ABB micro drives - ACS55, 0.25 to 3 hp/0.18 to 2.2 kW, Catalog

ABB micro drives - ACS55, 0.25 to 3 hp/0.18 to 2.2 kW, Catalog
Low voltage AC drives
ABB micro drives
ACS55
0.25 to 3 hp/0.18 to 2.2 kW
Catalog
ACS55 IP20
Overview
ACS55 micro drives are designed for use in a wide variety of
simple machinery applications where only 115 V single phase
power is available. Feed-thru wiring with power leads entering at
the top and motor cables exiting at the bottom allows for easy
replacement of contactors and motor starters. These drives
Improve machine performance with the combined advantages of
variable speed control and energy savings for small AC motors.
ACS55 micro drives are compact with multiple mounting
positions and options. DIN rail mounting capability makes them
ideal for panel builders. The drive is quickly programmed using
switches and potentiometers. More advanced programming
is possible using the DriveConfig kit PC tool. These drives are
readily available as standard products from ABB’s worldwide
distribution network.
The ACS55 drive is ideal for those situations where a low cost,
easy to install, and simple to operate variable frequency drive is
needed.
Highlights
– Power range: 0.25 to 3 hp
– 150% peak overload capacity
– Compact and slim design
– Several installation alternatives
– Reduced motor noise with high switching frequency
– Easy configuration using switches and potentiometer
– Fast programming of drives without the need for a power
connection
– Available with or without a built-in 1st environment EMC filter
as standard
– Optional speed potentiometer and operator control switch kit
– Selectable for linear (constant torque) or squared (variable
torque) scalar control.
– RoHS
– Coated boards
Applications
– Pumps and fans
– Conveyors
– Automatic gates
– Solar trackers
– Exercise equipment
– Whirlpools
– Printing and packaging machines
– Food and beverage machines
Feature
Advantage
Benefit
Worldwide availability and
Drives are available worldwide and stocked in four regions.
Fast and reliable delivery with dedicated support to any
service
Dedicated global service and support network that is one of
country in the world.
the largest in the industry.
Single phase supply
Slim design
Suitable for single phase residential and commercial
Avoids cabling and installation costs associated with
applications.
three-phase supplies.
Fits easily into a variety of cabinet designs.
Reduced cabinet size or greater packing density can be
achieved.
Several installation alternatives
Can be mounted using screws or DIN-rail side-by-side or
The same drive type can be used across different designs,
sideways.
saving time and installation costs.
High switching frequency
Reduced motor noise.
Lower disturbance to the building’s occupants.
Built-in EMC filter
High degree of electromagnetic compatibility.
Low EMC emissions in all environments.
Category C2 (1 st environment) RFI filters as standard.
Easy configuration
Quick setup and simple configuration
Substantial time savings. Minimal expertise needed.
DriveConfig kit available as an
Fast, easy and safe configuration of drives without the need
Substantial time savings. Drive can be configured without
option
for a power connection.
an electrician present.
Extended range of application parameter values and more
Drive suitable for a wide range of applications.
drive functionality.
Reliable copying of parameter values from PC to drives.
Reduced risk of errors during setup.
Wide ambient operating
Drives can be operated in high ambient temperatures up to
One drive series can be used in a wide range of different
temperature
55 °C (131 °F) degrees.
environmental conditions.
2 ABB micro drives ACS55 | Catalog
Easily integrated drives for a wide range of applications
ACS55 micro drives bring the benefit of variable speed control
to a wide variety of applications such as fans, pumps, material
handling systems, a variety of commercial machines and many
more.
In automatic gates the drive controls the motor that moves the
gate’s barrier up and down. The drive provides the barrier with
smooth start and stop, thereby reducing maintenance costs.
A slim design allows installation of the drive in the restrictive
space associated with gate enclosures.
In solar trackers the drive controls the electric motor that turns
the solar panel to track the sun. With a wide temperature range
up to 55 °C, the drive can be used in environments with diverse
ambient temperature. The DriveConfig kit provides a quick
and safe way to configure multiple drives for hundreds or even
thousands of solar trackers.
In treadmills the drive controls the speed of the motor
powering the running belt. The drive offers high torque and
accurate speed control throughout the treadmill’s speed range
providing smooth acceleration and deceleration for the user.
Audible noise is reduced through the drive switching at higher
frequencies. A built-in 1st environment EMC filter as standard
provides low EMC emissions in all environments.
In whirlpool baths the drive controls the pump that generates
the pool’s water jets. The user controls the start, stop and
power of the jets via a user interface connected to the drive’s
I/O. The drive provides silent operation by using a high
switching frequency. The drive’s heatsink for cooling enables the
drive to be enclosed to a high protection class enclosure.
Catalog | ABB micro drives ACS55 3
Ratings, types and voltages
Type designation
PN
hp
Output current
PN
kW
Fuse*
Input
I2N
Max
current
A
A
A
Heat
Frame
loss**
size
A
W
H1
H2
W
D
Weight
in (mm)
in (mm)
in (mm)
in (mm)
lbs (kg)
No EMC Filter
110/120 V, +10/-15%, 1-phase AC supply, 3-phase output 200/240 V
ACS55-01N-01A4-1
0.25
0.18
1.4
2.1
6.4
10
24
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.4 (0.65)
ACS55-01N-02A2-1
0.5
0.37
2.2
3.3
9.5
16
35
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.5 (0.7)
200/240 V +10/-15%, 1-phase AC supply, 3-phase output 200/240 V
ACS55-01N-01A4-2
0.25
0.18
1.4
2.1
4.4
10
21
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.4 (0.65)
ACS55-01N-02A2-2
0.5
0.37
2.2
3.3
6.9
16
32
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.5 (0.7)
ACS55-01N-04A3-2
1.0
0.75
4.3
6.5
10.8
16
51
B
6.7 (170)
5.8 (146.5)
2.7 (67.5)
5.0 (128)
2.0 (0.9)
ACS55-01N-07A6-2
2
1.5
7.6
11.4
18.2
25
74
C
7.6 (194)
6.7 (171)
2.8 (70)
6.3 (159)
2.6 (1.2)
ACS55-01N-09A8-2
3
2.2
9.8
14.7
22
32
103
C
7.6 (194)
6.7 (171)
2.8 (70)
6.3 (159)
2.9 (1.3)
Built-in EMC filter
110/120 V, +10/-15%, 1-phase AC supply, 3-phase output 200/240 V
ACS55-01E-01A4-1
0.25
0.18
1.4
2.1
6.4
10
24
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.4 (0.65)
ACS55-01E-02A2-1
0.5
0.37
2.2
3.3
9.5
16
35
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.5 (0.7)
200/240 V +10/-15%, 1-phase AC supply, 3-phase output 200/240 V
ACS55-01E-01A4-2
0.25
0.18
1.4
2.1
4.4
10
21
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.4 (0.65)
ACS55-01E-02A2-2
0.5
0.37
2.2
3.3
6.9
16
32
A
6.7 (170)
5.8 (146.5)
1.8 (45)
5.0 (128)
1.5 (0.7)
ACS55-01E-04A3-2
1.0
0.75
4.3
6.5
10.8
16
51
B
6.7 (170)
5.8 (146.5)
2.7 (67.5)
5.0 (128)
2.0 (0.9)
ACS55-01E-07A6-2
2
1.5
7.6
11.4
18.2
25
74
D
8.9 (226)
8.0 (203)
2.8 (70)
6.3 (159)
3.5 (1.6)
ACS55-01E-09A8-2
3
2.2
9.8
14.7
22
32
103
D
8.9 (226)
8.0 (203)
2.8 (70)
6.3 (159)
3.7 (1.7)
* Recommended values for type Gg fuse. Do not use ultra rapid or low peak fuses. Follow local rules.
** Frame size A & B are convection cooled and must be installed with sufficient spacing.
Frame size C & D are fan cooled and can be installed with no space between them.
Ensure minimum installation space is provided. See ACS55 user’s manual for more detailed information.
PN = Nominal power
I2N = Nominal amps
Supply terminals L, N (R, S)
Configuration switches
Control potentiometers
H1
DriveConfig kit interface
H2
Relay output terminals
Analog input signal selector (U/I)
Control terminal
Motor terminals T1, T2, T3 (U, V, W)
H1 =
H2 =
W =
D =
D
W
4 ABB micro drives ACS55 | Catalog
Height with mounting clip
Height without mounting clip
Width
Depth
Options
DriveConfig kit
The DriveConfig kit is a PC tool for programming and control
of ACS55 drives that need more functionality. The kit enables
parameter setting and software updating without the need
for a power connection. The drives can even remain in their
delivery boxes during configuration which means no need for a
safe area. The DriveConfig kit features online drive control and
monitoring of up to four signals simultaneously. Together with
the ACS55 drives series, the DriveConfig kit helps save time by
ensuring fast setup, accurate parameter settings and reliable
operation.
The DriveConfig kit gives users access to an extended range of
application parameter values, which can be used to add drive
functionality. Please see the table on the right for the value
ranges, functionality and the actual signals enabled by the
DriveConfig kit.
The DriveConfig kit includes:
– Hardware and cables
– PC software
– User’s manual in English (hardcopy and PDF)
– Battery charger
DriveConfig kit requirements:
– PC with Microsoft Windows 2000/XP/Vista/Windows 7
operating system
– USB port on the PC
Application parameters
P1105 Maximum reference
0 to 250 Hz
P1202 Constant speed 1
0 to 250 Hz
P1203 Constant speed 2
0 to 250 Hz
P1204 Constant speed 3
0 to 250 Hz
P1301 AI min
0/1 (0/20%)
P1401 Relay output
Fault/Fault (-1)/Run
P2007 Minimum frequency
0 to 250 Hz
P2008 Maximum frequency
0 to 250 Hz
P2021 Minimum frequency to modulate
P2102 Stop mode
Coast/ramp
P2202 Acceleration time
0.1 to 100 s
P2203 Deceleration time
0.1 to 100 s
P2603 IR compensation voltage
0 to 80 V
P2604 IR compensation frequency
0 to 250 Hz
P2605 U/F ratio
Linear/squared
P2606 Switching frequency
5/16 kHz
P3005 Motor thermal protection
Enabled/disabled
P3101 Reset
Stop, Automatic + stop, No reset
P9902 Application macro
ABB Standard, 3-wire,
Alternate, Constant speed,
Motor potentiometer, Motpot (R)
P9905 Motor nominal voltage
110 to 230 V AC
P9906 Motor nominal current
50 to 150%
P9907 Motor nominal frequency
40 to 250 Hz
P9912 SW Parameters
Actual signals (read only)
P0102 Output frequency
Hz
P0104 Current
A
P0107 DC voltage
V
P0109 Output voltage
V
P0111 Reference
Hz
P0160 DI status
000/111
P0162 RO status
0/1
P0401 Last fault
Fault name
Potentiometer
The ACS55-POT potentiometer is an option for the ACS55 drives.
Two switches are included in addition to the potentiometer for
drive control; start/stop and forward/reverse. The ACS55-POT
potentiometer does not require an external power source.
Catalog | ABB micro drives ACS55 5
Technical data
Mains connection
Control connections
Power range
0.25 to 3 hp (0.18 to 2.2 kW)
One analog input
Voltage
1-phase, 110 to 120 V and 200 to 240 V,
+10/-15%
Voltage signal
0 (2) to 10 V, 200 kΩ single-ended
Current signal
0 (4) to 20 mA, 100 Ω single-ended
48 to 63 Hz
Potentiometer reference
value
10 V ±2% max. 10 mA, 1 kΩ ≤ R ≤ 10 kΩ
3-phase, from 0 to U SUPPLY
(for 110/120 V from 0 to 230 V)
Response time
≤ 60 ms
Resolution
0.1%
0 to 120/130 Hz,
0 to 250 Hz with DriveConfig kit
Accuracy
±1%
Three digital inputs
12 V DC with internal supply or 12 to 24 V DC
external supply, PNP
Frequency
Motor connection
Voltage
Frequency
Overload capacity
150% (60 s)
Motor control method
Scalar U/f
Application parameters
Motor nominal frequency
Input impedance
1.5 Ω
Response time
≤ 9 ms
As standard
With DriveConfig kit
One relay output
50/60 Hz
40 to 250 Hz
Switching voltage
12 to 250 V AC or max 30 V DC
Maximum continuous
current
2A
Acceleration time
0.1 to 30 s
0.1 to 100 s
Deceleration time
0.1 to 30 s
0.1 to 100 s
Maximum frequency
50 to 120 Hz
0 to 250 Hz
Product compliance
Relay output
Fault/Run
Fault/Fault (-1)/Run
Load type
Pump/fan or constant
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Machinery Directive 2006/42/EC
Quality assurance system ISO 9001 and Environmental system ISO 14001
CE, UL, cUL, C-Tick and GOST R approvals
RoHS compliant
Switching frequency
Standard
5 kHz, adjustable up to 16 kHz with automatic
switching frequency reduction
Environmental limits
Ambient temperature
-20 to 40 °C (-4 to 104 °F) With nominal current and 5 kHz switching
frequency, no frost allowed
up to 55 °C (131 °F)
With derating
Altitude
Output current
Nominal current: 0 to 1000 m (0 to 3280 ft)
reduced by 1% per 100 m (328 ft) over 1000 m
to 2000 m (3280 ft to 6561 ft)
Relative humidity
Lower than 95% (without condensation)
Degree of protection
IP20
Contamination levels
No conductive dust allowed,
corrosive liquids or gases (IEC 60721-3-3)
Typical I/O connections
EMC standards in general
ACS55
jog
reverse
start/
stop
6 ABB micro drives ACS55 | Catalog
EN 55011, product
product standard
family standard for
product standard
industrial, scientific
COM
COM
SPEED/AI
+10 V
+12 V
START
REV
JOG
SCR
10 RO1
11 RO2
EN 61800-3/A11 (2000), EN 61800-3 (2004),
and medical (ISM)
equipment
1 st environment,
unrestricted distribution
st
fault or run
Category C1
Class B
1 environment,
restricted distribution
Category C2
2 nd environment,
unrestricted distribution
Category C3
nd
2 environment,
restricted distribution
Group 1
Group 1
Class A
Group 2
Class A
Category C4
Not applicable
Taking care of your drives, caring about your business
Whether a drive is a part of the product you sell or a
component in your production process, reliable and
efficient drive operation is key. You will find support
from your first meeting with ABB to the drive installation,
Installation and commissioning
We offer accurate advice and timely
support before and during installation.
ABB-certified engineers or third-party
channel companies can adjust the
drive parameters to meet the precise
demands of the application.
commissioning and maintenance, all the way up to the
eventual drive replacement and recycling. With offices in
over 90 countries, we are well placed to offer you technical
advice and local support.
Fast and reliable global delivery and
support
ABB drives, spare parts and services
are available worldwide and can be
purchased through the dedicated global
service and support network. More than
1400 companies, located throughout the
world and able to serve you locally as
well as provide you technical support.
These companies include ABB’s own
offices and authorized third party channel
companies.
Check your local ABB contact from
www.abb.com/searchchannels
Training services
To enhance personnel’s product
knowledge, and, with that, improve
plant safety and availability we offer a
selection of on-line courses. Check for
more information about ABB’s training
centers and the courses from
www.abb.com/abbuniversity.
Catalog | ABB micro drives ACS55 7
For more information please contact your local ABB
representative or visit:
www.abb.com/drives
© Copyright 2014 ABB. All rights reserved.
Specifications subject to change without notice.
3AUA0000163305 REV F US 19.5.2014 #17130
Contact us
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement