DS-MP-150 - Highlite

DS-MP-150 - Highlite
DS-MP-150
ORDERCODE D1230
Congratulations!
You have bought a great, innovative product from DAP Audio.
The DAP Audio DS-MP-150 brings excitement to any venue. Whether you want simple plug-&-play action
or a sophisticated show, this product provides the effect you need.
You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [email protected]
You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !
Thank you!
Dap Audio
Dap Audio DS-MP-150™ Product Guide
Warning.................................................................................…...……………..…………..………………….………....…2
Unpacking Instructions………………………………………………………………………………………………...…..2
Safety-instructions………………………………………………………………………………………………………..…2
Operating Determinations.…………………………………………………………………………………………….....3
Return Procedure....................................................................................................................................................4
Claims.......................................................................................................................................................................4
Description....................................................................................................................................................................5
Overview..................................................................................................................................................................5
Deck.........................................................................................................................................................................6
Mixer.........................................................................................................................................................................7
Frontside...................................................................................................................................................................8
Backside...................................................................................................................................................................8
Installation....................................................................................................................................................................8
Set Up and Operation.................................................................................................................................................8
Names and functions..................................................................................................................................................9
Deck functions........................................................................................................................................................9
Mixer functions........................................................................................................................................................10
Front functions........................................................................................................................................................11
Back functions........................................................................................................................................................11
Operations...................................................................................................................................................................11
Selecting tracks using the folder select encoder..............................................................................................11
Selecting folders.....................................................................................................................................................11
Starting playback...................................................................................................................................................11
Stop playback........................................................................................................................................................11
Pausing....................................................................................................................................................................11
Setting a cue point................................................................................................................................................11
Setting a hot cue point in pause mode..............................................................................................................12
Setting a hot cue point in play mode.................................................................................................................12
Deleting a (hot) cue point....................................................................................................................................12
Cueing.....................................................................................................................................................................12
Frame search..........................................................................................................................................................12
Scanning (fast forward/fast backward).................................................................................................................12
Changing the pitch of the song...........................................................................................................................13
Loop play................................................................................................................................................................13
Software Installation....................................................................................................................................................14
Running the setup program..................................................................................................................................14
Running the Virtual DJ-software for the first time ....................................................................................................17
Interface Zones.......................................................................................................................................................18
Browser Panels.......................................................................................................................................................19
Maintenance...............................................................................................................................................................20
Troubleshooting...........................................................................................................................................................20
Product Specifications...............................................................................................................................................20
1
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• DAP DS-MP-150
• USB cable
• CD with Virtual DJ software
• User manual
WARNING
CAUTION!
Keep this system away from rain and moisture!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this system has to:
be qualified
follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before you initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the system.




Never remove warning or informative labels from the unit.
Never leave any cables lying around.
Do not connect this system to a dimmerpack.
Do not switch the system on and off in short intervals, as this would reduce the system’s life.
2















Do not open the device and do not modify the device.
Do not drive the inputs with a signal level bigger, than required to drive the equipment to full
output.
Only use system indoor, avoid contact with water or other liquids.
Avoid flames and do not put close to flammable liquids or gases.
Make sure you don’t use the wrong kind of cables or defective cables.
When using a power adaptor, make sure that the available voltage is not higher than stated on
the rear panel.
Please turn off the power switch, when changing the power adaptor or signal cable.
Extreme frequency boosts in connection with a high input signal level may lead to overdriving
your equipment. Should this occur, it is necessary to reduce the input signal level by using the gain
control.
To emphasize a frequency range, you don’t necessarily have to move its respective control
upward; try lowering surrounding frequency ranges instead. This way, you avoid causing the next
piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve
(“headroom”)
Avoid ground loops! Always be sure to connect the power amps and the mixing console to the
same electrical circuit to ensure the same phase!
If system is dropped or struck, disconnect the power supply or USB cable immediately. Have a
qualified engineer inspect for safety before operating.
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your system. Leave
the system switched off until it has reached room temperature.
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Dap Audio dealer for
service.
Repairs, servicing and electric connection must be carried out by a qualified technician.
For replacement use fuses of same type and rating only.
OPERATING DETERMINATIONS
This system is not designed for permanent operation. Consistent operation breaks will ensure that the
system will serve you for a long time without defects.
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
3
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [email protected] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
4
Description of the device
Features
The DS-MP-150 is a true midi controller to control your PC like a common audio device.
Just connect the DS-MP-150 with USB to your computer or laptop and you will be able to fully control your
music-files.
Delivery is complete with the award winning Virtual DJ software which is user friendly and quick to learn.
Mixing has never been easier as with the DS-MP-150.
• Touch Jog Wheel
• USB interface
• 3 selectable Jog Modes (Pitch, Search, Scratch)
• Adjustable cross-fader
• Plug & Play functionality
• Including Virtual DJ (Basic) software
Overview
Top
Fig. 1
1. Deck 1
2. Mixer
3. Deck 2
5
Deck
Fig. 2
1) Sync Button
2) Sampler Selector
3) Sampler Play Button
4) Loop Adjustment 1/8 Button
5) Search Button
6) Scratch Button
7) Hot Cue Buttons
8) Cue Button
9) Pause Button
10) Play Button
11) Master Volume Control
12) Master Tempo Button
13) Pitch Button
14) Sampler Volume Control
15) Loop Adjustment 16 Button
16) Pitch Fader
17) Bend - Button
18) Bend + Button
19) Sensor
20) BPM Button
21) Shuttle Wheel
22) PFL Button
23) Effects On Button
24) Effect Selector Button
25) Loop In Button
26) Parameter 1 Control
27) Loop Out Button
28) Parameter 2 Control
29) Sample Display
6
Mixer
Fig. 3
30) Enter/ Folder Select Encoder
31) Load A Button
32) Channel A Gain Control
33) Channel A High Control
34) Channel A Mid Control
35) Channel A Low Control
36) Power LED
37) Channel A Fader
38) Crossfader
39) Folder Out Button
40) Load B Button
41) Channel B Gain Control
42) Channel B High Control
43) Channel B Mid Control
44) Channel B Low Control
45) VU-Meter
46) Channel B Fader
7
Frontside
Fig. 4
47) Crossfader Slope Control
Backside
Fig. 5
48) DC In 5V 1000mA
49) Power Switch
50) USB Connector
Installation
Remove all packing materials from the DS-MP-150. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the back of the device.
You can power the DS-MP-150 either by the USB connector or by an optional DC5V/1A adaptor in case
your computer’s USB interface is not able to provide sufficient power.
Connections
1. Turn off the Power (49) switch.
2. Connect the DS-MP-150 to your computer with a USB cable.
3. If the unit is powered by USB, set the Power (49) switch in USB position, if you use an external power
adaptor, set the Power (49) switch in adaptor position. In order to turn the DS-MP-150 on.
CAUTION: Be sure that the power is off, when connecting the cables.
8
NAMES AND FUNCTIONS
Below is a description of the functions of the controls.
Deck Functions
1. Sync Button:
Automatically matches the corresponding deck’s tempo with the other deck’s tempo.
2. Sampler Selector:
Turn to select a sample indicated by the Sample Display (29). Confirm your choice by pressing the
sample selector.
3. Samper Play Button:
Pressing this button will play the selected sample. Pressing again will stop the sample.
4. Loop Adjustment 1/8 Button:
Allows you to shorten the length of the loop.
5. Search Button:
This button allows you to select or deselect Search Mode for the Shuttle wheel. In Search mode, the
button will light up. If neither Search nor Scratch mode is selected, the shuttle wheel is in Jog mode.
6. Scratch:
This button allows you to select or deselect Scratch Mode for the Shuttle wheel. In Scratch mode, the
button will light up. If neither Search nor Scratch mode is selected, the shuttle wheel is in Jog mode.
7. Hot Cue Buttons:
The DS-MP-150 allows you to store up to three cue points per deck. The Cue buttons allow you to set
the cue points and cueing as described on page 12.
8. Cue Button:
Press the Cue button during playback to return to the position at which playback is started.
9. Pause-button :
Use this button to pause playback.
10. Play-button :
Use this button to start playback.
11. Master Volume Control:
This control allows you to adjust the Master volume level.
12. Master Tempo Button:
If Master tempo is active, the Pitch fader let’s you change the tempo of the song while the Key
of the song remains unchanged.
13. Pitch Button:
Pushing this button enables you to select a Pitch range (6/12/25/100). If the LED in the buttons is not
lit, the range is +/- 6%, if the LED blinks slow, the range is +/- 12%, if the LED blinks fast, the range is
+/- 25% and when the LED lights up continuously, the range is +/- 100%.
14. Sampler Volume Control:
Allows you to adjust the sampler volume level.
15. Loop Adjustment 16 Button:
Allows you to expand the length of the loop.
16. Pitch Fader:
Use this fader to adjust the pitch. Slide up to decrease the pitch, slide down to increase the pitch.
17. Bend –:
The track slows down while this button is pressed. Release the button to return to the original BPM.
18. Bend +:
The track speeds up while this button is pressed. Release the button to return to the original BPM.
19. Sensor LED:
Lights up when you touch the surface of the shuttle wheel.
20. BPM Button:
This button allows you to sync the current track with another by tapping the beat.
21. Shuttle Wheel:
In search mode the shuttle wheel can be used to search forward or backwards in the music track, as
well as fine tuning the cue point in pause mode. In pitch bend mode the shuttle wheel will function
the same as the pitch bend allowing you speed up (forward) or slow down (rewind). In Scratch mode
the shuttle wheel can be used for scratching effects.
23. PFL Button:
The PFL button is designed to route the channel input to the headphone section (depends on the
soundcard and settings) independent of the individual channel’s volume fader setting.
9
23. Effect On Button:
This button allows you to switch the effect processor on.
24. Effects Selector Button:
Pressing this button allows you to select one of the seven effects as shown below.
Fig. 6
25. Loop In:
Press this button to set the start point of the loop.
26. Parameter 1 Control:
The Parameter 1 and 2 controls allow you to adjust effect parameters. Not all effects require two
Parameter controls.
27. Loop Out:
Press this button to set the endpoint of the loop.
28. Parameter 2:
The Parameter 1 and 2 controls allow you to adjust effect parameters. Note that not all effects require
two parameter controls.
29. Sample Display:
Indicates the selected sample.
Mixer Functions
30. Folder Select
Depending on the browser panel (see page 19) you’re in, you can use the encoder to select a
certain track or folder. Confirm by pressing the encoder.
31. Load A Button:
Pressing this button loads the selected track in the A-deck.
32. Channel A Gain:
Channel input level is determined by the gain control. With the gain control you can boost
the signal of each individual channel. Adjust the input- sensitivity in order to match the incoming
signals to the mixer’s internal operation level.
33/ 34/ 35. Channel A Equalizer Section (HI / MID / LOW):
Use the 3 band equalizer to adjust the tone for each channel by using the Hi, Mid and Low controls.
36. Power LED:
Indicates that the unit is switched on.
37. Channel A Fader:
The fader controls the volume of a the A channel.
38. Crossfader:
The crossfader allows you to mix evenly from one source to another.
39. Folder Out Button:
Pressing this button opens a selected folder.
40. Load B Button:
Pressing this button loads the selected track in the B-deck.
41. Channel B Gain:
Channel input level is determined by the gain control. With the gain control you can boost
the signal of each individual channel. Adjust the input- sensitivity in order to match the incoming
signals to the mixer’s internal operation level.
42/ 43/ 44. Channel B Equalizer SECTION (HI / MID / LOW):
Use the 3 band equalizer to adjust the tone for each channel by using the Hi, Mid and Low controls.
45. VU METER:
The stereo VU Meter allows you to monitor the dB levels of the Left and Right Master output.
46. Channel B Fader:
The fader controls the volume of the B channel.
10
Front Functions
47. X-Fader Slope:
Allows you to adjust the response of the crossfader.
Back Functions
48. DC In 5V 1000mA
In case of powering more than one device from a laptop’s USB port, we suggest powering the
DS-MP-150 with an optional Power adaptor (DC5V, 1000mA)
49. Power Switch
If the DS-MP-150 is powered by the USB connector, switch the unit on by setting the power switch in
“USB” position. In case you want to power the DS-MP-150 by an optional adaptor, set the switch in the
“Adaptor” position.
50. USB Connector
Connect your DS-MP-150 to a PC or laptop. If the DS-MP-150 is the only USB device connected to your
PC or laptop, the DS-MP-150 can be powered by the PC or laptops USB connector.
Operations
1. Selecting Tracks Using the Folder Select encoder
• Turn the Folder Select Encoder to browse the tracks.
• Press the Folder Select Encoder to select the desired track.
2. Selecting Folders
• If you’re in the File/Search results panel (see page 19), press the Folder Out button to return to the File
system/ Folder structure panel (see page 19).
• Turn the Folder Select Encoder to browse the folders.
• Press the Folder Out button to open the desired folder.
• Press the Folder Select Encoder to return to the File system/Folder structure Panel.
3. Starting Playback
• Press the Play button during the pause or cue condition to start playback, the Play indicator
Lights up.
• The point at which playback starts is automatically stored in the memory as the cue point. The CD
player then returns to the cue point when the Cue button is pressed.
4. Stop Playback
There are two ways to stop playback:
1. Press the Pause button during playback to pause at that point.
2. Press the Cue button during playback to return to the cue point and enter pause condition.
5. Pausing
• Press the Pause button to pause playback.
• The Play indicator flashes when the pause mode is set.
• Playback resumes when the Play button is pressed again.
6. Setting a Cue Point
• Press the Pause button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Turn the Shuttle Wheel to go to the desired Cue point.
• Press the Cue button and your Cue point has been stored and will be indicated in the waveform
display as shown in figure 7.
• Press the Play button to continue playback.
11
7. Setting a hot Cue point in pause mode
• Press the Pause button to stop playback.
• The play indicator flashes when the pause mode is set.
• Turn the Shuttle Wheel to go to the desired Cue point.
• Press the press the desired Hot Cue button and your Cue point has been stored.
• The Hot Cue point will be indicated in the Waveform display as shown in figure 7.
• Press the Play button to continue playback.
8. Setting a hot Cue point in play mode
• During play mode, press the desired Hot Cue button.
• The Hot Cue point is stored while playback resumes.
• The Hot Cue point will be indicated in the Waveform display as shown in figure 7.
Fig. 7
(Hot) Cue Points
9. Deleting a (Hot) Cue Point
• Right Click on the (Hot) Cue point you want to delete and select the delete option.
10. Cueing
• "Cueing" is the action of preparing for playback.
• Press the Cue button, the player will enter Cue mode, the playback returns to the cue point and enter
pause mode, the Cue indicator lights up and the Pause indicator flashes. When the Play button is
pressed, playback starts from the cue point.
• If the Cue button is pressed after the search operation or the scanning operation, the playback returns
to the cue point and enters pause condition.
NOTE: During cue mode, if the Cue button is pressed and hold, playback will start from the cue point,
when the button is released, the player will return to the cue mode automatically, it allows you to
check the cue point.
11. Frame search
• Frame search is a function for monitoring the sound at a certain section of the disc and manually
changing the position. Searching is used to set a starting point with precision.
• Turn the Shuttle Wheel while in pause or cue mode to begin searching. The sound for one revolution of
the shuttle wheel is put out repeatedly.
• When the Shuttle Wheel is turned, the point from which the sound output moves is a number of
frames corresponding to the number of the milliseconds, and the time display in the waveform display
also changes.
• The search point moves in the forward direction when the Shuttle Wheel is turned clockwise. When the
Shuttle Wheel is turned counterclockwise, the search point will move backward.
12. Scanning (Fast forward/Fast backward)
• Scanning is a function for moving quickly forward or backward while rotating the Shuttle Wheel.
• Turn the Shuttle Wheel to begin scanning. The disc moves rapidly forward or backward and the sound is
audible.
• Turn the Shuttle Wheel clockwise to scan in the forward direction, counterclockwise to scan in the
reverse direction.
12
13. Changing Pitch of the song
There are three tools available for matching the BPM of the CD:
1. Use the Pitch slider to adjust the BPM.
2. Use the Pitch Bend buttons to change the BPM temporarily.
3. Turn the Shuttle wheel (in jog mode) to change the BPM temporarily.
1) Pitch-Slider
• To adjust the BPM by sliding the pitch slider up or down, press the Pitch button to turn on
the Pitch adjustment function.
• Slide the Pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is
+/-6%, +/-12%, +/-25% or +/-100%.
2) Pitch-Bending
• The BPM increases or decreases respectively while the Pitch Bend + or Pitch Bend - button is
pressed.
• The BPM increase depends on how long you hold the button. If you hold the button for about 5
seconds, the BPM will depending on the Pitch range go to +6, +12, +25 or +100% for Pitch Bend + or
-6, -12, -25 or -100% for Pitch Bend -. If you tap the button, the BPM will only change a little so you
can change the beat slightly without audible changing in the music.
• The CD will return to the BPM indicated by the Pitch slider when you release the Pitch Bend + or
Pitch Bend - buttons.
3) Turn the Shuttle wheel (in jog mode)
• Turn the Shuttle wheel clockwise during play to increase the BPM in the forward direction,
counterclockwise to decrease the BPM. The faster you turn the wheel, the more BPM changes.
• When you release the Shuttle Wheel, the CD will return to the BPM set by the Pitch Slider.
14. Loop PLAY
1. Press the Loop In button to set the loop start point the button will start flashing.
2. Press the Loop Out button to set the loop end point. After the end point is set, the playback will
enter the loop play from start point to end point repeatedly.
3. Press the Loop Out button again, the loop play function is canceled, the Loop indicator
dims.
4. Pressing the Loop Adjustment buttons lets you shorten or expand the length of the recorded loop.
13
Software Installation
Minimum system requirements:
PC





MAC





Intel Pentium 4 mobile 2 GHz processor or better.
Windows XP, Vista or windows 7.
1 GB RAM.
Hard Disk space for music.
Free USB port
G4 1.5GHz processor or better.
OSX 10.4.11 or higher
1GB RAM
Hard disk space for music
Free USB port
Installation procedure:
 Be sure to turn off the power supply to all equipment as well as the computer.
 Please connect the random USB cable to between DS-MP-150 and your computer. Set the power
switch on the DS-MP-150 in USB position.
 Insert the CD-ROM into the computers CD-drive and follow the instructions.
Running the setup program.
Follow the steps below.
1. If the installation program on your CD doesn’t start up automatically, you have start by double clicking
install_virtualdj_le_v6.0.7.rar on the CD.
The screen shown below will pop up.
Select the desired language and press next.
14
2. The welcome screen will pop up
Press the next button when finished reading the screen.
3. Now the read me file as shown below will pop up.
After reading, press the next button
15
4. The Start Installation screen will pop up.
Press the next button. During installation, you will see the screen as shown below.
16
If the installation is finished, the screen as shown below will pop up.
Press the finish button to complete your installation.
Running the Virtual DJ-software for the first time
1. Double click the Virtual DJ icon on the desk top. A pop up screen asking you to enter your serial
number will pop up.
2. Enter the serial number you received with your purchase (sticker on inside CD-cover flap) and press
the OK button.
3. Virtual DJ will check for a new version (this can be disabled in the configuration section).
4. The Virtual DJ user interface will appear.
17
5. Press the Config button (upper right). The following screen will pop up.
In the Sound Setup tab you can optimize the soundcard settings. The example shown is the most simple
setup using your computer’s built-in soundcard. When setup correctly, press the Apply button and then
press the OK button.
Interface zones
Before beginning to use Virtual DJ, familiarize yourself with the controls and zones of the Software. Upon
opening the application, an interface is displayed. Interfaces called skins feature different configurations,
layouts and functionality of the software. Let’s begin by selecting Internal Mixer interface to become
familiar with the most important features of the software. To change to a different skin while the software
is running, click on the Config menu and select the skins tab.
18
1. Browser/Sampler/ Effects/ Record
Browse your music folders, create, edit and save your playlists, adjust effects, video and audio, record
and save mixes.
2. Deck 1 Controls
Drag and drop music from the browser to this virtual deck. Track title, beats per minute display, counters
and transport control.
3. Deck 2 Controls
Same as Deck 1.
4. Center Panel
Multiple panels can provide access to crossfader, gain controllers, volume controllers, PFL buttons, video
controllers, video preview windows, effect controllers, timecode and scratch interface.
5. Rhythm window
This window tracks the waveform of each song loaded or playing on the decks. This area also features a
Computer Beat Grid (CBG) used for visual mixing and beat matching.
Browser panels
1. File System/Folder Structure
2. File/Search Results
For more information on the Virtual DJ software, we suggest checking the Support Section on
http://www.virtualdj.com/ . Here you can find manuals, forums etc.
19
Maintenance
The DAP Audio-CD-Player DS-MP-150 requires almost no maintenance. However, you should keep the
unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not
immerse in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio-CD-Player DS-MP-150
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, unplug the device.
2. Check power from the wall, all cables, connections, etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If nothing happens after 30 seconds, unplug the device.
5. Return the device to your DAP Audio dealer.
Product Specification
Dimensions: 360 x 260 x 50 mm (LxWxH)
Weight: 1,64 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: [email protected]
20
2010 Dap Audio.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement