GX Works2 Installation Instructions

GX Works2 Installation Instructions
Installation Instructions
Notice
• Reprinting or reproducing the part or all of the contents of this
document in any form for any purpose without the permission
of Mitsubishi Electric Corporation is strictly forbidden.
• Although we have made the utmost effort to follow the
revisions of the software and hardware, in some cases,
unsynchronized matter may occur.
• The information in this document may be subject to change
without notice.
■ Introduction
Thank you for purchasing MITSUBISHI Integrated FA Software,
MELSOFT series.
This document explains how to install and uninstall GX Works2
(SW1DNC-GXW2-E ). Please read carefully before installing
the product to your personal computer.
Installation
Install GX Works2 to the personal computer.
■ Confirm before installation
• Log on to the personal computer as an administrator.
• Close all the applications running under Microsoft® Windows® Operating System before installation. If the product is installed while
other applications are running, it may not operate normally.
1.
2.
Insert the CD-ROM (Disc 1) to the CD-ROM drive. Double click the "setup.exe" file on the CD-ROM (Disc 1).
Following the on-screen instructions, select or enter the necessary information.
Point
• Product ID is written on the "License certificate" included with the product. Enter the 12-digit number divided into 3 and 9 digits.
• For precautions on installation, refer to GX Works2 Version 1 Operating Manual (Common).
■ Operating Environment
Item
Personal computer
Precautions
Contents
Windows® supported personal computer
CPU
Intel®CoreTM2 Duo Processor 2GHz or more recommended
Required
memory
1GB or more recommended
Available hard disk
capacity
Disk drive
Monitor
OS
(English version)
Communication
interface*2
When installing GX Works2: HDD available capacity is 2.5GB
or more.
When operating GX Works2: Virtual memory available
capacity is 512MB or more.
CD-ROM supported disk drive
Resolution 1024 x 768 pixels or higher
Microsoft® Windows® 10 Home Operating System
Microsoft® Windows® 10 Pro Operating System
Microsoft® Windows® 10 Enterprise Operating System
Microsoft® Windows® 10 Education Operating System
Microsoft® Windows® 8.1 Operating System
Microsoft® Windows® 8.1 Pro Operating System
Microsoft® Windows® 8.1 Enterprise Operating System
Microsoft® Windows® 8 Operating System
Microsoft® Windows® 8 Pro Operating System
Microsoft® Windows® 8 Enterprise Operating System
Microsoft® Windows® 7 Starter Operating System
Microsoft® Windows® 7 Home Premium Operating System
Microsoft® Windows® 7 Professional Operating System
Microsoft® Windows® 7 Ultimate Operating System
Microsoft® Windows® 7 Enterprise Operating System
Microsoft® Windows Vista® Home Basic Operating System*1
Microsoft® Windows Vista® Home Premium Operating System*1
Microsoft® Windows Vista® Business Operating System*1
Microsoft® Windows Vista® Ultimate Operating System*1
Microsoft® Windows Vista® Enterprise Operating System*1
Microsoft® Windows® XP Professional, Service Pack 2 or later*1
Microsoft® Windows® XP Home Edition, Service Pack 2 or later
Microsoft® Windows® 2000 Professional, Service Pack 4 or later
RS-232 port
USB port
Ethernet port
• If .NET Framework 2.0 and Windows Installer 3.0 are not installed to the personal
computer to which GX Works2 is to be installed, approximately 350MB of memory
is required in the system drive to install them.
• For Windows® 8, Windows® 8.1, and Windows® 10, if .NET Framework 3.5
(including .NET 2.0 and 3.0) is invalid on the personal computer to which GX
Works2 is to be installed, it needs to be valid.
• When the following functions are used, this product may not run properly.
•
•
•
•
•
•
•
•
•
Application start-up in Windows® compatibility mode.
Fast user switching
Remote desktop
Windows XP Mode
Windows Touch or Touch
Modern UI
Client Hyper-V
Virtual desktops
Tablet mode
• In the following cases, the screen of this product may not work properly.
• The size of the text and/or other items on the screen are changed to values
other than default values (such as 96 DPI, 100%, and 9 pt).
• The resolution of the screen is changed in operation.
• The multi-display is set.
• Use the product as a user having a privilege higher than 'Standard user' or
'Administrator' for Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, and
Windows® 10.
• For a personal computer with less than 1GB of memory, the startup speed of GX
Works2 may be improved by increasing the memory to more than 1GB.
*1 : 64-bit version is not supported.
*2 : When a programmable controller CPU is directly connected.
GXW2-VER1-O-IN-E
■ Packing List
Acknowledgements
Model name
Product name
GX Works2 CD-ROM
SW1DNC-GXW2-E
(English version package)
(Standard license product)
(Volume license product)
3
Installation Instructions
(This document)
End-user software license agreement
Software registration notice
License certificate
GX Works2 CD-ROM
SW1DNC-GXW2-EA
(English version package)
Quantity
*1
1
1
1
1
• We do not guarantee those commercially available Microsoft® Windows® Operating
System products that are introduced in this manual.
• This software's copyright is owned by Mitsubishi Electric Corporation.
• This product (including manual) can be used under the Software License
Agreement only.
• We do not take any responsibilities for the consequences of operating this product
(including manual).
3*1
Installation Instructions
(This document)
End-user software license agreement
Software registration notice
1
1
1
n*2
License certificate
*1 : Applications on the CD-ROM
Disc
Disc 1
Disc 2
Disc 3
Application
GX Works2
GX Developer
GX Works2 Help
(for FXCPU)
CPU module Logging
Configuration Tool
Location of "setup.exe"
Disc 1
GXD1 folder
DocFX folder
LLUTL folder
*2 : Number of licenses
Installation of USB driver
In order to communicate with a programmable controller CPU via USB, a USB driver needs to be installed.
For a USB driver installation procedure, refer to GX Works2 Version 1 Operating Manual (Common).
Uninstallation
Delete GX Works2 from the personal computer.
1.
Uninstall GX Works2 from the control panel of Windows®.
Microsoft, Windows, Windows Vista, and Windows XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
Intel is either registered trademarks or trademarks of Intel Corporation in the United States and/or other countries.
The company names, system names and product names mentioned in this manual are either registered trademarks or trademarks of their respective companies.
In some cases, trademark symbols such as 'TM' or '®' are not specified in this manual.
BCN-P5713-N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement