TEK MHD44TP Data Sheet

TEK MHD44TP Data Sheet
TEK MHD44TP
Data Sheet
V120513
The TEK MHD44TP 79055 is a unique 4x4 HDMI matrix switcher with HDBaseT outputs with EDID & HDCP
management. Included in the unit are IR and RS-232 inserters for the HDBaseT connections, and audio de-embedders
with both analog and digital outputs. Any input can be routed to any output with support for high resolution 1080P and HD3D. Breakaway audio is not supported. The HDBaseT output supports PoE and works with TPHD402PR to transmit
HDMI, IR and RS-232 over a single Cat5e/Cat6 cable up to 200 feet.
Benefits

Easy to install and operate

Reduces cabling and cost

Reduces rack space

Easy integration using Cat 5e cabling
Features

Resolution up to 1920*[email protected] including HD-3D

HDCP Compliant and DVI 1.0 compatible

Powerful EDID and HDCP management

Detects input signal for power control of DVD / Blu-ray

HDBaseT Lite outputs, to transmit HDMI, IR & RS232 up
to 200 feet over a single Cat 5e/Cat 6 cable

Output PoE provides power for all the receivers
connected to the HDBaseT outputs

RS-232 and TCP/IP (Optional) control with simple ASCII
commands

IR control

IR OUT signal switching follows with video signal, or can break away from video switching

Front panel Menu operation for configuration, control and status

Supports remote control from receiver by IR or RS232 by sending embedded commands to control devices

Supports centralized IR control to control all the remote display devices

Supports PCM, Dolby, and DTS 5.1 surround

Standby mode operation to reduce energy and extend life.
Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | www.TEKVOX.com
Device Specifications
Video Input
Video Output
Input
4 HDMI
Input
Connector
Female HDMI
Input Level
Input
Impedance
Video General
Gain
T.M.D.S.
2.9V/3.3V
100Ω
(Differential)
0 dB
Video Signal
HDMI (or DVI-D)
Resolution
Range
Transmission
Distance
EDID
Management
HDCP
Audio General
Up to 1920 x 1200
or [email protected]
T.M.D.S. 2.9V/3.3V
Output
Impedance
100Ω (Differential)
Bandwidth
Maximum Pixel
Clock
Switching
Speed
6.75Gbit/s
165MHz
200ns (Max.)
Supports HDCP 1.3, auto and manual HDCP management.
Stereo Output
200 ohm
IR
Output Level
EDID data and manual EDID management
Stereo audio
Digital audio
Control Ports
Output
Connector
2 HDMI
4 HDBaseT
Female HDMI
Female RJ45(with LED indicators)
200 feet with PoE
Output Signal
Frequency
Response
Control Parts
Output
Output
Connector
Coax
Output
4 3p captive screw connectors
4 Coax (RCA)
Supports PCM, Dolby, DTS 5.1
20Hz~20KHz
4 IR OUT (green)
4 IR IN (black)
1 IR EYE (black)
1 TCP/IP (female
RJ45)
1 RS232 (9 pin
female D)
4 RS232 (3p
captive screw
connectors)
Default IR remote
Extend IR EYE
Panel Control
Front panel buttons
TCP/IP
Control
Works with PTNET2.2
General
Power Supply
Temperature
Case
Dimension
Warranty
Input: 100VAC ~
240VAC,
Power
50/60Hz
Consumption
Output:
DC48V,1.6A
Humidity
-20 ~ +70℃
W19 x H1.73 x
D9.25 IN.
Product
(1U high, full
Weight
rack wide)
3 years parts and labor
48W
10% ~ 90%
1.8Kg
Specifications are subject to change without notice.
Contact us for additional information or to find an Authorized TEKVOX Dealer in your area.
11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | www.TEKVOX.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement