User Guide - NVMS Mobile client 2016 R2

User Guide - NVMS Mobile client 2016 R2
NVMS Mobile
client 2016 R2
User Guide
NVMS Mobile client 2016 R2 - User Guide
Contents
Copyright, trademarks and disclaimer........................ 4
Get started ................................................................. 5
About the server and client components of NVMS Mobile ...... 5
Installing NVMS Mobile and plugins....................................... 5
Install NVMS Mobile on a mobile device ................................ 6
Connect a mobile device to a NVMS Mobile server ................. 7
View and edit connections to NVMS Mobile servers ............... 8
Select a language for the app ................................................ 8
Maintain connection settings for a NVMS Mobile server......... 8
Turn on or turn off notifications ............................................ 9
About streaming video from your mobile device .................. 10
Set up video streaming on your mobile device .................... 11
Buttons and settings overview ............................................ 11
Observe and communicate ....................................... 14
Viewing live video ............................................................... 14
Filter your views .................................................................. 15
Using actions in NVMS Mobile .............................................. 16
View and trigger actions ...................................................... 16
Investigate and document ....................................... 18
Find and view video recordings ........................................... 18
View or create an investigation ........................................... 19
Contents
2
NVMS Mobile client 2016 R2 - User Guide
Stream video from your device to your surveillance system 19
Take a snapshot .................................................................. 20
Use picture-in-picture.......................................................... 21
React to a notification ......................................................... 21
Contents
3
NVMS Mobile client 2016 R2 - User Guide
Copyright, trademarks and disclaimer
Copyright
2016 Sony Corporation.
Trademarks
Microsoft and Windows are registered trademarks of Microsoft Corporation. App Store is a service
mark of Apple Inc. Android is a trademark of Google Inc.
All other trademarks mentioned in this document are trademarks of their respective owners.
Disclaimer
This text is intended for general information purposes only, and due care has been taken in its
preparation.
Any risk arising from the use of this information rests with the recipient, and nothing herein should
be construed as constituting any kind of warranty.
Sony Corporation reserve the right to make adjustments without prior notification.
All names of people and organizations used in the examples in this text are fictitious. Any
resemblance to any actual organization or person, living or dead, is purely coincidental and
unintended.
This product may make use of third party software for which specific terms and conditions may
apply. When that is the case, you can find more information in the file
3rd_party_software_terms_and_conditions.txt located in your surveillance system
installation folder.
Copyright, trademarks and disclaimer
4
NVMS Mobile client 2016 R2 - User Guide
Get started
This manual is for people who use NVMS Mobile on mobile devices running Android and iOS.
About the server and client components of
NVMS Mobile
NVMS Mobile is a free mobile app that gives you on-the-go access to viewing, playing back, and
investigating video from your Network Video Management System surveillence system.
NVMS Mobile has two parts:

NVMS Mobile client is an application for your smartphone or tablet. For more information,
see Install NVMS Mobile on a mobile device (on page 6)

NVMS Mobile server is the component that system administrators install and use to
maintain settings for the client. For more information, see Installing the NVMS Mobile
server and plugins (see "Installing NVMS Mobile and plugins" on page 5) or the NVMS
Mobile Administrator Guide. Download the guide from the Sony website
http://www.sony.net/CameraSystem/NVMS/Software.
Installing NVMS Mobile and plugins
The information in this topic is intended primarily for system administrators. For more information,
see the NVMS Mobile Administrator Guide. Download the guide from the Sony website
http://www.sony.net/CameraSystem/NVMS/Software.
You can install the NVMS Mobile server component when you install these versions, and all later
versions, of Network Video Management System video management software products:

Network Video Management System Enterprise Edition 2013

Network Video Management System Standard Edition 2013
To get the most out of NVMS Mobile, make sure you're using the latest version of your Network
Video Management System video management software. Information about the products is
available on the website www.sony.net/CameraSystem/Product-info.
You can also download NVMS Mobile server for free from the download page on the Sony
Corporation website http://www.sony.net/CameraSystem/NVMS/Software.
Operating systems
NVMS Mobile supports the following operating systems for mobile devices:
iOS 7 and later
iPhone, iPad and iPod Touch
Google Android 4.0 and later Smartphones and tablets with Android installed
Where to install the NVMS Mobile server component
Install the NVMS Mobile server component on the server that runs your Network Video
Management System surveillance system, or on a dedicated server.
Get started
5
NVMS Mobile client 2016 R2 - User Guide
If you use Network Video Management System Enterprise Edition, we recommend that you install
NVMS Mobile on a dedicated machine, and on all machines running Management Application or
Management Client.
You can install the server component of NVMS Mobile in various ways:
Network Video
Management System
product
Requirement
Installation on the same
machine as the Management
Application.
Installation on a dedicated
machine:
Network Video Management
System Standard Edition
products
Complete a Typical installation
of the Network Video
Management System Standard
Edition software. A Typical
installation includes the NVMS
Mobile server.
Run the separate NVMS Mobile
server installer.
Network Video Management
System Enterprise Edition
products
Run the separate NVMS Mobile server installer.
Installing the NVMS Mobile plugin component
You should install the plug-in on machines other than the one running the NVMS Mobile server.
On all machines that run the Management Application or Management Client:
1. Run the NVMS Mobile installer.
2. Choose a Custom installation and select the plug-in (32-bit or 64-bit). It it safe to install
both.
3. Restart the Management Application or Management Client.
Install NVMS Mobile on a mobile device
Download the free NVMS Mobile application from Google Play or App Store.
Finding the app in the stores is easy. Just search for "NVMS Mobile," and then install it. Afterward,
a Sony logo icon is available on your device. To start NVMS Mobile, tap the icon.
Note: By default, a Sony Demo server installs. Use the server to test the app. The server is just for
testing, so there are some things you can't do. For example, you can't use pan-tilt-zoom controls.
You can't delete or edit the demo server, but you can hide it. To hide the server, go to Settings,
tap General or Miscellaneous, and then turn off the Hide demo server setting.
To view videos from your cameras, connect the app to one or more fNVMS Mobile servers. For
more information, see Connect a mobile device to a NVMS Mobile server.
Get started
6
NVMS Mobile client 2016 R2 - User Guide
Connect a mobile device to a NVMS Mobile
server
You can connect devices that are running Apple iOS and Google Android.
Connect manually
1. Tap + to scan the local network for NVMS Mobile servers, and then tap Add server
manually.
2. Enter a name for the server, its IP address, and log in credentials, and then tap Save. The
name displays in the list of servers on your device, and can be anything you want.
3. Optional: You can also do the following:

By default, the connection uses HTTP. To use HTTPS, select the Secure
connection check box.
Note: If your device is running iOS 9.0 or later, ask your system administrator whether
a digital certificate from a certificate authority is installed on your NVMS Mobile server,
before you turn on secure connections. Without a certificate, devices running these
operating systems cannot connect to NVMS Mobile servers if you turn on the secure
connection setting.

To always connect to this NVMS Mobile server when you start NVMS Mobile, select
the Default server check box.

To be notified when alarms trigger or there is a problem with a device, select the
Receive notifications check box. For more information, see Turn on or turn off
notifications.
Connect to a server you have used before
1. Tap + to scan the local network for NVMS Mobile servers.
2. The Existing Servers group shows servers that you have connected to before. Tap one or
more servers, and then tap Save.
3. Enter your log in credentials for the NVMS Mobile server, and then tap Connect.
Tip: To avoid having to enter your credentials the next time you connect, select the Save
credentials check box.
Connect from an email message
Notes: This connection method uses the Address book service, and requires a license.
Your system administrator can send you an email message that contains a unique identifier for the
server. Use the identifier to connect your mobile device to a NVMS Mobile server.
1. On your mobile device, find the email message from your system administrator.
2. If NVMS Mobile is not installed, tap Download NVMS Mobile Mobile to go to the store
where you can download it.
3. When NVMS Mobile is installed on the device, tap Add your server to NVMS Mobile.
Get started
7
NVMS Mobile client 2016 R2 - User Guide
4. Tap the NVMS Mobile server to connect to it.
5. Enter your log in credentials for the NVMS Mobile server, and then tap Connect.
View and edit connections to NVMS Mobile
servers
1. On the Servers page, tap and hold the name of the server, then tap Edit.
2. View or edit the following settings:

Secure connection - Use HTTPS when you connect. By default, the connection
uses HTTP.
Note: If your device is running iOS 9.0 or later, ask your system administrator whether
a digital certificate from a certificate authority is installed on your NVMS Mobile server,
before you turn on secure connections. Without a certificate, devices running these
operating systems cannot connect to NVMS Mobile servers if you turn on the secure
connection setting.

User name and Password - The log in credentials

Save credentials - Remember the log in credentials

Default server - Always connect to this NVMS Mobile server when you start NVMS
Mobile
3. To add addresses manually, tap Add address, and then enter the IP address and port
number.
Select a language for the app
By default, the NVMS Mobile client uses the language of your device. For example, if your device
uses French, NVMS Mobile displays in French.
To use another language, change one of the following:

The language setting in NVMS Mobile (available only for Android)

The language of your device. Restart NVMS Mobile to apply the change
Note: To use NVMS Mobile in Hindi, your device must support that language.
Maintain connection settings for a NVMS
Mobile server
You can maintain information about the NVMS Mobile server, and about the way you connect to it
on your mobile device.
To go to these settings:

iOS and Android - Tap Edit, and then tap the server
Get started
8
NVMS Mobile client 2016 R2 - User Guide
Setting
Description
Server name
The name of the server.
Address
The IP address of the computer where the server is running.
Alternatively, if you don't know the IP address you can insert the
full name of the computer.
The port number that NVMS Mobile uses to communicate with the
server. The default port number is 8081.
Port
If you edit the port number, you must also edit the corresponding
port number in your system setup. Otherwise, NVMS Mobile app
and server cannot communicate.
Description (optional)
A description of the server.
Indicate whether the server you connect to uses an HTTPS
connection.
Secure connection
Note: If your device is running iOS 9.0 or later, ask your system
administrator whether a digital certificate from a certificate
authority is installed on your NVMS Mobile server, before you turn
on secure connections. Without a certificate, devices running
these operating systems cannot connect to NVMS Mobile Mobile
servers if you turn on the secure connection setting.
User name
Your user name.
Password
Your password. The user name and password can be based on
either Network Video Management System basic users, which are
set up in Management Application or Management Client, or
domain users.
Save credentials
Indicate whether you want NVMS Mobile to remember your user
name and password for the next time you open the app.
Default server
Indicate whether to log in to this server when you open NVMS
Mobile.
Delete
For iOS, delete the server.
For Android, Delete is in the server context menu.
Turn on or turn off notifications
If you have configured alarms and events in your surveillance system, NVMS Mobile can send a
notification to you when an alarm triggers or something goes wrong with a device or server. If you
have the app open, NVMS Mobile displays the notification in the app.
Turn on or turn off notifications
By default, notifications are turned on when you add a server. These notifications are delivered
when you have NVMS Mobile open.
Get started
9
NVMS Mobile client 2016 R2 - User Guide
1. Open NVMS Mobile, and then do the following:

Android - Tap the server, and tap Edit, and then turn on or turn off the Receive
notifications setting.

iOS - Go to the Settings page for your mobile device. Tap NVMS Mobile, then
Notifications. Turn on or turn off the Allow Notifications setting.
2. To specify the alarms you are notified about, tap Notifications settings, and then select:

All alarms - Be notified when any alarm is triggered, regardless of the alarm's owner or
source

My alarms - Be notified when an alarm that you own is triggered, or when someone
assigns an alarm to you.
About streaming video from your mobile
device
Video push lets you stream live video from the camera on your mobile device to your Network
Video Management System surveillance system.
For example, this is a great way to collect evidence when you investigate an incident.
When would I want to stream video from my mobile device?
There are many good reasons to stream video to your surveillance system. The following are just a
few examples:

A crowd is forming at an entrance, and you want to show the control room.

You witnessed an act, and want footage of the perpetrator.

You're interviewing a witness, and want to record the response.

A guard is handling a situation, and you want to document his actions.
Your administrator must set up Video push
To use Video push, your administrator must do the following in Management Application or
Management Client:

Add a channel to the NVMS Mobile server.

Add the Video Push Driver as a hardware device.

Specify the users who can stream video from a device.
For more information, see the Network Video Management System Administrator Manual for your
system.
Get started
10
NVMS Mobile client 2016 R2 - User Guide
Set up video streaming on your mobile device
To stream video from your mobile device to your Network Video Management System surveillance
system, there are a few things you need to set up.
The settings depend on the operating system on your device.
Settings for Android
Settings for video push are the same for Android. How you access them differs slightly.
Go to the Settings in NVMS Mobile, and then do one of the following:

Android - Tap Camera
Specify the following:

Use front facing camera - Use your device's front facing camera to stream the video.
This displays only if the front facing camera is currently in use on your device

Video resolution - Set the resolution of the stream to push

Image quality - Set the image quality of the video stream. Enter a value between 0 and
99

Quality of service - Let NVMS Mobile server optimize the number of frames per second in
the stream. For example, you may need more frames if your connection is slow. This can
affect the quality of the video

Location data (Network Video Management System Enterprise Edition products only) Include details about where you are while you stream the video. This requires that you turn
on location information on your device
Settings for iOS
Settings for video push are available in Settings on your mobile device.

Camera - Use either the front-facing or back-facing camera on your device

Resolution - Choose image resolution. You can choose between HD, Low, Medium and
High

Image Quality - Select whether to allow NVMS Mobile to adjust image quality. By default,
this is turned on

Location data (Network Video Management System Enterprise Edition products only) Include details about where you are while you stream the video
Buttons and settings overview
This topic lists and describes buttons and settings in NVMS Mobile. If you see something in the app
that you're not sure how to use, you can look it up here.
After you log in to a server, the top menu (Android) and the bottom tabs (iOS) can contain the
following options:
Get started
11
NVMS Mobile client 2016 R2 - User Guide
Name
Description
Views
Displays and previews of available views. Also lets you select the
one to view video from (live or recorded).
Actions
Activate actions.
Investigations
View or create video or a snapshot.
Video push
Open the Video Push functionality, allowing you to use your
device camera to send video to your system.
Alarms
View and react to alarms.
Additional features are available, depending on what you're doing.
Name
Description
Actions
View all actions for a view or a camera.
Activate
Activate an output or an event.
Add server (iOS)
Add and configure a new server.
Cancel
Cancel the last thing you did.
Done
Done on this page.
Edit
Edit settings for the server.
Exit full screen
Stop viewing video in full screen.
Filter
Filter views. By default, all views are selected. You can hide or
show views.
Go to time (in Playback
mode)
Go to a specific time in the past.
Help
Find information about using NVMS Mobile.
Home (Android)
Go to the Servers list.
Live (in Playback mode)
Switch from Playback mode to Live mode.
New (Android)
Add and configure a new server.
Hide/Show live PiP (in
Playback mode)
Turn on and off a small picture-in-picture (PiP) of Live mode. Tap
the Hide/Show live PiP button or double-tap the PiP to return to
Live mode.
OK
Acknowledge or perform an action.
Outputs
Access outputs to activate them.
Playback (in Live mode)
Switch from Live mode to Playback mode.
Playback speed (in Playback
Control the speed of the video.
mode)
Presets (on the selected
camera) (only for PTZ
cameras)
Get started
View the pre-set camera positions.
12
NVMS Mobile client 2016 R2 - User Guide
Name
PTZ / PTZ presets (on the
selected camera)
(dimmed for non-PTZ
cameras)
Description
Show PTZ controls on the screen so you can pan, tilt and zoom
in.
Recent history
View a list of recordings.
Save
Save your filtered views.
Settings
Go to All Settings to view or change Image, Auto-hide
Controls, Video Push, and About settings.
Share (iOS)
Take a snapshot of the current frame and save it to your device.
Take a snapshot of the current frame. Snapshots save as follows:
Snapshot
Android: By default, snapshots are saved to your device's SD
card at: /mnt/sdcard/Sony.
iOS: Snapshots are saved to your device's Photo Library and can
be accessed from tapping Photos on your device.
You cannot change save locations.
Time picker
Get started
Go to a specific time in the video.
13
NVMS Mobile client 2016 R2 - User Guide
Observe and communicate
Viewing live video
Cameras are available in the views you set up in Network Video Management System Smart Client.
You cannot create views in NVMS Mobile. Additionally, NVMS Mobile displays only video. If a view in
Network Video Management System Smart Client contains other types of content, such as maps,
text, or HTML pages, the content does not display.
When you connect to a server, NVMS Mobile lists your views.

Android - Access your views on the Views page

iOS - Access your views on the NVMS Mobile page
The list of views offers the following information:

The type of view. This can be All Cameras, Shared views that everyone can access, or
Private views that only you can access.

The name of the view. For example, Building A

The number of cameras available in the view
Start viewing live video from a camera
1. Tap a view to display the cameras it contains.
2. Tap the preview image for the camera.
Stop viewing live video from a camera, or view another camera
To stop viewing live video:

iOS - Tap Close in the upper left corner

Android - Tap the NVMS Mobile icon in the upper left corner
To view video from another camera in the view:

Swipe right or left
Search for a specific camera
If you have lots of views and cameras, you can find a camera by searching for the camera name.
1. Above the list of views, tap Search all cameras.
2. Enter the name of the camera.
Observe and communicate
14
NVMS Mobile client 2016 R2 - User Guide
Filter your views
If you only want to see a particular type of view, or just want to see fewer views, you can apply a
filter. All views are displayed when you tap Filter, regardless of whether they are shown or filtered.
You can always start showing a view again.
How you filter views depends on the operating system on your device.
1. To filter views:

Tap Filter in the upper right corner
1. To turn on or turn off a view, tap the view or use the slider.
2. To apply the filter and return to the list of views:

iOS - Tap Done in the upper right corner of the navigation pane

Android - Tap Save in the upper right corner
Discard your selections
If you haven't saved your selections yet, you can discard them:

Android - Tap Cancel

iOS - Manually undo your selections, or tap Servers to go to the list of servers
When you view a camera in full screen, you can interact with video in several ways.
Use pan-tilt-zoom controls and presets
If you're viewing video from a pan-tilt-zoom (PTZ) camera, tap PTZ to use the PTZ controls. Tap
controls once to pan or zoom one step.
If the PTZ controls use auto-hide, controls hide if you don't use them. To show them, tap the
screen. This feature is not available for cameras on the Sony Demo server.
If your administrator created presets for the PTZ camera in Management Application or
Management Client, you can use presets on your device in PTZ mode.
How you access presets depends on the operating system on your device.

Android - Tap Presets

iOS - Tap PTZ
On the Presets context menu or page, select a preset to start using it.
Zoom in or out
You can zoom in or out to get a better look at the video.

To zoom in, pinch out or tap +

To zoom out, pinch in or tap -
NVMS Mobile uses digital zoom.
Observe and communicate
15
NVMS Mobile client 2016 R2 - User Guide
Crop or fit images to the screen
You can resize images to fit your screen, or crop them. By default, images are fitted to the screen.
The outer parts of images are removed. Tap twice to crop images to fill screen and preserve the
image's aspect ratio.
Display other cameras in the view
If your view contains other cameras, you can swipe right or left to display their video.
Switch to Playback mode
If you're recording, and something happens that you want to review, you can switch to Playback
mode to review the footage, or start an investigation.
Tip – To keep an eye on the live video while you investigate, turn on picture-in-picture by tapping
Hide/show Live PiP.

To switch to Playback mode, tap Playback.
Using actions in NVMS Mobile
If your system administrator has given you permission, you can trigger actions if you need to. In
the clients, actions are outputs and events that you can activate. For example, you can:

Starting or stop recording

Switch to a different frame rate

Trigger SMS and email notifications

Move PTZ cameras to preset positions

Activate hardware output
View and trigger actions
You can view and trigger actions from the following locations:

The list of views

When viewing live video

The list of investigations

The Actions page
View actions
1. To view actions, do one of the following:

Android - In the drop-down menu at the top, tap Actions
Observe and communicate
16
NVMS Mobile client 2016 R2 - User Guide

iOS - Tap
Actions
Trigger an action
1. To trigger an action, do one of the following:

In the list of actions, tap the action, and then confirm that you want to trigger it.
Observe and communicate
17
NVMS Mobile client 2016 R2 - User Guide
Investigate and document
Find and view video recordings
Access recorded video from a camera in Playback mode.
View video recordings for a camera
How you access recordings depends on the operating system on your device.
1. In the view that contains the camera, tap the preview image for the camera.
2. Tap Playback.
3. To view a list of recordings for the camera

Android - Tap the drop-down menu in the upper right of the screen, then tap Recent
history

iOS - In the upper navigation bar, tap Menu, then tap Recent history
Playing back recorded video
Use the timeline controls to play back recorded video. Controls show or hide, depending on what
you're doing.

Go to time - Go to a specific point-in-time by using the slider

Playback speed - Speed up or slow down the playback speed

Play the video forwards and backwards, and pause it

Go to the first frame in the previous or next video

Hide/Show live PiP - Display live video from the camera in a picture-in-picture window.
For more information, see Use picture-in-picture (on page 21).
Load more recordings
In the Recent history or History lists, if you don't find the sequence you want, and more recordings
are available, you can load more and keep investigating.

Tap Load more
Investigate and document
18
NVMS Mobile client 2016 R2 - User Guide
View or create an investigation
If you are using investigations in Web Client, you can use NVMS Mobile to view, create, and delete
video and investigations. You can preview video from investigations, but you cannot download it to
your mobile device.
View ongoing and completed investigations
How you access investigations depends on the operating system on your mobile device.
1. To go to investigations, do one of the following:

Android - Tap the drop-down menu in the upper left, and then tap Investigations

iOS - On the Navigation pane, tap
Investigation.
1. Optional: On the Investigations page, you can filter investigations:

My investigations - View your investigations

All investigations - View your investigations and those that other people created. Your
administrator must enable you to do this
1. To see the details in an investigation, tap the investigation.
2. To view the video in the investigation, tap See camera.
Create an investigation
When you create an investigation the video is saved on the NVMS Mobile server that you are
connected to, not on your mobile device. To view the video on your device, you must connect to
the server.
1. Find the camera that recorded the video, and then tap the preview image to maximize it.
2. Tap
Playback, and then:

Android - Tap
Investigate.

iOS - Tap Menu, and then tap
Investigate.
3. Specify from time and to time to define the period to investigate.
4. Tap Create.
Stream video from your device to your
surveillance system
If your system administrator has set up video push in Management Application or Management
Client, and enabled you to use it, you can stream video from your device to your surveillance
system. For more information, see About streaming video from your mobile device (on page 10).
How you access and use video push depends on the operating system on your device:
Investigate and document
19
NVMS Mobile client 2016 R2 - User Guide
1. To access video push, do one of the following:

iOS - On the navigation bar, tap
Video Push

Android - From the top drop-down menu, tap Video Push
2. To start streaming video, do one of the following:

Android - Tap Record

iOS - Tap Push
3. To stop recording, do one of the following:

Android - Tap Stop Recording
Investigate the video you streamed
NVMS Mobile records the video that you stream so that you can investigate it.
1. Go to the view where you added the Video Push Driver camera.
2. Tap the camera to go to full screen.
3. Tap
Playback.
4. Use the playback controls to investigate the video.
Take a snapshot
When you view live video or play it back, when you find something that's of particular interest, you
can take a shapshot of it.
Snapshots are saved on your mobile device.

Android - View snapshots on your device's SD card at /mnt/sdcard/Sony.

iOS - View snapshots in the Photo Library.
Note that you can't change the locations.
To take a snapshot, do this:

In Live mode or Playback mode, tap
Investigate and document
Snapshot.
20
NVMS Mobile client 2016 R2 - User Guide
Use picture-in-picture
If you see something that you want to investigate, but don't want to stop observing the current
situation, you can display the live video in a picture-in-picture (PiP) while you play back the video.
To turn on PiP, follow these steps:
1. While viewing live video from the camera, tap
Playback.
2. Depending on the operating system on your device, do one of the following:

iOS - Tap Menu, and then tap Hide/Show Live PiP.

Android - Tap the drop-down menu in the upper right corner, and then tap Hide/Show
Live PiP.
Return to live video
To view the live video in full screen, tap the PiP window.
React to a notification
NVMS Mobile can notify you when something needs your attention, even when you're not using the
app. For example, the system can notify you when an alarm triggers.
React now, or later
To react immediately, tap the notification to open NVMS Mobile and investigate what happened.
When you do this, NVMS Mobile does not store the notification.
If you don't want to react right away, you can view the notification later:

iOS - Go to the lock screen or the Notification Center

Android - Go to the Notification Area. Open the notification drawer to see the details
In Investigation mode, you can export evidence from one camera, or several cameras at the same
time. The system queues the exports and creates them one at a time.
1. Tap the camera to export from. The camera displays in a view.
2. Go to Playback, and then do one of the following:

iOS - Tap Menu, and then Export
1. Select the start and end time for your export, tap the start or end frame. The frame is
indicated with a thumbnail image from the selected time.
Investigate and document
21
NVMS Mobile client 2016 R2 - User Guide
Tip: You can select the hour, minute, and second as well as date, month and year. If the
start and end date and time are the same, you will export a snapshot.
2. To start the export, tap Export.
When the export completes, there are still some things you can do:

To save snapshots to your device's photo library (iOS only), tap Share.

To view a list of your exports, tap Go to exports to open My Exports

To view a list of everyone's exports, tap All Exports. Your administrator must allow you to
do this.
Investigate and document
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement