Nematron M1900 Industrial Display 19.0” Panel Mount Touchscreen Display UL/cUL Class I Div 2 Approved LED Backlit Display DS M1900, Rev A Analog Resistive Touchscreen Aluminum Front Bezel NEMA 4/4X/12, IP66 55°C Operating Temp Industrial Grade Power Supply Made in USA Made in USA Overview Offering unparalleled value and superb quality, the Nematron brand M-Series are high performance LEDbacklit 12.1”, 15”, 17”, 19”, 21.5” and 22” widescreen color TFT flat panel monitors specifically designed for harsh industrial environments including Class I & II, Division 2 Hazardous Locations when mounted in a NEMA enclosure. M-Series monitors accept standard analog VGA inputs and can display VESA1 video modes with 16 million colors. An optional 5-wire analog touchscreen is available that offers RS-232 or USB interface capability. M-Series monitors are housed in heavy duty steel chassis with powder coated machined aluminum bezels. The monitors are certified to NEMA 4/4X/12 & IP65 standards, are UL/cUL listed, and meet CE requirements. All M-Series monitors are shipped with a power input wiring receptacle, VGA cable, touchscreen cables, mounting hardware, manual and driver software. Standard Configuration 19.0” SXGA Color TFT LED-backlit LCD Display 5-wire Analog Resistive Touchscreen with RS-232 or USB interface - Optional non-Touch clear polycarbonate window Ultra-Thin panel mounting depth, less than 2.9” behind bezel NEMA 4/4X/12 front bezel -Optional 304 stainless steel front bezel Integral 100-240 VAC power supply -Optional 24 VDC input power Optional Rack Mount Front Panel (M1900 only) Simplified mounting clip installation with no studs Accepts analog 15-pin video input or DVI input UL and cUL Ordinary Locations Listed UL and cUL Hazardous Locations Listed -Class I Division 2, Groups A, B, C, & D; Class II Division 2, Groups F & G; Class III when mounted in a NEMA enclosure FCC & CE Compliant 2-Year warranty 1 Technical Specifications M1900T Physical Overall Dimensions 15.70” x 18.66” x 2.95” (398.8mm x 474.0mm x 75.0mm) Panel Mounting Depth 2.7” (68.6mm) Cutout Dimensions 14.90” x 17.75” (378.5mm x 450.9mm) Weight 22.5 lbs (10.21kg) Shipping Weight 27.5 lbs (12.47kg) Option Weight (SS)* +4.0 lbs (1.81kg)* * Additional weight for Stainless Steel option. Display Display Diagonal 19.0” (482.6mm) Display Size H x V 14.82” x 11.85” (376.4mm x 301.0mm) Native Resolution SXGA, 1280 x 1024 Aspect Ratio 5:4 Brightness 300 nit Contrast Ratio 2000:1 Horz/Vert Viewing Angle 178°/178° Backlight Life / Typical 50,000 hrs Touchscreen 5-wire Analog Resistive; No Touchscreen option Peripherals Available I/O (1) Analog Video Port, (1) Digital Video (DVI) Port, Touchscreen inputs: (1) RS-232, (1) USB Power 2 Input Power 35W AC Input Voltage 100-240 VAC, 50-60 Hz, 1.0 A Maximum DC Input Voltage 18-36 VDC, 2.0 A Maximum Technical Specifications Environmental Temperature 3 Operating 0°C to 55°C Non-operating -20°C to 70°C Humidity 20% to 80% RH, noncondensing 20% to 80% RH, noncondensing Shock 15g peak acceleration, 11msec 30g peak acceleration, 11msec Vibration (5-2000 Hz) 4 .006” peak to peak displacement, 1.0g maximum acceleration .015” peak to peak displacement, 2.5g maximum acceleration Altitude 5 Sea level to 10,000 feet Sea level to 40,000 feet 3 4 Temperature specifications are for air temp surrounding the unit (i.e. inside any enclosure being utilized). Meets US Federal Requirements specified in 46 CFR 111.01-15 (d) for offshore electrical systems. Shock & Vibration specifications established with Solid State drives and no rotating media. 5 Altitude specification is established by using all internal component specifications. 4 Compliance NEMA Rating NEMA 4/4X/12, IP66 FCC 47 CFR, Part 15, Class A EU CE Marking CE, EN 55022: Class A, EN 61000-3-3, EN 61000-6-2, IEC 60950-1 Agency Approvals * UL508 Listed, ANSI/ISA 12.12.01-2012 6, cUL Listed CSA C22.2, #142, cUL Listed CSA 22.2, #213 * Class I Division 2, Groups A, B, C, D; Class II, Division 2, Groups F & G; Class III; Temp. Code: T5, when installed on a flat surface of a Type 1, 4, 4X, or 12 enclosure. Front Panel Front Panel Options Powder-Coated Aluminum Front Panel; with No Logo; Machined 304 Stainless Steel; Rackmount Powder Coated Aluminum (M1900 only) 7 7 Rackmount front panel is not NEMA 4/4X/12 and the unit is required to be installed on a rack in a Type 1 enclosure. Features 1. Optional 5-wire Analog Resistive Touchscreen 2. Integral 100-240 VAC or 24 VDC Power Supply 3. UL/cUL 508, Class I Div 2, CE Approvals 4. I/O Connectivity 5. USB Touchscreen Retention Cable 6. Panel Mounting via Clips 7. VESA Mounting M1900 - 100mm 8. Made with Pride in the USA 1 8 7 3 4 2 5 6 Standard 2-year warranty - Covers parts and service 3 Order Number Generation Base Unit Configuration: Mxx00(T or WT), where x = 12, 15, 17, 19, 21, or 22 (for display size) NEMA 4/4X/12 panel mount, LED-backlit TFT flat panel monitor with 5-wire analog resistive touch screen, built in AC power supply, and powder coated aluminum front panel. Units ship with AC wiring receptacle, 10’ VGA cable, 10’ RS-232 cable (touchscreen equipped units only), 3m USB cable (touchscreen equipped units only), mounting hardware, and operator’s guide (DVI cable sold separately). M1900 Display Size: 1900 19.0” SXGA LCD Input Options: M1900T T blank Power Supply: blank -24 -DC Touchscreen Non-Touch clear polycarbonate window 100-240 VAC 24 Volt DC Isolated 24 Volt DC Front Panel: blank -NL -SS -RM 1 Powder Coated Aluminum (with Nematron nameplate) Powder Coated Aluminum without Logo Machined 304 Stainless Steel Rackmount Powder Coated Aluminum (M1900 only) 1 Rackmount front panel is not NEMA 4/4x/12 and the unit is required to be installed on a rack in a Type 1 enclosure. Accessories CBL-3-VGA CBL-10-VGA CBL-25-VGA CBL-50-VGA 15-Pin analog VGA cable, 3’ length 15-Pin analog VGA cable, 10’ length 15-Pin analog VGA cable, 25’ length 15-Pin analog VGA cable, 50’ length CBL-3-RS232 CBL-10-RS232 CBL-25-RS232 CBL-50-RS232 Serial RS-232 touch screen cable, 3’ length Serial RS-232 touch screen cable, 10’ length Serial RS-232 touch screen cable, 25’ length Serial RS-232 touch screen cable, 50’ length CBL-3-USB CBL-10-USB CBL-15-USB USB touch screen cable, 3’ length USB touch screen cable, 10’ length USB touch screen cable, 15’ length CBL-3M-DVI DVI (type D) video cable, 3 m length CBL-3M-HDMI/DVI CBL-25-HDMI/DVI CBL-50-HDMI/DVI 3 meter HDMI to DVI-D video cable 25 feet HDMI to DVI-D video cable 50 feet HDMI to DVI-D video cable PWR-AC Plug for field wiring AC power PWR-DC Plug for field wiring DC power MISC-CLIP Mounting clip kit, includes 16 clips and screws CBL-PWR-AC 6’ AC wiring cable with standard 3-prong US end on one side and Phoenix Power Wiring connector with cover on other end. NOTE: NOT allowed for use in Hazardous Conditions. MTG-DIN-nPC300 DIN Rail Mounting Kit includes DIN Rail bracket that mounts a Nematron nPC300 Node PC to M-Series monitors using the 75mm or 100mm VESA mounting pattern on the rear of the units. MTG-DIN-nPC20 DIN Rail section for mounting a Nematron nPC20 Node PC to M-Series monitors using the 75mm or 100mm VESA mounting pattern on the rear of the units. 4
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021