GF1V User Manual
Energy Imports GF1V User Guide
www.energyimports.co.nz
1
Overview .........................................................................................................................................................................................4
Introduction................................................................................................................................................................................................... 4
Target Users ................................................................................................................................................................................................. 4
Prerequisites ................................................................................................................................................................................................ 4
Notation ........................................................................................................................................................................................................ 4
Product Introduction ..................................................................................................................................................................... 5
Product Overview ......................................................................................................................................................................................... 5
Package Contents ........................................................................................................................................................................................ 5
Product Features .......................................................................................................................................................................................... 6
Physical Dimensions and Indicators ............................................................................................................................................ 7
LED Indicators .............................................................................................................................................................................................. 7
Physical Dimensions..................................................................................................................................................................................... 8
GF1V Default Settings .................................................................................................................................................................................. 8
Interfaces .......................................................................................................................................................................................9
Rear ............................................................................................................................................................................................................. 9
Safety and Product Care ............................................................................................................................................................ 11
Transport and Handling .............................................................................................................................................................. 11
Installation and Configuration of the GF1V ............................................................................................................................... 12
Placement of your GF1V............................................................................................................................................................................. 12
Avoid obstacles and interference ................................................................................................................................................................ 12
Cordless Phones ........................................................................................................................................................................................ 12
Choose the “Quietest” Channel for your Wireless Network .......................................................................................................................... 12
Hardware installation .................................................................................................................................................................................. 13
Connecting via a cable................................................................................................................................................................................ 13
Connecting wirelessly ................................................................................................................................................................................. 13
Web Based Configuration Interface ........................................................................................................................................... 14
Device Info ................................................................................................................................................................................................. 14
Summary ............................................................................................................................................................................................ 14
WAN ................................................................................................................................................................................................... 15
Statistics ............................................................................................................................................................................................. 15
Route.................................................................................................................................................................................................. 16
ARP .................................................................................................................................................................................................... 16
DHCP ................................................................................................................................................................................................. 16
Advanced Setup ......................................................................................................................................................................................... 17
Layer2 Interface .................................................................................................................................................................................. 17
WAN Service ...................................................................................................................................................................................... 18
LAN .................................................................................................................................................................................................... 20
NAT............................................................................................................................................................................................................... 21
Security .............................................................................................................................................................................................. 25
Parental Control.................................................................................................................................................................................. 26
Quality of Service ....................................................................................................................................................................................... 27
Routing ....................................................................................................................................................................................................... 29
DNS.................................................................................................................................................................................................... 31
UPnP .................................................................................................................................................................................................. 32
DNS Proxy .......................................................................................................................................................................................... 32
DLNA.................................................................................................................................................................................................. 33
Packet Acceleration ............................................................................................................................................................................ 33
Storage Service .................................................................................................................................................................................. 33
Interface Grouping .............................................................................................................................................................................. 34
IP Tunnel ............................................................................................................................................................................................ 35
IPSec.................................................................................................................................................................................................. 36
Certificate ........................................................................................................................................................................................... 37
Power Management............................................................................................................................................................................ 37
Multicast (IGMP Configuration) ........................................................................................................................................................... 38
www.energyimports.co.nz
Energy Imports GF1V User Guide
2
Wireless ..................................................................................................................................................................................................... 39
Basic .................................................................................................................................................................................................. 39
Security .............................................................................................................................................................................................. 40
MAC Filter .......................................................................................................................................................................................... 40
Wireless Bridge .................................................................................................................................................................................. 41
Advanced ........................................................................................................................................................................................... 41
Station Info ......................................................................................................................................................................................... 42
Voice .......................................................................................................................................................................................................... 43
VoIP Status ........................................................................................................................................................................................ 43
SIP Basic Setting ................................................................................................................................................................................ 43
SIP Advanced ..................................................................................................................................................................................... 44
SIP Extra Setting ................................................................................................................................................................................ 46
SIP Debug Setting .............................................................................................................................................................................. 47
Diagnostics ................................................................................................................................................................................................. 48
Diagnostics ......................................................................................................................................................................................... 48
Management .............................................................................................................................................................................................. 49
Settings .............................................................................................................................................................................................. 49
Update Settings .................................................................................................................................................................................. 49
Restore Default................................................................................................................................................................................... 49
System Log ........................................................................................................................................................................................ 49
Access Control ........................................................................................................................................................................................... 50
Passwords .......................................................................................................................................................................................... 50
Services ............................................................................................................................................................................................. 51
Update Software ................................................................................................................................................................................. 51
Save/Reboot ....................................................................................................................................................................................... 51
Additional Product Information ................................................................................................................................................... 52
Establishing a wireless connection.............................................................................................................................................................. 52
Windows XP (Service Pack 3) ............................................................................................................................................................ 52
Windows Vista .................................................................................................................................................................................... 52
Windows 7 .......................................................................................................................................................................................... 52
Mac OSX 10.6 .................................................................................................................................................................................... 52
Troubleshooting .......................................................................................................................................................................................... 53
Using the indicator lights (LEDs) to Diagnose Problems ...................................................................................................................... 53
Quality of Service (QoS) configuration examples ........................................................................................................................................ 54
Limiting the upstream rate .................................................................................................................................................................. 54
Limiting the downstream rate .............................................................................................................................................................. 55
Technical Data ............................................................................................................................................................................ 56
Electrical Specifications .............................................................................................................................................................................. 56
Environmental Specifications / Tolerances .................................................................................................................................................. 56
Energy Imports GF1V User Guide
www.energyimports.co.nz
3
This manual provides information related to the installation, operation, and use of the GF1V.
The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts.
Before continuing with the installation of your GF1V, please confirm that you comply with the minimum system requirements
below.


An active UFB connection.
A Computer with Windows, Macintosh, or Linux-based operating systems with a working
Ethernet adapter with TCP/IP Protocol installed.

A Web Browser such as Internet Explorer, Google Chrome, Mozilla Firefox, Opera, Safari etc.

Wireless Computer System Requirements:
Computer with a working 802.11b, 802.11g or 802.11n wireless adapter.
The following symbols are used in this manual:
Indicates a note requiring attention.
Indicates a note providing a warning.
Indicates a note providing useful information.
www.energyimports.co.nz
Energy Imports GF1V User Guide
4

1 x 10/100/1000 Gigabit Ethernet WAN port for connection to fibre
services

4 x 10/100/1000 Gigabit Ethernet LAN ports for wired connections

Wireless N300 Access Point for multiple high speed WiFi
connections

2 x FXS ports for connecting a telephone to make VoIP calls

1 x USB host port – supports USB storage device for file sharing

Built-in media server. Just add a USB hard drive

IPv6 ready for the next generation IP addressing

WPS button for simple setup of your wireless network
The GF1V package consists of:

1 x Energy Imports GF1V WiFi Gigabit Fibre Router

1 x Quick start guide

2 x 1.5m RJ-45 Ethernet cable

1 x Power supply (12V/1A)

1 x RJ-11 Telephone cable
Energy Imports GF1V User Guide
www.energyimports.co.nz
5
Utalising the Gigabit WAN port, you can connect to the Internet via a fibre service.
This router also includes 1 x USB host ports that can be used to connect USB devices so that their capabilities can be shared will
all connected users. Connect a USB hard drive so that all files stored can be accessed and shared.
The included FXS ports can be used to connect standard telephones that will allow users to make calls over the Internet. By using
a VoIP service, phone bills can be dramatically reduced.
All of these features can be shared with multiple users via the built-in wireless access point or the four Gigabit LAN Ethernet
ports. The high speed Wireless N provides a signal strong enough to penetrate the far corners of a house and can connect all
Wi-Fi enabled devices, such as laptops, smart phones, gaming consoles, tablets and PCs. The four Gigabit LAN Ethernet ports
provide a wired connection that can be used to connect desktop computers, media devices or any Ethernet equipped product.
Note: Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n specifications. Actual wireless speed and
coverage are dependent on network and environmental conditions included but not limited to volume of network traffic, building materials and
construction/layout.
.
www.energyimports.co.nz
Energy Imports GF1V User Guide
6
The GF1V has been designed to be placed on a desktop. All of the cables exit from the rear for easy organization. The display is
visible on the front of the GF1V to provide you with information about network activity and the device status. See below for an
explanation of each of the indicator lights.
LED INDICATOR
Power
Internet
WAN
Ethernet 1-4
WiFi
WPS
USB 1
FXS1 – FXS2
COLOUR
DEFINITION
Green
The GF1V is powered on and operating normally.
Red
The GF1V is starting up.
Red Blinking
The firmware is being upgraded.
Off
The power is off.
Green
The GF1V is connected to an internet service.
Red
Authentication on the broadband account has failed.
Green Blinking
Data is being transmitted to or from the internet.
Off
The GF1V is not connected to the internet.
Green
A device is connected to the Ethernet WAN port.
Green Blinking
Data is being transmitted to or from the WAN.
Off
No device is connected to the Ethernet WAN port.
Green
A device is connected to the Ethernet LAN port.
Green Blinking
Data is being transmitted to or from the Ethernet LAN port.
Off
No device is connected to the Ethernet LAN port.
Green
WiFi is enabled.
Green Blinking
Data is being transmitted to or from the Wireless interface.
Off
WiFi is disabled.
Green
The client has successfully connected to the router.
Green Blinking
The client is accessing the router via WPS.
Off
WPS is disabled.
Green
A USB hard drive is connected.
Green Blinking
Data is being transmitted through the USB interface.
Off
No USB hard drive is connected to the USB interface.
Off
No handset is connected.
Green
VoIP registration was successful.
Green
Blinking
(Slow)
Green
Blinking
(Fast)
Energy Imports GF1V User Guide
The telephone is ready to make or receive a call.
The telephone is ringing.
www.energyimports.co.nz
7
The following page lists the physical dimensions of the GF1V.
170 mm (H) x 45 mm (D) x 190 mm (W)
GF1V DIMENSIONS
Width
190 mm
Height
170 mm
Depth
45 mm
Weight
343 grams
The following tables list the default settings for the GF1V.
LAN (MANAGEMENT)
Static IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
WIRELESS (WIFI)
SSID
Slingshot Home WIFI
Security
WPA2-PSK (AES)
Security Key
The full MAC address
GF1V WEB INTERFACE ACCESS
www.energyimports.co.nz
Username
admin
Password
Last 6 characters of MAC address
Energy Imports GF1V User Guide
8
The following interfaces are available on the GF1V:
INTERFACE
DESCRIPTION
TEL1 & TEL2
Connect regular analogue telephone handsets here to use them with a VoIP service.
LAN1 - 4
Gigabit Ethernet LAN ports. Connect your Ethernet based devices to one of these ports for highspeed internet access.
WAN
Gigabit WAN port for connection to a WAN network.
Reset button
Factory Reset the device by holding the Reset button down for 3 seconds.
Power
Connection point for the included power adapter. Connect the power supply here.
Energy Imports GF1V User Guide
www.energyimports.co.nz
9
NUMBER
INTERFACE
DESCRIPTION
1
WPS
Activate the WPS function by holding the WPS button down for 3 seconds.
2
WLAN
Enable or disable the Wi-Fi radio by holding the Wi-Fi button down for 3 seconds.
3
USB
Connect an external USB hard drive here to use the NAS feature of the GF1V.
4
Power
Turns the GF1V on or off.
www.energyimports.co.nz
Energy Imports GF1V User Guide
10
With reference to unpacking, installation, use and maintenance of your electronic device, the following basic guidelines are
recommended:

Do not use or install this product near water to avoid fire or shock hazard. For example, near a bathtub, kitchen sink, laundry
tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement).

Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its path
and no heavy items should be placed on the cord. In addition, do not walk on, step on or mistreat the cord.

To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are
unobstructed.
WARNING
Disconnect the power supply from the device before servicing.
When transporting the GF1V, it is recommended to return the product in the original packaging. This ensures the product will not
be damaged.
In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent
damage during courier transport.
Energy Imports GF1V User Guide
www.energyimports.co.nz
11
The wireless connection between your GF1V and your Wi-Fi devices will be stronger the closer your connected devices are to your
GF1V. Your wireless connection and performance will degrade as the distance between your GF1V and connected devices
increases. This may or may not be directly noticeable, and is greatly affected by the individual installation environment.
If you have concerns about your network’s performance that might be related to range or obstruction factors, try moving the
computer to a position between three to five meters from the GF1V in order to see if distance is the problem.
Note: While some of the items listed below can affect network performance, they will not prohibit your wireless
network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this
checklist may help.
If you experience difficulties connecting wirelessly between your Wi-Fi devices and your GF1V, please try the following steps:

In multi-storey homes, place the GF1V on a floor that is as close to the centre of the home as possible. This may mean
placing the GF1V on an upper floor.

Try not to place the GF1V near a cordless telephone that operates at the same radio frequency as the GF1V (2.4GHz).
Avoid placing your GF1V near devices that may emit radio “noise,” such as microwave ovens. Dense objects that can inhibit
wireless communication include:

Refrigerators

Washers and/or dryers

Metal cabinets

Large aquariums

Metallic-based, UV-tinted windows

If your wireless signal seems weak in some spots, make sure that objects such as those listed above are not blocking the
signal’s path (between your devices and the GF1V).
If the performance of your wireless network is impaired after considering the above issues, and you have a cordless phone:

Try moving cordless phones away from your GF1V and your wireless-enabled computers.

Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturer’s
information). If this fixes the problem, your phone may be interfering with the GF1V.

If your phone supports channel selection, change the channel on the phone to the farthest channel from your
wireless network. For example, change the phone to channel 1 and move your GF1V to channel 11. See your
phone’s user manual for detailed instructions.

If necessary, consider switching to a 900MHz or 5GHz cordless phone.
“
”
In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless
networks nearby that can conflict with your wireless network. Use the Site Survey capabilities found in the Wireless Utility of your
wireless adapter to locate any other wireless networks that are available (see your wireless adapter’s user manual), and switch
your Router and computers to a channel as far away from other networks as possible.
Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from
neighbouring cordless phones or other wireless devices.
www.energyimports.co.nz
Energy Imports GF1V User Guide
12
1.
Connect the power adapter to the Power socket on the back of the GF1V.
2.
Plug the power adapter into the wall socket and switch on the power.
3.
Wait approximately 60 seconds for the GF1V to power up.
1.
Connect the yellow Ethernet cable provided to one of the ports marked ‘LAN’ at the back of the GF1V.
2.
Connect the other end of the yellow Ethernet cable to your computer.
3.
Wait approximately 30 seconds for the connection to establish.
4.
Open your Web browser, and enter http://192.168.1.1 into the address bar and press enter.
5.
Follow the steps to set up your GF1V.
1.
Ensure Wi-Fi is enabled on your device (e.g. computer/laptop/smartphone).
2.
Scan for wireless networks in your area and connect to the network name that matches the Wireless network name
configured on the GF1V.When prompted for your wireless security settings, enter the Wireless security key configured
on the GF1V.
3.
Wait approximately 30 seconds for the connection to establish.
4.
Open your Web browser, and enter http://192.168.1.1 into the address bar and press Enter.
5.
Follow the steps to set up your GF1V.
Energy Imports GF1V User Guide
www.energyimports.co.nz
13
Please note that the GF1V is configured to work out of the box for Slingshot UFB connections. No configuration is necessary.
If you want to change any of the settings, please follow the steps below to configure your GF1V Wireless router via the web based
menu.
Open your web browser (e.g. Internet Explorer/Firefox/Safari) and type http://192.168.1.1/ into the address bar at the top of the
window.
At the login screen, type admin in the username and the last 6 characters of the <MAC> address in the password field, then click
the Login button.
When you log in to the router, the Device Info Summary page is displayed, providing a general overview of the status of the router
and the WAN connection.
ITEM
DEFINITION
Serial Number
The unique set of numbers assigned to the routers for identification purposes.
Build Timestamp
The date and time that the software running on the router was published.
Software Version
The current firmware version installed on the router.
Boot Loader (CFE) Version
The current boot loader installed on the router.
Wireless Driver Version
The current wireless driver installed on the router.
Voice Service Version
The version of the software running the voice module.
Uptime
The number of days, hours and minutes that the router has been running.
LAN IPv4 Address
The current IPv4 address assigned to the router.
Default Gateway
The current default gateway of the WAN interface.
Primary DNS Server
The current primary DNS server in use
Secondary DNS Server
The current secondary DNS server is use.
LAN IPv6 Address
The current IPv6 IP address in use if assigned.
Default IPv6 Gateway
The current IPv6 default gateway if assigned.
Date/Time
The current date and time set on the router.
www.energyimports.co.nz
Energy Imports GF1V User Guide
14
The WAN page shows more detailed information related to the WAN interface configuration, including the firewall status, IPv4 and
IPv6 addresses of the router.
ITEM
DEFINITION
Interface
The Interface of the WAN connection.
Description
The description of the WAN connection.
Type
The type of WAN connection.
VLAN Mux ID
Details the status of VLAN Mux ID.
IGMP
Details the status of IGMP on each WAN connection. IGMP is only used with IPv4
connections.
NAT
The NAT status of the WAN connection.
Firewall
The status of the router firewall across the WAN connection.
IPv4 Status
The status of the IPv4 WAN connection.
IPv6 Status
The status of the IPv6 WAN connection.
IPv4 Address
The current IP v4 address of the WAN connection.
IPv6 Address
The current IP v6 address of the WAN connection.
The Statistics – LAN page shows detailed information about the number of bytes, packets, errors and dropped packets on each
LAN interface in both directions of communication.
INTERFACE
Received/Transmitted
Energy Imports GF1V User Guide
DESCRIPTION
Bytes
Rx/Tx (receive/transmit) packets in bytes.
Packets
Rx/Tx (receive/transmit) packets.
Errors
Rx/Tx (receive/transmit) packets with errors.
Drops
Rx/Tx (receive/transmit) packets with drops.
www.energyimports.co.nz
15
The Statistics – WAN Service page shows detailed information about the number of bytes, packets, errors and dropped packets
on the WAN interface in both directions of communication.
INTERFACE
Received/Transmitted
DESCRIPTION
Bytes
Rx/Tx (receive/transmit) packets in bytes.
Packets
Rx/Tx (receive/transmit) packets.
Errors
Rx/Tx (receive/transmit) packets with errors.
Drops
Rx/Tx (receive/transmit) packets with drops.
The Route page displays any routes that the router has detected.
Click ARP to display the ARP information.
This option can be used to determine which IP address / MAC address is assigned to a particular host. This can be useful when
setting up URL filtering, Time of Day filtering or Static DHCP addressing.
Click DHCP to display the DHCP information.
You can use this to determine when a specific DHCP lease will expire, or to assist you with setting up Static DHCP addressing.
www.energyimports.co.nz
Energy Imports GF1V User Guide
16
The ETH interface page allows you to add or remove ETH WAN interfaces. This is currently configured for Slingshot UFB
requirements. Please do not change.
Energy Imports GF1V User Guide
www.energyimports.co.nz
17
The WAN Service page displays the current Wide Area Network service setup and allows you to configure the router to connect to
a larger network for Internet access. This is currently configured for Slingshot UFB requirements. Please do not change.
To add a WAN service, click the Add button. Use the drop down list to select the layer 2 interface to use for the WAN service and
click the Next button.
Select a WAN service type, enter a Service Description, enter the 802.1P Priority and 802.1 VLAN ID then click the Next button.
Enter the details as required by your Internet Service Provider and click the Next button.
www.energyimports.co.nz
Energy Imports GF1V User Guide
18
Enter the details as required by your Internet Service Provider and click the Next button.
Select the NAT Translation settings as desired and click the Next button.
When you select bridging mode, a summary of the settings is displayed. Click Apply/Save to commit the settings.
Energy Imports GF1V User Guide
www.energyimports.co.nz
19
Use the arrow buttons to move the interfaces required to the list on the left. Click Next.
Use the arrow buttons to move the interfaces required as DNS Server interfaces to the left. The interface highest on the list has
the highest priority as a DNS server. Click Next to continue.
A summary of your settings is displayed. Click Apply/Save to commit your settings to the router.
www.energyimports.co.nz
Energy Imports GF1V User Guide
20
The IPv6 LAN Auto Configuration page allows you to configure settings pertaining to the IPv6 DHCP server.
OPTION
Enable Unique Local
Addresses and
Prefix
Advertisement
Randomly Generate
DEFINITION
Enable the use of unique local addresses. The router will advertise the IPv6 prefix to new devices on the
network.
Randomly generates the unique local addresses and the prefix.
Statically Configure
Enter a static IPv6 address for the router if one has been assigned to you by your Internet Service Provider.
IPv6 LAN Applications
Enable IPv6 DHCP server
Enable DHCPv6 Server
and RADVD
The Router Advertisement Daemon (radvd) is an open-source software product that implements link-local
advertisements of IPv6 router addresses and IPv6 routing prefixes using the Neighbor Discovery Protocol (NDP)
as specified in RFC 2461. The Router Advertisement Daemon is used by system administrators in stateless
auto-configuration methods of network hosts on Internet Protocol version 6 networks.
When IPv6 hosts configure their network interfaces, they broadcast router solicitation (RS) requests onto the
network to discover available routers. The radvd software answers requests with router advertisement (RA)
messages. In addition, radvd periodically broadcasts RA packets to the attached link to update network hosts.
The router advertisement messages contain the routing prefix used on the link, the link maximum transmission
unit (MTU), and the address of the responsible default router.
Stateless
IPv6 hosts can configure themselves automatically when connected to a routed IPv6 network using Internet
Control Message Protocol version 6 (ICMPv6) router discovery messages. This type of configuration is suitable
for small organizations and individuals. It allows each host to determine its address from the contents of
received user advertisements. It makes use of the IEEE EUI-64 standard to define the network ID portion of the
address.
Stateful
This configuration requires some human intervention as it makes use of the Dynamic Host Configuration
Protocol for IPv6 (DHCPv6) for installation and administration of nodes over a network. The DHCPv6 server
maintains a list of nodes and the information about their state to know the availability of each IP address from
the range specified by the network administrator.
Enable MLD Snooping
Select whether to enable or disable MLD Snooping on the router. The Multicast Listener Discovery (MLD)
snooping function constrains the flooding of IPv6 multicast traffic on VLANs on the router.
Energy Imports GF1V User Guide
www.energyimports.co.nz
21
A virtual server allows you to direct incoming traffic from the WAN side to the Internal server with a private IP address on the LAN
side.
Click the Add button to add a virtual server.
FIELD
DESCRIPTION
Select a Service or custom
Server
Select a pre-configured port forwarding rule or choose custom server to create your own port
forwarding rule.
Server IP Address
Enter the IP address of the local server.
External Port Start
Enter the starting external port number (when custom server is selected). When a service is connected
this field will be completed automatically.
External Port End
Enter the ending external port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Protocol
Options include TCP, UDP or TCP/UDP.
Internal Port Start
Enter the starting internal port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Internal Port End
Enter the ending internal port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Click Save/Apply to save your settings when you have finished creating virtual servers.
www.energyimports.co.nz
Energy Imports GF1V User Guide
22
Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up
the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the
‘Triggering Ports’.
The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side
using the ‘Open Ports’. A maximum 32 entries can be configured.
To add a Trigger Port, press the Add button.
FIELD
DESCRIPTION
Select an Application or Custom
Application
A user can select a pre-configured application from the list or select the Custom Application option to
create custom application settings.
Trigger Port Start
Enter the starting trigger port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Trigger Port End
Enter the ending trigger port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Trigger Protocol
Options include TCP, UDP or TCP/UDP.
Open Port Start
Enter the starting open port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Open Port End
Enter the ending open port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Open Protocol
Options include TCP, UDP or TCP/UDP.
Energy Imports GF1V User Guide
www.energyimports.co.nz
23
The GF1V will forward IP packets from the Wide Area Network (WAN) that do not belong to any of the applications configured in the
Virtual Servers table to the DMZ host computer.
Enter the computer’s IP address and click Apply to activate the DMZ host. To deactivate the DMZ Host function clear the IP
address field and press the Save/Apply button.
www.energyimports.co.nz
Energy Imports GF1V User Guide
24
The GF1V has a firewall function which helps to keep you secure while allowing you to configure rules allowing certain types of
data through.
To use the firewall feature, begin by clicking the Add Firewall button to create a firewall.
Then click the Add Rule button to create a rule for the firewall. Enter the rules that you require for the firewall and then click the
Save&Apply button to commit the settings.
Energy Imports GF1V User Guide
www.energyimports.co.nz
25
The Parental Control feature allows you to take advanced measures to ensure the computers connected to the LAN are used only
when and how you decide.
This Parental Control function allows you to restrict access from a Local Area Network (LAN) connected device to an outside
network through the router on selected days and at certain times. Make sure to activate the Internet Time server synchronization
as described in the Management section, so that the scheduled times match your local time.
Figure 1: Advanced - Parental Control – Time Restriction
To add a time restriction rule, press the Add button. The following screen appears.
Figure 2: Advanced - Parental Control - Add Time Restriction
See the instructions below. Press the Apply/Save button to save a time restriction rule.
FIELD
DESCRIPTION
User Name
A user defined name for the time restriction rule.
Browser’s MAC Address
The MAC address of the network card of the computer running the browser.
Other MAC Address
The MAC address of a second LAN device or network card.
Days of the Week
The days of the week for which the rules apply.
Start Blocking Time
The time of day when the restriction starts.
End blocking time
The time of day when the restriction ends.
Table 2: Advanced - Parental Control - Add Time Restriction Settings
www.energyimports.co.nz
Energy Imports GF1V User Guide
26
With the URL filter, you are able to add certain websites or URLs to a safe or blocked list. This will provide you added security to
ensure any website you deem unsuitable will not be able to be seen by anyone who is accessing the Internet via the GF1V.
Select the ‘To block’ or ‘To allow’ option and then click Add to enter the URL you wish to add to the URL Filter list.
Figure 3: Advanced - Parental Control - URL Filter
Once you have chosen to add a URL to the list you will be prompted to enter the address. Simply type it in and select the
Apply/Save button.
Figure 4: Advanced - Parental Control - Add URL Filter
Quality of Service offers a defined level of performance in a data communications system - for example the ability to guarantee
that video traffic is given priority over other network traffic to ensure that video streaming is not disrupted by other network traffic.
This means that if you are streaming video and someone else in the house starts downloading a large file, the download won’t
disrupt the flow of video traffic.
Figure 5: Advanced - Enable QoS
To enable QoS select the Enable QoS checkbox, and set the Default DSCP (Differentiated Services Code Point) Mark. Then press
the Apply/Save button.
Energy Imports GF1V User Guide
www.energyimports.co.nz
27
QoS Queue
Figure 6: Advanced - QoS Queue Setup
Click the Add button to add a QoS Queue. The following screen is displayed.
Figure 7: Advanced - QoS - Add QoS Queue
The above screen allows you to configure a QoS queue entry and assign it to a specific network interface. Each of the queues can
be configured for a specific precedence. The queue entry configured here will be used by the classifier to place ingress packets
appropriately.
NOTE: Precedence level 1 relates to higher priority while precedence level 3 relates to lower priority.
QoS Classification
Figure 8: Advanced - QoS Classification Setup
Click the Add button to configure network traffic classes.
www.energyimports.co.nz
Energy Imports GF1V User Guide
28
Figure 9: Advanced - Add QoS Network Traffic Classification
The above screen creates a traffic class rule to classify the upstream traffic, assign queuing priority and optionally overwrite the IP
header TOS (type of service) byte. A rule consists of a class name and at least one condition. All of the specified conditions in this
classification rule must be satisfied for the rule to take effect.
Click the Apply/Save button to save and activate the rule.
The Default Gateway, Static Route and Policy Routing settings can be found in the Routing option of the Advanced menu.
Select your preferred WAN interface from the available options.
Figure 10: Advanced - Routing - Default Gateway
Energy Imports GF1V User Guide
www.energyimports.co.nz
29
The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings.
Figure 11: Advanced - Routing - Static Route
To add a static route rule, click the Add button. The following screen is displayed.
Figure 12: Advanced - Routing - Add Static Route
Enter the Destination Network Address, Gateway IP Address and/or WAN Interface. Then click Apply/Save to add the entry to the
routing table.
This function allows you to add policy rules to certain situations.
Figure 13: Advanced - Routing - Policy Routing
Click the Add button to add a policy rule. The following screen is displayed.
Figure 14: Advanced - Routing - Add Policy Route
Enter the details into the provided fields. The table below describes each field.
FIELD
DESCRIPTION
Policy Name
A user defined name for the policy route.
Physical LAN Port
The LAN port to be used for the policy.
Source IP
The IP address of the LAN device involved with the policy.
Use Interface
Select the Interface that the policy will employ.
Default Gateway
Enter the gateway address.
www.energyimports.co.nz
Energy Imports GF1V User Guide
30
This page allows you to enable automatic DNS settings detected from the Internet Service Provider or specify your own DNS
server address manually.
Figure 16: Advanced - DNS Server
The Dynamic DNS service allows a dynamic IP address to be aliased to a static hostname in any of a selection of domains,
allowing the router to be more easily accessed from various locations on the internet.
Figure 17: Advanced - DNS - Dynamic DNS
Note: The Add/Remove buttons will be displayed only if the router has been assigned an IP address from the remote
server.
To add a dynamic DNS service, click the Add button and the following screen will display.
Energy Imports GF1V User Guide
www.energyimports.co.nz
31
Figure 18: Advanced - DNS - Add Dynamic DNS Account
FIELD
DESCRIPTION
D-DNS Provider
Select the dynamic DNS provider from the list.
Host Name
The name of the dynamic DNS provider.
Interface
Select the interface from the list.
Username
Enter the Dynamic DNS account username.
Password
Enter the Dynamic DNS account password.
Table 3: Advanced - DNS - Add Dynamic DNS Account Settings
Universal Plug and Play (UPnP) is a set of networking protocols that can allow networked devices, such as computers, printers,
WiFi access points and mobile phones to automatically detect each other's presence on the network and establish functional
network services for data sharing, communications, and entertainment.
Figure 22: Advanced – UPnP
To enable DNS Proxy settings, select the corresponding checkbox and then enter the Host and Domain name, as in the example
shown below. Click Apply/Save to continue.
Figure 23: Advanced - DNS Proxy
The Host Name and Domain name are combined to form a unique label that is mapped to the router IP address. This can be used
to access the user interface of the router with a local name rather than by using the router IP address.
www.energyimports.co.nz
Energy Imports GF1V User Guide
32
The DLNA page allows you to enable or disable and configure the digital media server. This means you can have digital media
stored on an external USB hard drive connected to the GF1V and the router will make it accessible to other devices on your
network.
Figure 24: Advanced - DLNA
Select Enable on-board digital media server and then use the drop down list to select the Interface. In the Media Library Path
field, enter the path to the media. Click the Apply/Save button when you have finished.
Packet acceleration uses a number of methods to increase UFB WAN to LAN speeds. These can range from utilising
locally terminated TCP connections to Fast Connection Setup.
Figure 25: Advanced - Packet Acceleration
Select to enable or disable Packet Acceleration and click Apply/Save to save the new packet acceleration configuration settings.
The Storage Service options enable you to manage attached USB Storage devices and create accounts to access the data
stored on the attached USB device.
The storage device info page displays information about the attached USB Storage device.
Figure 26: Advanced – Storage Service
User accounts are used to restrict access to the attached USB Storage device.
To delete a User account entry, click the Remove checkbox next to the selected account entry and click Remove.
Click Add to create a user account.
Figure 27: Advanced – Storage Service – Storage User Account Configuration
Adding an account allows the creation of specific user accounts with a password to further control access permissions. To add an
account, click the Add button and then enter the desired username and password for the account.
Energy Imports GF1V User Guide
www.energyimports.co.nz
33
Figure 28: Advanced – Storage Service – Storage User Account Setup
Port Mapping allows you to create groups composed of the various interfaces available in your router. These groups then act as
separate networks.
To delete an Interface group entry, click the Remove checkbox next to the selected group entry and click Remove.
Figure 29: Advanced - Interface Grouping
Click Add to create an Interface group.
www.energyimports.co.nz
Energy Imports GF1V User Guide
34
Enter a group name and then use the arrow buttons to select which interfaces you wish to group. Click Apply/Save to save the
Interface grouping configuration settings.
The IP Tunnelling feature allows you to configure tunnelling of traffic between IPv6 and IPv4 networks.
Figure 30: Advanced - IP Tunnel - IPv6inIPv4
Click the Add button to add a new tunnel.
Figure 31: Advanced - IP Tunnel - IPv6inIPv4 - 6in4 Tunnel Configuration
Energy Imports GF1V User Guide
www.energyimports.co.nz
35
Figure 32: Advanced - IP Tunnel – IPv4inIPv6
Click the Add button to add a new tunnel.
Figure 33: Advanced - IP Tunnel – IPv4inIPv6 - 4in6 Tunnel Configuration
The GF1V offers IPSec VPN tunnel functionality. To delete an IPSec entry, click the Remove checkbox next to the selected IPSec
tunnel entry and click Remove.
Click Add to create a new IPSec tunnel connection.
Figure 34: Advanced - IPSec
Enter the following parameters:
PARAMETER
DEFINITION
IPSec Connection Name
Enter a name to identify the IPSec tunnel
Tunnel Mode
Select the applicable IPSec tunnel mode
Remote IPSec Gateway
Enter the IP Address of the IPSec server to connect to
Tunnel access from Local
Select which remote addresses local IPSec connections are able to access
IP Address from VPN
Enter the IP Address to be used locally for the IPSec tunnel
Subnet mask for VPN
Enter the subnet mask to be used locally for the IPSec tunnel
Tunnel Access from Remote
Select which local addresses remote IPSec connections are able to access
IP Address for VPN
Enter the IP Address to be used on the remote end for the IPSec tunnel
Subnet mask for VPN
Enter the subnet mask to be used on the remote end for the IPSec tunnel
Key Exchange Method
Select the type of IPSec exchange is to be used on the IPSec tunnel
Authentication Method
Select the applicable authentication for the IPSec tunnel
Pre-Shared Key
Enter the pre-shared key (if applicable) to grant access to the IPSec tunnel
Perfect Forward Secrecy
Select to use Perfect Forward Secrecy during key exchange for the IPSec tunnel
Advanced IKE Settings
Configure advanced IKE settings for the IPSec tunnel such as the encryption method or key life time
After entering the required IPSec tunnel service settings, click Apply/Save to save the new IPSec Tunnel configuration settings.
www.energyimports.co.nz
Energy Imports GF1V User Guide
36
Figure 35: Advanced – Certificate - Local
Figure 36: Advanced – Certificate – Trusted CA
The power management page enables you to control the green aspects of the GF1V.
You can enable or disable the power management features by selecting or unselecting the different power management functions
as necessary and then click Apply to save these settings.
Figure 37: Advanced – Power Management
Energy Imports GF1V User Guide
www.energyimports.co.nz
37
The Internet Group Management Protocol (IGMP) is a communications protocol used by hosts and adjacent routers on IP
networks to establish multicast group memberships. IGMP is a protocol only used on the network between a host and the router.
It allows a host to inform the router whenever that host needs to join or leave a particular multicast group. IGMP provides for more
efficient allocation of resources when used with online gaming and video streaming.
Figure 38: Advanced - IGMP Configuration
FIELD
DEFINITION
Default Version
The version IGMP in use by the router.
Query Interval
The hosts on the segment report their group membership in response to the router’s queries. The query interval
timer is also used to define the amount of time a router will store particular IGMP state if it does not hear any
reports on the group. The query interval is the time in seconds between queries sent from the router to IGMP
hosts.
Query Response Interval
When a host receives the query packet, it starts counting to a random value, less the maximum response time.
When this timer expires, the host replies with a report, provided that no other host has responded yet. This
accomplishes two purposes:
a) Allows controlling the amount of IGMP reports sent during a time window.
b) Engages the report suppression feature, which permits a host to suppress its own report and conserve
bandwidth.
Last Member Query Interval
IGMP uses this value when router hears IGMP Leave report. This means that at least one host wants to leave
the group. After router receives the Leave report, it checks that the interface is not configured for IGMP
Immediate Leave (single-host on the segment) and if not, it sends out an out-of-sequence query.
Robustness Value
The robustness variable is a way of indicating how susceptible the subnet is to lost packets. IGMP can recover
from robustness variable minus 1 lost IGMP packets. You can also click the scroll arrows to select a new
setting. The robustness variable should be set to a value of 2 or greater. The default robustness variable value
is 2.
Maximum Multicast Groups
The maximum number of multicast groups that the router can control at any one time.
Maximum Multicast
Data Sources
The maximum number of data sources a multicast group can have.
Maximum Multicast
Group Members
The maximum number of hosts a multicast group can have.
Fast Leave Enable
With IGMP fast-leave processing, which means that the router immediately removes the interface attached to a
receiver upon receiving a Leave Group message from a IGMP host.
www.energyimports.co.nz
Energy Imports GF1V User Guide
38
The Wireless Basic page allows you to enable the wireless network and configure its basic settings.
Figure 39: Wireless - Basic
The following parameters are available:
PARAMETER
DEFINITION
Enable Wireless
Select to enable or disable the wireless network function
Hide Access Point
Select to hide or display the wireless network when an SSID scan is performed
Clients Isolation
Select to prevent clients on the wireless network being able to access each other
Disable WMM Advertise
Select to prevent the GF1V advertising its WMM function
Enable Multicast Forwarding (WMF)
Select to enable Wireless Multicast Forwarding. This can reduce latency and improve throughput for wireless clients
Max Clients
Enter the maximum number of wireless clients able to connect to the wireless network
Wireless Guest Network
Select to enable a separate Wireless Guest network, the same options are available for a Guest network as with the
main system wireless network.
Click Apply/Save to save the new wireless configuration settings.
Energy Imports GF1V User Guide
www.energyimports.co.nz
39
The GF1V supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The GF1V also supports WPA,
WPA-PSK, WPA2, WPA2-PSK. You can also select to enable WPS mode.
Figure 40: Wireless - Security
The following parameters are available:
PARAMETER
DEFINITION
Enable WPS
Select to enable or disable the WPS function of the GF1V.
Select SSID
Select the SSID to apply the security settings to.
Network Authentication
Select the Wireless security type to use with the wireless network.
WPA/WAPI passphrase
Enter the security key to use with the wireless network.
WPA Group Rekey Interval
Enter the group rekey interval. This should not need to change.
WPA/WAPI Encryption
Select the type of encryption to use on the wireless network.
WEP Encryption
Select to utilise WEP encryption on the wireless network connection.
Click Apply/Save to save the new wireless security configuration settings.
MAC Filter allows you to add or remove the MAC Address of devices which will be allowed or denied access to the wireless
network. First use the Select SSID drop down list to select the wireless network you wish to configure, then select to either allow
or deny access to the MAC addresses listed.
Click Add to add a MAC Address Filter.
www.energyimports.co.nz
Energy Imports GF1V User Guide
40
Enter the MAC Address to be filtered and click Apply/Save to save the new MAC Address filter settings.
To delete a MAC filter entry, click the Remove checkbox next to the selected filter entry and click Remove.
Wireless Bridge allows you to configure the router’s access point as a bridge.
Select the mode for the Wireless Access Point built into the GF1V. You can specify which wireless networks will be allowed to
connect to the GF1V by using the ‘Bridge Restrict’ option and then entering the applicable MAC Addresses of the other wireless
access points.
Click Apply/Save to save the new wireless bridge configuration settings.
Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit
power and preamble settings.
Click Apply/Save to save any changes to the wireless network settings configuration.
Energy Imports GF1V User Guide
www.energyimports.co.nz
41
PARAMETER
DEFINITION
Band
You can select 2.4GHz or 5GHz.
Channel
Fill in the appropriate channel to correspond with your network settings. All devices in your wireless network must use the
same channel in order to work correctly. This router supports auto channeling functionality.
Auto Channel Timer(min)
Specifies the timer of auto channelling.
802.11n/EWC
Select disable 802.11n or Auto.
Bandwidth
Select the bandwidth for the network. You can select 20MHz in Both Bands, 20MHz in 2.4G Band and 40MHz in 5G Band,
or 40MHz in Both Bands.
Control Sideband
If you select 20MHz in Both Bands or 20MHz in 2.4G Band and 40MHz in 5G Band, the service of control sideband does not
work. When you select 40MHz in Both Bands as the bandwidth, the following page appears. Then you can select Lower or
Upper as the value of sideband. As the control sideband, when you select Lower, the channel is 1~7. When you select Upper,
the channel is 5~11.
802.11n Rate
Select the transmission rate for the network. The rate of data transmission should be set depending on the speed of your
wireless network. You can select from a range of transmission speeds, or you can select Auto to have the Router
automatically use the fastest possible data rate and enable the Auto-Fallback feature. Auto-Fallback will negotiate the best
possible connection speed between the Router and a wireless client. The default value is Auto.
802.11n Protection
The 802.11n standards provide a protection method so 802.11b/g and 802.11n devices can co-exist in the same network
without “speaking” at the same time.
Support 802.11n Client Only
Only stations that are configured in 802.11n mode can associate.
Multicast Rate
Select the multicast transmission rate for the network. The rate of data transmission should be set depending on the speed of
your wireless network. You can select from a range of transmission speeds, or you can select Auto to have the Router
automatically use the fastest possible data rate and enable the Auto-Fallback feature. Auto-Fallback will negotiate the best
possible connection speed between the Router and a wireless client. The default value is Auto.
Basic Rate
Select the basic transmission rate ability for the AP.
Fragmentation Threshold
Packets that are larger than this threshold are fragmented into multiple packets. Try to increase the fragmentation threshold if
you encounter high packet error rates. Do not set the threshold too low, since this can result in reduced networking
performance.
RTS Threshold
This value should remain at its default setting of 2347.Should you encounter inconsistent data flow, only minor reductions are
recommended. Should you encounter inconsistent data flow, only minor reduction of the default value, 2347, is
recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be
enabled. The Router sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a
data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right
to begin transmission. The RTS Threshold value should remain at its default value of 2347.
DTIM Interval
(Delivery Traffic Indication Message) Enter a value between 1 and 255 for the Delivery Traffic Indication Message (DTIM.) A
DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
Beacon Interval
A beacon is a packet of information that is sent from a connected device to all other devices where it announces its availability
and readiness. A beacon interval is a period of time (sent with the beacon) before sending the beacon again. The beacon
interval may be adjusted in milliseconds (ms). Default (100) is recommended.
XPress Technology
Select Enable or Disable. This is a special accelerating technology for IEEE802.11g. The default is Disabled.
Transmit Power
Adjust the transmission range here. This tool can be helpful for security purposes if you wish to limit the transmission range.
WMM (Wi-Fi Multimedia)
Select whether WMM is enable or disabled. Before you disable WMM, you should understand that all QoS queues or traffic
classes relate to wireless do not take effects.
WMM No
Acknowledgement
Select whether ACK in WMM packet. By default, the 'Ack Policy' for each access category is set to Disable, meaning that an
acknowledge packet is returned for every packet received. This provides a more reliable transmission but increases traffic
load, which decreases performance. To disable the acknowledgement can be useful for Voice, for example, where speed of
transmission is important and packet loss is tolerable to a certain degree.
WMM APSD
APSD is short for automatic power save delivery, Selecting enable will make it has very low power consumption. WMM Power
Save is an improvement to the 802.11e amendment adding advanced power management functionality to WMM.
This page shows the MAC address of authenticated wireless stations that are connected to the GF1V and their status
www.energyimports.co.nz
Energy Imports GF1V User Guide
42
This section explains how to configure the VoIP settings of the GF1V.
The Voice Status page displays the registration status of your SIP accounts and the total call time of each account.
The SIP Settings page is where you enter your VOIP service settings as supplied by your VOIP service provider (VSP). If you are
unsure about a specific setting or have not been supplied information for a particular field, please contact your VOIP service
provider to verify if this setting is needed or not.
Energy Imports GF1V User Guide
www.energyimports.co.nz
43
The individual fields shown above on the SIP Basic Settings page are explained in the following table.
OPTION
DEFINITION
Bound Interface Name
Select the Interface that the VoIP account will use to make a connection to the VoIP Service Provider.
SIP Local Port
Set the SIP local port of the gateway, the default value is 5060. SIP local port is the SIP UA (user agent) port.
SIP domain name
Enter the SIP domain name or IP address of your VoIP Service Provider here.
Use SIP Proxy
Select the checkbox of Use SIP Proxy, if your DSL router uses a SIP proxy. SIP proxy allows other parties to
call DSL router through it. When it is selected, the following fields appear.
SIP Proxy
The IP address of the proxy.
SIP Proxy port
The port that this proxy is listening on. By default, the port value is 5060.
Use SIP Outbound Proxy
Some network service providers require the use of an outbound proxy. This is an additional proxy, through
which all outgoing calls are directed. In some cases, the outbound proxy is placed alongside the firewall and it
is the only way to let SIP traffic pass from the internal network to the Internet. When it is selected, the following
fields appear.
SIP Outbound Proxy
The IP address of the outbound proxy.
SIP Outbound Proxy port
The port that the outbound proxy is listening on. By default, the port value is 5060.
Use SIP Registrar
Select this option if required by your VoIP Service Provider. Enter the SIP Proxy Domain Name and SIP Proxy
Port which is typically 5060.
SIP Registrar
The IP address of the SIP registrar.
SIP Registrar port
The port that SIP registrar is listening on. By default, the port value is 5060.
Account Enabled
If it is unselected, the corresponding account is disabled. You can not use it to initiate or accept any call.
Polarity Reverse Enable
Enable or disable this function.
Authentication name
Set the user name of authentication.
Password
Set the password of authentication.
Cid Name
User name. It is the Display Name.
Cid Number
Set the caller number. It must be a number of 0~9.
Priority
The priority of codec is declined from up to down. Codecs define the method of relaying voice data. Different
codecs have different characteristics, such as data compression and voice quality. For Example, G723 is a
codec that uses compression, therefore, it is good for use where the bandwidth is limited but its voice quality is
not good as other codecs, such as the G711. If you specify none of the codecs, using the default value
showed in the above figure, the DSL router chooses the codec automatically.
After entering your VoIP settings press the Apply button. Select Management > Save/Reboot and press the Reboot button. Once
the router restarts if there is a valid internet connection and the VoIP account settings are valid the VoIP service will start.
www.energyimports.co.nz
Energy Imports GF1V User Guide
44
The SIP Advanced page allows you to configure settings that your VoIP service provider has enabled on your SIP account and if
you have the appropriate call features and other functionality on your cordless or corded phone handsets.
Figure 41: VoIP - Advanced - Service Provider
OPTION
DEFINITION
Line
Displays the line number you want to configure
Call Waiting
Select this option for your phone if your VoIP Service Provider has enabled Call Waiting on your SIP account.
Unconditionally Call forwarding
number
Select this option if your VoIP Service Provider has enabled Call Forwarding on your SIP account and you wish
to use this feature.
Busy Call Forwarding Number
Enter the phone number to forward a call to if it arrives while the line is busy.
No Answer Call forwarding
number
Enter the phone number to forward a call to if the call is not answered.
Forward On “busy”
Select this option if your VoIP Service Provider has enabled Call Forwarding on your SIP account and you wish
to use this feature.
Forward On “No Answer”
Select this option if your VoIP Service Provider has enabled Call Forwarding on your SIP account and you wish
to use this feature.
MWI (Message Waiting
Indicator)
Select this option if your VoIP Service Provider has enabled MWI (Message Waiting Indicator) on your SIP
account and you wish to use this feature.
Anonymous Call Blocking
Select this option if your VoIP Service Provider has enabled Anonymous Call Blocking on your SIP account and
you wish to use this feature.
Anonymous Calling
Select this option if your VoIP Service Provider has enabled Anonymous Calling on your SIP account and you
wish to use this feature.
Energy Imports GF1V User Guide
www.energyimports.co.nz
45
Anonymous calling mode
When set to Display anonymous, the modem hides your caller ID. When set to All anonymous, the modem
hides both caller ID and the SIP URL of the originating call.
DND (Do Not Disturb)
Select this option if your VoIP Service Provider has enabled DND (Do Not Disturb) on your SIP account and you
wish to use this feature.
Enable T38
Redundancy Support
Select this function if you wish to send or receive faxes via VoIP and have a fax machine capable of using the
T38 fax over VoIP protocol.
Enable VBD redundancy
support
Select this checkbox to use the feature.
Enable VAD support
Enables the Voice Activated Detection function of the modem.
Enable RTCP Flow Control
Select this checkbox to use the feature.
Enable Echo Cancellation
Select this checkbox to use the feature.
Enable # To ASCII
Select this checkbox to use the feature.
Enable Reinjection Function
Select this checkbox to use the feature.
RFC2198 Payload Value
(range 97-127)
Enter the RFC2198 payload value that the valid range is 96 ~ 127.
Registration Expire Timeout
Enter the registration expire timeout.
Session Expire Time
The interval of dialog refreshing time.
Min Session Expire Time
The minimum interval of dialog refreshing time.
VoIP DialPlan Setting
Set the VoIP dial plan. If user-dialed number matches it, the number is processed by the DSL router
immediately.
DSCP for SIP
Set the DSCP for SIP. You can select it from the drop-down list.
DSCP for RTP
Set the DSCP for RTP. You can select it from the drop-down list.
Dtmf Relay Setting
Set DTMF transmit method, which can be following values:
–
SIP Info: Use SIP INFO message to transmit DTMF digits.
–
RFC2833: Use RTP packet to encapsulate DTMF events, as specified in RFC 2833.
–
InBand: DTMF events are mixed with user voice in RTP packet.
SIP Transport Protocol
Select the transport protocol to use for SIP signaling. Note that the SIP proxy and registrar need to support the
protocol you select.
Enable Local Supplementary
Service
Select the checkbox to enable the supplementary service settings by the telephone set. If you deselect the
checkbox, the supplementary service can not be set by the telephone set.
Table 4: VoIP - Advanced - Service Provider
This page displays additional settings related to the SIP service.
PARAMETER
www.energyimports.co.nz
DEFINITION
Dial tone time
Dial tone duration.
Busy tone time
Busy tone duration.
Inter digit time
The valid range is 1 ~ 5.
Offhook warning tone time
Offhook warning tone duration.
Ringback tone time
Ringback tone duration.
Energy Imports GF1V User Guide
46
This page allows you to configure various settings regarding the logging levels of the SIP service.
OPTION
DEFINITION
SIP Log Server IP Address
Enter the IP address where the SIP Log data for the router’s currently saved VoIP account settings will be sent
to.
SIP Log Server port
Enter the port to be used for transmitting the SIP Log data for the router’s currently saved VoIP account
settings.
Ingress Gain
The incoming signal amplitude can be controlled with this field. Combined with the Egress gain a ratio can be
expressed of input to output. The Ingress Gain setting can help improve the quality of the VoIP line, and can
influence call volumes and help eliminate echoes.
Egress Gain
The outgoing signal amplitude can be controlled with this field. Combined with the Ingress gain a ratio can be
expressed of input to output. The Egress Gain setting can help improve the quality of the VoIP line, and can
influence call volumes and help eliminate echoes.
Energy Imports GF1V User Guide
www.energyimports.co.nz
47
This page is used to test the connection to your local network, and the connection to your Internet service provider. You may
diagnose the connection by clicking the Test button or click the Test With OAM F4 button. If the test continues to fail, click Help and
follow the troubleshooting procedures.
The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test
displays a fail status:
1.
Click on the Help link and follow the troubleshooting procedures in the Help screen that appears.
2.
Now click Rerun Diagnostic Tests at the bottom of the screen to re-test and confirm the error.
3.
If the test continues to fail, contact Technical Support.
FIELD
DESCRIPTION
eth Connection
Pass: Indicates the Ethernet connection to your computer is connected to the LAN port of the router.
Fail: Indicates that the router does not detect the Ethernet interface of your computer.
Test your Wireless Connection
Pass: Indicates that the wireless card is switched ON.
Fail: Indicates that the wireless card is switched OFF.
www.energyimports.co.nz
Energy Imports GF1V User Guide
48
The Settings screens allow you to back up, retrieve and restore the default settings of your Router. It also provides a function for
you to update your router’s firmware.
The following screen appears when Backup is selected. Click the Backup Settings button to save the current configuration
settings.
You will be prompted for the location to save the backup file to on your PC.
Figure 42: Management - Device Settings – Backup
The following screen appears when selecting Update from the Settings submenu. By clicking on the Browse button, you can
locate a previously saved filename as the configuration backup file. Click on the Update settings button to upload the selected file.
The following screen appears when selecting Restore Default from the Settings submenu. By clicking on the Restore Default
Settings button, you can restore your Routers default firmware settings. To restore system settings, reboot your Router.
The System log page allows you to view the log of the router and configure the logging level also. To view the system log, click
the View System Log button.
To configure the system log, click the Configure System Log button.
Energy Imports GF1V User Guide
www.energyimports.co.nz
49
The Access Control option found in the Management drop down menu configures access related parameters in the following
three areas:

Passwords

Services Control
Access Control is used to control local and remote management settings for your router.
The Passwords option configures your account access password for your modem. Access to the device is limited to the following
three user accounts:

admin is to be used for local unrestricted access control

support is to be used for remote maintenance of the device

user is to be used to view information and update device firmware
Use the fields illustrated in the screen below to change or create your password. Passwords must be 16 characters or less with
no spaces. Click the Apply/Save button after making any changes to continue.
www.energyimports.co.nz
Energy Imports GF1V User Guide
50
The Service Control List (SCL) allows you to enable or disable your Local Area Network (LAN) or Wide Area Network (WAN)
services by ticking the checkbox as illustrated below. The following access services are available: FTP, HTTP, ICMP, SAMBA,
SNMP, SSH, TELNET, and TFTP. Click the Apply/Save button after making any changes to continue.
The following screen appears when selecting the Update Software option from the Management menu. By following this screen’s
steps, you can update your modem’s firmware. Manual device upgrades from a locally stored file can also be performed using the
following screen.
1. Obtain an updated software image file.
2.
Enter the path and filename of the firmware image file in the Software File Name field or click the Browse button to locate
the image file.
3.
Click the Update Software button once to upload and install the file.
This option reboots the GF1V.
Figure 43: Management - Reboot
NOTE 1: It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable
the Dynamic Host Configuration Protocol (DHCP) server you will need to apply Static IP settings.
NOTE 2: If you lose all access to your web user interface, simply press the reset button on the rear panel for 3 seconds to restore
default settings.
Energy Imports GF1V User Guide
www.energyimports.co.nz
51
1.
2.
3.
4.
5.
Open the Network Connections control panel (Start -> Control Panel -> Network Connections):
Right-click on your Wireless Network Connection and select View Available Wireless Networks:
Select the wireless network and click Connect.
Enter the network key.
The connection will show Connected.
1.
2.
3.
4.
5.
6.
7.
Open the Network and Sharing Center (Start > Control Panel > Network and Sharing center).
Click on "Connect to a network".
Choose "Connect to the Internet" and click on "Next".
Select the wireless network and click Connect.
Enter the network key.
Select the appropriate location. This will affect the firewall settings on the computer.
Click on both "Save this network" and "Start this connection automatically" and click "Next".
1.
2.
3.
4.
5.
6.
7.
8.
9.
Open the Network and Sharing Center (Start > Control Panel > Network and Sharing center).
Click on "Change Adapter settings" on the left-hand side.
Right-click on "Wireless Network Connection" and select "Connect / Disconnect".
Select the wireless network and click Connect.
Enter the network key.
You may then see a window that asks you to "Select a location for the 'wireless' network". Please select the "Home" location.
You may then see a window prompting you to setup a "HomeGroup". Click "Cancel" on this.
You can verify your wireless connection by clicking the "Wireless Signal" indicator in your system tray.
After clicking on this, you should see an entry matching the SSID of your GF1V with "Connected" next to it.
1.
2.
3.
4.
Click on the Airport icon on the top right menu.
Select the wireless network and click Connect.
On the new window, select “Show Password”, type in the network in the Password field and then click on OK.
To check the connection, click on the Airport icon and there should be a tick on the wireless network name.
Note: For other operating systems, or if you use a wireless adaptor utility to configure your wireless connection, please
consult the wireless adapter documentation for instructions on establishing a wireless connection.
www.energyimports.co.nz
Energy Imports GF1V User Guide
52
The LEDs are useful aides for finding possible problem causes.
The Power LED does not light up.
STEP
CORRECTIVE ACTION
1
Make sure that the GF1V power adaptor is connected to the device and plugged in to an appropriate power
source. Use only the supplied power adaptor.
2
Check that the GF1V and the power source are both turned on and device is receiving sufficient power.
3
Turn the GF1V off and on.
4
If the error persists, you may have a hardware problem.
I cannot access the web configuration pages.
STEP
CORRECTIVE ACTION
1
Make sure you are using the correct IP address of the GF1V. You can check the IP address of the device
from the Network Setup configuration page.
2
Check that you have enabled remote administration access. If you have configured an inbound packet filter,
ensure your computer’s IP address matches it.
3
Your computer’s and the GF1V’s IP addresses must be on the same subnet for LAN access. You can check
the subnet in use by the router on the Network Setup page.
4
If you have changed the devices IP address, then enter the new one as the URL you enter into the address
bar of your web browser.
5
If you are still not able to access the web configuration pages, reset the router to the factory default settings
by pressing the reset button for 3 seconds and then releasing it. When the Power LED begins to blink, the
defaults have been restored and the GF1V restarts. Navigate to 192.168.1.1 in your web browser and enter
“admin” (without the quotes) as the username and the last 6 characters of the <MAC> address as the password.
The web configuration does not display properly.
STEP
CORRECTIVE ACTION
1
Delete the temporary web files and log in again. In Internet Explorer, click Tools, Internet Options and
then click the Delete Files ... button. When a Delete Files window displays, select Delete all offline
content and click OK. (Steps may vary depending on the version of your Internet browser.)
I forgot my login username and/or password.
STEP
1
2
CORRECTIVE ACTION
Press the Reset button for 3 seconds, and then release it. When the Power LED begins to blink, the defaults
have been restored and the GF1V restarts.
You can now login with the factory default username and password “admin” (without the quotes) as the
username and the last 6 characters of the <MAC> address as the password.
It is highly recommended to change the default username and password. Make sure you store the username
and password in a safe place.
I cannot access the GF1V from the WLAN or ping any computer on the WLAN.
STEP
CORRECTIVE ACTION
1
Check the Wi-Fi LED on the front of the unit and verify the WLAN is enabled as per the LED Indicator section.
2
If you are using a static IP address for the WLAN connection, make sure that the IP address and the subnet
mask of the GF1V and your computer(s) are on the same subnet. You can check the routers configuration
from the Network Setup page.
Energy Imports GF1V User Guide
www.energyimports.co.nz
53
1.
By default, a QoS queue is created when a WAN interface is created. On the QoS Queue page, enable the queue
for eth4(WAN) interface and type in a name for the queue.
2.
On the QoS Classification page, add a rule to limit the upstream rate, for example:
Classification Criteria:
Class Interface: LAN
Ether type: IP
Classification Results:
Class Queue: the queue that was enabled in Step 1
Set rate-limit: set according to your preference
3.
Click Apply/Save.
www.energyimports.co.nz
Energy Imports GF1V User Guide
54
1.
Navigate to the QoS Queue page to add a queue for the LAN interface, for example:
2.
On the QoS Classification page, add a rule to limit the downstream rate, for example:
Classification Criteria:
Class Interface: the appropriate WAN interface
Classification Results:
Class Queue: the queue that was created on Step 1
Set rate-limit: set according to your preference
3.
Click Apply/ Save
The QoS Classification table looks like this:
Energy Imports GF1V User Guide
www.energyimports.co.nz
55
The following table lists the hardware specifications of the GF1V.
MODEL
GF1V
Ethernet WAN
Connectivity
1 x Gigabit WAN port (10/100/1000 Mbps)
4 x 10/100/1000 Mbps, 1 x WLAN
LED Indicators
Power, WAN, INTERNET,LAN 1-4, WLAN, WPS, FXS1, FXS2, USB.
Operating Temperature
Operating temperature: 0˚C - 40˚C, Humidity: 10%-90% non-condensing
Storage temperature: -10˚C - 70˚C, Humidity: 0%-95% non-condensing
Power Input
12V DC - 1A
Dimensions & Weight
170 mm (H) x 45 mm (D) x 190 mm
343 grams
It is recommended that the GF1V be powered by the supplied 12V DC, 1A power supply. A replacement power supply is available
from the Energy Imports Online shop.
The GF1V housing enables it to operate over a wide variety of temperatures from 0˚C - 40˚C (operating temperature).
www.energyimports.co.nz
Energy Imports GF1V User Guide
56
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising