Industrial PS3110-S10 2.5” SATA SSD
Industrial PS3110-S10 2.5” SATA SSD
Phison’s 2.5” SATA Solid State Disk (SSD) delivers all the advantages of flash disk
technology with Serial ATA III interface, including being fully compliant with standard
2.5-inch form factor. The device is designed based on the standard 7-pin interface for
data segment and 15-pin for power segment, as well as operating at a maximum
operating frequency of 300MHz with 30MHz external crystal. Its capacity could provide
a wide range up to 2TB for MLC application; reach up to 550MB/s read as well as
530MB/s write high performance based on Toshiba’s 1Xnm MLC flash.
Product Specification and Features
Capacity
64GB up to 2TB
SATA Interface
SATA Revision 3.2
SATA 1.5Gbps, 3Gbps, and 6Gbps interface
Flash Interface and Support
Flash type:24nm SLC, 15nm MLC/ Pseudo SLC , 3D TLC
1pcs to 16pcs TSOP/BGA flash
Performance (Max)
Read/Write: Up to 550/530 MB/s
IOPS: Up to 92K/90K
Power ConsumptionNote1
Active mode: < 5,500mW
Idle mode: < 450mW
TBW (Terabytes Written) Note1
4,114 TBW for 2TB MLC; 10,273 TBW for 256GB SLC
MTBF
≧ 2,000,000 hours
Advanced Technology
Default: SMART ECCTM(RAID ECC), SmartRefreshTM,
End to End Data Path Protection
Optional: GuaranteeFlushTM, SmartFlushTM
Specific
Thermal Sensor
Support
Feature
AES 256bit
Optional
HW Write protect
Optional
Quick/ Destroy/ Military Erase
Optional
pFail Protection Circuit
Optional
Operating Temperature
Silver grade: 0°C ~ 70°C ; Diamond grade: -40°C ~ 85°C
Environment
Storage Temperature: -40°C ~ 85°C
Vibration: 80Hz~2000Hz@20G
Mechanism Shock (operation/ non-operating): 1500G@0.5ms
RoHS and Halogen Free compliant
Support
Physical Dimension

100.00mm (L) x 69.85mm (W) x 7.00mm (H)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising