing a Disc
Turning ON /OFF the player
To Turn On The Player
1.Slide POWER on the Player to ON, this will put the Player on standby mode.
2.Press
on the Player to turn on the power.
3.You can also press STANDBY on the remote control to turn on the power.
To put the Player on standby mode
Press STANDBY on the remote control.
To Turn Off The Power
Slide POWER on the Player to OFF.
Preparation for Playback
1.Make sure the unit has the power either from the battery pack or the AC adaptor.
2.Loading a disc, following these steps:
Open the top cover by pushing the latch to the right and lift the top cover.
Press the OPEN button to open the disc compartment cover.
Place a disc into the tray with the label side facing up.
Close the disc cover.
3.Slide INPUT/OUTPUT to OUTPUT (located on the side of the player).
4.Turn on the Power
Slide POWER to ON.
Press STANDBY on the remote control to turn on the Player. You can also press PLAY (
PLAY/PAUSE
Press
on the Player or PLAY/ PAUSE (
STOP
Press
5
16
once to stop playback.
) on the remote control to start play.
) on the Player to turn on.
Playing a Disc
Resume
This Player provides a unique resume function for making viewing movie more convenient. Follow these steps
1.When you want to interrupt the playback and come back later to play where you interrupted it, you can press OPEN on the Player to
open the disc compartment cover.
2.You can now turn off the power, put it on standby, or even remove the disc from the Player, and when you play the same disc next
time, the disc will play from where it was interrupted.
Skip
You can skip chapters on DVD-Video, tracks on CDs, and Video CDs.
1.To skip forward, press
during play or while paused; it skips to the next chapter or track. Each press increases the numbers of skips.
2.To skip to previous chapter or track, press
.
Fast Forward and Reverse
1.During playback, to fast forward, repeatedly press
2.During playback, to fast rewind, repeatedly press
3.To resume normal playback, press
.
to increase the fast forward speed 2x, 4x, 8x, 20x.
to increase the fast reverse speed 2x ,4x ,8x ,20x.
Slow Motion
1.During playback, repeatedly press SLOW to play at 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 speeds.
2.To resume normal playback, press
.
You can only perform slow motion play in the forward direction.
Frame-by-Frame Playback
1.During playback, press
on the Player to pause.
2.Repeatedly press
to play one fame at a time.
3.To resume normal playback, press
on the Player or
You can only perform step play in the forward direction.
on the remote control.
5
17
Playing a Disc
Repeat Playback
You can play a chapter, a track, a title, a file or the entire disc repeatedly.
1.During playback, repeatedly press REPEAT to choose a Repeat option. Depending on the type of disc,the Repeat options may
be different.
2.To cancel repeat playback, repeatedly press REPEAT until " REP:[ OFF ] " appears on the screen.
Mark (Bookmark)
The Mark function lets you select parts of a DVD so that you can quickly find the section at a later time.
Follow these steps to set up marker playback:
1.During playback, press MARK on the remote control.
2.Use
to select the desired underscore.
3.When you reach the scene you want to mark, pres
s ENTER to confirm; and the underscore changes to a number (1, 2, 3, 4 or 5 ).
4.Repeat the above procedure for a new scene. You can have up to 5bookmarks.
You can perform marker playback at any time by press
i ng MARK, and using
to select one of the marks, then pre
s sing on
the Player to start playing the bookmarked scene. The playback continues until the end of the disc. Repeat the above to play the
other marked scenes.
GOTO
You can go directly to a desired chapter and play, or play at a desired point of time. Follow these steps
:
(A)To play a specific chapter
1. Press GOTO, use
to select title (TT) and chapter
(CH) and enter the desir ed number.
2. Press ENTER to confirm and start play.
5
18
(B)To play from a specific point of time.
1. Press GOTO, repeatedly press to move to the time display and
it changes 00:00:00.
2. Fill in the time (hour: minute: second).
3. Press ENTER to confirm and start play.
Playing a Disc
ZOOM
1.Press ZOOM repeatedly during playback or pause to enlarge (2X, 3x, 4x, ) or reduce (1/2, 1/3, 1/4) the image.
2.Use direction keys (
and
) to move around (pan and scan) the enlarged image.
MUTE
1. Repeatedly press MUTE until " MUTE " appears on the display to silence the audio. Press MUTE again to turn on audio.
MENU/PBC
Press MENU/PBC to return to the dis c's Start Menu if it has the Start menu, if not, " INVALID KEY " appears. Use " TITLE " to
return to the beginning of the disc if there is no Start Menu.
LANGUAGE
To switch voice language, press LANGUAGE, the currently selected language is displayed on the screen. Repeatedly
press LANGUAGE to select other language if the disc has multiple languages.
You can also switch the voice language in disc menu screen by pressing MENU.
SUBTITLE
Repeatedly press SUBTITLE during playback to change the subtitle's language if the disc has multiple language substitle. You can
turn off subtitle when " OFF " is selected.
ANGLE
With DVDs featuring recordings of pictures shot from different angles, you can choose any desired viewing angle during playback.
To switch to different view angle, press ANGLE, the currently selected angle is displayed on the screen, repeatedly press ANGLE to
select your desired angle.
5
19
Playing a Disc
TITLE
Press TITLE, it takes you to the very beginning of the title and play, or to the MENU if it has title menu.
DISPLAY
Repeatedly press DISPLAY during playback to display various playback information such as current title, chapter, track
elapsed time, languages etc.
L/R
This function is mostly used for karaoke (sing along) discs, by repeatedly pressing L/R, you can select STEREO, MONO L,
MONO R.
P/N
This is used when you connect the Player to a TV and watch video on the TV. Repeatedly press P/N to select NTSC, PAL and AUTO to match that of
your TV.
The LCD screen does not have NTSC or PAL, so if you watch video on the Player's screen, it is recommended to set to NTSC which will give a better video
quality. The player will play both PAL or NTSC DVD's tiltes even when the Player is set to NTSC.
5
20
Playing MP3 and Regular Audio CD
Valid MP3 CD and CD-R/RW
The MP3 files should be ISO9660 or Joliet format.
Use " mp3 " as the file extension.
Play
In most cases, when a MP3 or CD is placed into the player, the first song file of the first folder palys.
In other cases, the file manger appears. Use direction keys (
and
) to select the song file and press Play
control to play.
on the Player or
on the remote
5
21
Playing Picture CD
Valid Picture
The player can play both Kodak Picture CD that you order from photo processing store, and home-made CD by burning JPEG files onto a CD-R or
CD-RW disc.
Play
In most cases, after the disc is placed into the player, the first file will be shown.
In other cases, the file manger appears. Use direction keys (
and
) to select the picture and press ENTER to view one picture or press PLAY
the Player or
on the remote control to start the slide show ( plays photos automatically).
Press ZOOM to enlarge the photo and use
and
to move around the enlarged photo.The slide show function stops when your press ZOOM.
on
Pause
1.During playback, press
(on the remote) or
(on the player) to pause.
2.Press
(on the remote) or
(on the player) to resume playback.
Next/Previous
You can manually skip to the next picture by pressing
, and to skip to the previous picture by pressing
.
Rotate
The picture can be rotated and flipped.
1.During playback or pause, use direction keys (
respectively.
and
) to rotate right 90 degrees, left 90 degrees, flip vertically and horizontally
UP-DOWN
Original
5
22
Rotate right 90 degrees
LEFT-RIGHT
Flip vertically
Flip horizontally
Setting TV system, Screen Saver, TV type (4:3/16:9), Password, Rating, Default
1.Press SETUP on the remote control.
TV type 4:3 or 16:9
2.Use the direction keys(
) to select SYSTEM SETUP
and its sub-menu.
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
STANDBY
MENU/PBC
DISPLAY
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
1
2
3
4
5
6
7
8
9
0
Selecting TV system
4:3 LB (Letter Box)
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
4:3 PS( Pan Scan)
The left and right of the screen are cut off and displays the
central portion of the 16:9 screen.
STANDBY
MENU/PBC
DISPLAY
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
1
2
3
4
5
6
7
8
9
0
10+
SLOW
ENTER
10+
SLOW
ENTER
SETUP
REPEAT
MARK
GOTO
ZOOM
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
SETUP
NTSC
PAL
AUTO
REPEAT
MARK
GOTO
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
4:3PS
4:3LB
16:9
ZOOM
EXIT SETUP
REMOTE CONTROL
MODEL No.:RMC-221
EXIT SETUP
REMOTE CONTROL
MODEL No.:RMC-221
STANDBY
Changing password
MENU/PBC
STANDBY
DISPLAY
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
1
2
3
4
5
6
7
8
MENU/PBC
1. Use direction keys (
) to select PASSWORD.
2. Key in your old password ( 000000 if this is the first use).
press ENTER to confirm.
3.Key in new password and again to verify.
Turning on/off screen saver
DISPLAY
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
1
2
3
4
5
6
7
9
0
SYSTEM SETUP
9
0
10+
SLOW
ENTER
SETUP
REPEAT
MARK
GOTO
ZOOM
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
ON
OFF
8
10+
SYSTEM SETUP
SLOW
ENTER
SETUP
EXIT SETUP
REPEAT
MARK
GOTO
ZOOM
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
REMOTE CONTROL
MODEL No.:RMC-221
REMOTE CONTROL
EXIT SETUP
MODEL No.:RMC-221
5
23
Setting TV system, Screen Saver, TV type (4:3/16:9), Password, Rating, Default
STANDBY
STANDBY
DISPLAY
MUTE
P/N
Setting rating
LANGUAGE
SUBTITLE
TITLE
1
2
3
4
5
6
0
7
ENTER
SETUP
MARK
GOTO
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
Resetting to default setting
1
2
3
4
5
6
7
8
9
0
8
10+
SLOW
REPEAT
DISPLAY
L/R
ANGLE
9
MENU/PBC
MENU/PBC
ZOOM
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
10+
SLOW
1
2
3
4
5
6
7
8
KID SAFE
G
PG
PG13
PG-R
R
NC-17
ADULT
ENTER
SETUP
REPEAT
MARK
GOTO
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
RESTORE
ZOOM
EXIT SETUP
REMOTE CONTROL
MODEL No.:RMC-221
REMOTE CONTROL
MODEL No.:RMC-221
1.Go to PASSWORD and enter the password to open the lock
for Rating, the " " shows
2.Go to RATING and select the rating.
3.Go back to PASSWORD and enter the password again to lock
the Rating, the " " shows.
5
24
All settings will revert to the original factory settings when
RESTORE is selected.
Setting Language for OSD, Voice, Subtitle, Menu
Although this Player supports a list of different languages for OSD, subtitle and voice, the disc must have the specific language(s)
builted-in in order to effect the multi-language function of this Player.
1.Press SETUP on the remote control.
2.Use the direction keys(
) to select LANGUAGE SETUP and its sub-menu.
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
STANDBY
MENU/PBC
STANDBY
MENU/PBC
DISPLAY
MUTE
P/N
L/R
DISPLAY
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
ANGLE
LANGUAGE
SUBTITLE
TITLE
Changing OSD language
2
3
1
2
3
4
5
6
7
8
9
0
1
10+
SLOW
ENTER
SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
STANDBY
REPEAT
MARK
DISPLAY
MUTE
ANGLE
LANGUAGE
Changing subtitle language
4
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
MENU/PBC
GOTO
ZOOM
P/N
1
2
3
4
5
6
7
8
9
0
ENTER
SETUP
L/R
DISPLAY
MUTE
TITLE
ANGLE
LANGUAGE
3
5
6
7
9
0
8
10+
ENTER
SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
MARK
GOTO
P/N
ZOOM
SUBTITLE
L/R
TITLE
Changing menu language
4
SLOW
REPEAT
MENU/PBC
GOTO
ZOOM
ENGLISH
FRENCH
SPANISH
PORTUGUESE
GERMAN
ITALIAN
OFF
MODEL No.:RMC-221
Changing voice language
2
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
REMOTE CONTROL
MODEL No.:RMC-221
1
LANGUAGE SETUP
EXIT SETUP
STANDBY
REPEAT
MARK
REMOTE CONTROL
SUBTITLE
10+
SLOW
ENGLISH
FRENCH
SPANISH
PORTUGUESE
LATIN
GERMAN
ITALIAN
1
2
3
5
6
7
9
0
4
8
10+
SLOW
ENTER
SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
REPEAT
MARK
GOTO
REMOTE CONTROL
REMOTE CONTROL
MODEL No.:RMC-221
MODEL No.:RMC-221
ZOOM
ENGLISH
FRENCH
SPANISH
PORTUGUESE
GERMAN
LATIN
ITALIAN
5
25
Setting Audio output
1.Press SETUP on the remote control.
2.Use the direction keys(
) to select AUDIO SETUP and its sub-menu.
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
STANDBY
DISPLAY
MUTE
MENU/PBC
P/N
L/R
Changing AUDIO output
LANGUAGE
SUBTITLE
1
2
3
4
5
6
7
8
9
0
ANGLE
TITLE
10+
AUDIO SETUP
AUDIO OUT
SLOW
ENTER
SETUP
REPEAT
MARK
GOTO
EXIT SETUP
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
ZOOM
REMOTE CONTROL
MODEL No.:RMC-221
Note:
SPDIF/OFF:select this when you do not want to have digital
audio signal output.
SPDIF/RAW:select this when the digital audio output is
connected to an external amplifier with Dolby
Digital or DTS decoder which gives 5.1 channel
sound.
SPDIF/PCM:select this when the external amplifier has no
decoder.
5
26
Setting Video's Brightness, Contrast, Hue, Saturation
1.Press SETUP on the remote control.
2.Use the direction keys(
) to select VIDEO SETUP and its sub-menu.
3.Press ENTER to confirm your selection.
4.Press SETUP to exit, or select EXIT SETUP to exit.
STANDBY
DISPLAY
MUTE
LANGUAGE
ANGLE
P/N
SUBTITLE
2
3
4
5
6
7
8
9
0
10+
SLOW
ENTER
SETUP
STANDBY
GOTO
MUTE
P/N
L/R
ANGLE
LANGUAGE
SUBTITLE
TITLE
TITLE
1
MARK
ZOOM
Adjusting hue
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
1
2
3
4
5
6
7
8
9
0
VIDEO SETUP
ENTER
SETUP
REPEAT
P/N
LANGUAGE
SUBTITLE
STANDBY
2
3
4
5
6
7
8
10+
SLOW
ENTER
SETUP
REPEAT
MARK
GOTO
EXIT SETUP
MUTE
MENU/PBC
P/N
L/R
TITLE
1
0
ZOOM
L/R
Adjusting contrast
9
GOTO
+6
+4
+2
0
-2
-4
-6
MODEL No.:RMC-221
DISPLAY
ANGLE
MARK
BRIGHTNESS
CONTRAST
HUE
SATURATION
REMOTE CONTROL
MENU/PBC
MODEL No.:RMC-221
MUTE
10+
SLOW
12
10
8
6
4
2
0
REMOTE CONTROL
DISPLAY
MENU/PBC
DISPLAY
L/R
Adjusting brightness
REPEAT
STANDBY
MENU/PBC
ZOOM
Adjusting saturation
LANGUAGE
SUBTITLE
1
2
3
4
5
6
7
8
9
0
ANGLE
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
12
10
8
6
4
2
0
TITLE
10+
SLOW
ENTER
SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
REPEAT
MARK
GOTO
ZOOM
12
10
8
6
4
2
0
REMOTE CONTROL
MODEL No.:RMC-221
REMOTE CONTROL
MODEL No.:RMC-221
5
27
Adjusting LCD Screen
Following these steps to adjust the LCD quality during playback or while paused.
1.Repeatedly press MODE on the screen panel to select the parameters listed in the menu.
You can change BRIGHTNESS, CONTRAST, SATURATION and HUE.
2.Repeatedly press (or hold down) UP and DOWN to change the setting of the parameter selected.
3.To reset the setting to its defaulted value, select RESET by repeatedly pressing MODE then press UP or DOWN to confirm.
MODE
REVERSE
16:9/4:3
5
28
DOWN
UP
Troubleshooting
If your DVD player dose not seem to be functioning properly, check the items below before you contact a service center.
Symptom
Check
Power does not turn on
or suddenly turns off
Make sure the AC Power cord is securely plugged into an AC outlet.
Turn the power off and then back on.
Battery pack is in place but
the power does not turn on
or suddenly turns off
Check that the battery pack is charged. If not, recharge it.
Remote control does not work
Check that the battery is inserted in the "+" and "-" directions properly.
The batteries may be dead. Replace them with new batteries.
Check that the signal transmission is directed at the remote control senor on the DVD player.
Disc does not play
Check that the disc is a DVD, DVD-RW, VIDEO CD, or AUDIO CD.
Do not use a disc that has scratches or dirt.
Check that the label-side of the disc is facing up.
The pick-up lens of the DVD player may be dirty. Contact the service center for lens cleaning.
No picture
Check if the LCD on/off switch is stuck, and cannot move freely when the top cover is open.
No picture and sound
Check INPUT/OUTPUT is switched to OUTPUT not INPUT.
With power turned on, slide INPUT/OUTPUT once.
No sound
Check the volume setting. If set to zero, turn up volume level.
Check that the headphones are plugged into the PHONES and Audio jack. Speakers
cannot be used with the headphones.
5
29
Troubleshooting
Symptom
Check
While in the input mode, no picture is
output from the external component
to the DVD player
Check that the DVD player is in the INPUT mode and in the DVD mode.
Battery pack won't charge
Check that the DVD player is turned on.
Check that the video or audio cable is securely connected.
You cannot charge the battery pack with the player turned off.
A hot battery pack may take longer to charge.
Wait until the battery pack is sufficiently cooled down.
Charging LED indicator does not light
Check with another fully charged pack if the LED lights.
Check that the AC adaptor is securely plugged in.
If DVD or battery pack is overheated, you will not be able to charge the battery pack.
LED charging indicator quickly
turns to red and green LEDs lit
simultaneously
Disconnect the AC adaptor and reconnect.
Use another battery pack, if the same symptom occurs, the AC adaptor may be defective.
If the second battery pack charges without any problem, your first battery pack may be
defective.
5
30
Specifications
General
Power Requirements
Input AC 100V~240V, 50/60 Hz, Output DC 12V
Power Consumption
> 15 W
Weight
1201g (without battery pack)
Dimensions
Operating Temperature Range
252mm ( W ) x 175mm ( D ) x 30.5mm ( H )
+10 C~ +40 C
Readable Disc
DVD, DVD-R, DVD+R, DVD-RW, VCD,SVCD,DVCD, MP3,PICTURE CD,
CD, CD-G, HDCD, CD-R, CD-RW, MPEG4/DivX
Readable USB
DSC, Camcorder, U-drive, MP3 player, and other USB storage devices
Readable Card
SD/MMC/MS card
Video
Output
Composite Video
1 channel : 1.0 Vp-p (75
2 Channel
L(1/L), R(2/R)
Frequency Response
+ 2.5dB
20Hz - 20 kHz -
S/N Ratio
> 85 dB
Dynamic Range
> 80 dB
Audio
Output
Battery Specifications
load)
Operating environment
ITEM
Nominal Voltage
SPECIFICATION
Charge
7.2V
Discharge
Capacity
Minimum 4200 mAh
Store less than 1 month
-20 C~ +60 C
Charge Voltage
Max Charge Current
+ 0.05V
8.400 4A
Store less than 3 months
-20 C~ +45 C
Store less than 1 year
-20 C~ +25 C
Use Time
Charge time in Full
2.5HR
4.5HR
0 C~ +45 C
-20 C~ +60 C
The specifications are subject to change without notice.
Weight and dimensions are approximate.
5
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement