Snapdragon 602A Automotive Development Platform

Add to my manuals
2 Pages

advertisement

Snapdragon 602A Automotive Development Platform | Manualzz

Snapdragon

602A

Automotive Development Platform

High-performance automotive infotainment platform

The Automotive Development Platform (ADP) based on the

Qualcomm® Snapdragon™ processor from Qualcomm

Technologies, Inc. (QTI) provides OEMs, Tier1s and ecosystem partners with access to QTI’s high-performance automotive infotainment platform for developing, testing, optimizing and showcasing next-generation infotainment solutions.

The Snapdragon processor includes four Krait™ CPUs, a

Qualcomm® Adreno™ 320 GPU and high-performance

Hexagon™ DSP. The ADP system also features rich connectivity through the 9x15 LTE modem, 802.11ac,

Bluetooth and GNSS. Also included are a 1080p display, 3 GB of RAM, 64 GB of high-speed eMMC storage. The ADP by default is configured with the Android operating system or can be provisioned by the user to support other OS offerings.

Benefits

ADP provides an optimized application development environment for rapid development of high performance and power efficient connected automotive infotainment offerings

The integrated system approach can help lower development costs

ADP High-Level Feature Overview

QTI’s automotive infotainment chipset based on the Snapdragon processor

QTI’s LTE modem connectivity via Tier2 LTE module

Qualcomm Atheros, Inc.’s Qualcomm® VIVE™ 802.11ac Wi-Fi support (two stream, dual band)

Bluetooth LE 4.1

GPS

Hardware-based video encoding and decoding

Support for audio post processing with the Hexagon DSP

Technical Specifications Overview

Automotive Infotainment Chipset based on the Snapdragon processor

– 602A Snapdragon Processor

– PMM8920 PMIC

– QCA6574 802.11/Bluetooth

– RGR7640 GPS Front End

Memory

– 4GB(3GB accessible)/2GB DDR3L-1066

– 64 GB eMMC

– 64MB SPI NOR Flash

– One SD card slot

– One SATA port

Display Outputs

– LVDS to FPDLINK III

– HDMI

– DSI to HDMI

– Touch screen on FDPLINK III display

– Additional touch screen with USB interface

Cameras Inputs

– FPD-LINK III Input with 2 Lane CSI interface

– CVBS video input with 1 Lane CSI Interface

Audio

– NXP Dirana3 car audio and radio system

– 6-ch audio output (speaker x4, line out x2)

– 4 microphone input

– 2 Line In input

– MDM modem audio support

– Early sound play with analog audio from the network processor

DESIGN|DEVELOP|BUILD

Qualcomm, Snapdragon, DragonBoard, and Adreno are trademarks of Qualcomm Incorporated, registered in the United States and other countries. Krait is a trademark of Qualcomm Incorporated. All Qualcomm Incorporated trademarks are used with permission.

Technical Specifications Overview (cont.)

Sensors

– Accelerometer, Compass

Wired Connectivity

– Atmel SAM4E/SAMV71 Network processor

– Ethernet AVB support (limited function with SAM4E)

– CAN interface x2, LIN interface x1

Wireless Connectivity

–WLAN: 802.11ac, 2.5GHz/5GHz

– BT LE 4.1

– GPS

WWAN

– MDM9x15 LTE module

Hard Keys

– Four SW definable buttons

– Power and reset buttons

Main board connectors

– 12V DC jack

– USB2.0: One micro OTG, three host type-A

– One SD card slot

– One SIM card slot

– One SATA connector

– JTAG, USB to UART debug connector

– Display: FDPLINK III x1, HDMI x2 (1080p x1, 720p x1)

– Camera: FPDLINK II x1, CVBS in x 3 (2 concurrent)

– Antenna: 2 WAN, 2 WLAN/BT, 1 GPS

– RCM connector

Radio board connectors

– Speaker amp DC power input

– Speaker output x4, Line output x2

– Microphone input x4

– Aux audio input jack

– Radio antenna connectors

Network board connectors

– Ethernet socket x1

– CAN connector x2, LIN connector x1

– 12V permanent power connector

Preinstalled Operating System

– Android 4.4 (KitKat)

Boot options - Quickboot – Unsecured

– Early Splash Screen @ 800ms

– Android Home Screen @ 10.5s

Display support

– Primary display over FPDLink III

– Secondary display over HDMI

– Third display: DSI to HDMI

Host Controllers

– USB 2.0 Host mode controller

Data storage options

– USB Mass storage

– SATA Driver

– SD Card & Hot plug support

Touch Screen

– TS Driver over FPDLink III with Primary Display

GPS support

– GPS DR-Enablement hooks for 3rd party Integration

Audio

– I2S audio integration with DiRaNa3

– Early Audio chime from Cold boot

Wi-Fi/BT

– QCA6574 for both WiFi and BT support

– Wi-Fi in station mode

– BT Profiles

– Miracast Sink & Source

WWAN

– LTE Modem Integration

CAN/LIN

–Basic CAN/LIN Integration

Not every feature listed here may be supported by the current version of software.

1 Android is a trademark of Google Inc.

2 HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

3 Qualcomm, Snapdragon, Adreno, Hexagon and VIVE are trademarks of Qualcomm

Incorporated, registered in the United States and other countries. Krait is a trademark of

Qualcomm Incorporated. All Qualcomm Incorporated trademarks are used with permission.

4 Other products or brand names may be trademarks or registered trademarks of their respective owners.

Intrinsyc Technologies Corporation

Suite 380 – 885 Dunsmuir Street

Vancouver, BC Canada V6C 1N5

Phone: (604) 801-6461

Email: [email protected]

To order go to www.intrinsyc.com/adp

Specifications are subject to change - ADP602A DS Rev. 1.0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement