DM-MD16X16-RPS - Media
DM-MD16X16-RPS
16x16 DigitalMedia™ Switcher w/Redundant Power Supply
Crestron® DM® Switchers provide the foundation for a complete
DigitalMedia system, delivering an advanced, true high-definition
multi-room AV signal routing solution that's extremely flexible and
installer-friendly. The DM-MD16X16-RPS affords low-latency switching
and pure, lossless distribution of HDMI® and other signals to support
the latest Blu-ray Disc® players, HDTV receivers, digital media
servers, computers, and all your other AV devices. Integrated Ethernet
networking and USB HID distribution provide a complete connectivity
solution. And naturally, Crestron control is built in for managing the
displays and other room devices without necessitating any additional
wiring. The DM-MD16X16-RPS also features built-in redundant power
supplies to ensure continuous reliable operation for mission critical
applications.
The DM-MD16X16-RPS is field-configurable to handle up to 16 AV sources
of virtually any type. The outputs are factory-configurable to
provide up to 16 DM room outputs and/or HDMI outputs in a single
chassis, with expansion capability possible for up to 80 outputs using
multiple chassis. A full selection of DM switcher input cards, DM
transmitters, and DM receivers provides extensive connectivity
throughout a residence or commercial facility, supporting a complete
range of analog and digital signal types — all through one
switcher!
DigitalMedia thoughtfully manages all of your disparate AV signals and
devices to ensure an optimum video image and audio signal at every
location. User-friendly setup and troubleshooting tools are provided
through the DM-MD16X16-RPS front panel, or via Crestron Toolbox™
software, to make setting up a complete multi-room HD system easy.
DigitalMedia 8G™
You can't talk about AV and home entertainment today without talking
about high-definition, and creating a professional HD AV distribution
system means handling the challenges that come with HDMI. HDMI is the
standard for interfacing high-definition AV equipment, but despite its
many benefits, wasn't developed with multi-room distribution in mind.
So, as the leader in HDMI and control system technologies, Crestron
developed DigitalMedia, the first complete HD AV distribution system
to take HDMI to a higher level, allowing virtually any mix of AV
sources to be distributed throughout a room, structure or across a
campus from a centralized rack location.
DigitalMedia 8G is the latest generation of DM, providing the world's
only truly professional, one-wire digital AV distribution and control
network. Engineered for ultra high-bandwidth and ultimate scalability,
DM 8G™ handles uncompressed video beyond high-definition with support
for HDCP, Deep Color, and 3D, plus high-bitrate 7.1 audio formats
including Dolby® TrueHD and DTS-HD Master Audio™, uncompressed
multichannel PCM audio, and high-speed Ethernet, all over one
8-conductor twisted-pair wire or simplex multimode fiber. DM 8G
enables wire distances up to 330 feet (100 m) via DM 8G+ (DM 8G over
CAT5e)[1,5], or 1000 ft via DM 8G Fiber (DM 8G over simplex
multimode fiber)[2,5], without any need for repeaters.
The DM-MD16X16-RPS provides full support for Crestron DigitalMedia 8G
devices as well as all first-generation DM CAT[3,5] and DM
Fiber[4,5] products, letting you take advantage of the latest
Crestron DM technology without compromising your existing investment.
Modular Architecture
The DM-MD16X16-RPS features a modular architecture with 16 input card
www.crestron.com
800.237.2041
slots. Input cards are field-installable, allowing for easy and
flexible system configuration with the ability to make changes to the
system as needs change. A wide selection of input cards is offered to
support a complete range of digital and analog AV signal types
including HDMI, DVI, DisplayPort Multimode[6], SDI, analog video and
RGB, SPDIF and analog audio, and DigitalMedia.
The outputs on the DM-MD16X16-RPS are factory-configurable to feed up
to 16 DM Receivers/Room Controllers using your choice of DM 8G+, DM 8G
Fiber, DM CAT, or DM Fiber. HDMI outputs are also available for
direct connection to centralized audio processors and video monitors.
Output Expansion
An HDMI "pass-thru" output is provided on every input card to allow
the inputs of up to 5 DM switchers to be daisy-chained, enabling the
configuration of very large distribution systems with many DM and HDMI
outputs. Using five DM-MD16X16-RPS switchers, it is possible to
support an incredible 80 separate outputs.
Computer Compatibility
Besides handling every available HDTV format supported by HDMI,
DigitalMedia also supports the distribution of DVI, DisplayPort
Multimode[6], and RGB computer sources, and is fully compatible with
DVI computer monitors up to 1920 x 1200 WUXGA.
EDID Format Management
With all of today's varied AV sources comes a multitude of confusing
video and audio formats to keep track of, and chances are not every
device in your system supports all of the same formats. Such conflicts
can wreak havoc any time you route one source to more than one
display or audio component. For instance, the Blu-ray player that's
feeding your 1080p projector in the theater may restrict itself to a
lower resolution, or even shut off completely, if someone decides to
view the same signal on the 20" TV in the kitchen. And, instead of
enjoying your theater's incredible 7.1 surround sound, you may find
yourself limited to 5.1 or even plain old stereo.
DigitalMedia eliminates such conflicts by managing the EDID (Extended
Display Identification Data) that many devices use to communicate
their capabilities. Via Crestron Toolbox software, the format and
resolution capabilities of each device can be assessed, allowing the
DM-MD16X16-RPS
installer to configure EDID signals appropriately for the most
desirable and predictable behavior.
A Scaler for Every Display
Scaling capability can be added to any DM system using select DM
receivers with built in high-definition scalers.[7] By placing an
independent high-performance scaler at every display device,
DigitalMedia truly delivers the most flexible and user-friendly
solution for routing multiple disparate sources to many different
display devices. This "Distributed Scaler Approach" ensures an optimal
image on every screen no matter what sources are selected.
Distributed scaling allows a high-res computer source to be viewed on
any display in the building, and allows a high-definition 3D source to
be viewed on lower-resolution 2D displays without compromising the
original signal, letting you share your theater's full HD 1080p 3D
image with smaller, lesser displays in the kitchen, bathroom, and
bedrooms.
QuickSwitch HD® Technology
Handling high-definition digital media means handling HDCP
(High-bandwidth Digital Content Protection), the encryption scheme
that content providers use to protect their DVDs, Blu-ray Discs, and
broadcast signals against unauthorized copying. Viewing HDCP encrypted
content requires a source device to "authenticate" each display and
signal processor in the system and issue it a "key" before the content
can be viewed. Ordinarily this causes a complete loss of signal for
up to 15 seconds each time a new source or display is selected
anywhere in the system. To make matters worse, every source device has
a limited number of keys available, so connect too many displays and
the source will simply stop outputting a signal without warning.
Not to worry — Crestron QuickSwitch HD manages the keys for
every HDCP-compliant device in the system, maintaining continuous
authentication for each device to ensure fast, reliable routing of any
source to any number of display devices.
Versatile Audio Routing
HDMI is the key to handling all the latest 7.1 surround sound formats
like Dolby TrueHD and DTS-HD Master Audio. Great for your high-end
home theater, but how do you share that same source with other audio
zones in the house?
DigitalMedia provides the answer, allowing for the simultaneous
distribution of multi-channel surround sound and two-channel stereo
signals from the same HDMI source. Using a choice of DSP-based input
cards, the DM-MD16X16-RPS employs onboard digital processing to derive
a stereo down-mix from the original multi-channel signal. Both
signals can be routed separately or simultaneously from any of the
switcher's DM outputs, allowing either signal to be selected for
output at each DM receiver location.
Back at the switcher, the digital stereo signal is also converted to
analog to enable sharing with every other room in the house via a
Sonnex™, Adagio®, or other multi-room audio distribution system. The
DM-MD16X16-RPS also allows bulky surround sound processors and
amplifiers to be located centrally instead of at the display location
via optional local HDMI outputs.
Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can
also extend 10/100 Ethernet out to each display and source device via
DM room controllers and select DM transmitters, providing high-speed
connectivity for any room device that requires a LAN connection.
Ethernet is also utilized internally by the Crestron control bus to
manage all of the DM devices in the system and provide display control
in each room. Through its Gigabit Ethernet port, the DM-MD16X16-RPS
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
television receivers and DVD changers, but also media servers and
computers. Built-in USB HID (Human Interface Device) signal routing
allows USB HID compatible keyboards and mice to be connected at a
remote display location, conference table or presentation lectern,
extending their signals through to the centralized equipment via USB
HID ports provided on select switcher input cards.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. DigitalMedia
provides an alternative to conventional IR and RS-232 device control
by harnessing the CEC (Consumer Electronics Control) signal embedded
in HDMI. Through its connection to the control system, the
DM-MD16X16-RPS provides a gateway for controlling many devices right
through their HDMI connections, potentially eliminating the need for
any dedicated control wires or IR probes. Through proper CEC signal
management, DigitalMedia allows you to take control of each device as
you like.
Easy Setup
Via the front panel or using Crestron Toolbox software, every step of
the DM-MD16X16-RPS's setup process is designed to be quick and easy,
configuring inputs and outputs automatically while letting the
installer make intelligent design decisions along the way. The
switcher even tests and measures the length of each DM cable,
automatically making the appropriate calibrations for optimal signal
transmission to every room. With DigitalMedia, an entire 16x16 system
can be commissioned in as little as 15 minutes.
Redundant Power Supplies
The DM-MD16X16-RPS model delivers enhanced reliability for mission
critical applications employing extreme long-life, redundant power
supplies to ensure continuous dependable operation throughout the life
of the system. Each of its internal switch-mode power supplies has a
demonstrated MTBF (Mean Time Between Failures) of over 1,000,000
hours, and in the unlikely event of an individual power supply fault,
the DM-MD16X16-RPS will continue to operate unhindered on only one
power supply. Clear indication of such a fault is provided on the
unit's front panel via a flashing red LED, with individual green LEDs
also provided to show the status of each individual power supply. The
power supplies can even be remotely monitored via Crestron RoomView®
software or any control system touch screen.
Please refer to the DigitalMedia Resources Webpage at http://www.
crestron.com/dmresources/ for additional design tools and reference
documents.
> Provides lossless HD AV signal routing over twisted-pair
wire or fiber
> Integrates video, audio, networking, and control over one
wire
> Affords full matrix switching with ultra high 12.5 Gbps
backplane data rate
> Handles HDMI® with Deep Color, 3D, and high-bitrate 7.1
encoded audio
> Supports video resolutions up to WUXGA 1920x1200 and
HD
1080p60
> Allows up to 330 ft (100 m) wire distance via DM
[1,5]
8G+™
> Allows up to 1000 ft (300 m) wire distance via DM 8G
Fiber[2,5] > Also supports all first-generation DM® CAT
DM-MD16X16-RPS
information
> Performs automatic AV signal format management via EDID
> Allows independent scaling for every display through select
DM receivers[7]
> Enables device control via CEC
> Distributes USB HID mouse and keyboard signals
> Allows full audio and USB breakaway switching
> Integrates with analog audio distribution systems
> Enables simultaneous output of stereo and surround sound
audio
> Includes integrated Ethernet switch with Gigabit LAN port
> Includes built-in power distribution for DM transmitters,
repeaters, and room controllers[8]
> Built-in redundant power supplies with remote status
monitoring
> Provides easy setup and diagnostics tools via front panel
or software
> 7-space 19-inch rack-mountable
SPECIFICATIONS
Video
Switcher: 16x16 digital matrix, modular input cards and factory-configurable
outputs, Crestron QuickSwitch HD®
Input Signal Types: Configurable via modular plug-in cards supporting
HDMI®, DisplayPort Multimode[6], DVI, SDI, RGB, component (YPbPr), SVideo (Y/C), composite video, DM CAT, DM Fiber, DM 8G+, and DM 8G Fiber
Output Signal Types: Configurable via factory-installed output cards
supporting DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, HDMI, and DVI[9] (All
input cards also include HDMI pass-thru outputs)
Formats: HDMI w/Deep Color & 3D, DVI, HDCP content protection support,
SD-SDI, HD-SDI, 3G-SDI, RGBHV up to UXGA/WUXGA, HDTV up to 1080p60,
NTSC or PAL
Input Resolutions, HDMI & DVI, Progressive: 640x480@60Hz,
720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz,
848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz,
1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50),
1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24),
1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz,
2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz
pixel clock
Input Resolutions, HDMI & DVI, Interlaced: 720x480@30Hz (480i),
720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz
(1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel
clock
Input Resolutions, RGB: 640x480@60Hz, 720x480@60Hz (480p),
720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz,
1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz,
1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz,
1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz
(1080p60), 1920x1200@60Hz, 2048x1152@60Hz
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
Input Signal Types: Configurable via modular plug-in cards supporting HDMI,
DisplayPort Multimode[6], SDI, analog (stereo 2-channel), SPDIF, DM CAT,
DM Fiber, DM 8G+, and DM 8G Fiber
Output Signal Types: Configurable via factory-installed output cards
supporting DM CAT, DM Fiber, DM 8G+, DM 8G Fiber, HDMI, and analog
(stereo 2-channel); (All input cards also include HDMI pass-thru outputs, and
most digital audio input cards also include analog stereo pass-thru audio
outputs)
Formats, HDMI only: Dolby Digital® Plus, Dolby® TrueHD, DTS-HD High
Res, DTS-HD Master Audio™, up to 8ch PCM
Formats, HDMI and SPDIF: Dolby Digital, Dolby Digital EX, DTS®, DTS-ES,
DTS 96/24, 2ch PCM
Formats, Analog: Stereo 2-Channel
Formats, SDI: (see DMC-SDI spec sheet)
Communications
DigitalMedia: DM Fiber, DM CAT, DMNet®, DM 8G+, DM 8G Fiber, HDCP
management, EDID format management, CEC
Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, autodiscovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, RSTP
USB: Supports USB HID class devices
Ethernet Switch
Provides (1) onboard 10/100/1000BaseT Gigabit Ethernet port, (1) internal
10BaseT/100BaseTX Ethernet port for the switcher, and (32) remote
10BaseT/100BaseTX Ethernet ports via select outboard devices
USB Switch
16x16 matrix
Card Slots
1 - 16: (16) DM switcher input card slots;
Each slot accepts (1) DMC-series input card;
Input cards are field-installable
DM OUTPUTS (SLOT 1 - 2): (2) DM switcher output card slots;
Each slot accepts (1) DMCO-series output card;
Output cards require factory installation
Connectors
LAN: (1) 8-wire RJ45 female;
10/100/1000BaseT Ethernet port
24ABG / EIG 1 - 8 (SLOT 1 - 2): (16) sets of (1) 4-pin and (1) 3-pin 3.5mm
detachable terminal blocks;
Comprises (16) DMNet ports with “EIG” power selection ports, each set
associated with a corresponding DM CAT output port on the output card in
either output slot;
Each DMNet port provides power and communications for a DM CAT device
connected via DM cable;
Each EIG port connects to an external power supply[8] to power the DM CAT
device connected to the corresponding DMNet port;
Maximum Load: 40 Watts (1.66 Amps @ 24 Volts DC) per port, limited to
available DMNet power from external power supply[8]
100-240V~450W 50/60Hz: (1) IEC C14 male chassis plug, main power
input;
Mates with removable power cord, included
G: (1) 6-32 screw, chassis ground lug
COMPUTER (front): (1) USB Type B female;
USB 1.1 computer console port (6 ft cable included)
LCD Display
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight;
Displays inputs/outputs by name, video & audio signal information, Ethernet
configuration and setup menus
Controls & Indicators
SOFTKEYS: (4) pushbuttons for activation of LCD driven functions
DM-MD16X16-RPS
VIEW: (1) pushbutton and red LED, selects VIEW mode for viewing current
routes
INFO: (1) pushbutton and red LED, selects INFO mode for viewing AV and
device info
MENU: (1) pushbutton, steps menu back one level
ENTER: (1) pushbutton, executes highlighted menu or value
AUDIO: (1) pushbutton & red LED, selects audio routing view
VIDEO: (1) pushbutton & red LED, selects video routing view
USB: (1) pushbutton & red LED, selects USB routing view
Quick-Adjust Knob: (1) continuous turn rotary encoder, adjusts menu
parameters
IN 1 - 16: (16) pushbuttons and red LEDs, select input for routing
OUT 1 - 16: (16) pushbuttons and red LEDs, select output for routing
POWER SUPPLIES, 1 - 2: (2) green LEDs, indicate when each corresponding
internal supply is functioning
POWER SUPPLIES, FAULT: (1) red flashing LED, indicates a fault with either
internal supply
LAN (rear): (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
Power Requirements
Main Power: 450 Watts @ 100-240 Volts AC, 50/60 Hz
Available DMNet Power: none
Redundant Power Supplies
Quantity/Type: (2) switch-mode, internal
Demonstrated MTBF: >1,000,000 hours per power supply @ full load and
25°C ambient conditions
Redundancy: Complete unit continues to operate at full capacity on one or
more functioning power supplies
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 1500 BTU/Hr
Enclosure
Chassis: Metal with black finish, vented sides, fan-cooled
Faceplate: Extruded aluminum, black finish with polycarbonate label overlay
Mounting: Freestanding or 7U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
Height: 12.22 in (311 mm) without feet
Width: 17.28 in (439 mm), 19.00 in (483 mm) with ears
Depth: 15.65 in (398 mm) without cards
Weight
28.4 lb (12.9 kg) without cards
Available Models
DM-MD16X16-RPS: 16x16 DigitalMedia™ Switcher w/Redundant Power
Supply
Available Accessories
DMC-HD: HDMI® Input Card
DMC-HD-DSP: HDMI® Input Card w/Down-mixing
DMC-DVI: DVI/RGB Input Card
DMC-VID-RCA-A: RCA Analog Video Input Card w/Analog Audio
DMC-VID-RCA-D: RCA Analog Video Input Card w/SPDIF Audio
DMC-VID-BNC: BNC Analog Video Input Card
DMC-VID4: Quad Video Input Card
DMC-SDI: SDI Input Card
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
DMC-CAT: DigitalMedia™ CAT Input Card
DMC-CAT-DSP: DigitalMedia™ CAT Input Card w/Down-mixing
DMC-F: DigitalMedia™ Fiber Input Card
DMC-F-DSP: DigitalMedia™ Fiber Input Card w/Down-mixing
DMC-C: DigitalMedia 8G+™ Input Card
DMC-C-DSP: DigitalMedia 8G+™ Input Card w/Down-mixing
DMC-S: DigitalMedia 8G™ Fiber Input Card
DMC-S-DSP: DigitalMedia 8G™ Fiber Input Card w/Down-mixing
DMCO-1000: 2 DM Fiber Output Card
DMCO-1100: 4 DM Fiber Output Card
DMCO-1110: 6 DM Fiber Output Card
DMCO-1111: 8 DM Fiber Output Card
DMCO-2000: 2 DM CAT w/1 HDMI Output Card
DMCO-2200: 4 DM CAT w/2 HDMI Output Card
DMCO-2220: 6 DM CAT w/3 HDMI Output Card
DMCO-2222: 8 DM CAT w/4 HDMI Output Card
DMCO-4000: 2 DM 8G Fiber w/1 HDMI Output Card
DMCO-4400: 4 DM 8G Fiber w/2 HDMI Output Card
DMCO-4440: 6 DM 8G Fiber w/3 HDMI Output Card
DMCO-4444: 8 DM 8G Fiber w/4 HDMI Output Card
DMCO-5000: 2 DM 8G+ w/1 HDMI Output Card
DMCO-5500: 4 DM 8G+ w/2 HDMI Output Card
DMCO-5550: 6 DM 8G+ w/3 HDMI Output Card
DMCO-5555: 8 DM 8G+ w/4 HDMI Output Card
DMCO-3000: 2 HDMI w/2 Stereo Analog Audio Output Card
DMCO-3300: 4 HDMI w/4 Stereo Analog Audio Output Card
DMCO-3330: 6 HDMI w/6 Stereo Analog Audio Output Card
DMCO-3333: 8 HDMI w/8 Stereo Analog Audio Output Card
DMCO-2100: 2 DM Fiber & 2 DM CAT w/1 HDMI Output Card
DMCO-1220: 2 DM Fiber & 4 DM CAT w/2 HDMI Output Card
DMCO-2221: 2 DM Fiber & 6 DM CAT w/3 HDMI Output Card
DMCO-1120: 4 DM Fiber & 2 DM CAT w/1 HDMI Output Card
DMCO-1122: 4 DM Fiber & 4 DM CAT w/2 HDMI Output Card
DMCO-1112: 6 DM Fiber & 2 DM CAT w/1 HDMI Output Card
DMCO-5100: 2 DM Fiber & 2 DM 8G+ w/1 HDMI Output Card
DMCO-1550: 2 DM Fiber & 4 DM 8G+ w/2 HDMI Output Card
DMCO-5551: 2 DM Fiber & 6 DM 8G+ w/3 HDMI Output Card
DMCO-1150: 4 DM Fiber & 2 DM 8G+ w/1 HDMI Output Card
DMCO-1155: 4 DM Fiber & 4 DM 8G+ w/2 HDMI Output Card
DMCO-1115: 6 DM Fiber & 2 DM 8G+ w/1 HDMI Output Card
DMCO-1300: 2 DM Fiber & 2 HDMI w/2 Stereo Analog Audio Output Card
DMCO-1330: 2 DM Fiber & 4 HDMI w/4 Stereo Analog Audio Output Card
DMCO-1333: 2 DM Fiber & 6 HDMI w/6 Stereo Analog Audio Output Card
DMCO-1130: 4 DM Fiber & 2 HDMI w/2 Stereo Analog Audio Output Card
DMCO-1133: 4 DM Fiber & 4 HDMI w/4 Stereo Analog Audio Output Card
DMCO-1113: 6 DM Fiber & 2 HDMI w/2 Stereo Analog Audio Output Card
DMCO-2300: 2 DM CAT w/1 HDMI & 2 HDMI w/2 Stereo Analog Audio Output
Card
DMCO-2330: 2 DM CAT w/1 HDMI & 4 HDMI w/4 Stereo Analog Audio Output
Card
DMCO-2333: 2 DM CAT w/1 HDMI & 6 HDMI w/6 Stereo Analog Audio Output
Card
DMCO-2230: 4 DM CAT w/2 HDMI & 2 HDMI w/2 Stereo Analog Audio Output
Card
DMCO-2233: 4 DM CAT w/2 HDMI & 4 HDMI w/4 Stereo Analog Audio Output
Card
DMCO-2223: 6 DM CAT w/3 HDMI & 2 HDMI w/2 Stereo Analog Audio Output
Card
DMCO-4300: 2 DM 8G Fiber w/1 HDMI & 2 HDMI w/2 Stereo Analog Audio
Output Card
DMCO-4330: 2 DM 8G Fiber w/1 HDMI & 4 HDMI w/4 Stereo Analog Audio
Output Card
DMCO-4333: 2 DM 8G Fiber w/1 HDMI & 6 HDMI w/6 Stereo Analog Audio
Output Card
DMCO-4430: 4 DM 8G Fiber w/2 HDMI & 2 HDMI w/2 Stereo Analog Audio
Output Card
DM-MD16X16-RPS
CRESFIBER8G-NP-SP1000: CresFiber® 8G Fiber Optic Cable, 50/125 x4
breakout, non-plenum, 1000 ft spool
CRESFIBER8G-P-SP500: CresFiber® 8G Fiber Optic Cable, 50/125 x4
breakout, plenum, 500 ft spool
CRESFIBER8G-P-SP1000: CresFiber® 8G Fiber Optic Cable, 50/125 x4
breakout, plenum, 1000 ft spool
CRESFIBER-CONN-SC50UM-12: CresFiber® Fiber Optic Cable Connector
(AFL Telecommunications™), SC 50µm, 12-Pack
CRESFIBER-DUAL-SC-P-1.5: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum, 1.5 ft
CRESFIBER-DUAL-SC-P-3: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum, 3 ft
CRESFIBER-DUAL-SC-P-6: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum, 6 ft
CRESFIBER-DUAL-SC-P-12: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum, 12 ft
CRESFIBER-DUAL-SC-P-20: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum, 20 ft
CRESFIBER-DUAL-SC-P-30: CresFiber® Duplex Fiber Optic Cable Assembly,
50/125, SC, Plenum, 30 ft
CRESFIBER-DUAL-SC-ARMORED-P-60: CresFiber® ARMORED Duplex Fiber
Optic Cable Assembly, 50/125, SC, Armored, Plenum, 60 ft
CRESFIBER-DUAL-SC-ARMORED-P-100: CresFiber® ARMORED Duplex Fiber
Optic Cable Assembly, 50/125, SC, Armored, Plenum, 100 ft
CRESFIBER-DUAL-SC-ARMORED-P-200: CresFiber® ARMORED Duplex Fiber
Optic Cable Assembly, 50/125, SC, Armored, Plenum, 200 ft
CRESFIBER-DUAL-SC-ARMORED-P-300: CresFiber® ARMORED Duplex Fiber
Optic Cable Assembly, 50/125, SC, Armored, Plenum, 300 ft
CRESFIBER-SINGLE-SC-P-1.5: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum, 1.5 ft
CRESFIBER-SINGLE-SC-P-3: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum, 3 ft
CRESFIBER-SINGLE-SC-P-6: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum, 6 ft
CRESFIBER-SINGLE-SC-P-12: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum, 12 ft
CRESFIBER-SINGLE-SC-P-20: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum, 20 ft
CRESFIBER-SINGLE-SC-P-30: CresFiber® Simplex Fiber Optic Cable
Assembly, 50/125, SC, Plenum, 30 ft
CRESFIBER-SINGLE-SC-ARMORED-P-60: CresFiber® ARMORED Simplex
Fiber Optic Cable Assembly, 50/125, SC, Armored, Plenum, 60 ft
CRESFIBER-SINGLE-SC-ARMORED-P-100: CresFiber® ARMORED Simplex
Fiber Optic Cable Assembly, 50/125, SC, Armored, Plenum, 100 ft
CRESFIBER-SINGLE-SC-ARMORED-P-200: CresFiber® ARMORED Simplex
Fiber Optic Cable Assembly, 50/125, SC, Armored, Plenum, 200 ft
CRESFIBER-SINGLE-SC-ARMORED-P-300: CresFiber® ARMORED Simplex
Fiber Optic Cable Assembly, 50/125, SC, Armored, Plenum, 300 ft
CRESFIBER-SINGLE-SC-CLEAR-NP-30: CresFiber® CLEAR Simplex Fiber
Optic Cable Assembly, 50/125, SC, Non-Plenum, 30 ft
CRESFIBER-SINGLE-SC-CLEAR-NP-60: CresFiber® CLEAR Simplex Fiber
Optic Cable Assembly, 50/125, SC, Non-Plenum, 60 ft
CRESFIBER-SINGLE-SC-CLEAR-NP-100: CresFiber® CLEAR Simplex Fiber
Optic Cable Assembly, 50/125, SC, Non-Plenum, 100 ft
Notes:
1. The maximum DigitalMedia 8G+ cable length is 330 ft (100 m) using
DM-CBL-8G DigitalMedia 8G cable, DM-CBL DigitalMedia Cable, DM-CBL-D
DigitalMedia D Cable, or generic CAT5e (or better) UTP or STP. Shielded
cable and connectors are recommended to safeguard against unpredictable
environmental electrical noise which may impact performance at resolutions
above 1080p.
2. The maximum DigitalMedia 8G Fiber cable length is 1000 ft (300 m) using
CRESFIBER8G fiber optic cable, or 500 ft (150 m) using standard CRESFIBER,
CRESFIBER-SINGLE-SC, or generic OM3 simplex multimode fiber optic cable.
3. The maximum DigitalMedia CAT cable length is 450 ft (137 m) using
DM-CBL DigitalMedia Cable. Actual cable length depends upon multiple
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
power, use a Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply
as required. Do not interconnect DMNet with Cresnet.
9. DVI output is supported via an HDMI output port using a suitable
adapter or interface cable. CBL-HD-DVI interface cable available
separately.
This product may be purchased from an authorized Crestron dealer. To find a
dealer, please contact the Crestron sales representative for your area. A
list of sales representatives is available online at www.crestron.
com/salesreps or by calling 800-237-2041.
Crestron, the Crestron logo, Adagio, CresFiber, Crestron Toolbox,
DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM 8G+, DMNet,
QuickSwitch HD, and Sonnex are trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and other countries.
Blu-ray Disc is either a trademark or registered trademark of the Blu-ray
Disc Association in the United States and/or other countries. Dolby, Dolby
Digital, and the double-D symbol are either trademarks or registered
trademarks of Dolby Laboratories in the United States and/or other
countries. DTS, DTS-HD Master Audio, and the DTS logos and Symbol are
either trademarks or registered trademark of DTS, Inc. in the United States
and/or other countries. HDMI and the HDMI Logo are either trademarks or
registered trademarks of HDMI Licensing LLC in the United States and/or
other countries. Other trademarks and trade names may be used in this
document to refer to either the entities claiming the marks and names or
their products. Crestron disclaims proprietary interest in the marks and
names of others. ©2011 Crestron Electronics, Inc.
DM-MD16X16-RPS
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2011 Crestron Electronics, Inc.
Specifications subject to change without notice. 11/6/2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising