Atlas IED TSD-MIX32RL Owner's Manual
The Atlas IED TSD-MIX32RL is a 3x2 stereo line mixer with Remote level control. It is ideal for applications where multiple stereo line sources need to be combined into a preamp utilizing the local or remote Master level control. The unit can be easily interfaced with AtlasIED amplifiers. Applications include restaurants, conference rooms, and schools.
Advertisement
Advertisement
Owner’s Manual
TSD-MIX32RL
Stereo Line Mixer with Remote Level
TSD-MIX32RL
3x2 Stereo Line Mixer with Remote Level
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Owner’s Manual
Description
The AtlasIED TSD-MIX32RL is a 3x2 stereo line mixer with Remote level control. It is ideal for applications where multiple stereo line sources need to be combined into a preamp utilizing the local or remote Master level control. The unit can be easily interfaced with AtlasIED amplifiers.
Applications include restaurants, conference rooms, and schools.
Additional on board EQ can be done utilizing the Base control (100Hz ±6db) and Treble control
(10KHz ±6dB). The TSD-MIX32RL uses high quality, low noise components to ensure clarity and quiet operation without unwanted coloration.
The TSD-MIX32RL is part of a full line of AtlasIED Time Saving Devices. These compact
(1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in the easiest, most efficient, and cost-effective way. All models are made from high quality components and include removable individual I/O connectors for quick and precise wiring, separate ground terminals for all I/Os assuring secured connections, and removable level controls that can be replaced with tamper-resistant security covers. The TSDs are highly efficient and meet most energy standards as one 24V DC power supply (available separately) can power multiple Atlas Time Saving
Devices.
Features
• Three Stereo Unbalanced Line Inputs, One
Set of RCA and Two 3.5mm (
1
⁄
8
")
• Balanced Line Outputs Left & Right
• Unbalanced Line Outputs Left & Right
• Output Peak & Signal Indicator LEDs
• Input Signal Indicator LEDs, Qty 3
• Base & Treble Controls ±6dB
• Remote Master Level Control
• High Gain Output for Driving Long
Balanced Lines
• Separate Ground Connections
• Security Covers Included for All Front
Panel Controls
• Cable Management System
• Multiple Mounting Configurations
• Removable Phoenix Style I/O Connectors
• Meets Most Energy Standards
• Compact Chassis Design
Audio Aplications
• Stereo Mixer
• Source Preamp
• Remote Level Control
• Line Driver
Installation
• Restaurants
• Sports Bars
• Schools
• Industrial Facilities
• House of Worship
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 2 –
Specifications are subject to change without notice.
Owner’s Manual
Front Panel Description
TSD-MIX32RL
Stereo Line Mixer with Remote Level
5
4
1
2 3 6 7
1. Power LED - Illuminates Blue when 24VDC power is present.
2. Inputs 1-3 Level Controls - Each input has a stereo rotary level control that is independent of
the other input controls. Turn clockwise to increase signal and counterclockwise to decrease
signal. Each level control has a removable knob that fits onto the shaft. Level adjustments can
also be made via the screw driver slot on the potentiometer shaft. Note: Each Input has a security
cover included with the TSD to prevent tampering.
3. Mixed output Level Control - The MIX32RL has a stereo rotary output level control. The
level control is the summed signals of the three inputs. Turn clockwise to increase signal and
counterclockwise to decrease signal. Each level control has a removable knob that fits onto the
shaft. Level adjustments can also be made via the screw driver slot on the potentiometer shaft.
Note: The Output has a security cover included with the TSD to prevent tampering.
4. Output Signal LED - Illuminates Green when there is 25mV of signal present at the output.
Note: The LED will not illuminate if the Output Level is turned OFF.
5. Output Peak LED - Illuminates Red when the output signal reaches -3dBV before signal clipping.
An occasional flash is ok, but if the LED is on steadily, reduce the input or output level until the
LED is OFF.
6. Bass Control - 100Hz ±6dB, center point flat.
7. Treble Control - 10Hz ±6dB, center point flat.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
Rear Panel Description
7
TSD-MIX32RL
Stereo Line Mixer with Remote Level
5
Owner’s Manual
2
7
7 7
1 4 6 3
TSD Input/Output connections are removable for easy system wiring. The connectors have a 3.5mm pitch between pins.
1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for an
external 24VDC power supply (sold separately). Because of the TSD’s low power consumption, a
single external power supply may power more than one TSD. Please refer to the specifications
on current requirements in milliamps to match with the appropriate power supply. Please observe
the polarity of the wiring to this connector. Note: It is acceptable to exceed the current
requirements of the TSDs but NOT safe to use a power supply that is below the current
requirement of the device.
2. Input 1 RCA Stereo Unbalanced - Left & right line level input.
3. Inputs 2 & 3 Stereo Unbalanced 3.5mm (
1
⁄
8
") - Left & right line level input.
4. Left & Right Balanced Line Outputs - Balanced line level signals are to be connected to the
proper terminals. The connections between devices must be mated properly to the input
connectors or signal loss and/or noise may be introduced. Note: Unbalanced line level inputs can
be inserted by using the following wire configuration: Tie (short) the (G) and (-) terminals together.
5. Main Output RCA - Left & right unbalanced line outputs.
6. Remote Level - For remote gain control, connect the AtlasIED AAVC-10K (or equal) wall plate to
these terminals. Distance can be up to 200 ft.
7. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing
the included cable management retainers. Remove one of the rear panel screws, align the
panel hole with a retainer and firmly tighten the screws.
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 4 –
Specifications are subject to change without notice.
Owner’s Manual
Cable Management
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Knob and Security Cover
All front panel level controls feature a removable knob that can be replaced with an included security cover. Follow these steps to prevent potentiometer damage or unwanted changes.
1. Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator
to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto
the potentiometer shaft. Do not force or damage may occur to the potentiometer.
2. Security Cover Installation - Remove the knob from the panel and insert the cover. Small pliers may
be required to remove the knobs. Align the security cover to the level control panel hole. Push the
cover into the hole until it snaps into place. Do not force or damage may occur to the potentiometer.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Owner’s Manual
Mounting
Listed below are the ways to mount the TSD and the optional accessories that can be purchased.
1. Velcro™ - Each unit includes two 2" x 2" pieces of industrial-grade Velcro™ with adhesive backing
to adhere to any flat surface. Clean all surfaces before applying the adhesive side of the Velcro™.
2. Multi Mount Plate - Each TSD includes a versatile multi-position mounting plate. This plate
allows the TSD to be mounted to any surface; but is ideal for use with rear rack rails or side rack
hat channels. Use the included M3 x 4mm screws to install the plate on the TSD. Note: Only use
the included M3 x 4mm screws as other screws may be too long and will cause internal damage
to the TSD. The multi-position mounting plate is a new addition being included with TSDs. If the
TSD being used did not include the mounting plate, contact AtlasIED customer service at
1-800-876-3333.
(M3 x 4mm)
(M3 x 4mm)
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 6 –
Specifications are subject to change without notice.
Owner’s Manual
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Optional Mounting Accessories
1. TSD-RMK 19" Width Rack Mount Kit - For 19" rack mounting, AtlasIED offers an optional rack
mount kit, the TSD-RMK. This rack mount kit can support up to four TSD units. The kit includes
three blank panels designed to fill any unused slots. Use the included hardware to mount the TSD
into the rack mount kit using the top mount screw holes on the TSD.
2. TSD-RMKHR Half Width Rack Mount Kit - AtlasIED offers an optional rack mount kit that can
be used in half width rack applications including the AtlasIED WMA-HR and AWR-HR models.
The TSD-RMKHR can support up to two TSDs. Included is an extra blank panel to fill one of the
spaces if only one TSD is being used.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Owner’s Manual
3. TSD-RRMK Rear Rack Mounting Kit - For complete flexibility in mounting a TSD or TSD external
power supplies the optional TSD-RRMK is available. The TSD-RRMK can support mounting of
either two larger TSDs with external power supplies or up to 4 TSD models. Note: Only use the
included M3 x 4mm screws as other screws may be too long and will cause internal damage to
the TSD.
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 8 –
Specifications are subject to change without notice.
Owner’s Manual
Block Diagram
OP
RCA
INPUT 1
OP
OP
INPUT 1 LEVEL
OP
INPUT 2
3.5mm PORT
OP
OP
INPUT 2 LEVEL
OP
INPUT 3
3.5mm PORT
OP
OP
INPUT 3 LEVEL
DC INPUT
+
DC
POWER LED
TSD-MIX32RL
Stereo Line Mixer with Remote Level
TREBLE
OP
MIX BUSS AMP
BASS
OP
TREBLE
OP
BASS
OP
OP
OP
MASTER
LEVEL
OP
SIGNAL PEAK
OP
OP
RMT LEVEL
OP
OP
G
– L
+
G
– R
+
MAIN OUTPUT
L
R
MAIN OUTPUT
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Owner’s Manual
Specifications
Description
Chassis Color
Chassis Material
3 x 2 Stereo Line Mixer with Remote Level
Black
Aluminum
Inputs
Type Qty 1, Unbalanced RCA Left & Right
Type Qty 2, Unbalanced 3.5mm Stereo
Impedance 10kΩ Balanced
Unbalanced Line Input
Maximum Input
300mV (-10dB) = 1.5V (3dBV) Output
1.5V (3dBV)
Outputs
Type
Connection
Qty 2, Balanced Line
Impedance 300Ω Balanced, 150Ω Unbalanced
Maximum Output Balanced
Removable 3 Position Captive Screw 3.5mm Spacing
5V (14dBV)
Type Qty 2, RCA Unbalanced Line
Impedance 150Ω Unbalanced
Unbalanced Line Output 300mV (-10dB) = 1.5V (3dBV) Output
Maximum Output Unbalanced 5V (14dBV)
Controls
Input Level Control
Output Level Control
Bass Trim
Treble Trim
Qty 3, Removable Knobs with Security Covers
Qty 1, Removable Knob with Security Cover
Front Panel (recessed) ±6dB 100Hz
Front Panel (recessed) ±6dB 10kHz
Indicators
Input Signal
Output Signal
Output Peak
Power
Electrical
Frequency Response
THD
Signal to Noise
Green, 25mV ON Threshold, Qty 3
Green, 25mV ON Threshold, Qty 1
Red, -3dB Before Clip, Qty 1
Blue, Qty 1
20Hz - 20kHz (±1dB)
.06% @ 1kHz
Line to Line: 85dBV
Power Requirements
Voltage 24VDC, 60mA
Power Consumption Current 60mA
Power Consumption VA Watts 1.4W
Dimensions
Weight
H 1.5" (39mm) x W 4" (101mm) x D 2.75" (70mm)
6oz, .165kg
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 10 –
Specifications are subject to change without notice.
Owner’s Manual
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Included Accessories
Velcro™ Industrial-Grade
Multi-Mount Plate
Cable Retainers
Qty 1, Includes Two (2) M3 x 4mm Screws
Qty 2
Level Control Knobs Qty 4
Level Control Security Covers Qty 4
Optional Accessories
TSD 24VDC
TSD-RMK
TSD-RMKHR
TSD-RRMK
Safety and Certifications
External Power Supply
Power Supply
1 RU 19" Width Rack Mount Panel (Supports 4 TSD Units)
1 RU Half Rack Width Panel (Supports 2 TSD Units)
Rear Rack Mounting Kit cUL, CE, RoHS, TUV
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Specifications are subject to change without notice.
TSD-MIX32RL
Stereo Line Mixer with Remote Level
Owner’s Manual
Limited Warranty
All products manufactured by AtlasIED are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for a period of three years on all AtlasIED products, including SOUNDOLIER brand, and ATLAS SOUND brand products except as follows: one year on electronics and control systems; one year on replacement parts; and one year on Musician Series stands and related accessories. Additionally, fuses and lamps carry no warranty. AtlasIED will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed in other than a workman like manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to AtlasIED do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any nonwarranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges collect.
EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL
DAMAGES FOR PERSONAL INJURY, ATLASIED SHALL NOT BE LIABLE IN TORT OR CONTRACT
FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE
INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF
ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
AtlasIED does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
Service
Should your Atlas TSD require service, please contact the AtlasIED warranty department at 1-877-689-8055, ext. 277 to obtain an RA number.
AtlasIED Tech Support can be reached at 1-800-876-3333 or support.atlasied.com.
Visit our website at www.AtlasIED.com to see other Atlas products.
©2017 Atlas Sound L.P. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P.
IED is a registered trademark of Innovative Electronic Designs LLC. All Rights Reserved.
All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004401 RevB 4/17
AtlasIED.com
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 12 –
Specifications are subject to change without notice.

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 3x2 stereo line mixer with Remote level control
- Balanced Line Outputs Left & Right
- Unbalanced Line Outputs Left & Right
- Output Signal LED - Illuminates Green when there is 25mV of signal present at the output
- Base & Treble Controls ±6dB
- Remote Master Level Control