Panasonic BBHCE481 Datasheet
PoE Type Network Camera BB-HCE481 Indoor Use Only *AC adaptor not included. * This logo mark is issued by the IPv6 Ready Logo Program Committee, an IPv6 promotion group established mainly by the IPv6 Forum. FACTORIES ENTRANCES PARKING LOTS WAREHOUSES No AC Wiring Necessary No Power Plug or Outlet Necessary Now you can install a network camera even in places with no power outlet. The BB-HCE481* receives power through the Ethernet cable, so it eliminates the cost of electrical wiring and lets you install it anywhere you want. Since the BB-HCE481 also supports IPv6, you can use it with IPv4 for now, and then switch to IPv6 when it becomes available in the future. * The BB-HCE481 works with the PoE Hub only. It has no terminal for an AC adaptor. Bring Any Image Right Up Close 42x Internet Multi-Camera Capability Check the images from three sets of four cameras each. BB-HCE481 Panasonic Meets Your Needs. A Total Monitoring Solution in the BB-HCE481. Give instructions as you watch. Covers a wide monitoring area. Audio 2-Way Communication Remote Pan/Tilt/Zoom Control By connecting the optional speaker and microphone, you can converse* while viewing the monitor screen. This allows more precise communication. For example, you can accurately troubleshoot problems in a warehouse or factory, or give instructions for urgent store display changes. The BB-HCE481 displays a full 360° range horizontally. It pans from -175° to +175°, and tilts 158° vertically. This allows a single BB-HCE481 to cover a wide area so you need fewer cameras, which lowers equipment costs. The BB-HCE481 is also equipped with a 42x zoom function that lets you see images up close for detailed viewing. * Walkie-talkie type conversation. <<Head office>> Speaker Mic PC How does the sales display look? Internet Let's make the aisle a little wider. Speaker SALE Table mounted Pan (display range: 360°max) Tilt (display range: 158°max) SD Memory Card* Recording SALE A 2GB SD Memory Card holds up to 115,000 images. If you use a 1-minute interval timer buffer/transfer, you can record images for about 80 days. This lets you check changes over time, in detail. The SD Memory Card can also be conveniently carried around. <<Supermarket>> * The SD Memory Card is sold separately. The camera supports 2GB, 1GB, 512MB, 256MB, 128MB and 64MB Panasonic SD Memory Cards. Use as a security measure. Number of recording files per SD Memory Card Color Night View Mode (Image quality: Standard) The BB-HCE481 camera automatically adjusts the image brightness for monitoring in dark places that are difficult to see clearly, like dimly lit factories and warehouses at night. Since you can monitor down to a brightness of only 0.09 lux, you can use the BBHCE481 as an effective security measure. OFF Resolution SD Memory Card ON 640 x 480 320 x 240 160 x 120 2GB 55,000 images 115,000 images 370,000 images 1GB 28,000 images 58,000 images 180,000 images 512MB 14,000 images 29,000 images 94,000 images 256MB 7,000 images 14,000 images 47,000 images 128MB 3,000 images 7,000 images 23,000 images 64MB 1,000 images 3,000 images 11,000 images *The operation of SD Memory Cards not listed above cannot be guaranteed. System diagram Power over Ethernet hub Pan (display range: 360°max) Tilt (display range: 128°max) Large image storage capacity. Mic Network camera BB-HCE481 Ceiling mounted [Other Features] Motion Detection & Image Transfer Mode The BB-HCE481 can start recording images as soon as it detects motion. Recorded images can also be sent by e-mail* or transferred via FTP for remote confirmation. * POP before SMTP authentication and SMTP authentication (PLAIN and LOGIN) are supported. SMTP authentication (CRAM-MD5) is not supported. Plug & Play, Simple Ethernet Connection The BB-HCE481 supports UPnP. Setup is extremely simple, thanks to the supplied automatic setup CD and the free DDNS service offered by Panasonic. See www.viewnetcam.com for details. Video Output You can connect the camera to a TV or VCR and watch or record camera images. Audio/Video Cable (Included) Video Output Speaker Output Microphone Input IPsec* Supported In addition to authentication based on a conventional ID and password system, packet encryption is also used to bolster security and inhibit eavesdropping. * IPsec is an IP security protocol for data encryption standardized by IETF, an international community devoted to the standardization of Internet specifications. Part Names To use the BB-HCE481, you also need Internet access equipment and the Power over Ethernet Hub. Broadband router Modem Internet Audio/Video terminal PoE in port I/O connector Specifications [BB-HCE481] Server Network camera Terminal Image Compression JPEG Zoom Maximum 42x (21x optical, 2x digital) Network Interface Video Streaming Format Motion JPEG Viewing Angle Tele: 2.6° (Optical)/1.3° (Digital) External I/O Connector 2 Input / 1 Output Video Resolution 640 x 480, 320 x 240, 160 x 120 Pan (Horizontal Direction) -175° up to +175° Analog Video Output 3.5 mm Mini Jack Image Quality 3 modes (Favor clarity, standard, favor motion) Tilt (Vertical Direction) Max. 12 frames/sec. (640 x 480) *2 Max. 30 frames/sec. (320 x 240 or 160 x 120) -120° up to 0° (On the table), 0° up to +90° (On the celling) SD Memory Card Slot Frame Rate *1 Full size (operation guaranteed for 2GB, 1GB, 512MB, 256MB, 128MB and 64MB SD Memory Cards) Pan/Tilt Speed Pan: Max. 300°/sec, Tilt: Max. 200°/sec Operating Temperature 32°F to 104°F (0°C to +40°C) Image Sensor 1/4 inch, approx. 380,000 pixels, CCD sensor Operating Humidity 20% to 80% (No condensation) Focus Auto/Manual (40 steps) Dimensions (H x W x D) Aperture F1.6 (Wide) -3.6 (Tele) 140 x 123 x 123 mm (5-1/2 x 4-13/16 x 4-13/16 inches) Weight (Only the unit) 650 g (1.43 lb) Power Source IEEE802.3af-compliant power over Ethernet Power Consumption 11 W Security IPsec Function User ID/Password/IPsec *3 ESP encryption, ESP authentication, transport mode (main mode only)/tunnel mode IKE (Internet Key Exchange) Supported Protocols Illumination 3 to 100,000 lux (in color night view mode: 0.09 to 100,000 lux) IPv4/IPv6 dual stack Audio IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, IPsec, UPnP IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, IPsec Max User Access Image Transfer *1 *2 *3 *4 Max. 30 simultaneous accesses (max. 10 accesses with voice reception) E-mail/FTP Ethernet (10Base-T/100Base-TX) General 2-Way Audio Half Duplex System requirements for viewer PC Codec ADPCM 32 kbps Operating System Frequency Range 300 Hz ~ 3.2 kHz Audio Input Built-in microphone or external microphone (sold separately), external microphone input terminal (3.5-mm dia. mini-jack) IPv4: Microsoft® Windows® 98SE, 2000, Me, XP IPv4 IPsec: Microsoft® Windows® 2000. Me, XP professional IPv6: Microsoft® Windows® XP professional Service Pack1 or later (IPsec is not available) Web Browser Internet Explorer 6.0 or later Audio Output *4 Audio line output terminal for external speaker (3.5-mm dia. stereo mini-jack, monaural output) This varies depending on the subject, image quality, network environment, PC performance, etc. The image update speed may decrease when motion-priority mode is set, when images are recorded onto an SD Memory Card, and when IPsec is used, as well as due to the network environment and PC performance. Transport mode (mode for IPsec communication between terminals, for IPv4 only) operating environment: Microsoft® Windows® XP Service Pack 1 only, tunnel mode (mode for IPsec between VPN routers, IPv4/IPv6) Install an amp or use a speaker with a built-in amp. 0M1105SP-HCE481-LTl.US http://panasonic.co.jp/pcc/products/en/netwkcam/ All images simulated. Design and specifications are subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project