material handling products
MATERIAL HANDLING PRODUCTS
Tablet mounted using a
dual clam shell with a 3”
arm and small plate
7160-0420
Gamber-Johnson is a leading manufacturer of
rugged mounting solutions for computers
We offer a variety of ergonomic mounts that can be configured for your specific material
handling vehicle. We have an assortment of products designed to securely mount fixed
vehicle computers, tablets, displays, laptops, keyboards, mobile handheld scanners, and
safety lights.
Whether you want to mount your device horizontally on the overhead guard leg, vertically
from the overhead guard, or anywhere else, Gamber-Johnson has a solution that will fit
your needs.
All Gamber-Johnson products are tested to ensure they work flawlessly, even in the
most rugged environments. The mounts are made to be durable and can hold a system
weighing more than 20 lbs horizontally off the overhead guard leg without a problem.
Let us help you pick out your mounting solution
Every day, we work with people like operations managers, warehouse managers, and IT
managers to pick out the right solution for their unique material handling needs. Send
us an email or drop us a line and we’ll help you come up with a solution that fits your
budget, time line, and vehicles.
RUGGED
MOUNTING
SOLUTIONS
gjforkliftmounts.com
[email protected]
888.924.3309
Tablet mounted in
a TabCruzer Mini
7160-0774
Clam Shells
Gamber-Johnson uses the clam shell motion attachment
to secure your tablet, printer, handheld scanner, or
monitor directly to your overhead guard leg.
In addition to securely mounting your device, clam shells provide 90
degrees of tilt, meaning you can adjust your device flat back, straight
up, and in any position in between. For even more articulation, you can add
another clam shell.
Docking station mounted using a
dual clam shell 7160-0366 on a
roll form bracket 7160-0418
CLAM
SHELL
MOUNTING
SYSTEMS
7160-0357
Clam shell with
small backer
plate
7160-0370
Clam shell with
large backer
plate
All clam shells have AMPS, NEC, VESA 75mm, and Gamber-Johnson’s
2” x 4” hole pattern options for attaching your device on a mounting system.
Single clam shell
Easily attach your device, dock, cradle, or interface plate. Once
attached, you can adjust the angle of your device up or down to create
a more ergonomic solution.
Dual clam shell
Increase your tilt, swivel, and rotation options. With the addition of the
second clam shell, you can not only tilt your device up or down, but you
can angle your screen slightly back towards the overhead guard leg so
you can see it better.
Dual clam shell with a 3” arm
This mount features a 3” arm between the two clam shells which helps
to bring the device closer to you. The arm adds an additional swivel
point allowing you to position the device at the optimal ergonomic position.
7160-0366
Dual clam shell
with small backer
plate
7160-0367
Dual clam with
large backer
plate
7160-0420
Dual clam shell
with 3” arm small backer
plate
7160-0421
Dual clam shell
with 3” arm large backer
plate
Which size backer plate do you need?
The width of the overhead guard leg will determine what size you will use.
The smaller backer plate is recommended for overhead guard leg width
ranging from 1.5” to 2.5”. The larger backer plate is recommended for
overhead guard leg width ranging from 2.5” to 5.0”.
GJFORKLIFTMOUNTS.COM
Computer mounted using a roll formed
bracket 7160-0418 and a dual clam
shell with 3” arm 7160-0420
Horizontal extension bracket
Display your device up to 15” horizontally off the
overhead guard leg.
It’s a superb solution for mounting heavier computers and
keyboards. Can be used with the clam shell with the small
plate, dual clam shell with small plate, dual clam shells
with 3” arm with small plate, or barcode/handheld computer mounts.
7160-0363
Horizontal
extension bracket
Roll formed brackets
Mount on a roll formed overhead guard leg.
Can be used with the clam shells (small or large), dual
clam shells (small or large), dual clam shell with 3” arm
(small or large), barcode/handheld computer mounts, or
the horizontal extension bracket.
Computer mounted using an
overhead guard mount 7160-0368
7160-0418
Roll formed bracket
7160-0814 (new)
Custom roll formed
bracket for special
Jungheinrich/CAT
models
BRACKETS,
CLAMPS, &
OVERHEAD
GUARD
MOUNTS
7160-0815 (new)
Roll formed bracket
for Linde forklift
models EV-30 and
EV-40
Overhead Guard Mounts
Mount your device overhead and out
of the way.
The overheard guard mounts are the most popular
Gamber-Johnson mounting options for material handling.
They all come with at least one clam shell so you can
adjust the angle of your device.
Short with a single clam shell
Tube clamp
Compatable with 2”, 2.5” or 3” diameter tube
Mount on a tube style overhead guard leg.
The tube clamp can be used with small or large clam
shells, dual clam shells, dual clam shells with 3” arm,
barcode/handheld computer mounts, or the horizontal
extension bracket. The tube clamp allows the clam shell
to be mounted in a horizontal or vertical orientation.
7160-0561
2”, 2.5”, or 3”
diameter tube
clamp
Best solution when you need to mount your device
closer to the ceiling of the vehicle.
7160-0585
Short overhead
guard mount with
single clam shell
7160-0586
Short overhead
guard mount with
dual clam shell
Short with a dual clam shell
Mounts the device close to the ceiling, but has a
second clam shell that gives you additional device
articulation.
Extended with a single clam shell
7160-0368
Extended
overhead guard
mount with clam
shell
Brings your device further down 8” down off the overhead guard for easier viewing.
GJFORKLIFTMOUNTS.COM
Your Gamber-Johnson products are
assembled, packaged, and shipped
from our plant in Wisconsin. This
typically takes only 72 hours - one
of the fastest turn-around times in
the industry.
Tablet mounted using a
NotePad V-LT with cam back clips
7160-0402-03
Universal Cradles
Securely mount your tablet, notebook,
or rugged laptop to your mounting
solution in 5 minutes or less.
7160-0402-03
NotePad V-LT universal
computer cradle with cam
back clips
The NotePad™ V is Gamber-Johnson’s universal laptop
cradle. It’s a heavy-duty extruded aluminum universal
cradle that’s adjustable to fit just about any laptop.
NotePad V-LT with cam back clips
Fits just about any small laptop or tablet computer. You
can easily adjust the cradle to fit any device as small as
6.63” x 8.3” to as large as 8.0” x 11.8”. The depth is also
adjustable and fits thin computers up to 1.5”. It’s a light
weight unit (only 5.5lbs) but as tough as nails.
7160-0402-01
NotePad V-LT universal
computer cradle with zero
edge clips
UNIVERSAL
MOUNTING
CRADLES
NotePad V-LT with zero edge clips
The universal cradle fits smaller laptops, netbooks, and
tablets; the zero edge clips will not interfere with control
features located close to the edge of the computer. It’s
adjustable to fit laptops from 7.58” x 8.2” and those as
large as 9.33” x 11.8”. The depth is also adjustable and
fits laptops as thin as 0” to 1.5”. It’s a light weight unit
(only 5.5 lbs) but as tough as nails.
TabCruzer® Mini (new)
7160-0774
TabCruzer Mini - universal
tablet cradle
This new universal cradle is designed to hold a standard
consumer tablet computer between 0.2” and 0.7” thick.
It comes with slide clips which easily adjust the cradle to
fit a tablet from 6.9” x 4.4” up to 11.2” x 8.2”.
GJFORKLIFTMOUNTS.COM
Barcode scanner mounted
using a 7160-0499-01
Safety Light
Brackets
The light bracket attaches to the overhead guard and
allows lights to be mounted in multiple orientations. The
brackets can be used with overhead guard supports
that are 2” to 5” wide. They also provide 4.75” of travel up and down. The clam shell provides articulation
that allows lights to be mounted in locations where the
mounting surface is at an angle.
EXTRA
MOUNTS
Barcode and Handheld
Computers
7160-0610
Single safety light
bracket (fits most
brands of safety
lights)
7160-0611
Dual safety light
bracket (fits most
brands of safety
lights)
Handheld computer mounts attach
directly to the overhead guard leg
allowing you to keep your wired or wireless device within easy reach.
Printer mounted using
a 7160-0785
Printer Mounts
Attach a printer mount to your vehicle
using a Gamber-Johnson clam shell.
Position the bracket so your printer sits horizontally or
vertically. The bracket is designed to not impede paper
feed, printer ports, or your power connection.
Upper only mount
Quickly access your device using a slide-and-go
motion. The upper section has a forward restraint to
protect the IR lens from damage and prevents the trigger
from being activated while in motion.
7160-0609
Dual safety light
bracket with clam
shell (fits most
brands of safety
lights)
7160-0608
Single safety light
bracket with clam
shell (fits most
brands of safety
lights)
Upper-lower mount
The combination mount has the upper mount plus an
adjustable lower section that can be moved into the
position you desire.
7160-0499-01
Barcode scanner/
mobile computer
mount - upper only
7160-0499
Barcode scanner/
mobile computer
mount - upper and
lower
7160-0793
Honeywell RL4
quick release
printer mount
system
7160-0817
Zebra QLn20
printer bracket
7160-0795
SATO MB410i-W2
printer bracket
7170-0517
SATO MB410i-W2
quick release
printer mount
system
7160-0785
Datamax O’Neil
MP compact 4
Mark II printer
bracket
GJFORKLIFTMOUNTS.COM
Lind power supplies
Power your computer or other
peripheral using an isolated power
adapter compatible with your DC
power source.
15202 12-32V Panasonic
15203 20-60V Pansasonic
16078 20-60V Getac
16079 12-32V Getac
16411 12-32V Zebra
16412 20-60V Zebra
2” tube clamp
15065
Mount any clam shell to a
tube-style overhead guard leg 2” in
diameter.
Intermec CV61 interface plate
Computer with a keyboard
arm attachment 7160-0550
OTHER
ADD-ONS
Mount your CV61 all-in-one
computers on any clam shell.
7160-0493
Quick release mount
Quickly remove any computer or
tablet mounted to a clam shell
without using tools.
7160-0593
Keyboard arm
Attach a keyboard to the underside
of a clam shell against the
overhead guard leg of your forklift.
7160-0550
Keyboard tablet mount
Combine a keyboard and any
Gamber-Johnson docking station/
cradle together on your forklift
mount.
7160-0799
PARTNERING WITH
12480 Superior Court #4
Holland, MI 49424
(616) 796-1288
[email protected]
intellaliftparts.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement