Recommended Vehicle Mounting Solution

Recommended Vehicle Mounting Solution
Recommended Vehicle Mounting Solution
Chevrolet Silverado, Suburban , Tahoe, GMC Yukon, Sierra
Vehicle Models/Years:
• Chevrolet Avalanche (2007-2013)
• Chevrolet Silverado (2007-2013 New
Body Style)
• Chevrolet Suburban (2007-2014 New
Body Style)
• Chevrolet Tahoe (2007-2014 New Body
• GMC Sierra (2007-2013 New Body Style)
• GMC Yukon/Yukon XL (2007-2014 New
Body Style)
• Chevrolet Silverado/GMC Sierra
2500/3500/HD Models (2014)
Follow us on:
Chevrolet Silverado, Suburban , Tahoe, GMC Yukon, Sierra - Console System
Solution Components:
Rugged Docking Stations and Vehicle Mounts
1. Leg Kit
(Item No. 7160-0160)
Leg Kit is a no-drill solution and attaches to the
passenger side seat studs.
2. 29” Top Plate
(Item No. 7160-0085)
Top plate allows console box to be offset towards the
passenger for added space.
3. 13” Console Box
(Item No. MCS-EPIC13)
The two-piece flexible design allows for multiple
height/angle combinations based on radio
requirements. Rounded edges designed for passenger
safety and gives a sleek appearance. Console box
comes with 3 blank filler panels and 3 faceplates.
4. Side Extension Mounting Plate
(Item No. 7160-0106)
Provides off-set mounting surface
5. Pole System
(Item No. DS-LOWER-7 & 7160-0178)
Pole system includes the lower tube and the center
upper pole. Combined they allow the user to
ergonomically position the computer to fit them best.
6. 9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around 360° with locking
points every 15°. Slide Arm can extend out from 9”
to 13” from center pole and locks automatically in
the retracted 9” position. Motion Attachment has tilt
capabilities up to 90° forward/26° backward and can be
swiveled up to 360°. Motion Attachment works with
VESA 75mm, Gamber-Johnson 2x4, NEC or AMPS hole
7. Support Brace
(Item No. 7160-0230)
Support Brace provides additional mount system
support in rugged driving conditions and reduces
mounting system vibration.
8. Armrest
Gamber-Johnson is the leading manufacturer of quality, rugged docking
stations and vehicle mounts. The solution shown is the recommended
solution, however the components can be mixed and matched so you can
design the solution that fits your specific requirements. Visit Gamber-Johnson’s
website at to view the complete line of vehicle
mounts, console boxes and docking stations.
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
The Armrest is height adjustable for better ergonomic
positioning. The padded armrest flips up to allow
access to the console box or cupholder if needed.
9. Accessories
The cupholder mounts to the front of the console box.
It holds two cups and is compatible with most cup
Extra Accessories:
Gamber-Johnson offers a variety of extra accessories
for the console box including LED lights, mic clips,
cigarette adapter kits and power distribution blocks.
(These are not included in the Vehicle Kits, must order
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF