Transcend | TS0GSJ35 | Datasheet | Transcend STOREJET (3.5" IDE-HDD,Sliver)

Transcend STOREJET (3.5" IDE-HDD,Sliver)
TS0GSJ35
StoreJet™ 35
Description
System Requirements
TS0GSJ35 is the Transcend StoreJet™ 3.5” IDE hard
• Desktop or notebook computers with USB port
disk enclosure. This device is designed to expedite
• One of following operating systems:
exchanging huge amounts of data between Transcend
Windows 98SE, Windows ME/2000/XP,
StoreJet™ and any desktop or notebook computer.
Mac OS 9.0 or above
Linux Kernel 2.4 or above
Placement
Features
• Fully compliant with USB 2.0 specification
• Fully backward compatible with USB 1.1 specification
• 100% compatible with USB interface in Windows or Mac
• High transfer rate up to 480 Mbits per second
• Easy plug and play installation
• Powered by 12V/5V Switching Power Adapter
• LEDs indicate power on and data access
• Recommended operating temperature: 5°C ~ 60°C
Dimensions
Side
Millimeters
Inches
A
198.50 ± 1.00
7.81 ± 0.04
B
123.40 ± 1.00
4.86 ± 0.04
C
35.00 ± 1.00
1.38 ± 0.04
DC Jack Pinouts
Transcend Information Inc.
1
Pin No.
Function
01
+12V
02
+5V
03
GND
04
GND
TS0GSJ35
StoreJet™ 35
Block Diagram
Transcend Information Inc.
2
TS0GSJ35
StoreJet™ 35
Pin Identification
Pinouts
Pin No.
Pin Name
01
VCC
02
USB-
03
USB+
04
VSS
Symbol
USB-
Function
USB differential signal
VCC
The pairs are used to transmit
Data/Address/Command
VBUS_PWR_VALID
VSS
Ground
USB+
Specifications
Environment
3.5 inch IDE Hard Disk
Storage Media
Temperature
System Performance
Power Supply
Operating
5 ℃ to 60 ℃
Storage
-40 ℃ to 70 ℃
Read Speed
23 MB/sec (Max.)
Write Speed
17 MB/sec (Max.)
Switching Power Adapter
AC input: 100V-240V
DC output: 12V/5V 2A
198.5mmx123.4mmx35mm
Size (L x W x H)
Weight
Without Hard Drive
Max. 450g
Humidity
8% to 90% RH
Certificates
CE, FCC, BSMI
Transcend Information Inc.
3
TS0GSJ35
StoreJet™ 35
Absolute Maximum Ratings
Symbol
Range
Storage Temperature
Ambient Temperature with Power Supplied
Power Dissipation
Static Discharge Voltage
Max Output Current Per I/O Port
Unit
-65 ~ 150
°
0 ~ 70
°
C
C
300
mW
> 2000
V
10
mA
DC Characteristics
Parameter
Description
Min.
Typ.
Max.
Unit
3.00
3.3
3.60
V
VCC
Supply Voltage
VIH
Input High Voltage
2
5.25
V
VIL
Input Low Voltage
-0.5
0.8
V
±10
μA
II
Input Leakage Current
VIH_X
Crystal Input High Voltage
2
5.25
V
VIL_X
Crystal Input Low Voltage
-0.5
0.8
V
VOH
Output Voltage High
2.4
VOL
Output Voltage Low
0.4
V
IOH
Output Current High
4
mA
IOL
Output Current Low
4
mA
ISUSP
ICC
IUNCONFIG
V
Suspend Current for Connected
0.5
1.2
mA
Suspend Current for Disconnected
0.3
1.0
mA
Supply Current for USB High Speed
50
85
mA
Supply Current for USB Full Speed
35
65
mA
Unconfigured Current
43
mA
Above technical information is based on industry standard data and tested to be reliable. However, Transcend makes
no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this
product. Transcend reserves the right to make changes in specifications at any time without prior notice.
Transcend Information Inc.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising