- No category
advertisement
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
1/24
SPECIFICATIONS
OF
Slim DVD Super Multi Drive
Model GT80N
(Standard)
Planned by: C. J. Kim ________________
Checked by: J. W. Seo ________________
Authorized by: S. M. KIM ________________
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
Revision History
No. Date Brief description
1 2012.01.18 Tentative version
T.00
2/24
Note
T.00
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
3/24
Table of Contents
1. Features ---------------------------------------------------------------------------------------- 5
2. General Description ------------------------------------------------------------------------- 7
2-1. Applicable disc formats ------------------------------------------------------------- 7
2-2. Writing method ------------------------------------------------------------------------- 7
2-3. Disc Diameter -------------------------------------------------------------------------- 7
2-4. Data Capacity -------------------------------------------------------------------------- 7
3. Drive Performance -------------------------------------------------------------------------- 8
3-1. Host Interface ------------------------------------------------------------------------ 8
3-2. Write Speed ---------------------------------------------------------------------------- 8
3-3. Read Speed -------------------------------------------------------------------------- 9
3-4. Data Transfer Rate ------------------------------------------------------------------- 10
3-5. Access Time --------------------------------------------------------------------------- 10
3-6. Data Error Rate ------------------------------------------------------------------------ 10
3-7. Spin up, Load time ------------------------------------------------------------------- 10
3-8. Buffer Memory Size ------------------------------------------------------------------ 10
4. Environmental Conditions ----------------------------------------------------------------- 11
4-1. Ambient Temperature ---------------------------------------------------------------- 11
4-2. Approval Temperature Rise --------------------------------------------------------- 11
4-3. Temperature Gradient ---------------------------------------------------------------- 11
4-4. Relative Humidity ---------------------------------------------------------------------- 11
4-5. Dew Point Temperature Restrictions --------------------------------------------- 11
4-6. Altitude ------------------------------------------------------------------------------------ 11
4-7. Vibration --------------------------------------------------------------------------------- 11
4-8. Shock ----------------------------------------------------------------------------------- 11
4-9. Drop Impact --------------------------------------------------------------------------- 11
5. Quality and Reliability ---------------------------------------------------------------------- 12
5-1. MTBF ------------------------------------------------------------------------------------ 12
5-2. Tray Cycle Test ----------------------------------------------------------------------- 12
5-3. Actuator Mechanism -------------------------------------------------------------- 12
5-4. MTTR ( Mean Time To Repair ) -------------------------------------------------- 12
5-5. Component Life ---------------------------------------------------------------------- 12
6. Electro Static Discharge Susceptibility ( ESD ) ----------------------------------- 12
7. Power Requirement ----------------------------------------------------------------------- 12
7-1. Source Voltage ---------------------------------------------------------------------- 12
7-2. Current --------------------------------------------------------------------------------- 12
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
4/24
Table of Contents
8. Acoustic Noise ------------------------------------------------------------------------------- 13
9. Dimensions ------------------------------------------------------------------------------- 13
10. Mass -------------------------------------------------------------------------------------------- 13
11. Mechanicals ------------------------------------------------------------------------------------ 13
11-1. Disc Loading ---------------------------------------------------------------------------- 13
11-2. Mounting Requirements ------------------------------------------------------------- 13
11-3. Installation conditions ---------------------------------------------------------------- 14
12. Control and functions ------------------------------------------------------------------------- 15
12-1. Front View ----------------------------------------------------------------------------- 15
12-2. Rear View ---------------------------------------------------------------------------- 15
12-3. Connector Pin Assignment --------------------------------------------------------- 15
13. Mechanical Dimensions -------------------------------------------------------------------- 16
14. Packaging ------------------------------------------------------------------------------------- 17
15. Supported Command List ------------------------------------------------------------------ 18
15-1. ATA -------------------------------------------------------------------------------------- 18
15-2. ATAPI ---------------------------------------------------------------------------------- 19
16. Regulations and Standards --------------------------------------------------------------- 20
16-1. Safety ----------------------------------------------------------------------------------- 20
16-2. EMC/EMI ------------------------------------------------------------------------------- 20
16-3. Laser Safety ---------------------------------------------------------------------------- 20
17. Supporting Operating System & Writing Tool ---------------------------------------- 20
17-1. Operating Systems ------------------------------------------------------------------ 20
17-2. Writing Tool ---------------------------------------------------------------------------- 20
18. Caution ---------------------------------------------------------------------------------------- 21
Appendix 1. Bezel and Tray, LED, Region ------------------------------------------------ 22
Appendix 2. Rating Label specification (Product of Malaysia) ------------------------- 24
Appendix 3. Box label Specification (Product of Malaysia) ---------------------------- 25
Appendix 4. Block Diagram ------------------------------------------------------------------- 26
Appendix 5. Key Components List ---------------------------------------------------------- 27
Appendix 6. Inquiry Data ------------------------------------------------------------------------ 28
Appendix 7. SATA Power Management Transition State ------------------------------- 29
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
5/24
1. Features
1.1 General
(1) 12.7mm Height Internal Slim Super Multi Drive
(2) CD-R/RW, DVD-R/RW/RAM/ +R/+RW +/-R DL read and write compatible,
CD Family and DVD-ROM read compatible
(3) Enhanced IDE (ATAPI) interface : SATA Interface
(4) Buffer memory 0.75 MB
(5) Buffer Under-run prevention function embedded
(6) Running OPC (Optimize Power Control) circuit
(7) Drawer Type manual Load / Electrical Release
(8) Supports Power saving mode and Sleep mode
(9) Vertical and Horizontal installable
(10) Supports Zero Power Function
1.2 Supported disc formats
(1) Reads data in each DVD-ROM, DVD-R (Ver.1.0, Ver. 2.0 for Authoring)
(2) Reads and writes in each DVD-R (Ver. 2.1 for General), DVD-R DL (Dual Layer), DVD-RW,
DVD-RAM (Ver.2.2), DVD+R, DVD+R DL (Double Layer), and +RW
(3) Reads data in each CD-ROM, CD-ROM XA, CD-I, Video CD, CD-Extra and CD-Text
(4) Reads data in Photo CD (Single and Multi session )
(5) Reads standard CD-DA
(6) Support to read Super Audio CD (Compatible layer in Hybrid type)
(7) Reads and writes CD-
R discs conforming to “Orange Book Part 2”
(8) Reads and writes CD-
RW discs conforming to “Orange Book Part 3”
(9) CPRM (DVD-R/RW/RAM) supported
1.3 Supported write method
(1) DVD-R: Disc at Once and Incremental Recording
(2) DVD-R DL: Disc at Once , Incremental Recording and Format 4
(3) DVD-RW: Disc at Once, Incremental Recording and Restricted Overwrite
(4) DVD-RAM: Random Write
(5) DVD+R: Sequential Recording
(6) DVD+R DL Sequential Recording
(7) DVD+RW: Random Write
(8) CD-R/RW: Disc at Once, Session at Once, Track at Once and Packet Write
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
1.4 Performance
(1) Average access time: DVD-ROM 160 ms
(1/3 stroke) CD-ROM 140 ms
(2) Write speed: DVD-R 4x PCAV, 8x CAV
DVD-R DL 2x CLV, 4x PCAV, 6x PCAV
DVD-RW 2x CLV, 4x, 6x ZCLV
DVD-RAM 2x, 3x CLV, 5x PCAV(Ver.2.2)
(12x Media: Not support)
DVD+R 4x PCAV, 8x CAV
DVD+R DL 2.4x CLV, 4x PCAV, 6x PCAV
DVD+RW 2.4x, 3.3x CLV, 4x ZCLV, 6x ZCLV, 8x ZCLV
(8x Speed disc: 3.3x CLV, 6x, 8x ZCLV)
CD-R 10x CLV, 16x ZCLV, 24x CAV
CD-RW 4x, 10x CLV, 16x ZCLV, 24x ZCLV
(High Speed: 10x CLV, Ultra Speed: 24x ZCLV)
(3) Read speed: DVD-R/RW/ROM 8x/8x/8x max.
DVD-R DL 8x max.
DVD-RAM (Ver.2.2) 5x max
DVD-Video (CSS Compliant Disc) 4x max. (Single/Dual layer)
DVD+R/+RW 8x/8x max.
DVD+R DL 8x max.
CD-R/RW/ROM 24x/24x/24x max.
CD-DA (DAE) 24x max.
(4) Sustained Transfer rate: DVD-ROM 11.08 Mbytes/s (8x) max.
CD-ROM 3,600 kB/s (24x) max.
(5) Legacy data Transfer mode : ATA PIO Mode 0-4
ATA Multi Word DMA Modes 0-2
ATA Ultra DMA Mode 0-6
(6) Support CD-Text read/write
1.5 Audio
(1) 16 bit digital data output through ATA interface
(2) Software Volume Control
6/24
*Definition
Transfer Rate: 1x (DVD) = 1.385 Mbytes/s, Mbytes/s = 10
6
bytes/s,
1x (CD) = 150 kB/s kB/s = 2
10
bytes/s
Capacity: MB = 2
20
bytes, kB = 2
10
bytes
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
2. General description
2.1 Applicable disc formats
<DVD> DVD-ROM: 4.7GB (Single Layer)
8.5GB (Dual Layer)
DVD-R: 3.95GB (Ver. 1.0: read only)
4.7GB (Ver. 2.0 for Authoring: read only)
(DL)
DVD-RW:
DVD-RAM:
4.7GB (Ver. 2.1 for General: read & write)
8.5GB (Ver. 3.0)
4.7GB (Ver. 1.2/ Rev 1.0, 2.0, 3.0)
2.6GB/side (Ver.1.0) -> Not Support
4.7GB/side (Ver. 2.2)
DVD+R: 4.7GB (Ver. 1.3)
(DL) 8.5GB (Ver. 1.1)
DVD+RW: 4.7GB (Vol.1 Ver.1.3)
<CD>
DVD-RW DL : Not support
CD-ROM Mode-1 data disc
2.2 Writing method
(1) DVD-R/RW
(2) DVD-R DL
(3) DVD-RAM/+RW
(4) DVD+R
(5) DVD+R DL
CD-ROM Mode-2 data disc
CD-ROM XA, CD-I, Photo-CD Multi-Session, Video CD
CD-Audio Disc
Mixed mode CD-ROM disc (data and audio)
CD-Extra
CD-Text
CD-
R (Conforming to “Orange Book Part 2”: read & write)
CD-
RW (Conforming to “Orange Book Part 3”: read & write)
Disc at Once (DAO)
Incremental Recording
Restricted Overwrite (DVD-RW only)
Disc at Once (DAO)
Incremental Recording
Layer Jump Recording
Random Write
Sequential Recording
Sequential Recording
(6) CD-R/RW Disc at Once (DAO)
Session at Once (SAO)
Track at Once (TAO)
Packet Writing
2.3 Disc diameter
120 mm
80 mm
2.4 Data capacity
User data / Block DVD-ROM/R/RW/RAM /+R/+RW
2,048 bytes/block
CD (Yellow Book)
2,048 bytes/block (Mode1 & Mode2 Form1)
2,336 bytes/block (Mode2)
2,328 bytes/block (Mode2 Form2)
2,352 bytes/block (CD-DA)
7/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
8/24
3. Drive performance
3.1 Host interface
T13 ATA/ATAPI-7
MMC-6, SFF-8090i v7
Serial ATA Revision 3.0 (RSG: complied UTD 1.4 Gen1)
3.2 Write Speed
Media (Media Speed)
Writing Speed
DVD-R (1-2x) 2x CLV
Transfer rate (
DVD: Mbytes/s, CD: kB/s
)
2.77 Mbytes/s
-R (1-4x) 3.3x-4x PCAV
-R (1-8x) 3.3x-4x PCAV, 3.3-8x CAV
-R (1-16x) 3.3x-4x PCAV, 3.3-8x CAV
-R (8cm) 2x CLV
4.58-5.54
4.58-5.54, 4.58-11.08
4.58-5.54, 4.58-11.08
2.77
DVD-R DL (4x) 2x CLV, 3.3x-4x PCAV 2.77, 4.58+5.54
DVD-R DL (8x) 2x CLV, 3.3x-4x PCAV, 3.3-6x PCAV 2.77, 4.58+5.54, 4.58-8.31
DVD-RW (1x) 1x CLV
-RW (1-2x) 2x CLV
1.385
2.77
-RW (2-4x)
-RW (2-6x)
-RW (8cm)
DVD-RAM (2x)
-RAM (2-3x)
-RAM (2-5x)
2x CLV, 2+4x ZCLV
2x CLV, 2+4x, 2+4+6x ZCLV
2x CLV
2x CLV
3x CLV
3-5x PCAV
-RAM (over 12x) Not supported
-RAM (8cm) 2x CLV
2.77, 2.77+5.54
2.77, 2.77+5.54, 2.77+5.54+8.31
2.77
2.77 (w/o Verify)
4.16 (w/o Verify)
4.16-6.93 (w/o Verify)
DVD+R (2.4x)
+R (2.4-4x)
+R (2.4-8x)
DVD+R DL(8x)
2.4x CLV
3.3x-4x PCAV
3.3x-4x PCAV, 3.3-8x CAV
+R (2.4-16x) 3.3x-4x PCAV, 3.3-8x CAV
DVD+R DL (2.4x) 2.4x CLV
2.4x CLV, 3.3x-4x PCAV
3.3-6x PCAV
DVD+RW (2.4x) 2.4x CLV
2.77 (w/o Verify)
3.32
4.58+5.54
4.58+5.54, 4.58-11.08
4.58+5.54, 4.58-11.08
3.32
3.32, 4.58+5.54
4.58-8.31
+RW (2.4-4x) 2.4x CLV, 2.4+4x ZCLV
+RW (3.3-8x)
CD-RW (MS)
-RW(HS)
-RW (US)
3.3x CLV, 3.3+6+8x ZCLV
CD-R 10x CLV, 10+16x ZCLV
24x CAV
4x CLV
10x CLV
10 CLV, 10+16x ZCLV
10+16+24x ZCLV
3.32
3.32, 3.32+5.54
4.58, 4.58+8.31+11.08
1,500, 1,500+2,400
3,600
600
1,500
1,500, 1,500+2,400
1,500+2,400+3,600
* Rotational speed (CLV, ZCLV)
DVD-R/RW/ROM,+R/RW 1x: Approx. 1,390 (Inside) - 580 r/min (Outside)
DVD-RAM Ver.2.2
CD-R/RW/ROM
2x: Approx. 3,250 (Inside) - 1,380 r/min (Outside)
1x: Approx. 500 (Inside) - 210 r/min (Outside)
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
3.3 Read Speed
Media (Media Speed) Read Speed Transfer rate Rotational speed
(DVD: Mbytes/s, CD: kB/s) (Approx. r/min)
DVD-ROM (Single Layer) 3.3 - 8x CAV
(Dual Layer) 3.3 - 8x CAV
DVD-Video
*1
1.7 - 4x CAV
DVD-R (3.95GB/Data)
(3.95GB/Video Format)
3.3 - 8x CAV
1.7 - 4x CAV
4.58 - 11.08 Mbytes/s 4,710 r/min
4.58 - 11.08
2.29 - 5.54
4.58 - 11.08
(4.7GB/Data) 3.3 - 8x CAV
(4.7GB/VF) 1.7 - 4x CAV
DVD-R DL 3.3 - 8x CAV
DVD-RW (Data) 3.3 - 8x CAV
2.29 - 5.54
4.58 - 11.08
2.29 - 5.54
5.58 - 11.08
(VF)
DVD+R DL
DVD+RW
1.7 - 4x CAV
(Video & Data) 1.7 - 4x CAV
DVD-RAM *
2
(Ver. 2.2) 3 - 5x PCAV
DVD+R 3.3 - 8x CAV
3.3 - 8x CAV
3.3 - 8x CAV
4.58 - 11.08
2.29 - 5.54
2.29 - 5.54
4.16 - 6.93
4.58 - 11.08
4.58 - 11.08
4.58 - 11.08
CD-ROM/PhotoCD 10 - 24x CAV
CD-R/RW
CD-DA (Audio Play)
10 - 24x CAV
CD-DA(DAE) 10 - 24x CAV
4.3 -10x CAV
1,500 - 3,600 kB/s
1,500 - 3,600
1,500 - 3,600
650 - 1,500
CD-I/VideoCD 4.3 -10x CAV 650 - 1,500
*1) DVD-Video: CSS, No CSS, Single Layer, Dual Layer are same as above.
*2) DVD-RAM: Data, Video Format are same as above.
5,180
2,600
5,180
2,600
4,710
2,600
5,180
4,710
2,600
2,600
4,880 - 3,450
4,710
5,180
4,710
4,860 - 5,200 r/min
4,860 - 5,200
4,860 - 5,200
2,020 - 2,360
2,020 - 2,360
9/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
3.4 Burst transfer rate
SATA Gen.1
3.5 Access time (1/3 stroke)
1.5 G bps (150MB/s)
DVD-ROM
CD-ROM
DVD-RAM (Ver.2.2)
160 ms typ.*
260 ms typ.
140 ms typ.
(Note 1)
(Note 1)
Note :
1) Average access time is the typical value of more than 50 times
including latency and error correction time.
Test Disc: DVD: ALMEDIO TDR-820A
position.
CD: HITACHI HCD-1
*) Typical value defines a measured value in normal temperature (20 ºC) and horizontal
3.6 Data error rate
(Measured with 5 retries maximum)
DVD-R/RW/ROM/RAM
DVD+R/+RW
<10
-12
<10
-12
CD-R/RW/ROM <10
-12
(Mode-1)
<10
-9
(Mode-2)
Condition: It is assumed that the worst case raw error rate of the disc is 10
-3
3.7 Spin up time
without Multi-session
DVD-ROM (SL)
CD-ROM
11 s typ. (Time to drive ready mode from power on)
4 s typ. (Time to drive ready mode from sleep)
11 s typ. (Time to drive ready mode from power on)
4 s typ. (Time to drive ready mode from sleep)
3.8 Data buffer capacity
0.75 MB
10/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
11/24
4. Environmental Conditions
4.1 Ambient Temperature
Operating Read
Write
5 to 50 ºC
5 to 45 ºC
Storage/Transportation -30 to 60 ºC
4.2 Approval Temperature Rise
Center of Top Cover 56 ºC max.
4.3 Temperature Gradient
4.4 Relative Humidity
10 ºC
Operating Read
Write
15% to 85% (Non-Condensing)
15% to 80% (Depend on the Temperature)
Storage/Transportation 10% to 90% (Non-Condensing)
4.5 Dew point temperature restrictions
Less than 29 ºC
4.6 Altitude
Operating
Non-operating
0 to 3,000 m
0 to 12,000 m
4.7 Vibration
(1) Operating
Read:
Write:
1.96 m/s
2
(0.2 G) No unrecoverable error
5 to 300 Hz sine wave sweep, 3 oct./min at Each of 3 directions
1)
,
0.98 m/s
2
(0.1 G) No recording stop
5 to 300 Hz sine wave sweep, 6 oct./min at Each of 3 directions
1)
(2) Non-Operating: 9.8 m/s
2
(1.0 G) No physical and electrical damage. (No disc loaded)
5 to 300 Hz sine wave sweep, 1 oct./min at Each of 3 directions
1)
(3)Transportation: 8.04 m/s
2
(0.82 G) No damage must results. (Packed unit)
5 to 50 Hz random vibration for 20 min at Z-axis direction.
*
1)
3direction : X (left and right), Y (back and front), Z (top and bottom) axis
4.8 Shock
(1) Operating
Read:
write:
49 m/s
2
(5 G)
No unrecoverable error (“Retries” are allowed.)
11 ms Half sine wave(5 time shocks, 5 s between shocks. ) at Each of 3 directions
1)
1.96 m/s
2
(0.2 G) No recording stop.
11 ms Half sine wave, at Each of 3 directions
1)
(5 time shocks, 5 s between shocks. )
(2) Non-Operating: 980 m/s
2
(100 G) No damage after shock. (No disc loaded)
2 ms Half sine wave at Each of 3 directions
1)
*
1)
3direction : X (left and right), Y (back and front), Z (top and bottom) axis
4.9 Drop Impact
Less than 60 cm
Note: Bulk package, 1 Corner, 3 Edges, 6 Faces.
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
12/24
5. Quality and Reliability
5.1 MTBF
Assumption:
-POH per year
-ON/OFF cycles per year
-Operating duty cycle
5.2 Tray Cycle Test
5.3 Actuator Mechanism
5.4 MTTR
(Mean Time to Repair)
5.5 Component Life
Assumption:
60,000 Power On hours (POH)
Used in a normal office environment at room temperature.
3,000
480
10% of Power on time (Seek: 10% of operating time)
10,000 times tray open/close cycle test
1,000,000 full stroke seek
0.5 h
5 years or 2,000h of Laser radiating time
Used in a normal office environment
6. Electro Static Discharge Susceptibility (ESD)
Up to 6 kV(contact)
Up to 8 kV(contact)
No user detectable data error
No catastrophic failure or damage
Up to 10kV (Air)
Up to 15kV (Air)
No user detectable data error
No catastrophic failure or damage
* Test Conditions : C = 150pF, R = 330 ohms, 20 times discharge
except Optical Pick-up block and Connector
7. Power Requirements
7.1 Source Voltage
+5V
±5% Ripple Less than 100 mVp-p
7.2 Current
DIPM on (Partial)
*1
DIPM on (Slumber)
*1
Continuous Read
Continuous Write
Seek
60 mA typ.
20 mA typ.
750 mA typ.
750 mA typ. (DVD-ROM 8x max. CAV)
800 mA typ.
(CD-ROM 24x max. CAV)
(CD-R 24x CAV)
750 mA typ. (DVD+R 8x CAV)
800 mA typ. (DVD+/-R DL 6x ZCLV)
950 mA typ., 1.3 A max. (CD-ROM 24x max. CAV)
Spin UP(Spindle motor start up) 1.0 A typ., 1.6 A max. (CD-ROM 24x max. CAV)
Maximum Current 1.6 A
*1) If Zero Power Function is supported, 0 mA
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
13/24
8. Acoustic Noise
Less than 50dBA at 0.25m away from Bezel and 0.45m height away
(ISO7779 Seated Operator Position)
Note : 1. Disc : Less than Unbalance 0.3g·cm
2. Installation : Horizontal
3. Ambient Temperature : Normal Temperature
4. Except loading and unloading
9. Dimensions
WxHxD 128 x 12.7 x 127 mm ( Refer to Section 13.)
10. Mass
11. Mechanicals
Max.140g (without bezel)
11.1 Disc Loading
Drawer type manual load / Electrical release
11.2 Mounting Requirements
Horizontal
15
°
15
°
15
30
° 15°
° 5°
Vertical
15
45
°
°
15
15
°
°
-Note-
5
° 15°
Operation with postures other than the above drawings is not guaranteed.
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
14/24
11.3 Installation conditions
If the drive is not installed under the following conditions, it may not operate properly or cause
damage to the drive.
(1)When mounting the equipment, use tapping screw holes located on the left and right both sides
of the equipment.
When using screws to fix the connector from the host computer to the equipment, use tapping
screw holes located on the back side of the equipment.
■ Recommended screw tightening torque : 0.2N·m
■ Required screw depth : Max.1.5mm or Max.2.5mm
(See Chapter 13 Mechanical Dimensions for detail.)
(2)Do not apply an excessive force (press, pull or twist) to avoid distorting the equipment.
■ Recommended width of the mounting frame surface on left and right
Dimension L : 102.6+0.2/-0.2mm (See Fig.1)
■ Recommended value for Top and bottom case : See Fig.1 and Fig.2 for detail.
■ After mounting the connector, do not apply excessive force the connector of the equipment
in horizontal and/or vertical direction.
■ Tighten screws evenly.
■ Mounting frame surface contacted with the equipment must be flat.
(3)Allow enough space as much as possible in all directions around the equipment so the
equipment does not apply any vibration, mechanical shock, etc. from peripheral instruments.
■ For the maximum dimension of the equipment thickness
Recommended clearance : more than 0.5mm.
■ Recommended clearance around the front bezel : more than 1mm .
L
Less than 3N
Less than 1N
Less than 0N
15mm
30mm
Fig.1 top view
Vertical direction force
(See Fig.1)
Less than 5N
(Horizontal direction)
(Press or pull)
Less than 2N
Less than 5N
(Horizontal direction)
Less than 1N
(Vertical direction / on all areas)
(Press or pull)
Fig.2 front view
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
12. Controls and Functions
12.1 Front View
(1) Eject Button
< Front View >
Indicator
12.2 Rear View
Power Segment
< Rear View >
12.3 Connector Pin Assignment
Signal Segment
T.00
15/24
(2) Manual Emergency Eject Hole
The emergency eject procedure should
only be used to retrieve your disc
if the drive fails to eject.
Caution : Shut down the power supply
when this eject will be used.
Power Segment
Pin P1
Signal Segment
Pin S1
Drive
Top side
Pin Function
S1 GND
S2 A+
S3 A-
S4 GND
S5
S6
B-
B+
S7 GND
Differential signal pair from host controller.
Differential signal pair to host controller
Cable
Usage
1 st
mate
2 nd
mate
2 nd
mate
1 st
mate
2 nd
mate
2 nd
mate
1 st
mate
Backplane
Usage
1 st
mate
2 nd
mate
2 nd
mate
1 st
mate
2 nd
mate
2 nd
mate
1 st
mate
P1
P2
DP* Device Present
+5V
P3 +5V
P4 DA* Device Attention
Last mate
2 nd
mate
2
2 nd nd
mate
mate
Last mate
2 nd
2 nd
2 nd
mate
mate
mate
P5
P6
GND
GND
1 st
mate
1 st
mate
1
1 st st
mate
mate
*Pull down DP pin with 1kohm(+/-10%) resistor in ODD.
*DA pin caution: Keep DA pin to be Pull-up for ZPO system or Open state for other system in Host side.
*DP pin caution: Keep DP pin to be Open state in Host side if no need Hot Swap.
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
13. Mechanical Dimensions
T.00
16/24
Direction
Rating Label
* Bezel design recommendation for Button & LED area
Bezel mating plane Bezel mating plane
0.4
+0/-0.1
Min 0.2
Depth
Mounting frame of the host computer
Bezel Button Knob height LED Lens height
Notes
1.M2 tapped holes for installation (Clamping Torque 2.0kgf-cm MAX.)
2.Unless otherwise specified, dimensional tolerance are +/-0.5mm.
3. Bezel design has to follow GBAS Spec which is specified in SFF-8552
Mounting Screw
M2
Surface of the drive
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
14. Packaging
T.00
I tapping
30units/box
325*325*205(mm)
17/24
ANTI-STATIC BAG
Packing cushion
Partition
Area of box label
SIZE : 90 x 120 mm
Area of destination label
(Only HEPM)
Paper pallet
1,080units/Pallet
1,000*1000*960(mm)
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
15. Supported Command List
15.1 ATA Commands
< Command >
< Code >
(1) ATAPI Packet Command A0h
(2) ATAPI Soft Reset
(3) Check Power Mode
08h
E5h
(4) Execute Drive Diagnostics
(5) Flush Cache
(6) Identify Packet Device
(7) Idle Immediate
(8) NOP
(9) Set Features
(10) Sleep
(11) Standby Immediate
(12) Standby
90h
E7h
A1h
E1h
00h
EFh
E6h
E0h
E2h
15.2 ATAPI Packet Commands
< Command > < Code >
(1) BLANK
A1h
(2) CLOSE TRACK/RZONE/SESSION/BORDER
(3) FORMAT UNIT
(4) GET CONFIGURATION
5Bh
04h
46h
(5) GET EVENT STATUS NOTIFICATION
(6) GET PERFORMANCE
(7) INQUIRY
(8) MECHANISM STATUS
(9) MODE SELECT (10)
(10) MODE SENSE (10)
(11) PAUSE/RESUME
(12) PLAY AUDIO (10)
(13) PLAY AUDIO (12)
(14) PLAY AUDIO MSF
(15) PLAY AUDIO TRACK RELATIVE (10)
(16) PLAY AUDIO TRACK RELATIVE (12)
(17) PREVENT ALLOW MEDIUM REMOVAL
(18) READ (10)
(19) READ (12)
(20) READ BUFFER
(21) READ BUFFER CAPACITY
(22) READ CAPACITY
(23) READ CD
(24) READ CD MSF
(25) READ DISC INFORMATION
(26) READ DVD STRUCTURE
(27) READ FORMAT CAPACITIES
(28) READ HEADER
(29) READ SUB-CHANNEL
(30) READ TOC/PMA/ATIP
(31) READ TRACK/RZONE INFORMATION
(32) REPAIR RZONE
(33) REPORT KEY
47h
49h
A9h
1Eh
28h
A8h
3Ch
5Ch
25h
BEh
4Ah
ACh
12h
BDh
55h
5Ah
4Bh
45h
A5h
B9h
51h
ADh
23h
44h
42h
43h
52h
58h
A4h
18/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
< Command >
< Code >
(34) REQUEST SENSE
(35) RESERVE TRACK/RZONE
(36) SCAN
(37) SEEK
(38) SEND CUE SHEET
(39) SEND DVD STRUCTURE
(40) SEND KEY
(41) SEND OPC INFORMATION
(42) SET CD SPEED
(43) SET READ AHEAD
03h
53h
BAh
2Bh
5Dh
BFh
A3h
54h
BBh
A7h
(44) SET STREAMING
(45) START/ STOP UNIT
(46) STOP PLAY/SCAN
(47) SYNCHRONIZE CACHE
(48) TEST UNIT READY
(49) VERIFY(10)
(50) VERIFY(12)
(51) WRITE(10)
(52) WRITE(12)
(53) WRITE AND VERIFY(10)
(54) WRITE BUFFER
B6h
1Bh
4Eh
35h
00h
2Fh
AFh
2Ah
AAh
2Eh
3Bh
15.3 S-ATA function
SSC (Spread Spectrum Clocking)
CONT Primitive
Asynchronous signal recovery (Hot Plug)
Software Setting Preservation
Phy Event Counter
HIPM (Host Initiated Power Management)
DIPM (Device Initiated Power Management)
Asynchronous notification
BIST-L
BIST-TSA
Disable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Enable
19/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
16. Regulations and Standards
16.1 Safety
The product will satisfy the safety standards outlined below.
UL
TUV
SEMKO
CB & IEC60825-1 Report
FDA
SONCAP
NOM
16.2 EMC / EMI
The product complies with applicable technical requirements as specified below
KCC
BSMI
CE
FCC
VCCI
C-TICK
GOST
16.3 Laser safety
The product will satisfy all the requirements for the laser specified below.
Class 1 laser product comply with DHHS rules 21 CFR Subchapter J
Class 1 laser product to EN60825-1 / IEC 60825-1
17. Supporting Operating System & Recording tool
17.1 Operating System
Windows 7
Windows Vista Home Basic, Home Premium, Business, Ultimate Edition
Windows XP Home Edition, Professional, Media Center Edition
Windows 2000 Professional
17.2 Writing Software
(1) Digital Media (Roxio)
(2) Nero (Ahead)
(3) CD/DVD Maker (NTI)
(4) CD File (NTI)
20/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
T.00
18. Caution
To use the drive safely and properly, the following precaution should be reserved.
18.1 Safety
(1) Disassembling and Modification
The drive includes Laser Diodes.
The disc rotates at high speed when the power is supplied to the drive.
Do not disassemble or modify the drive when the power is supplied.
Also the modified drives should be under the responsibility of the company
or the persons who modified it.(Firmware issue should be specified separately.)
(2) POWER
Do not use the power supply other than the specific voltage(+5V DC).
(3) Reserve the following instructions to avoid the electrical short or the damages.
a) Do not dispose the drive to the water or the high humidity
b) Do not open or remove the cover.
c) Do not remove the front bezel.
d) Do not let any liquid or foreign substances in the drive.
e) Do not put heavy things on the drive.
(4) In the case of the failure
In case of the following conditions, turn off the SYSTEM including the Drive
And unplug the power supply cable of the SYSTEM from the wall outlet immediately.
a) Do not disassemble or repair the drive by yourself.
b) When some liquid or some foreign substances is in the drive.
c) When the drives are wet by the water.
d) When the drive is dropped
e) When the performance of the drive is extremely degraded or when the drive does not
work properly.
18.2 Dust
We can’t guarantee about dirt in the state without a bezel.
The guarantee environment of dirt is a thing under the environment of 0.15 mg/m
3
.
21/24
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
Appendix 1. Bezel and Tray, LED, Region
1. Bezel, Tray (No Bezel type)
Part Color Material
1 Bezel & Eject button -
2 Tray Black
ASAHIKASEI PPE+PS
(XYRON X351V)
Yoowon Com-Tech PPE+PS
(UWF-02F15)
2. LED (Brightness and Current are typical value.)
Color Green
Brightness 20mA 100mcd (LED spec.)
Actual current 17mA (measured by this model)
3. LED control
Power on, Disc Recognition:
Load:
Unload:
Data access/ read:
Writing:
Polling command:
The others:
Flashing
Flashing
On
On
On
Off
Off
4. Chassis
Top cover
Bottom cover
Aluminum
Aluminum
5. Region Setting:
No Region
T.00
22/24
Flammability
-
ULV-1
HLDS CONFIDENTIAL
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
LGE LABEL INFORMATION
Standard Label
Super Multi DVD Rewriter
MODEL :
GT60N
S/N: YMMFLXX000001
2010 01 15 MANUFACTURED : JANUARY 2010
XXX-XXXXXXX (B)
ROM VER.: XXXX
RoHS
T.00
23/24
LABEL SIZE : 53(W) x 39(H) x 0.1(t)
LABEL P/N : MEZ62216908
*Barcode Label Detail Printed Information*
1. Product Name:
Super Multi DVD Rewriter
2. Model name :
GT60N
3. MANUFACTURED: JANUARY 2010
4.
制造日期 (YEAR, MONTH, DATE) :
2010 01 15
5. Barcode of Information (Code : 39Code)
- S/N: YMMFLXX000001
Y
: Y ear. (2010 : 0, 2011 : 1, 2012 : 2….)
MM
:Month.
FL : Factory Line Code.
XX
: Secret Code
000001
: Serial Number
6. ROM VER. :
XXXX
DO NOT PRINT “XXXX” ON MAIN LABEL.
Please refer to the F/W section or SR PAGE.
7. KCC No (
인증번호) :
XXX-XXXXXXX (B)
8.
RoHS
Hitachi-LG Data Storage Inc.
Issued Date
Revised Date
Jan, 18, 2012
GT80N
(Standard)
Appendix 3. Box label Specification
(Product of Malaysia)
Product Name
#2
Model Name
#3
Suffix
#4
Model.Suffix
#5
G-code.
#6
Serial No.
#7
T.00
24/24
Q’TY
Origin
#8
#9
#6 G-code
*. Barcode Information
XXXXXXXXXXXX
- Code-39
Toshiba G-code : Refer to the PR or SR
#5 Model.Suffix
*. Barcode Information
Model.Suffix
- Code-39
Model.Suffix : Refer to the PR or SR
#7 Serial No.
*. Barcode Information
B0FRIT7000001
- Code-39
S/N : B0FRIT7000001
B : Place of product ( Factory code )
0 : Last figure of year
F : Manufacturing month symbol
RIT7 : HEPM code
000001 : Serial Number
#9 Origin
Producing Center
-. KOREA = MADE IN KOREA
-. LGEHZ = MADE IN CHINA
-. HEPM = MADE IN MALAYSIA
HLDS CONFIDENTIAL
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project