Datasheet CameraLink Duplicator
CameraLinkTM Duplicator
Datasheet CameraLinkTM Base Line Duplicator
Key features
•
•
•
•
CameraLink Base video interface
up to 24-bit data (Tap A, B and C)
up to 66 MHz pixel clock
duplicates a CameraLink video input stream into two video output streams:
master and slave
• master video output stream includes:
video data and synchronisation
one RS-232 channel
control signals
• slave video output stream includes:
video data and synchronisation
General
The CameraLink Base Line Duplicator duplicates CameraLink video data into two identical video
streams: a master and a slave stream. Both streams can be used for processing or monitoring the
video data.
The Duplicator accepts CameraLink Base video, up to 24-bit data.
The CameraLink Duplicator transfers video data and timing signals to both outputs. Camera Control
signals and one full duplex serial communication channel (RS-232) are transferred to the master
output only.
It is a transparent interface, compatible with all available CameraLink Base cameras and third party
framegrabbers that comply with the CameraLink specification.
System
computer A
add on board
master
CameraLink
framegrabber
CameraLink
Base Line
Duplicator
CameraLink
camera
slave
computer B
add on board
CameraLink
framegrabber
The generated CameraLink signals of the camera will be duplicated to two CameraLink
streams: master and slave. These streams are transmitted to two computers with a CameraLink
framegrabber. The CameraLink - CameraLink Duplicator - master output path is entirely transparent,
delays are not introduced.
ARVOO Imaging Products BV
P.O. Box 439
3440 AK Woerden
The Netherlands
email: [email protected]
website: www.arvoo.com
rev. 1.0
032004
CameraLinkTM Duplicator
Architecture
CameraLink Duplicator
master
input
CameraLink
CameraLink
video data,
sync
video
CC1..CC4
Camera
Control
SERTC
SERFG
serial
CameraLink
Duplicator
master
input/output
video
video data,
sync
Camera
Control
CC1..CC4
serial
SERTC
SERFG
CameraLink
video
slave output
video data,
sync
Technical Specifications
CameraLink Base Line Duplicator
DUP CL-24
CameraLink interface
Pixel data
Pixel clock
Video timing
Camera Control*
Serial
Communication*
CameraLink
Connector
Base 24 (tap A, B, C)
up to 24-bit
up to 66 MHz
FVAL
LVAL
DVAL
STROBE
CC1 to CC4
SERTC
SERTFG
MDR 26-pins
General
Power connector
Dimensions
(l x w x h)
Supply voltage
Power consumption
Operating
temperature
* not available at slave output
4-pins subminiature round male connector
Thomas & Betts: subminiature connector Triad '01'
Binder: subminiature 'Circular Series 712'
105 x 105 x 38.9 mm
5 V to 12 V
3W at 6V, typical
00 C to 700 C
Options
DIN-rail enclosure
4 screw mount enclosure
ARVOO Imaging Products BV
Datasheet CameraLink Duplicator
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement