Epson SureColor SC-T3200-PS Guide

Add to my manuals
59 Pages

advertisement

Epson SureColor SC-T3200-PS Guide | Manualzz

Network Guide

NPD4775-02 EN

Epson Network Guide

Copyright and Trademarks

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko

Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko

Epson Corporation.

Microsoft

®

, Windows

®

, and Windows Vista

®

are registered trademarks of Microsoft Corporation.

Apple

®

, Mac

®

, Mac OS

®

, and Bonjour

®

are registered trademarks of Apple, Inc.

Apple Chancery, Chicago, Geneva, Hoefler Text, Monaco and New York are trademarks or registered trademarks of Apple,

Inc.

EPSON

®

, EPSON EXCEED YOUR VISION, EXCEED YOUR VISION and their logos are registered trademarks or trademarks of Seiko Epson Corporation.

Adobe

®

, Reader

®

and Acrobat

®

are trademarks of Adobe Systems Incorporated, which may be registered in certain jurisdictions.

This product includes RSA BSAFE

®

Cryptographic software of EMC Corporation.

RSA and BSAFE are registered trademarks or trademarks of EMC Corporation in the United States and other countries.

This product contains Runtime Modules of IBM Rational Rhapsody, Copyright IBM Corporation 2008. All Rights Reserved.

This product includes software developed by the University of California, Berkeley, and its contributors.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Copyright © 2014 Seiko Epson Corporation. All rights reserved.

Copyright and Trademarks 2

Epson Network Guide

Contents

Safety Instructions

Warning, Caution, Important, and Note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Chapter 1 Introduction

About Your Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

About This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operating Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Features of the Network Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Network Interface Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Status light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Network connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

About the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2 How To

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Selecting a Printing Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Printing from Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Printing from Mac OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Features of the Printing Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing Components on Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

About Installing Components on Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Windows 8.1/8/7/Vista/Server 2012/Server 2008. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Windows Server 2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Mac OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting Up the Network Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting the Network Interface to the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Configuring the Network Interface (For Windows Users). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Configuring the Network Interface (For Mac OS Users). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

About Installing the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Windows 8.1/8/7/Vista/Server 2012/Server 2008. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Contents 3

Epson Network Guide

Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Windows Server 2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Mac OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 3 Network Software

EpsonNet Config for Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

About EpsonNet Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Installing EpsonNet Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Accessing the EpsonNet Config User’s Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

EpsonNet Config for Mac OS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

About EpsonNet Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Installing EpsonNet Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Accessing the EpsonNet Config User’s Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

EpsonNet Config with Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

About EpsonNet Config. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Configuring the Network Interface Using EpsonNet Config with Web Browser. . . . . . . . . . . . . . . 34

Opening Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Remote Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

About Remote Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Configuring the Network Interface Using Remote Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

EpsonNet Print (For Windows Users). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

About EpsonNet Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Installing EpsonNet Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

For Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 Users. . . . . . . . . . . . . . . . . . 39

Configuring the Printer Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Chapter 4 Troubleshooting

General Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Cannot configure the network interface or cannot print from the network.. . . . . . . . . . . . . . . . . . 48

Cannot print even if you have assigned the IP address to the computer and the printer.. . . . . . . . 48

Unable to start EpsonNet Config.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

The message “EpsonNet Config cannot be used because no network is installed.” appears when you start EpsonNet Config.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Unable to start EpsonNet Config with Web Browser or Remote Manager.. . . . . . . . . . . . . . . . . . . 49

Contents 4

Epson Network Guide

The Model Name and IP Address do not appear in the EpsonNet Config dialog box.. . . . . . . . . . 49

Printing a Network Status Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Chapter 5 Tips for Administrator

Setting an IP Address on the Printer’s Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Secure Communication Using IPsec, Access Control, SSL, and IEEE 802.1X. . . . . . . . . . . . . . . . . . . . . . 50

IPsec protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Access Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

SSL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

IEEE 802.1X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Secure Communications (IPsec/Access Control). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Overview and Sample Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Configuration Workflow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Product Security Policies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Supported Security Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Index

Contents 5

Safety Instructions

Warning, Caution, Important, and Note

!

Warning

must be followed carefully to avoid serious bodily injury.

!

Caution

must be followed carefully to avoid bodily injury.

c

Important

must be observed to avoid damage to your equipment.

Note

contains important information and useful tips on the operation of your printer.

Epson Network Guide

Safety Instructions 6

Epson Network Guide

Chapter 1

Introduction

About Your Printer

Your printer has a built-in Ethernet interface and can connect anywhere on your network using

10Base-T, 100Base-TX, and 1000Base-T Ethernet. The built-in Ethernet interface, which is called the network interface in this manual, automatically selects the correct standard when it connects to a network. In addition, it automatically selects appropriate network protocols.

Because the network interface supports multiple protocols and automatically detects protocols on your network, you can print from Microsoft

®

Windows

®

and Apple

®

Mac OS

®

applications.

Use the Software Disc to easily configure the network interface for use on the TCP/IP network and install the printer driver. You can use the printer on the TCP/IP network at once.

If you want to configure the network interface for protocols such as TCP/IP, WSD, LLTD, UPnP,

Bonjour, and SNMP, use EpsonNet Config, the configuration utility provided with your product, to quickly and easily configure the network interface to use those protocols.

Note:

The EpsonNet Config utility configures the network interface to work only with protocols that exist on your network. This does not imply that you can use all of the above-mentioned protocols on your network or operating system. The protocols that the network interface can use may vary depending on the operating system and the network configuration.

About This Guide

This Network Guide contains information about using the network interface on a network. It includes how to set up the network interface, install the configuration software, and modify network settings of your printer and computers.

For information about your printer, see your User’s Guide.

Note:

To read the online guide, you must have Adobe Reader or Adobe Acrobat Reader installed on your

computer.

Introduction 7

Epson Network Guide

This guide is written for network administrators, and many of the steps included here require

detailed network knowledge and administrator rights.

The term “network administrator” refers to the person responsible for maintaining the network.

“Administrator” is synonymous with “Supervisor” in this guide.

The term “network interface” refers to the built-in Ethernet interface of the printer in this guide.

Some screen shots in this guide may list a printer name other than your printer. This difference does

not alter the instructions.

The supported operating systems are different depending on the printer. See your printer’s User’s

Guide for the supported operating systems.

Operating Environment

The network interface supports the following environments.

OS

Windows 8.1

Windows 8

Windows 7

Windows Vista

Windows Server 2012

Windows Server 2008

Windows XP (Home, Professional)

Windows Server 2003

Mac OS X 10.5 or Later

Protocol

TCP/IP (Standard TCP/IP port)

TCP/IP (EpsonNet Print port)

TCP/IP (Standard TCP/IP port)

TCP/IP (EpsonNet Print port)

Bonjour

IPv4

supported supported supported supported supported

IPv6

supported not supported not supported not supported supported

Features of the Network Interface

❏ Connects your Epson printer using a built-in Ethernet interface, which is called the network interface in this manual, to the network.

❏ Supports multiple protocols, such as TCP/IP, WSD, LLTD, UPnP, Bonjour, and SNMP.

❏ Supports 10Base-T, 100Base-TX, and 1000Base-T Ethernet.

Introduction 8

Epson Network Guide

❏ Supports Bonjour on Mac OS X 10.5 or later.

❏ Supports access control to your printer by filtering client computer’s IP addressees.

❏ Supports SSL (Secure Sockets Layer) for HTTPS protocols.

❏ Supports IPsec.

❏ Supports IEEE 802.1X.

❏ Supports EpsonNet Config with a Web browser and Remote Manager, which allows you to configure and monitor your printer using a Web browser.

Network Interface Operation

Status light

The indicator lights provide you with important information on the operations of the network interface.

Large format inkjet printers (Models that do not support 1000 Mbps communication)

Status light

Green

Green

Red

Red

Data light

Yellow

Yellow (Flashing)

Yellow

Yellow (Flashing)

Network Status

Ready (10 M link)

Receiving packets (10 M link)

Ready (100 M link)

Receiving packets (100 M link)

Large format inkjet printers (Models that support 1000 Mbps communication)

Status light

Red

Red

Green

Green

Data light

Yellow

Yellow (Flashing)

Yellow

Yellow (Flashing)

Network Status

Ready (100 M link)

Receiving packets (100 M link)

Ready (1000 M link)

Receiving packets (1000 M link)

Introduction 9

Epson Network Guide

Network connector

RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use this cable for 10Base-T, 100Base-TX, and 1000Base-T Ethernet.

c

Important:

You must use the following shielded twisted-pair cable to connect the network interface to a network.

Category-5 or higher for the 10Base-T or 100Base-TX connection

Category-6 or higher for the 1000Base-T connection

About the Software

The Software Disc provided with your printer includes the following network software.

Note:

The software provided varies depending on your printer model.

❏ EpsonNet Config for Windows is a Windows-based configuration utility for administrators that allows you to configure the network interface for various protocols such as TCP/IP, and SNMP.

See “EpsonNet Config for Windows” on page 31.

❏ EpsonNet Config for Mac OS is a Mac OS-based configuration utility for administrators that

allows you to configure the network interface for TCP/IP. See “EpsonNet Config for Mac OS” on page 32.

❏ EpsonNet Config with Web Browser and Remote Manager are Web-based configuration utility

programs that allow you to configure a network interface for TCP/IP and SNMP. See “EpsonNet

Config with Web Browser” on page 33 and “Remote Manager” on page 37.

❏ EpsonNet Print is a utility program that provides peer to peer printing to Epson printers on the

TCP/IP network. See “EpsonNet Print (For Windows Users)” on page 38.

Introduction 10

Epson Network Guide

Chapter 2

How To

Overview

This section describes the general procedure on how to set up the network interface for use on a network.

1. Check the network interface operation.

Check the functions and operations of the network interface, such as status lights and RJ-45

connector. See “Network Interface Operation” on page 9 for details.

2. Select a printing method.

Select a printing method appropriate for your network environment and operating system. If you

are not sure, see “Printing from Windows” on page 12 or “Printing from Mac OS” on page 12

for details.

3. Install the necessary components on your computer.

Make sure the necessary components (such as TCP/IP) are installed on the computer, and

network settings (such as IP address, subnet mask, etc.) of the computer is set. See “About

Installing Components on Your Computer” on page 13 for details.

4. Connect the network interface to the network.

Connect the network interface to the network. See “Connecting the Network Interface to the

Network” on page 18 for details.

5. Configure the network interface and install the printer driver.

See “Configuring the Network Interface (For Windows Users)” on page 19 or “Configuring the

Network Interface (For Mac OS Users)” on page 19 for details.

6. If necessary, configure the network settings of the network interface using EpsonNet Config.

Configure the network interface using EpsonNet Config. For Windows users, see “About

EpsonNet Config” on page 31. For Mac OS users, see “About EpsonNet Config” on page 32.

How To 11

Epson Network Guide

Selecting a Printing Method

Printing from Windows

Check if there is a Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 print server on your network, and then use the suggestions below.

Note:

Only the recommended printing methods are introduced here. See “Features of the Printing Methods” on page 12 for information on additional methods.

If no Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 print server exists

We recommend TCP/IP printing. See “Windows 8.1/8/7/Vista/Server 2012/Server 2008” on

page 21, “Windows XP” on page 24, or “Windows Server 2003” on page 27.

If a Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 print server exists

On the server, set the printer to connect and turn it into a shared printer. Your clients can then print to this shared printer.

Printing from Mac OS

Mac OS X 10.5 or later

❏ Bonjour

Features of the Printing Methods

This section describes features of the printing methods available for you to choose.

TCP/IP printing

Advantages

❏ No computer as a network interface is required.

❏ No special utility for Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 is required.

How To 12

Epson Network Guide

❏ You can see the printer status using EPSON Status Monitor.

❏ You can print via a router.

Disadvantages

❏ You need to set up TCP/IP.

Installing Components on Your Computer

About Installing Components on Your Computer

Before configuring the network interface and printing from the computer, you need to install the necessary components (such as TCP/IP) and assign an IP address and subnet mask for your computer, depending on the printing method you want to use. See the section in this chapter appropriate for your operating system.

Note:

The Windows operating system disk may be required during the installation.

When using TCP/IP for printing, you need to set the IP address, the subnet mask, and the default

gateway of the computer.

Windows 8.1/8/7/Vista/Server 2012/Server 2008

Use the following procedure to install the necessary components.

1. Open the Control Panel, and then click View network status and tasks or double-click

Network and Sharing Center

.

2. Click Ethernet (Windows 8.1/8/Server 2012), Local Area Connection (Windows 7), or View

Status

(Windows Vista/Server 2008), and then click the Properties button.

Note:

If the User Account Control screen appears, click the Yes or Continue button.

How To 13

3. Check if the following necessary components are in the list.

Epson Network Guide

The following table lists the components required for configuring the network interface with

EpsonNet Config.

EpsonNet Config’s setting screens

TCP/IP, WSD, UPnP, Bonjour

Necessary components

Internet Protocol (TCP/IP IPv4) or Internet Protocol (TCP/IP

IPv6)

The following table lists the components required for network printing.

Printing method

TCP/IP printing

Necessary components

Internet Protocol (TCP/IP IPv4) or Internet Protocol (TCP/IP

IPv6)

4. Double-click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/

IPv6)

on the Local Area Connection Properties dialog box to open the properties dialog box. Set the IP address, the subnet mask, etc. and then click OK.

5. Restart the computer.

The necessary components are now installed. Go to the section “Setting Up the Network Interface” on page 18.

How To 14

Epson Network Guide

Windows XP

For Windows XP, use the following procedure to install the necessary components.

1. Click Start, highlight Control Panel, and then click Network and Internet Connections.

Select Network Connections.

2. Under LAN or High-Speed Internet, click the Local Area Connection icon.

3. Under Network Tasks, click Change settings of this connection.

4. Check if the following necessary components are in the list.

The following table lists the components required for configuring the network interface with

EpsonNet Config.

EpsonNet Config’s setting screens

TCP/IP, WSD, UPnP, Bonjour

Necessary components

Internet Protocol (TCP/IP)

The following table lists the components required for network printing.

Printing method

TCP/IP printing

Necessary components

Internet Protocol (TCP/IP)

How To 15

Epson Network Guide

5. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK.

6. Restart the computer.

The necessary components are now installed. Go to the section “Setting Up the Network Interface” on page 18.

Windows Server 2003

For Windows Server 2003, use the following procedure to install the necessary components.

1. Click Start, point to Control Panel, and then select Network Connections. Click Local Area

Connections

.

2. Click the Properties button.

3. Check if the following necessary components are in the list.

The following table lists the components required for configuring the network interface with

EpsonNet Config.

How To 16

Epson Network Guide

EpsonNet Config’s setting screens

TCP/IP, WSD, UPnP, Bonjour

Necessary components

Internet Protocol (TCP/IP)

The following table lists the components required for network printing.

Printing method

TCP/IP printing

Necessary components

Internet Protocol (TCP/IP)

4. Double-click Internet Protocol (TCP/IP) on the Local Area Connection Properties dialog box to open the Internet Protocols (TCP/IP) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK.

5. Restart the computer.

The necessary components are now installed. Go to the section “Setting Up the Network Interface” on page 18.

Mac OS

To assign an IP address, subnet mask, etc. to your Mac OS, follow the steps below.

1. From the Apple menu, select System Preferences.

2. Open the Network control panel. Click the TCP/IP tab.

Note:

For Mac OS X 10.5 or later, select Ethernet as the connecting method on the Network control panel, select the method to assign the IP address from the Configure menu, and then assign the IP address.

3. Select Built-in Ethernet from the Show pull-down menu.

4. Assign an IP address and other settings if necessary.

5. Click the Apply Now button to save any changes.

Go to the section “Setting Up the Network Interface” on page 18.

How To 17

Epson Network Guide

Setting Up the Network Interface

Connecting the Network Interface to the Network

Follow the instructions below to connect the network interface to the network.

1. Make sure that your printer is turned off.

2. Connect one end of the network cable to the RJ-45 connector on the network interface, and the other end to the network.

c

Important:

You must use the following shielded twisted-pair cable to connect the network interface to

a network.

-- Category-5 or higher for the 10Base-T or 100Base-TX connection

-- Category-6 or higher for the 1000Base-T connection

Do not connect the network interface and the computer directly. Be sure to use a HUB to

connect the network interface to the network.

Note:

You can use 10Base-T, 100Base-TX, and 1000Base-T Ethernet. When you print a lot of data, we recommend you use a higher-speed with light network traffic.

3. Turn on your printer. After the status lights go off, print a network status sheet.

c

Important:

After turning off the printer, wait until the status lights go off before turning it back on; otherwise the network interface may not work correctly.

Note for Mac OS X 10.5 or later:

Since the printer supports Bonjour and is on by default, you can use the printer on a network just by connecting it to the network. If you want to disable the Bonjour setting, use the printer’s control

panel. See “Setting an IP Address on the Printer’s Control Panel” on page 50 for details.

Now, you can configure the network interface to use on the TCP/IP network and also install the printer driver using the Software Disc shipped with your printer.

If you are using Windows, see “Configuring the Network Interface (For Windows Users)” on page 19.

How To 18

Epson Network Guide

If you are using Mac OS, see “Configuring the Network Interface (For Mac OS Users)” on page 19.

Configuring the Network Interface (For Windows Users)

Configure the network interface for use on the TCP/IP network and install the printer driver on your computer.

1. Make sure your printer is connected to the network (a hub or router).

2. Insert the Software Disc into the CD/DVD drive.

3. The Epson Install Navi screen opens automatically.

If the Epson Install Navi screen does not appear, double-click InstallNavi.exe on the Software

Disc.

4. Select the I agree to the contents of the License Agreement check box and then click the Next button.

5. The Software Select screen appears. To print via a network, make sure to select the Epson Driver

and Utilities

check box and Epson Network Utilities check box, then click the Install button.

Note:

If your printer is connected to your computer with a USB cable, clear the Epson Network Utilities check box.

6. Software installation starts. Follow the on-screen instructions to complete the installation.

Configuring the Network Interface (For Mac OS Users)

Configure the network interface for use on the TCP/IP network and install the printer driver on your computer.

1. Make sure your printer is connected to the network (a hub or router).

2. Insert the Software Disc into the CD/DVD drive.

EPSON

folder opens automatically.

How To 19

Epson Network Guide

3. Double-click the Install Navi icon in the EPSON folder.

The Epson Install Navi screen opens.

4. Enter your user name and password in the authentication screen.

5. Select the I agree to the contents of the License Agreement check box and then click the Next button.

6. The Software Select screen appears. To print via a network, make sure to select the Epson Driver

and Utilities

check box and Epson Network Utilities check box, then click the Install button.

Note:

If your printer is connected to your computer with a USB cable, clear the Epson Network Utilities check box.

7. Software installation starts. Follow the on-screen instructions to complete the installation.

Setting Up the Printer

Mac OS X 10.5 or later

1. Open System Preferences.

2. Open Print & Fax.

3. Click the + button to add a new printer.

4. Select the desired printer model that is connected with Bonjour.

Note:

If your printer is not displayed with the desired connection, click More Printers, select the desired connection from the drop down list, and then select the printer model.

5. Click Add.

Now you can use the printer on the TCP/IP network.

Note:

If your product supports the scanning function, see the product’s User’s Guide to make the settings.

How To 20

Epson Network Guide

Installing the Printer Driver

About Installing the Printer Driver

To print to the network printer, you need to install the printer driver on the computer. The following section explains how to instal the printer driver manually. See the section in this chapter appropriate for your operating system.

Windows 8.1/8/7/Vista/Server 2012/Server 2008

The printer driver installation procedure differs depending on the printing method you prefer.

TCP/IP printing

Note:

If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on page 38 for details. Note that EpsonNet Print does not support IPv6 environment.

1. Open the Control Panel, and then View devices and printers (Windows 8.1/8/7/Server 2012) or Printers (Windows Vista/Server 2008).

2. Click Add a printer to start the Add Printer wizard.

3. Click Add a local printer.

How To 21

Epson Network Guide

4. Select the Create a new port radio button, and then select Standard TCP/IP Port from the list.

Then click Next.

5. Enter the IP address of the network interface and then click Next.

How To 22

Epson Network Guide

6. If an error occurs, the following dialog box appears. Select the Standard radio button and then select EPSON Network Printer. Click Next.

7. Click Finish.

8. See “Installing a printer driver” on page 23 to install the printer driver.

Installing a printer driver

1. Insert the Software Disc shipped with the device.

2. Close the Epson Install Navi screen if it appears.

3. On the Add Printer screen, click the Have Disk button. The Install From Disk dialog box appears.

4. Click Browse.

5. Select the CD/DVD drive for Drives, and double-click the WINX64 folder or the WINX86 folder depending on your operating system. Click Open.

6. Click OK in the Install From Disk dialog box.

7. Select the model name of the device, and then click Next.

Note:

If the Add Printer wizard prompts you to select either Keep existing driver or Replace existing

driver

, be sure to select the Replace existing driver radio button.

8. Click Finish and follow the on-screen instructions to complete the setup.

How To 23

Epson Network Guide

Windows XP

The printer driver installation procedure differs depending on the printing method you prefer.

TCP/IP printing

Note:

If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on page 38 for details.

1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers

and Faxes

.

2. Under Printer Tasks, click Add a printer to start the Add Printer wizard, and then click Next.

3. Click Local printer attached to this computer, clear the Automatically detect and install

my Plug and Play printer

check box, and then click Next.

Note:

You must clear the Automatically detect and install my Plug and Play printer check box because the printer is attached directly to the network, not to a Windows XP computer.

How To 24

Epson Network Guide

4. Select the Create a new port radio button, and then select Standard TCP/IP Port from the list.

Then click Next.

5. Enter the IP address of the network interface and then click Next.

How To 25

Epson Network Guide

6. If an error occurs, the following dialog box appears. Select the Standard radio button and then select EPSON Network Printer. Click Next.

7. Click Finish.

8. See “Installing a printer driver” on page 26 to install the printer driver.

Installing a printer driver

1. Insert the Software Disc shipped with the printer.

2. Close the Epson Install Navi screen if it appears.

3. On the Add Printer screen, click the Have Disk button. The Install From Disk dialog box appears.

4. Click Browse.

5. Select the CD/DVD drive for Drives, and double-click the WINX64 or WINX86 folder. Click

Open

.

6. Click OK in the Install From Disk dialog box.

7. Select the model name of the printer, and then click Next.

Note:

If the Add Printer wizard prompts you to select either Keep existing driver or Replace existing

driver

, be sure to select the Replace existing driver radio button.

How To 26

Epson Network Guide

8. Click Finish and follow the on-screen instructions to complete the setup.

Windows Server 2003

The printer driver installation procedure differs depending on the printing method you prefer.

TCP/IP printing

Note:

If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on page 38 for details.

1. Click Start, and then select Printers and Faxes.

2. Double-click the Add Printer icon to start the Add Printer wizard, and then click Next.

3. Click Local printer attached to this computer, clear the Automatically detect and install

my Plug and Play printer

check box, and then click Next.

Note:

You must clear the Automatically detect and install my Plug and Play printer check box because the printer is attached directly to the network, not to a computer.

How To 27

Epson Network Guide

4. Select the Create a new port radio button, and then select Standard TCP/IP Port from the list.

Click Next.

5. When Add Standard TCP/IP Printer Port Wizard dialog box appears, click Next.

6. Enter the IP address of the network interface and then click Next.

How To 28

Epson Network Guide

7. If an error occurs, the following dialog box appears. Select the Standard radio button and then select EPSON Network Printer. Click Next.

8. Click Finish.

9. See “Installing a printer driver” on page 29 to install the printer driver.

Installing a printer driver

1. Insert the Software Disc shipped with the printer.

2. Close the Epson Install Navi screen if it appears.

3. On the Add Printer screen, click the Have Disk button. The Install From Disk dialog box appears.

4. Click Browse.

5. Select the CD/DVD drive for Drives, and double-click the WINX64 or WINX86 folder. Click

Open

.

6. Click OK in the Install From Disk dialog box.

7. Select the model name of the printer, and then click Next.

Note:

If the Add Printer wizard prompts you to select either Keep existing driver or Replace existing

driver

, be sure to select the Replace existing driver radio button.

How To 29

Epson Network Guide

8. Click Finish and then follow the on-screen instructions to complete the setup.

Mac OS

Follow the steps below to set a printer.

Note:

Make sure that the printer driver is installed on your Mac OS before following the steps below. See the manual shipped with your printer for instruction on how to install the printer driver.

Mac OS X 10.5 or later

Bonjour printing

1. Open System Preferences.

2. Open Print & Fax.

3. Click the + button to add a new printer.

4. Select the desired printer model that is connected with Bonjour.

5. Click Add.

TCP/IP printing

1. Open System Preferences.

2. Open Print & Fax.

3. Click the + button to add a new printer.

4. Click IP.

5. Select the desired printing protocol from the pull-down list.

6. Enter the host name or IP address of the printer.

7. Select the desired printer model.

8. Click Add.

How To 30

Epson Network Guide

Chapter 3

Network Software

This chapter explains how to use the network software provided with your printer.

Note:

The software provided varies depending on your printer model.

EpsonNet Config for Windows

About EpsonNet Config

EpsonNet Config is a Windows-based configuration software for administrators to configure the network interface for TCP/IP.

Note:

Be sure to use EpsonNet Config included on the Software Disc shipped with this product.

System Requirements

The following table lists the system requirements of EpsonNet Config.

Operating systems

Hard disk drive space

Windows 8.1

Windows 8

Windows 7

Windows Vista

Windows XP Professional/Home Edition

Windows Server 2012

Windows Server 2008/Windows Server 2008 R2

Windows Server 2003/Windows Server 2003 R2

30 MB

Network Software 31

Epson Network Guide

Installing EpsonNet Config

You can install EpsonNet Config on your computer from the Software Disc that comes with your printer. Insert the Software Disc in the CD/DVD drive, select EpsonNet Config on the Software

Select screen.

Note:

Log on to the operating system with an administrator account to install EpsonNet Config.

If you add or delete protocols or services from your operating system after installing EpsonNet Config,

EpsonNet Config may not work correctly. If this happens, uninstall EpsonNet Config and then install it again.

If the Windows Security Alert window appears after you start EpsonNet Config, click the Allow

access

or Unblock button; otherwise the devices are not listed on the screen of EpsonNet Config.

Accessing the EpsonNet Config User’s Guide

The EpsonNet Config User’s Guide contains detailed information on EpsonNet Config. Follow the steps below to access the EpsonNet Config User’s Guide.

1. Click Start, point to All Programs, select EpsonNet, and then select EpsonNet Config V4.

2. Click EpsonNet Config User’s Guide.

The EpsonNet Config User’s Guide appears. By clicking the links on the front page or contents page, you can get information on using EpsonNet Config.

EpsonNet Config for Mac OS

About EpsonNet Config

EpsonNet Config for Mac OS is a Mac OS-based configuration software for administrators that allows you to configure the network interface for TCP/IP.

Note:

Be sure to use EpsonNet Config included on the Software Disc shipped with this product.

Network Software 32

Epson Network Guide

System Requirements

The following table lists the system requirements of EpsonNet Config.

Operating systems

Hard disk drive space

Mac OS 10.5 or higher

30 MB

Installing EpsonNet Config

You can install EpsonNet Config on your computer from the Software Disc that comes with your printer. Insert the Software Disc in the CD/DVD drive, select EpsonNet Config on the Software

Select screen.

Accessing the EpsonNet Config User’s Guide

The EpsonNet Config User’s Guide contains detailed information on EpsonNet Config. Follow the steps below to access the EpsonNet Config User’s Guide.

1. Start the Finder.

2. In the Applications folder, double-click the EpsonNet folder, and then double-click the

EpsonNet Config V4

folder. Finally, double-click the EpsonNet Config icon.

EpsonNet Config starts.

3. From the Help menu, select EpsonNet Config Help.

The EpsonNet Config User’s Guide appears. By clicking the links on the front page or contents page, you can get information on using EpsonNet Config.

EpsonNet Config with Web Browser

About EpsonNet Config

EpsonNet Config with Web Browser is a Web-based utility designed to configure the printer for use on a network.

Network Software 33

Epson Network Guide

By typing the IP address of the network interface for the URL in your browser, you can start EpsonNet

Config to allow you to configure the network interface for TCP/IP and SNMP.

Supported Web browser

❏ Microsoft Internet Explorer version 6.0 SP3 or later

❏ Apple Safari 3 or later

❏ Mozilla Firefox version 3.6 or later

Configuring the Network Interface Using EpsonNet Config with Web Browser

After you have assigned an IP address to the network interface using EpsonNet Setup, EpsonNet

Config for Windows or Mac OS, or the arp/ping command, you can configure the network interface using EpsonNet Config with Web Browser.

Note:

A Web browser must be installed on your computer.

TCP/IP must be correctly set for the computer and the network interface.

Do not run both EpsonNet Config for Windows or Mac OS and EpsonNet Config with Web Browser

at the same time.

Your browser may restrict some characters you can use. For details, see your browser or operating

system documentation.

The following procedure shows an example of configuring the network interface on a TCP/IP IPv4 network.

1. Turn on your printer.

2. Run EpsonNet Config using one of the following ways.

❏ Run EpsonNet Config for Windows or Mac OS. Select the printer you want to configure from the list and then click Launch Browser.

❏ Open your browser, and then type in the IP address of the network interface directly. Do not run EpsonNet Config for Windows or Mac OS.

https

://IP address of network interface/

Example: https://192.168.100.201/

Network Software 34

Epson Network Guide

Note:

To check the IP address of the network interface, use EpsonNet Config. See “About EpsonNet

Config” on page 31 for Windows users, or see “About EpsonNet Config” on page 32 for Mac OS

users for details.

If Windows security alert screen appears, click Continue to start EpsonNet Config with Web

Browser.

3. Click TCP/IP under Network on the Configuration menu, then click IPv4 Address to display the

TCP/IP IPv4 settings screen.

Note:

If you want to configure a protocol other than TCP/IP, configure the desired settings on

Configuration - Network screen.

4. Select a method for acquiring the IP address. When you select Auto, DHCP becomes available and assigns an IP address automatically. If you want to set the IP address manually, select Manual.

Note:

The network administrator must check any changes made to the IP address settings.

When Auto is selected, DHCP becomes available. To use the DHCP server, make sure it is

installed on your computer and correctly configured. See your operating system’s online help for detailed instructions.

If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private IP address is

automatically assigned to the network interface even when there are no DHCP servers on your system or your network.

If the DNS function is not supported, we recommend that you select Manual and then enter an IP

address. This is because if you select Auto, the IP address of the network interface changes every time you turn on the printer so that you need to change the printer port setting accordingly.

5. To assign an IP address manually, enter the IP address, the subnet mask, and the default gateway.

Be sure the IP address does not conflict with any other devices on the network.

Note:

If there is a server or a router functioning as a gateway, enter the IP address of the server or the router for the gateway address. If there is no gateway, leave the default values there.

6. If you want to get a private address between 169.254.1.1 and 169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server, leave it at Enable for Set Using Automatic

Private IP Addressing (APIPA)

; otherwise, select Disable.

Network Software 35

Epson Network Guide

7. When setting an IP address using the ping command, select Enable for Set Using PING. Select

Disable

when setting an IP address with EpsonNet Config; this prevents any unexpected change of the IP address.

8. Select Enable for Acquire DNS Server Address Automatically if you want to acquire the DNS server address using the DHCP server.

If you want to enter the DNS server address manually, select Disable and then enter the IP address of the DNS server.

9. Select Enable for Acquire Host Name and Domain Name Automatically if you want to acquire the host name and the domain name using the DHCP server.

If you want to specify manually, enter the host name and the domain name in the text boxes.

10. Select Enable for Register Network Interface Address to DNS Server if you want to register the host name and domain name to the DNS server through the DHCP server that supports

Dynamic DNS.

If you want to register the host name and the domain name directly to the DNS server, select

Enable

for Register Network Interface Address Directly to DNS Server.

11. Mac OS X only:

Select Enable or Disable for Use Bonjour. If you select Enable, enter the Bonjour Name and the

Bonjour Printer Name.

12. Do not exit the Web browser and do not send a job to the printer until this message appears. Follow the on-screen instructions to reset the printer.

Note:

Since the new IP address becomes available after the printer is reset, you need to restart EpsonNet

Config by entering the new IP address.

Only changes on the page where you press the Transmit button take effect.

Opening Screen

Any user can access the opening screen by typing the IP address of the network interface into the address bar of your browser.

Network Software 36

Epson Network Guide

Note:

The item appears only if your printer supports the function, and the name of the item may vary

depending on the model.

See the EpsonNet Config with Web Browser help for details about each item.

Remote Manager

About Remote Manager

Remote Manager is a Web-based utility designed to configure the printer for use on a network.

By typing the IP address of the network interface into the address bar in your browser, you can start

Remote Manager which allows you to configure the network interface for TCP/IP and SNMP.

Supported Web browser

❏ Windows Internet Explorer version 8.0 or later

❏ Apple Safari 4.0.2 or later

❏ Mozilla Firefox version 21.0 or later

Configuring the Network Interface Using Remote Manager

After you have assigned an IP address to the network interface using EpsonNet Setup, EpsonNet

Config for Windows or Mac OS, or the arp/ping command, you can configure the network interface using Remote Manager.

Starting and operating methods for Remote Manager are the same as EpsonNet Config with Web

Browser. See “Configuring the Network Interface Using EpsonNet Config with Web Browser” on page 34 for details.

Network Software 37

Epson Network Guide

EpsonNet Print (For Windows Users)

About EpsonNet Print

EpsonNet Print is a utility program that provides peer to peer printing to Epson printers on the TCP/

IP network.

By using EpsonNet Print, you can find a printer located in the same segment or beyond a router. You can select LPR standard printing, LPR enhanced printing, or High-speed printing.

Note:

EpsonNet Print does not support IPv6 environment.

System Requirements

The following table lists the system requirements of EpsonNet Print.

Operating systems Windows 8.1

Windows 8

Windows 7

Windows Vista (with Service Pack 2 or higher)

Windows XP Home Edition/Professional (with Service Pack 3 or higher)

Windows Server 2012

Windows Server 2008 (with Service Pack 2 or higher)

Windows Server 2008 R2

Windows Server 2003 (with Service Pack 2 or higher)

Installing EpsonNet Print

You can install EpsonNet Print on your computer from the Software Disc that comes with your printer. Insert the Software Disc in the CD/DVD drive, select EpsonNet Print on the Software Select screen.

Network Software 38

Epson Network Guide

For Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 Users

Follow the steps below to add a port using the Add Printer Wizard.

❏ If you want to add a port for a printer with its IP address assigned automatically by the DHCP

server or router, see “Adding a port for a printer assigned with a dynamic IP address” on page 39.

❏ If you want to add a port for a printer with its IP address assigned manually, see “Adding a port for a printer assigned with a static IP address” on page 42.

Note:

Be sure that the computer is connected to the network and TCP/IP is correctly set.

A valid IP address must be assigned to the printer.

Adding a port for a printer assigned with a dynamic IP address

1. For Windows 8.1/8/7/Vista/Server 2012/Server 2008: Open the Control Panel, and then View

devices and printers

(Windows 8.1/8/7/Server 2012), or Printers (Windows Vista/Server

2008). Click Add a printer to start the Add Printer Wizard.

For Windows XP:

Click Start and then Printers and Faxes. Under Printer Tasks, click Add a

printer

to start the Add Printer Wizard. Click Next.

For Windows Server 2003:

Click Start and then Printers and Faxes. Double-click Add Printer in the Printers folder to start the Add Printer Wizard. Click Next.

2. For Windows 8.1/8/7/Vista/Server 2012/Server 2008: Click Add a local printer. Select the

Create a new port

radio button, and then select EpsonNet Print Port from the list. Click

Next

.

Note:

If the Windows Security Alert screen appears, click the Allow access or Unblock button, and then click the Search Again button to search the printers.

For Windows XP/Server 2003:

Click Local printer attached to this computer, clear the

Automatically detect and install my Plug and Play printer

check box, and then click Next.

Select the Create a new port radio button, and then select EpsonNet Print Port from the list.

Click Next.

Network Software 39

Epson Network Guide

Note:

If the Windows Security Alert screen appears, click the Unblock button, and then click the Search

Again

button to search the printers.

3. Select the target printer, and then click Next.

Note:

If the target printer is not in the list, click the Search Again button to search the printers using

new parameters.

Each column can be sorted in ascending or descending order by clicking the column header.

However, Manual Setting is always displayed on the top of the list regardless of sorting.

Network Software 40

Epson Network Guide

If you want to search printers in other segments, click the N/W Settings button. Select the

Specific Network Segments

check box, and then enter the network address and subnet mask of the network segment for the search. Then click the Add button. You can also specify the time before declaring communication error.

4. Confirm the information about the printer’s port you want to configure, and then click Finish.

Network Software 41

Epson Network Guide

Items

Port Type

The port Information

Finish button

Back button

Cancel button

Explanations

The following items are listed in the pull-down menu, and you can select the port type you need.

IP Address (Auto): Configure the port automatically. If the IP address of the printer is acquired automatically and the computer and the printer are in the same segment, you can select this port type.

IP Address (Manual): Use the printer’s IP Address for the port name.

HostName (DNS): Use the printer’s host name registered in the DNS server for the port name.

The following items are displayed:

- Port Name (If the port type is changed, the port name and the host name or IP address are also changed.)

- Printer Model

- Host Name or IP Address

- Protocol

Register the port information to the system and close the Add EpsonNet Print Port

Wizard.

Go back to the printer list window.

Close the Add EpsonNet Print Port Wizard.

The new printer port is created in your computer. To install the printer driver, see “Installing the

Printer Driver” on page 45.

Adding a port for a printer assigned with a static IP address

1. For Windows 8.1/8/7/Vista/Server 2012/Server 2008: Open the Control Panel, and then View

devices and printers

(Windows 8.1/8/7/Server 2012), or Printers (Windows Vista/Server

2008). Click Add a printer to start the Add Printer Wizard.

For Windows XP:

Click Start and then Printers and Faxes. Under Printer Tasks, click Add a

printer

to start the Add Printer Wizard. Click Next.

For Windows Server 2003:

Click Start and then Printers and Faxes. Double-click Add Printer in the Printers folder to start the Add Printer Wizard. Click Next.

2. For Windows 8.1/8/7/Vista/Server 2012/Server 2008: Click Add a local printer. Select the

Create a new port

radio button, and then select EpsonNet Print Port from the list. Click

Next

.

Network Software 42

Epson Network Guide

Note:

If the Windows Security Alert screen appears, click the Allow access or Unblock button, and then click the Search Again button to search the printers.

For Windows XP/Server 2003:

Click Local printer attached to this computer, clear the

Automatically detect and install my Plug and Play printer

check box, and then click Next.

Select the Create a new port radio button, and then select EpsonNet Print Port from the list.

Click Next.

Note:

If the Windows Security Alert screen appears, click the Unblock button, and then click the Search

Again

button to search the printers.

3. Select Manual Setting from the list, and then click Next.

Network Software 43

Epson Network Guide

4. Enter the printer’s name and the port name is automatically entered to the Port Name edit box.

Then click Next.

5. Confirm the information about the printer’s port you want to configure, and then click Finish.

Items

The port Information

Finish button

Back button

Explanations

The following items are displayed:

- Port Name

- Host Name or IP Address

- Protocol

Register the port information to the system and close the Add EpsonNet Print Port

Wizard.

Go back to the printer list window.

Network Software 44

Epson Network Guide

Items

Cancel button

Explanations

Close the Add EpsonNet Print Port Wizard.

The new printer port is created in your computer. To install the printer driver, see “Installing the

Printer Driver” on page 45.

Installing the Printer Driver

Install the printer driver that comes with your printer.

Note:

Some buttons in these steps may be slightly different depending on your operating system.

1. Insert the Software Disc shipped with the printer.

2. Close the Epson Install Navi screen if it appears.

3. On the Add Printer screen, click the Have Disk button. The Install From Disk dialog box appears.

4. Click Browse.

5. Select the CD/DVD drive for Drives, and double-click the appropriate folder for your operating system. Click OK.

6. Click OK in the Install From Disk dialog box.

7. Select the model name of the printer, and then click Next.

Note:

If the Add Printer Wizard asks you to select either Keep existing driver or Replace existing driver, be sure to select the Replace existing driver radio button. Click Next.

8. Click Finish and follow the on-screen instructions to complete the setup.

The printer is now ready for peer-to-peer printing. To configure the printer port, see “Configuring the

Printer Port” on page 45.

Configuring the Printer Port

Follow the steps below to configure the printer port. The printing speed differs depending on your selection.

Network Software 45

Epson Network Guide

1. For Windows 8.1/8/7/Vista/Server 2012/Server 2008:

Open the Control Panel, and then View devices and printers (Windows 8.1/8/7/Server 2012) or Printers (Windows Vista/Server 2008).

For Windows XP/Server 2003:

Click Start and then Printers and Faxes.

2. Right-click the target printer, and then click Properties.

3. Click the Ports tab, and then click the Configure Port button.

4. Make the appropriate settings for the desired port.

LPR enhanced printing:

Select the LPR Printing radio button, and then specify the queue name (up to 32 characters). LPR enhanced printing sends a print job to the target network printer without spooling all of the print data. LPR enhanced printing is faster than LPR standard printing.

LPR standard printing:

Select the Confirm file size check box, and then specify the queue name (up to 32 characters).

Print data is spooled by the computer before being sent to the target network printer.

Note:

When the print data size is 20 MB or more, we recommend that you use LPR enhanced printing.

Network Software 46

Epson Network Guide

High-speed printing:

Select the High-Speed Printing (RAW) radio button. The Epson high-speed printing port sends a print job to the target network printer without spooling all of the print data. High-Speed printing is faster than the other two printing methods.

5. Click OK.

If you select the High-Speed Printing (RAW) radio button and if the printer does not support

High-Speed printing, or if you fail to connect to the printer, an error message appears. Follow the message to remedy the problem.

Network Software 47

Epson Network Guide

Chapter 4

Troubleshooting

General Problems

Cannot configure the network interface or cannot print from the network.

Cause

The printer settings or network settings may be wrong.

What to do

First, check to see if you can print a status sheet, as described in “Printing a Network Status Sheet” on page 49. If you can print a status sheet,

check the network settings; otherwise, set the interface mode of the printer’s control panel to Auto or Option.

Cannot print even if you have assigned the IP address to the computer and the printer.

Cause

You have assigned an IP address to the computer manually, but you assigned the IP address to the printer by Automatic Private IP

Addressing (APIPA).

What to do

Assign the printer’s IP address so that it belongs to the same segment of the computer. Use EpsonNet Config and the printer’s control panel.

Unable to start EpsonNet Config.

Cause

You have added or deleted protocols after installing EpsonNet Config.

What to do

Uninstall EpsonNet Config and then reinstall it. See “Installing

EpsonNet Config” on page 32.

Troubleshooting 48

Epson Network Guide

The message “EpsonNet Config cannot be used because no network is installed.” appears when you start EpsonNet Config.

Cause

TCP/IP is not installed on the computer.

What to do

Install the TCP/IP protocol.

TCP/IP is installed on the computer, but its IP address is not set correctly.

Set a correct IP address for the computer.

Unable to start EpsonNet Config with Web Browser or Remote Manager.

Cause

You have not set the IP address for the network interface.

What to do

Set the IP address for the network interface using EpsonNet Config for

Windows or Mac OS, the printer’s control panel. You can check the IP address on a status sheet. See the EpsonNet Config User’s Guide.

The Model Name and IP Address do not appear in the EpsonNet Config dialog box.

Cause

If the valid IP address is not set, the items indicated in the dialog box mentioned above may not appear.

What to do

Set a valid IP address.

Refresh the status by selecting Refresh from the View menu.

Increase the length of time before a timeout. To do this, select Options from the Tool menu, and then select Timeout. Note that doing so can cause EpsonNet Config to run more slowly.

Printing a Network Status Sheet

Before you start configuring the network interface, be sure to print a network status sheet that contains important information such as the current configuration and the MAC address of the network interface.

For information on printing network status sheets, see the printer User’s Guide.

Troubleshooting 49

Epson Network Guide

Chapter 5

Tips for Administrator

Setting an IP Address on the Printer’s Control Panel

After connecting the printer to the network, you need to set the IP address for the network interface.

For information on using the printer control panel to enter the IP address, subnet mask, and default gateway, see the printer User’s Guide.

Secure Communication Using IPsec, Access Control, SSL, and IEEE 802.1X

Some printers may not support secure communications using IPsec, Access Control, SSL and

IEEE802.1X. For information on whether your printer supports these secure communications features, see the printer User’s Guide.

Data format

Supported operating systems

IPsec

Encrypted data

Windows 8.1/8/7/Vista

Access Control

Unencrypted data

All operating systems supported by this product

IPsec protocol

IPsec is a protocol that is suitable for securing IP communication by encrypting the data or by authenticating client users in a network. To use this function, make the necessary settings on your printer using Remote Manager. Security settings on the client computers on the network are also

required. For more information, see “Secure Communications (IPsec/Access Control)” on page 52.

Access Control

Access control function allows you to restrict network access to the printer.

❏ Restrict access to the printer from specified client users only

Tips for Administrator 50

Epson Network Guide

❏ Restrict data communication to the printer to specified purposes only (such as accessing administrative information by the administrators)

To use this function, make the necessary settings on your printer using Remote Manager. For more

information, see “Secure Communications (IPsec/Access Control)” on page 52.

SSL

SSL prevents unauthorized external access or other malicious acts such as data being read while the product is connected to a network. Enabling SSL allows product settings to be managed securely via a web browser. For more information, see the online help for Remote Manager.

IEEE 802.1X

IEEE 802.1X is the standard protocol for allowing client users to be authenticated to the network before obtaining a connection. It provides effective access control to both wired and wireless networks.

IEEE 802.1X network consists of an authentication server (RADIUS server) and authenticator

(switching hub with authentication function). Supplicants (devices such as printers) can join the IEEE

802.1X network by being authenticated by the authentication server and authenticator.

To print via an IEEE 802.1X network, you have to make the necessary network settings using a computer that is not connected to the IEEE 802.1X network before connecting the printer to the IEEE

802.1X network.

1. Connect the printer and computer, which is not connected to the network, using an Ethernet cable.

2. Assign an IP address to the printer and print the network status sheet to confirm the IP address.

3. Start Remote Manager on the computer and import the digital certificate, then make the IEEE

802.1X settings and other necessary settings.

4. Turn off the printer and disconnect the printer and computer.

5. Connect the printer to the destination IEEE 802.1X network and turn it on, then print the network status sheet to confirm the settings.

For details on the settings, refer to the Remote Manager help.

Tips for Administrator 51

Epson Network Guide

Secure Communications (IPsec/Access Control)

This feature prevents unauthorized external access, spoofing, or other malicious acts such as data theft or falsification while the product is connected to a network.

Enabling IPsec/Access Control allows the following tasks to be performed securely:

❏ Network printing

❏ Managing settings via a web browser

Some printers may not support secure communications using IPsec/Access Control. For information on whether your printer supports these features, see the printer manual. This document provides sample IPsec/Access Control configurations and information on setup and troubleshooting.

Overview and Sample Settings

IPsec and Access Control are configured differently and use different connection types. Review the sample settings and choose a configuration suited to your objectives.

Data format

Supported operating systems

IPsec

Secure (encrypted)

Windows Vista, Windows 7, Windows 8,

Windows 8.1, Windows Server 2008,

Windows Server 2012

Configure both product and client.

Sample 1: Accept IPsec only

Access Control

Not secure (unecrypted)

All operating systems supported by the printer

Configuration

Sample settings

Configure product only.

Sample 2: Accept print data only

Sample 3: Accept specified data types only

Sample 1

The product accepts from the client only data secured using IPsec. Normal data (i.e. data not secured using IPsec) are not accepted.

Sample 2

The product accepts print data from specific clients only. Data from other clients and non-print data from the specified clients are not accepted.

Tips for Administrator 52

Epson Network Guide

Sample 3

The product accepts only specific types of data from specific clients. In this example, security levels are set separately for each client type so that the product accepts all data from administrator clients

(including product management and print data) but only print data from print clients and no data at all from other clients.

Product Security Policies: An Overview

❏ You can create one Default Policy and Group Policy 1-10.

❏ If there is more than one policy, the product will check the policies in order from the top of the display (“Group Policy 1”) and initiate a network connection when it finds a matching policy.

❏ Because the product checks the policies in order from the top, more restrictive policies should precede the more general policies on which they are based.

Configuration Workflow

IPsec requires a client with secure access to the product and configured according to your purposes.

Access Control requires that the product be configured according to your purposes.

The configuration workflow is shown below.

Note:

If your network is already secure, we recommend that you connect the product to a computer on a different network before adjusting settings. There is potential for data theft if the product is connected to a secure network when settings are adjusted. If no other network is available, refer to the “Encrypting communications”, below.

1. Connect the product and the computer that will be used to configure the product to the network.

2. Adjust Remote Manager settings.

See the following page information on Remote Manager settings.

3. Transmit the settings to the printer.

*

4. Adjust client computer security settings (not required for Access Control).

5. Connect the printer to a secure network.

Tips for Administrator 53

Epson Network Guide

* Encrypting communications:

There is potential for data theft if product settings are adjusted over a secure network. If no other network is available, follow the steps below to encrypt the data for transmission.

(1) In the product control panel, select Network Setup > IPsec Setting > Enable and enter the pre-shared key.

(2) Set up IPsec on the computer that will be used to configure the product.

(3) Connect the product and the computer that will be used to configure the product to the network.

c

Important:

The network connection will close if Network Setup > IPsec Setting is enabled in the product control panel and a blank key is entered for PSK Setting (i.e. no pre-shared key is entered). Be sure to enter a key for PSK Setting after enabling Network Setup > IPsec Setting in the product control panel.

Product Security Policies

Start the product Remote Manager from your computer, open the Setup tab, and adjust Security >

IPsec/Access Control

settings for security policies that match how the product will be used.

Note:

We recommend that the product be assigned a static IP address for secure access using IPsec or Access

Control. Settings will be invalidated if the IP address changes.

Sample 1

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default

Policy

settings as follows:

Option

IPsec/Access Control

Default Policy > Access Control

Pre-Shared Key

Setting

Enable

Use IPsec

Enter a key (maximum 127 alphanumeric characters)

Tips for Administrator 54

Epson Network Guide

Sample 2

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Group

Policy

settings for each client.

Refusing Access from Unauthorized Clients

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default

Policy

settings as follows:

Option

IPsec/Access Control

Default Policy > Access Control

Setting

Enable

Access Refuse

Print Client Settings

Separate IPsec/Access Control > Group Policy settings must be created for each of the Service

Name

> RAW (Port 9100), ENPC,

1

and SNMP options as shown in the example below. Group policies are applied in order from Group Policy 1.

Option

Group Policy n (n = 1–10)

Access Control

Remote Address (Host)

2

Setting

RAW (Port 9100) ENPC SNMP

Enable

Access Permission

Enter the print client IP address (prefix length can be used to specify range if desired).

Example (IPv4): 192.168.0.0/24

Method of Choose Port Service Name

Service Name RAW (Port 9100) ENPC SNMP

1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config to find the printer.

2. A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection may terminate when the lease or address expires.

Note:

Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port

Number

.

Tips for Administrator 55

Epson Network Guide

Sample 3

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Group

Policy

settings for each client.

Refusing Access from Unauthorized Clients

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default

Policy

settings as follows:

Option

IPsec/Access Control

Default Policy > Access Control

Setting

Enable

Access Refuse

Administrator Client Settings

Separate settings must be created for each Group Policy in IPsec/Access Control. Group policies are applied in order from Group Policy 1.

Option

Group Policy n (n = 1–10)

Access Control

Setting

Enable

Access Permission

Remote Address (Host)

* Enter the administrator client IP address

* A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection may terminate when the lease or address expires.

Tips for Administrator 56

Epson Network Guide

Print Client Settings

Create separate settings for each of the Service Name > RAW (Port 9100), ENPC,

1

and SNMP options using Setup > Security > IPsec/Access Control > Group policy settings that differ from those used by the administrator. Group policies are applied in order from Group Policy 1; when setting up policies for both administrators and print clients, order the list so that the group policies for administrators precede those for print clients.

Note that EpsonNet Config (Windows/Mac OS) will be unable to detect the printer if separate group policies are not created for the Service Name > ENPC, SNMP options.

Sample settings are shown below.

Option

Group Policy n (n = 1–10)

Setting

RAW (Port 9100)

Enable

ENPC SNMP

Access Control

Remote Address (Host)

2

Access Permission

Enter the print client IP address (prefix length can be used to specify range if desired).

Example (IPv4): 192.168.0.0/24

Service Name Method of Choose Port

Service Name RAW (Port 9100) ENPC SNMP

1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config to find the printer.

2. A static IP address is recommended. If DHCP or “obtain automatically” (IPv6) is selected, the connection may terminate when the lease or address expires.

Note:

Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port

Number

.

Supported Security Methods

The product supports the security methods listed below; choose one of these combinations when selecting the computer security method. In most cases computers can use default IPsec settings.

Tips for Administrator 57

Security method

Authentication algorithm

Encryption algorithm

Key exchange algorithm

Option

SHA-256

SHA-1

MD5

AES-CBC 256

AES-CBC 192

AES-CBC 128

3DES

DES

Elliptic Curve Diffie-Hellman P-384

Elliptic Curve Diffie-Hellman P-256

Diffie-Hellman Group 14

Diffie-Hellman Group 2

Diffie-Hellman Group 1

Epson Network Guide

Tips for Administrator 58

Epson Network Guide

Index

A

Access Control..............................................................50 , 52

SSL..............................................................................9, 50 , 51

E

EpsonNet Config (Mac OS)...............................................32

EpsonNet Config (Web Browser).....................................33

EpsonNet Config (Windows)............................................31

EpsonNet Print....................................................................38

I

IEEE 802.1X..............................................................9, 50 , 51

Installation

EpsonNet Config (Mac OS)............................................33

EpsonNet Config (Windows).........................................32

EpsonNet Print.................................................................38

IP address.............................................................................50

IPsec...........................................................................9, 50 , 52

U

Using the printer with

Mac OS..............................................................................30

Windows 7........................................................................21

Windows 8........................................................................21

Windows Server 2003......................................................27

Windows Server 2008......................................................21

Windows Server 2012......................................................21

Windows Vista.................................................................21

Windows XP.....................................................................24

N

Network status sheet...........................................................49

O

Operating environment........................................................8

P

Protocols.................................................................................8

R

Remote Manager.................................................................37

RJ-45 connector...................................................................10

S

Setting the IP address....................................................34, 50

Index 59

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Fast processing: High-speed printing of Graphics, CAD and GIS applications
  • Large-capacity ink cartridges: A choice of 110, 350 and 700 ml sizes mean a low TCO
  • PrecisionCore TFP printhead: Permanent printheads for duration of printer lifetime
  • UltraChrome XD inks: Produce quality, vibrant, smudge- and water-resistant images
  • PostScript support with 2 x1.6GHz CPUs: Print multiple formats, including data-rich files, quickly and directly

Related manuals

Download PDF

advertisement

Table of contents