CCTV Microphones and Audio Kits A

CCTV Microphones and Audio Kits A
CCTV Microphones and Audio Kits
A-3 MINI MICROPHONE
•
•
•
•
Add-on mini audio mic for all cameras that require an audio function.
High sensitivity microphone.
Easy to install and ideal for all security surveillance needs.
12VDC power supply is required and sold separately.​
SM5 AUDIO SURVEILLANCE KIT WITH INDOOR OMNI-DIRECTIONAL MICROPHONE
•
•
•
•
•
Indoor microphone.
Interface adapter.
12 VDC power adapter.
3’ RCA Patch cable.
Warning label.
Indoor Microphone Specifications
•
•
•
•
•
•
•
•
•
Omni-directional Electret element. 25’ range in all directions.
Low noise MOSFET pre-amplifier.
Line level, unbalanced output.
Adjustable gain.
Treble boost circuit. Selectable on/off. Enhances clarity of time lapse recordings.
Limiter circuit. Selectable on/off.
Easy cable run termination.
Flush or surface mountable. Can be mounted on a single gang electrical box.
Power: 12 VDC @ 10mA
Interface Adapter Specifications
• Standard RCA jack for connection to tape recorders, etc.
• Easy cable run termination.
• LED power indicator.
• Power:12 VDC @ 10mA
• Reverse polarity protected and fused.
Wiring Requirements
• Stranded 22-gauge, 2-conductor shielded cable.
SM5W AUDIO SURVEILLANCE KIT WITH OUTDOOR OMNI-DIRECTIONAL MICROPHONE
•
•
•
•
•
Outdoor microphone.
Interface adapter.
12 VDC AC adapter.
3’ RCA Patch cable.
Warning label.
Outdoor Microphone Specifications
• Weather resistant omni-directional microphone.
• Low noise MOSFET pre-amplifier.
• Adjustable gain.
• Line level unbalanced output.
• Limiter circuit selectable on/off.
• Easy cable run termination.
• Power: 12VDC @ 10mA.
Interface Adapter Specifications
• Standard RCA jack for connection to tape recorders, etc.
• Easy cable run termination.
• LED power indicator.
• Power:12 VDC @ 10mA
• Reverse polarity protected and fused.
Wiring Requirements
• Stranded 22-gauge, 2-conductor shielded cable.
SMI5 4 CHANNEL AUDIO SURVEILLANCE KIT
•
•
•
•
•
4 Indoor Pre-amplified microphones
Interface adapter.
12 VDC AC adapter.
4 3’ RCA or 3.5mm Patch cables.
Warning labels.
Indoor Microphone Specifications
• Omni-directional Electret element. 25’ range in all directions.
• Low noise MOSFET pre-amplifier.
• Line level, unbalanced output.
• Adjustable gain.
• Treble boost circuit. Selectable on/off. Enhances clarity of time lapse recordings.
• Limiter circuit. Selectable on/off.
• Easy cable run termination.
• Flush or surface mountable. Can be mounted on a single gang electrical box.
• Power: 12 VDC @ 10mA.
Interface Adapter Specifications
• RCA or 3.5mm jacks for connection to DVRs, Remote monitoring equipment, etc.
• Euro-style connectors makes cable terminations fast and clean.
• LED power indicator.
• Power:12 VDC @ 40mA
• Reverse polarity protected and fused.
• Dimensions: L 4.2 x W 2.7 x H 1.6.
Wiring Requirements
• Stranded 22-gauge, 2-conductor shielded cable.​
SM7 AUDIO SURVEILLANCE KIT WITH 4 INDOOR MICS WITH AMPLIFIED SWITCHER / MIXER
• 4 Indoor Pre-amplified microphones.
• 4 Channel Switcher / mixer / amplifier.
• 12 VDC AC adapter.
• 3’ RCA Patch cable.
• Warning label.
Indoor Microphone Specifications
• Omni-directional Electret element. 25’ range in all directions.
• Low noise MOSFET pre-amplifier.
• Line level, unbalanced output.
• Adjustable gain.
• Treble boost circuit. Selectable on/off. Enhances clarity of time lapse recordings.
• Limiter circuit. Selectable on/off.
• Easy cable run termination.
• Flush or surface mountable. Can be mounted on a single gang electrical box.
• Power: 12 VDC @ 10mA.
Switcher / Mixer Specifications
• In/out switches and level controls for each microphone channel.
• All settings stored in non-volatile memory.
• Standard RCA jacks for connection to tape recorders, etc.
• Easy cable run termination.
• 1 Watt Power amplifier.
• 3” speaker.
• Tape monitor switch.
• 3.5mm Headphone jack.
• Power: 12 VDC @ 250mA
• Dimensions W 5.5 x L 5.5 x H 1.5.
Wiring Requirements
• Stranded 22-gauge, 2-conductor shielded cable.
SM9 AUDIO SURVEILLANCE KIT WITH 8 INDOOR MICS WITH AMPLIFIED SWITCHER / MIXER
• Eight Indoor Pre-amplified microphones.
• 8 Channel Switcher / mixer / amplifier.
• 12 VDC AC adapter.
• 3’ RCA Patch cable.
• Warning label.
Indoor Microphone Specifications
• Omni-directional Electret element. 25’ range in all directions.
• Low noise MOSFET pre-amplifier.
• Line level, unbalanced output.
• Adjustable gain.
• Treble boost circuit. Selectable on/off. Enhances clarity of time lapse recordings.
• Limiter circuit. Selectable on/off.
• Easy cable run termination.
• Flush or surface mountable. Can be mounted on a single gang electrical box.
• Power: 12 VDC @ 10mA.
Switcher / Mixer Specifications
• In/out switches and level controls for each microphone channel.
• All settings stored in non-volatile memory.
• Standard RCA jacks for connection to tape recorders, etc.
• Easy cable run termination.
• 1 Watt Power amplifier.
• 3” speaker.
• Tape monitor switch.
• 3.5mm Headphone jack.
• Power: 12 VDC @ 300mA
• Reverse polarity protected and fused.
• Dimensions W 7.29 x L 7.00 x H 2.52.
Wiring Requirements
• Stranded 22-gauge, 2-conductor shielded cable.
AD-1 DIGITAL AUDIO CAT5 EXTENDER
• Support Dolby® Digital, dts®
• Used in Pairs via CAT5 UTP cable to send digital audio signal up to 180 meters.
• Gold-plated RCA connector.
• Passive, no power required.
• Sold in pairs.​
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising