Cisco | SPA9000-UK | Datasheet | Cisco IP Telephony System

Cisco IP Telephony System
IP Telephony System
Full Featured IP PBX System
for the Small Business and
Home Office
The SPA9000 marries the rich feature set of
high-end PBX telephone systems with the
convenience and cost advantages of Voice
over IP. It has common voice system
features such as an auto-attendant, shared
line appearances, three way call
conferencing, intercom, music on hold,
call-forwarding and much more. The
SPA9000 opens up access to the benefits of
VoIP, including low cost long distance
service, telephone number portability, and
one network for both voice and data.
The SPA9000 is so easy to configure that a
fully working system can be set up in
minutes. New telephones are
automatically detected and registered
when they are connected to the SPA9000.
The SPA9000 has an integrated web server
that allow features to be configured using a
web browser. The web server has multiple
levels of password protected access to user and service level features. Service level settings
may be locked by the Internet Telephone Service Provider to ensure they are not
inadvertently corrupted. The Internet Telephone Service Provider also can remotely update
the software and settings through a secure encrypted connection.
IP PBX system with high-end
features comparable to
traditional large business voice
Initial support of 4 SIP
compatible IP Phones per
SPA9000 is upgradeable to 16
with an easy to install license
Powerful self-configuration
capabilities enabled with
Linksys IP telephones
Works with most Internet
Telephone Service Providers
With its integrated router, the SPA9000 can be either connected directly to the internet
connection or to another router on your network. The SPA9000 has separate WAN and LAN
Ethernet ports. The WAN connection can be connect through DHCP or a fixed IP address. The
LAN port can assign IP addresses to IP telephones and computers using NAT and DHCP.
While the SPA9000 will work with any SIP compatible IP telephone, it is the ideal host for
Linksys business telephones, such as the SPA901, SPA921, SPA922, SPA941, and SPA942.
Powerful configuration capabilities enable the SPA9000 to support a greater set of advanced
features with these telephones, such as shared line appearances, hunt groups, call transfer,
call parking lot, and group paging. With its two FXS ports, the SPA9000 can support traditional
analog devices such as telephones, answering machines, FAX machines, and media adapters.
The SPA9000 initially supports four (4) SIP compatible IP Phones and is upgradeable to sixteen
(16) IP Phones total per SPA9000 with an easy to install license key upgrade.
Model No.
Model No.
Features when
used with SPA
IP Phones
SIP Application Server, Proxy, Registrar and Location Server (RFC3261)
Multiple Service Provider Lines / SIP Account Support (4)
Shared Line Appearance (SLA)
Automated Attendant (AA)
Configurable AA Answer Delay
Interactive Voice Response (IVR)
Recordable IVR Prompts
Automatic Call Distribution (ACD)
Configurable Call Routing
- Least Cost Routing
- Multiple DID Numbers Per VoIP Line
- Call Routing to Multiple Extensions or Targeted User
- Call Hunting - Sequential, Round Robin, Random
Phone Configuration and Management Server
- Discovery and Configuration of IP Phones
- Assignment of Extension
- Assignment of Dial plan
- Proxy Logging of SIP Messages
- Phone Firmware Upgrade Management
Corporate Directory with Automatic Update
Configuration and Maintenance via Web Interface (Local or Remote
- Status Display of All Connections
Remote Configuration via
- HTTPS with XML Formatted Files
- HTTP or TFTP with 256-Bit Encrypted Binary Files
Call Park - User Definable Parking Space Number
Call Unpark
Call Transfer
Call Forward
Group Paging
Directed Call Pick Up
Group Call Pick Up
Music / Information via Streaming Audio Server (SAS) for Calls:
- On Hold
- Parked in the Parking Lot
- Being Transferred
Simultaneous Ringing (Find Me Service)
Do Not Disturb
Voice Mail Integration - Service Provider Based
- Voice Mail Notification via SUBSCRIBE / NOTIFY
- Forward Call Directly to Voice mail
Integrated Media Proxy or Direct RTP Routing to ITSP
Differentiated Services (DiffServ) / Type of Service (TOS) Support
Two FXS Ports for Phones, Fax machines, Media Adapters
Voice encoding according to G.711 (64kbit/s)
Fax Support using G.711 Pass-Through or T.38
Echo Cancellation (G.165)
Line Status - Active Line Indication, Name/Number
Digits Dialed with Number Auto-Completion
Call Hold
Call Waiting
Call Transfer - Attended and Blind
Call Conferencing
Automatic Redial
Call Pick Up - Selective and Group **
Call Swap
Call Forwarding - Unconditional, No Answer, On Busy
Model No.
Hot Line and Warm Line Automatic Calling
Call Log (60 entries each): Made, Answered, Missed Calls
Personal Directory with Auto-dial (100 entries)
Do Not Disturb
URI (IP) Dialing Support (Vanity Numbers)
On Hook Default Audio Configuration (Hands Free/Headset)
Multiple Ring Tones with Selectable Default Ring Tone per Line
Called Number with Directory Name Matching
Calling Number with Name - Directory Matching or via Caller ID
Subsequent Incoming Calls with Calling Name and Number
Date and Time with Intelligent Daylight Savings Support
Call Duration with Call Time Stamp Stored in Call Logs
Name/Identity (Text) Display at Start Up
Distinctive Ringing Based on Calling and Called Number
User Downloadable Ring Tones and Ring Tone Generator (Free from
Download on Demand Ring Tones - 10
Speed Dial Support
Configurable Dial/Numbering Plan Support - per Line
DNS SRV and Multiple A Records for Proxy Lookup and Proxy Redundancy
Syslog, Debug, Report Generation and Event Logging
Secure Call Encrypted Voice Communication Support
Built-in Web Server for Admin and Config with Multiple Security Levels
Automated Provisioning, Multiple Schemes-Up to 256 Bit Encryption: (HTTP, HTTPS, TFTP)
Require Admin Password to Reset Unit to factory Defaults Option
** Service feature availability is call feature server platform dependent.
SPA9000 upgrade license to support 16 IP Phones: SPA9000UPG.
• FCC (Part 15 Class B), CE, A-Tick, ICES-003
• Password Protected System Reset to Factory Default
• Password Protected Admin and User Access Authority
• HTTPS with Factory Installed Client Certificate
• HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
• Up to 256-bit AES Encryption
Package Contents
• Power, Internet, Phone 1, Phone 2
• Quick Installation and Configuration Guide, User Guide, Administration Guide - Service Providers Only, Provisioning
Guide - Service Providers Only
• 1 - SPA9000 System
• 1 - 5 Volt Power Adapter
• 1 - RJ45 Ethernet Cable
• 1 - Quick Installation
Unit Weight
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
3.98 x 3.98 x 1.1 in (101 x 101 x 28 mm) W x H x D
5.3 oz (0.15 kg)
Switching Type (100-240v) Automatic, DC Input Voltage: +5 VDC at 2.0 A Max.,
Power Consumption: 5 Watts, Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
32º~113ºF (0º~45ºC)
-13º~185ºF (-25º~85ºC)
10~90% Non-condensing
10~90% Non-Condensing
Model No.
Data Networking
Voice Gateway
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
Administration &
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional
Offices throughout the world. For a complete list
of local Linksys Sales and Technical Support
contacts, visit our Worldwide Web Site at
Specifications are subject to change without
notice. Linksys is a registered trademark or
trademark of Cisco Systems, Inc. and/or its
affiliates in the U.S. and certain other countries.
Copyright © 2006 Cisco Systems, Inc. All rights
reserved. Other brands and product names are
trademarks or registered trademarks of their
respective holders.
SPA9000v2-DS- 60613B DF
Physical Interfaces:
Subscriber Line
Interface Circuit
Note: Many specifications are programmable within a defined range or list of options.
Please see the SPA Administration Guide for details. The target configuration profile is uploaded to the SPA9000 at the time of provisioning.
MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
DHCP Server - Dynamic Host Configuration Protocol (RFC 2131)
PPoE Client - Point to Point Protocol over Ethernet (RFC 2516)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
VLAN Tagging - 802.1p/q
SNTP - Simple Network Time Protocol (RFC 2030)
Upload Data Rate Limiting - Static and Automatic
QoS - Voice Packet Prioritization over Other Packet Types
Router or Bridge Mode of Operation
MAC Address Cloning
Port Forwarding
SIPv2 - Session Initiation Protocol Version 2 (RFC 3261, 3262, 3263, 3264)
SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks - NAT (incl. STUN)
Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
Codec Name Assignment
Voice Algorithms:
- G.711 (A-law and µ-law)
- G.726 (16/24/32/40 kbps)
- G.729 A
- G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic Payload Support
Adjustable Audio Frames Per Packet
DTMF: In-band & Out-of-Band (RFC 2833) (SIP INFO)
Flexible Dial Plan Support with Inter-Digit Timers
IP Address / URI Dialing Support
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
VAD - Voice Activity Detection w/ Silence Suppression
Attenuation / Gain Adjustments
MWI - Message Waiting Indicator Tones
Caller ID Support (Name & Number)
Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration of Select Networking Parameters via IVR
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable
2 10/100BaseT RJ-45 Ethernet Port (IEEE 802.3) -- 1 WAN, 1 LAN
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)
Ring Voltage: 40-55 VRMS Configurable
Ring Frequency: 10 Hz - 40 Hz
Ring Waveform: Trapezoidal and Sinusoidal
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL, Off-hook
current: 25 mA min, Terminating Impedance: 8 Configurable Settings including
North America 600 ohms, European CTR21Switching Type (100-240v) Automatic
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF