null null

CompactPCI, CompactPCI PlusIO
and CompactPCI Serial
Rugged and Safe CompactPCI Platforms for Transport and Industry
Discover the World of
Compact PCI®
CompactPCI / PlusIO / Serial Made by MEN:
Benefit from our extensive range of
standard CompactPCI boards and systems
fitting your final solution – the more
rugged, the better.
PICMG 2.30
since 2009
100 %
PCI compatibility
Availavility
of 7+ years
CompactPCI – PICMG 2.0
Today’s users appreciate the modularity and
robustness of CompactPCI. Based on this established standard, CompactPCI Serial offers fast
serial data transfer in addition, with CompactPCI
PlusIO as the migration path between the two.
PICMG 2.0
since 1995
CompactPCI
> 30
SIL 4
suppliers
CompactPCI
PlusIO
CompactPCI
Serial
solutions
Up to 60 W
per 3U slot
Operating
temperatures
– 40 to + 85 °C
PICMG CPCI-S.0
since 2011
> 12 Gb/s
data rate
CompactPCI PlusIO – PICMG 2.30
CompactPCI PlusIO is fully downward-compatible
to the basic CompactPCI standard. It defines the pin
assignment and the function of the user pins on the
J2 connector for 32-bit system slots: 4 × PCIe, 4 × SATA,
4 × USB, 2 Gb Ethernet.
CompactPCI Serial – PICMG CPCI-S.0
CompactPCI Serial defines a new connector for transmission
frequencies of more than 12 Gb/s, supporting 8 × PCIe,
8 × SATA, 8 × USB and 8 × Ethernet on the backplane. It uses
the same mechanics as CompactPCI, remaining compatible
to IEC 1101.
3U CompactPCI / PlusIO CPU Boards
4
3U CompactPCI PlusIO
F23P – Intel Core i7 4th gen
CPU Board
»» Intel Core i7, 4th generation
»» Quad-core 64-bit processor
»» For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems
(2.0 and CPCI-S.0)
»» Up to 32 GB DDR3 DRAM soldered, ECC
»» microSD card and mSATA slots
»» Front I/O: VGA, 2 Gbit Ethernet, 2 USB
»» Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet
»» Other I/O (onboard, side card): SATA, HDMI/Display Port, HD audio,
USB, UART etc.
»» 2.4 to 3.4 GHz Turbo Boost, Hyper-Threading, Active Management Technology
»» Open CL support
3U CompactPCI PlusIO
F22P – Intel Core i7 3rd gen
CPU Board
»» Intel Core i7, 3rd generation
»» Quad-core 64-bit processor
»» For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems
(2.0 and CPCI-S.0)
»» Up to 16 GB DDR3 DRAM soldered, ECC
»» microSD card and mSATA slots
»» Front I/O: VGA, 2 Gbit Ethernet, 2 USB
»» Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet
»» Other I/O (onboard, side card): SATA, SDVO, HDMI/Display Port, HD audio,
USB, UART etc.
»» 2.3 to 3.3 GHz Turbo Boost, Hyper-Threading, Active Management Technology
»» Open CL 1.1 support
3U CompactPCI PlusIO
F21P – Intel Core i7 2nd gen
CPU Board
»» Intel Core i7, 2nd generation
»» Quad-core 64-bit processor
»» For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems
(2.0 and CPCI-S.0)
»» Up to 16 GB DDR3 DRAM soldered, ECC
»» microSD card and mSATA slots
»» Front I/O: VGA, 2 Gbit Ethernet, 2 USB
»» Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet
»» Other I/O (onboard, side card): SATA, SDVO, HDMI/Display Port, HD audio,
USB, UART etc.
»» 2.0 to 3.0 GHz Turbo Boost, Hyper-Threading, Active Management Technology
»» Open CL 1.1 support
3U CompactPCI PlusIO
F19P – Intel Core 2 Duo CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
Intel Core 2 Duo SP9300, 2.26 GHz
Dual-core 64-bit processor
32-bit 4HP system master (or stand-alone)
For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems
(2.0 and CPCI-S.0)
Up to 4 GB DDR3 DRAM soldered
CompactFlash and microSD card slots
Front I/O: VGA, 2 Gb Ethernet, 2 USB
Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet
Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc.
Board controller
–40 °C to +85 °C screened version
3U CompactPCI
F11S – Intel Atom CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
32-bit 8HP CompactPCI system slot
Intel Atom Z510P, Z530P, Z510PT, Z520PT
Up to 2 GB DDR2 SDRAM
2 MB SRAM
CompactFlash
microSD slot
1 SATA interface via rear I/O
VGA, 2 USB, PS/2, 1 UART
1 Gigabit and 1 Fast Ethernet
FPGA for individual user I/Oat rear
–40 °C to +85 °C screened or with qualified components
3U CompactPCI
F218 – PowerPC MPC8314 Slave
CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
32-bit/33-MHz CompactPCI
4HP peripheral slot or stand-alone function
PowerPC MPC8314, 266 MHz
Host CPU communication via Ethernet
Ultra fast boot < 2 seconds
Flexible FPGA-Flash structure
256 MB SDRAM, 16 MB Flash
Front I/O: 2 Gb Ethernet, 1 UART via SA-Adapter
Rear I/O: user-defined via FPGA (option)
–40 °C to +85 °C with qualified components
3U CompactPCI PlusIO
F50P – PowerPC MPC8548
CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
32-bit CompactPCI and PICMG 2.30 PlusIO
8 HP or 12 HP with front I/O
MPC8548 (or MPC8543), up to 1.5 GHz
Up to 2 GB (ECC) DDR2 SDRAM
Up to 128 KB FRAM, 2 MB SRAM
Up to 16 GB SSD Flash
Standard front I/O: 2 Gb Ethernet, 2 USB
Standard rear I/O: 4 USB, 2 SATA
FPGA for user-defined I/O functions (option)
MENMON BIOS for PowerPC cards
–40 °C to +70 °C (8 HP) (screened)
5
3U CompactPCI / PlusIO Peripheral Boards
3U CompactPCI
F100 – CompactPCI to CompactPCI
Serial Interface Card
3U CompactPCI
F204 / F205 – M-Module Carrier
Boards
3U CompactPCI
F206 – Octal UART for RS232,
RS422, RS485
6
»»
»»
»»
»»
3U CompactPCI
F211 – Quad Fast Ethernet
Interface
»»
»»
»»
»»
»»
»»
4 HP 32-bit/33-MHz CompactPCI
4 full-duplex or half-duplex channels
10BASE-T and 100BASE-TX physical layer
Fully integrated to comply with IEEE802.3u
1500 V isolation voltage
–40 °C to +85 °C qualified
3U CompactPCI
F212 – PCIe Mini Card Carrier
for Wireless Functions
»»
»»
»»
»»
»»
»»
4 HP 32-bit/33-MHz CompactPCI
Up to 2 PCI Express Mini Cards
ExpressCard/34 or 54 modules optional
For cards with internal USB interface
For HF applications (WLAN, UMTS, GPS, GSM, HSDPA)
–40 °C to +85 °C with qualified components
3U CompactPCI
F213 – PMC Carrier
»»
»»
»»
»»
4 HP 32-bit/33-MHz CompactPCI
1 32-bit/33-MHz or 66-MHz PMC slot
Optional Mini PCI card slot
–40 °C to +85 °C with qualified components
3U CompactPCI
F215 – Universal Interface Board
»» 5 interfaces at 8 HP front: 2 UARTs, 2 CAN bus, 1 binary I/O port
»» Other function combinations via FPGA IP cores
»» For protocols/physical layers like RS232/RS422/RS485, HDLC, InterBus-S, CAN
bus, binary I/O
»» Physical layers via SA-Adapters
»» –40 °C to +85 °C with qualified components
3U CompactPCI
F216 – Octal UART
»»
»»
»»
»»
»»
»»
»»
Octal 16550 UART
RS232/422/485, isolated
Large receive and transmit FIFOs
Very high data rates up to 921 600 bit/s
Full handshake support
Hardware flow control for RS485 half duplex
–40 °C to +85 °C with qualified components
3U CompactPCI
F217 – Memory Card Carrier
»»
»»
»»
»»
»»
»»
»»
4 HP 32-bit/33-MHz CompactPCI
USB Flash Media Controller
Multi card reader: MS, SD, MMC
CompactFlash socket
Hot-plug at front
–40 °C to +85 °C screened
EN 50155 compliant (railways)
4 HP 32-bit/33-MHz CompactPCI
Replaces system slot card
For operation together with G100 peripheral slot card for CompactPCI Serial
1 PCI Express x1 link
»» 1 CompactPCI bus slot
»» 1 or 2 M-Module slots
»» –40 °C to +85 °C versions with qualified components
»»
»»
»»
»»
»»
»»
»»
»»
»»
Octal 16450 UART
RS232/RS422/RS485, isolated/not isolated
Physical layer via SA-Adapters
Large receive and transmit FIFOs
Very high data rates up to 2 Mbit/s
Full handshake support
Hardware flow control for RS485 half duplex
Also for other protocols like HDLC
–40 °C to +85 °C with qualified components
3U CompactPCI
F206N – Nios II Slave Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
32-bit/33-MHz CompactPCI
Peripheral slot function
FPGA 12,000 LEs (approx.144,000 gates)
Nios II soft processor
32 MB SDRAM, 2 MB Flash
Flexible FPGA-Flash structure
Open platform FPGA development package
Support of Wishbone and Avalon bus
–40 °C to +85 °C with qualified components
3U CompactPCI
F207 – PCI-104 Carrier Board
»»
»»
»»
»»
»»
1 PCI-104 slot
For stacking of up to 4 PCI-104 modules
8 HP CompactPCI with one PCI-104 module
PCI-to-PCI bridge
–40 °C to +85 °C with qualified components
7
8
3U CompactPCI
F223 – PCIe Mini Card Carrier for
Wireless Functions
»»
»»
»»
»»
»»
»»
»»
2 PCI Express Mini Cards (full-/half-size)
For wireless applications (WLAN/WAP, UMTS, GPS, GSM, HSDPA, LTE)
2 or 3 external antennas per module (reverse SMA)
Up to 18 SIM card slots
For cards with internal PCI Express and USB interface
–40 °C to +85 °C screened, conformal coating
4 HP 32-bit/33-MHz CompactPCI
3U CompactPCI
F305 – Quad Fast Ethernet /
Real-Time Ethernet Interface
»»
»»
»»
»»
»»
»»
»»
»»
4 HP 32-bit/33-MHz CompactPCI
4 Ethernet channels, 100 Mbit/s
Real-time Ethernet capability
Optical isolation from other cards
Full EN 50155 compliance
-40°C to +85°C qualified
Conformal coating
For rolling stock and wayside applications
3U CompactPCI
F403 – Binary I/O Card
for Railways
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
4HP 32-bit/33-MHz CompactPCI
16 bidirectional binary I/Os
Organized in 4 optically isolated groups
Connected via spring cage terminal blocks
Reduced wiring for fast installation
I/O voltage range 14.4 VDC to 154 VDC
Current output 1 A at 24 V
Driver support for all common operating systems
–40 °C to +85 °C with qualified components
Conformal coating
EN 50155 compliant
3U CompactPCI
F701 – MVB Interface Card
»»
»»
»»
»»
»»
»»
»»
4HP 32-bit/33-MHz CompactPCI
MVB Interface EMD/ESD+ according to IEC 61375 (TCN Standard)
MVB Bus Administrator
4096 Process Data ports
Message Data stack
Driver support for WinXP, Win7 32/64bit and Linux
–40 °C to +70 °C screened
3U CompactPCI
F750 –CANopen Interface Board
»»
»»
»»
»»
»»
»»
»»
4HP 32-bit/33-MHz CompactPCI
Full CAN/Extended CAN according to ISO-11898
CANopen master and slave by loadable firmware
Based on netX universal network controller
Optical isolation with 1000 VDC isolation voltage
Driver support for all common operating systems
–20 °C to +70 °C screened
3U CompactPCI
F751 – DeviceNet Interface Board
»»
»»
»»
»»
»»
»»
»»
4HP 32-bit/33-MHz CompactPCI
DeviceNet interface according to ISO-11898
DeviceNet master and slave by loadable firmware
Based on netX universal network controller
Optical isolation with 1000 VDC isolation voltage
Driver support for all common operating systems
–20 °C to +70 °C screened
3U CompactPCI
F752 – Real-Time Ethernet
Interface Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
4HP 32-bit/33-MHz CompactPCI
Up to 100 MBit/s real-time Ethernet depending on loaded firmware
PROFINET (Controller & Device)
EtherCAT (Master & Slave)
Ethernet PowerLink (Controlled Node)
EtherNet/IP (Scanner & Adapter)
OpenModbus (Server & Client)
Sercos (Master & Slave)
VARAN (Client)
Based on netX universal network controller
Optical isolation with 1000 VDC isolation voltage
Driver support for all common operating systems
0 °C to +70 °C screened
3U CompactPCI
F753 – PROFIBUS Interface Board
»»
»»
»»
»»
»»
»»
»»
4HP 32-bit/33-MHz CompactPCI
Isolated RS485 interface
PROFIBUS DP master, DP slave and MPI device determined by loadable firmware
Based on netX universal network controller
Isolation with 1000 VDC voltage
Driver support for all common operating systems
–20 °C to +70 °C screened
9
3U CompactPCI Serial CPU Boards
3U CompactPCI Serial
G25A – Intel Xeon D CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
Intel Xeon D-1500, up to 16 cores
Up to 32 GB DDR4 DRAM soldered, ECC
2 10 Gb Ethernet, 1 Gb Ethernet, 1 USB 3.0, 1 RS232 for configuration
4 HP system master and peripheral slot
PICMG CPCI-S.0 CompactPCI Serial
microSD card slot
Standard rear I/O: 28 PCIe lanes, 2 USB 3.0, 6 SATA, 4 Gb Ethernet
Built-in Intel VT hardware virtualization
Trusted Platform Module (TPM)
3U CompactPCI Serial
G23 – Intel Core i7 4th gen
CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
Intel Core i7, 4th generation, Quad-core 64-bit processor
4 HP system master and peripheral slot
PICMG CPCI-S.0 CompactPCI Serial
Up to 32 GB DDR3 DRAM soldered, ECC
mSATA and microSD card slots
Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2 USB 3.0
Standard rear I/O: 7 PCIe, 8 USB 2.0, 2 USB 3.0, 5 SATA, DisplayPort/HDMI
Rear I/O via mezzanine board: up to 8 Gigabit Ethernet
Intel Turbo Boost, Hyper-Threading, AMT 9.0, Open CL support
»»
»»
»»
»»
»»
»»
»»
»»
»»
Intel Core i7, 3rd generation, Quad-core 64-bit processor
4 HP system master and peripheral slot
PICMG CPCI-S.0 CompactPCI Serial
4 or 8 GB DDR3 DRAM soldered, ECC
mSATA and microSD card slots
Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2USB 2.0
Standard rear I/O: 7 PCIe, 4 USB 2.0, 4 USB 3.0, 5 SATA, DisplayPort/HDMI
Rear I/O via mezzanine board: up to 8 Gigabit Ethernet
Intel Turbo Boost, Hyper-Threading, AMT 8.0, Open CL support
3U CompactPCI Serial
G101 – Managed Industrial
Ethernet Switch with Uplink
»»
»»
»»
»»
»»
»»
»»
»»
»»
Intel Core i7, 2.53 GHz, Dual-core 64-bit processor
PICMG CPCI-S.0 CompactPCI Serial
Up to 4 GB DDR3 DRAM soldered, ECC
mSATA and microSD card slots
Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2 USB
Standard rear I/O: 7 PCIe, 8 USB, 6 SATA, DisplayPort/HDMI
Rear I/O via mezzanine board: up to 8 Gigabit Ethernet
Intel Turbo Boost 2.53..3.2 GHz, Hyper-Threading, Active Management Technology
Open CL 1.1 support
»»
»»
»»
»»
»»
»»
»»
»»
3U CompactPCI Serial
GE1 – 4-Port Gigabit Copper
Ethernet Line Card with PoE
»»
»»
»»
»»
»»
»»
»»
3U CompactPCI Serial
G22 – Intel Core i7 CPU Board
3U CompactPCI Serial
G20 – Intel Core i7 CPU Board
3U CompactPCI Serial
G52A – QorIQ Network CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
10
Freescale QorIQ, up to 12 cores
Up to 12 GB DDR3 DRAM soldered, ECC
Standard front I/O: 2 10 Gb Ethernet, 1 Gb Ethernet, 1 USB 2.0 host, 1 USB
configuration port (RS232)
Standard rear I/O: 14 PCIe lanes, 1 USB 2.0, 2 SATA, 3 Gb Ethernet
4 HP system master and peripheral slot
microSD card slot
CPU TDP from 32 W to 61 W
Board Management Controller, Watchdog
3U CompactPCI Serial
G51 – QorIQ Communications
CPU Board
»»
»»
»»
»»
»»
»»
»»
»»
»»
Single-board computer with up to 4 Gb Ethernet
P3041 Freescale QorIQ quad-core PowerPC processor
4 HP system master and peripheral slot
PICMG CPCI-S.0 CompactPCI Serial
Up to 8 GB DDR3 SDRAM soldered, ECC
Standard front I/O: 3 Gb Ethernet, 2 USB 2.0
Standard rear I/O: 3 PCIe, 4 Gb Ethernet, 6 USB 2.0, 2 SATA (3 Gb)
–40 °C to +85 °C with qualified components
Compliant to EN 50155 (railways)
3U CompactPCI Serial System & Peripheral Slot Boards
3U CompactPCI Serial
GX1 – PCI Express Switch
Available soon
»»
»»
»»
»»
»»
»»
»»
64-Lane, 16-Port switch
PCI Express Generation 3 switching over CompactPCI Serial
1 GB/s per lane for each point-to-point serial link
Programmable configuration of PCIe ports according to backplane design
Software tools for diagnostics and performance monitoring
Dedicated upstream links for multiple CPUs
Multicast / broadcast capability
Managed rugged Ethernet switch
Up to 25 Gigabit Ethernet ports on rear I/O
Or 3 ports on front and up to 22 ports on rear
29 Gbit/s carrier grade switch matrix
Special switch protocols
-40°C to +85°C with qualified components
EN 50155 class TX compliant (railways)
PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card
4 Gigabit Ethernet on RJ45 connectors (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
–40 °C to +85 °C with qualified components
EN 50155 classTx (railways)
PICMG CPCI-S.0 CompactPCI Serial
IEEE 1588v2 supported (together with G101)
11
3U CompactPCI Serial
GP1 – 4-Port Gigabit Ethernet PHY
Line Card with PoE
»»
»»
»»
»»
»»
»»
»»
3U CompactPCI Serial
GP2 - 4-Port Gigabit SFP PHY
Line Card
»» 100/1000 Mbit/s SFP modules supported
»»
FX / SX / LX / ZX modules supported
»»
4 SFP cages
»»
LEDs for link and activity status
»»
-40 to +85°C with qualified components
»»
EN 50155 classTx (railways)
»»
PICMG CPCI-S.0 CompactPCI Serial
3U CompactPCI Serial
G302 – Managed 16-Port
Rugged Industrial Ethernet Switch
»»
»»
»»
»»
»»
»»
»»
»»
»»
4 Gigabit Ethernet on RJ45 connectors (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
–40 °C to +85 °C with qualified components
EN 50155 classTx (railways)
PICMG CPCI-S.0 CompactPCI Serial
IEEE 1588v2 support (optional)
Managed 16-port rugged Ethernet switch
Up to 16 Gigabit Ethernet ports on rear I/O
Or 3 ports on front and up to 13 ports on rear
Configuration via Telnet CLI, SNMP ver. 3 or external dongle
Service interface via M12
LEDs for front port and board states
–40 °C to +85 °C with qualified components
EN 50155 class TX compliant (railways)
PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card
3U CompactPCI Serial Peripheral Boards
12
3U CompactPCI Serial
G100 – CompactPCI Serial to
CompactPCI Interface Card
»»
»»
»»
»»
For operation together with F100 system slot card for CompactPCI
1 PCI Express x1 link
–40 °C to +85 °C with qualified components
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G201 – USB 3.0 Interface
»»
»»
»»
»»
4 USB 3.0 host interfaces
Data rate up to 5 Gbit/s per direction per port
–40 °C to +85 °C screened
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G204 – M-Module Carrier Board
»» 1 M-Module slot
»» –40 °C to +85 °C with qualified components
»» PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G211 – Quad Gigabit Ethernet
Interface
»»
»»
»»
»»
»»
»»
»»
»»
Four 10/100/1000Base-T Ethernet channels
Alternatively two redundant channel pairs
Full-duplex or half-duplex
RJ45 or robust M12 connectors
Fully integrated to comply with IEEE802.3u
1500 V isolation voltage
–40 °C to +85 °C screened
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G211F – Quad Fiber Optics
Interface
»»
»»
»»
»»
»»
»»
»»
Four optical transceiver channels 1000BASE-SX
Alternatively two redundant channel pairs
Full-duplex or half-duplex depending on transceiver
Fully integrated to comply with IEEE802.3x
500 V isolation voltage
–40 °C to +85 °C screened (without transceivers)
4HP PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G212 – PCIe Mini Card Carrier
for Wireless Functions
»»
»»
»»
»»
»»
»»
Up to 2 PCI Express Mini Cards (full-size)
ExpressCard/34 or 54 modules optional
For cards with internal PCIe and USB interface
For HF applications (WLAN, UMTS, GPS, GSM, HSDPA)
–40 °C to +85 °C screened
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G213 – XMC/PMC Carrier
»»
»»
»»
»»
1 XMC slot (PCIe 2 x4 links)
or 1 PMC slot (32/64 bits, 33/66/133 MHz, PCI-X)
–40 °C to +85 °C screened
PICMG CPCI-S.0 CompactPCI Serial peripheral card
13
3U CompactPCI Serial
G214 – Multi-Display Controller
»»
»»
»»
»»
»»
»»
»»
»»
3U CompactPCI Serial
G215 – Universal Interface Board
»» 5 interfaces at 8 HP front: 2 UARTs, 2 CAN bus, 1 binary I/O port
»» Other function combinations via FPGA IP cores
»» For protocols/physical layers like RS232/RS422/RS485, HDLC, CAN bus, IBIS,
GPS, binary I/O
»» Physical layers via SA-Adapters
»» –40 °C to +85 °C with qualified components
»» PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G301 – Unmanaged 4-Port
Rugged Industrial Ethernet Switch
14
AMD Radeon E6760 GPU, 600 MHz
6 SIMD engines, 480 shaders, 1 GB integrated graphics RAM
AMD EyeSpeed, Eyefinity and HD3D technologies
DirectX 11, OpenGL 4.1, OpenCL 1.1
Up to 6 DisplayPort (4 DP 1.2, 2 DP 1.1a)
Max. resolution 4096x2560 at 60 Hz, 24 bpp or 3840x2400 at 60 Hz, 30 bpp
1 PCIe x8 CPU interface
PICMG CPCI-S.0 CompactPCI Serial peripheral card
»»
»»
»»
»»
»»
»»
»»
»»
Unmanaged 4-port rugged Ethernet switch
4 Gigabit Ethernet (front) on RJ45 (M12 optional)
Power over Ethernet (PoE) PSE (all ports)
LEDs for link and activity status
1 Gigabit Ethernet on rear I/O (optional)
–40 °C to +85 °C (screened)
EN 50155 class Tx (railways)
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G303 – Unmanaged 16-Port
Rugged Industrial Ethernet Switch
»»
»»
»»
»»
»»
»»
»»
Unmanaged 16-port rugged Ethernet switch
Up to 16 Gigabit Ethernet ports on rear I/O
Or 3 ports on front and up to 13 ports on rear
LEDs for front port and board states
–40 °C to +85 °C with qualified components
EN 50155 class TX compliant (railways)
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G304 – Unmanaged 4-Port
ugged Industrial Ethernet Switch
with PoE+
»»
»»
»»
»»
»»
»»
»»
»»
»»
Unmanaged 4-port rugged Ethernet switch
4 Gigabit Ethernet (front) on RJ45 (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
1 Gigabit Ethernet on rear I/O (optional)
–40 °C to +85 °C (screened)
EN 50155 classTx (railways)
Direct Ethernet CPU connection over P1
PICMG CPCI-S.0 CompactPCI Serial
3U CompactPCI Serial
G501 – SATA HDD/SSD Shuttle
»»
»»
»»
»»
»»
»»
Hard disk drive or solid state drive shuttle
2.5" SATA HDD/SSD slot
Four status LEDs
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI Serial
G503 – Dual SATA HDD/SSD
Shuttle and RAID Controller
»»
»»
»»
»»
»»
»»
»»
»»
Hard disk drive or solid state drive shuttle
Two 2.5" SATA HDD/SSD slots
SATA revision 3.x support
RAID 0, 1 and JBOD in hardware
5 ms HDD power hold-up time
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
PICMG CPCI-S.0 CompactPCI Serial peripheral card
3U CompactPCI / PlusIO Extension Boards
3U CompactPCI PlusIO
CT12 – Rear I/O Transition Module
»»
»»
»»
»»
»»
3U CompactPCI
Various Side Cards for
SATA/Legacy I/O, Multimedia,
USB/COM, Compact PCI Express,
XMC/PMC, Gb Ethernet
»» 4 HP extension for 3U Intel SBCs F14, F15, F17, F18, F19P, F21P, F22P, F23P
CompactPCI PlusIO PICMG 2.30
3U / 100x80 mm standard format
2 Gigabit Ethernet
4 USB 2.0, 4 PCIe x1, 4 SATA
–40 °C to +85 °C qualified
6U CompactPCI Boards
6U CompactPCI
D202 – PC-MIP Carrier Board
»» 1 CompactPCI bus slot
»» 6 PC-MIP slots
6U CompactPCI
D203 – M-Module Carrier Board
»» 1 CompactPCI bus slot
»» 4 M-Module slots
»» –40 °C to +85 °C versions with qualified components
15
Safe Computing
MEN designs and builds reliable, safe computers for highly available and redundant
safety-critical systems up to SIL 4 and DAL-A. Aside from incorporating doubled
or tripled processors, the CPU cards feature redundant main memory, local voltage
supply, FPGA technology, event logging, conduction cooling options and other safety
relevant functions.
3U CompactPCI PlusIO
F75P – Safe Computer
6U CompactPCI
D602 – PowerPC Safe Computer
»» 2 × Intel Atom E6xx, 512 MB DDR2 RAM (each)
for onboard dual redundancy
»» 1 × Intel Atom E6xx, 1 GB DDR2 for I/O
»» Independent supervisors for each block
»» Fail-safe board architecture
»» Clustering of two F75P to raise availability
»» Event logging
»» Certifiable up to SIL 4 (with report from TÜV SÜD)
»» SIL 4 certification packages available for hardware
and software (QNX)
»» Developed according to EN 50129, EN 50128 and IEC 61508
»» Full EN 50155 compliance
»» –40 °C to +85 °C qualified
»» Conformal coating
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
16
3 × PowerPC 750 (lockstep mode), 3 × 512 MB DDR RAM
Fail-operational, fault-tolerant behavior
Fail-safe and fail-silent board architecture
Clustering of two D602 to raise availability
Board management, BITE
SEU (radiation) tolerant
Certifiable up to SIL 4 (with report from TÜV SÜD)
and DAL-A
Developed according to RTCA DO-254, EN 50129
and IEC 61508
EN 50155 compliance
Up to –40 °C to +70 °C with qualified components
Convection or conduction cooling
Rugged Computing
MEN's rugged and reliable embedded computers withstand harsh environments
with extreme temperatures, shock, vibration, dust, humidity and chemical influence.
MEN's electronics are designed for –40 °C to +85 °C and dissipate heat by convection
or conduction cooling. Furthermore every Compact PCI/ Compact PCI Serial board
can be equipped with a metal housing for conductive cooling if it is necessary.
3U CompactPCI
F50C – PowerPC MPC8548
Conduction Cooled SBC
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
CompactPCI Enclosure
Rackmount Enclosure, 3U Cards
with Conduction Cooling
»»
»»
»»
»»
»»
»»
»»
»»
»»
32-bit/33-MHz cPCI system slot
1 slot, 9 HP front, rear I/O
MPC8548 (or MPC8543), up to 1.5 GHz
Up to 2 GB (ECC) DDR2 SDRAM
Up to 128 KB FRAM, 2 MB SRAM
Up to 16 GB SSD Flash
FPGA for user-defined I/O functions
MENMON BIOS for PowerPC cards
–40 °C to +85 °C Tcase screened
Conduction cooling
For standard 3U cards within CCA frames
3-slot 3U backplane
System slot left, horizontal installation
Outline 200 mm x 350 mm x 145 mm
4 MIL-C-38999 connectors (59 user I/O pins)
PSU 18-32 V, 35 W
–40 °C to +70 °C (+85 °C) operating temperature
IP65 compliant
For –40 °C to +85 °C 3U CCA versions of MEN SBCs
F11S, F12N, F14, F15, F17, F18, F19P, F21P, F23P
»» F22P, F75P and for F50C
17
PSUs
3U 6 HP PSU
PU20 - Wide-Range
Power Supply Unit for Railway
Systems, 24 to 110 VDC, 120 W
3U 6 HP PSU
PU21 - Wide-Range
Power Supply Unit for Railway
Systems, 100 to 240 VAC, 120 W
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
3U, 6 HP, 19" rack mountable
Automatic input voltage range detection for 24, 72, 110 VDC
Configurable voltage range for 36, 48, 74, 96 VDC
Output power 120 W without derating
Holdup time 10 ms according to Class S2
Active power sharing
Inverse current protection
Redundant output voltage monitoring
H15 rear connector
–40 °C to +85 °C with qualified components
Conformal coating
Fully S-9401 compliant
Prepared for EN 50155 compliance
Prepared for SIL applications
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
3U, 6 HP, 19" rack mountable
Input voltage range of 100 to 240 VAC
Output power 120 W without derating
Holdup time 20 ms
Active power sharing
Inverse current protection
Redundant output voltage monitoring
H15 rear connector
–40 °C to +85 °C with qualified components
Conformal coating
Fully EN 50155 compliant
Prepared for SIL applications
MTCS Safe System Controller
up to SIL 4
MH50C – Modular Train Control
System for ATO/ATC and ATP
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
SIL 4 Modular Train Control System MTCS
Certified safe CPU board with 3 CPUs
Certified safe I/O boards
QNX safe operating system available
Certification packages available
Extensible by distributed safe I/O boxes connected via real-time Ethernet
Optional MVB interface, RS232, RS422, RS485, CAN, GPS
Compact 40 HP application-ready system
Rack-mounted or wall-mounted
For rolling stock and wayside applications
Built-to-Order Platform
MH70I – Rugged 4U, 40 HP
Modular Industrial PC
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
»»
Compact 40 HP application-ready system
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling
Intel Core i7 or Celeron with standard HMI graphics
Up to 16 GB DDR3 DRAM soldered, ECC
Up to four SATA hard disks for a RAID
Single or redundant power supplies or uninterruptible power supply (AC or DC)
2 CompactPCI slots for fieldbus functions, RS232, analog I/O, digital I/O, Ethernet
2 CompactPCI Serial slots for SATA RAIDs, Ethernet
2 PCI or PCI Express slots for half-length cards
Pre-configured operating system and drivers
Built-to-Order Platform
MH70S – Rugged 4U, 40 HP
Modular Data Storage System
»»
»»
»»
»»
»»
»»
»»
»»
»»
Built-to-Order Platform
NH30 – Rugged 4U, 40 HP Modular Managed Gigabit Ethernet
Switch
»»
»»
»»
»»
»»
»»
»»
»»
»»
Application-Ready / Turnkey Systems
for CompactPCI / Serial
DO-160G Multipurpose
Airborne Device
MP70S – ARINC 600 Aircraft
Network Server
18
»»
»»
»»
»»
»»
»»
»»
»»
»»
ARINC 600, 4MCU Housing with status display
Intel Core i7, quad-core 64-bit processor
16-port managed Gigabit Ethernet Switch
CompactPCI Serial Technology
2 rugged hot-plug HDD/SSD shuttles with locking support
2 antenna interfaces for WiFi and/or 3G/4G cellular interfaces
2 USB 3.0 interfaces for fast data loading
Multipurpose OLED graphic display
Display port, USB 3.0, GB Ethernet and 2 SIM card slots accessible
via the front flap
»» Qualified according to DO-160G
Compact 40 HP turn-key system
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling
Intel Core i7 or Celeron, TPM optional
Up to 16 GB DDR3 DRAM soldered, ECC
Up to 20 TB storage capacity (depending on RAID level and HDD sizes)
Up to 5 hot-swappable HDD/SSD carriers in different RAID configurations
Single or redundant power supplies or uninterruptible power supply (AC or DC)
Optional PCI Express Mini Card slots for WLAN, GSM (2G), UMTS (3G), LTE (4G),
GPS or GLONASS functionality
»» Optional PoE PSE capable 4-port switch
»» Compliant to EN 50155 (railways)
Compact 4U, 40 HP turn-key Layer 2/3 switch solution
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling
Single or redundant power supplies or uninterruptible power supply (AC or DC)
Up to six slots for RJ45, M12 (A or X-Coded) or SFP line cards
PoE+ / non-PoE power sourcing Ethernet ports in mixed configuration
Switch firmware production-ready installed
System supervision (temperature, fan, power supply) optional
EN 50155 class TX compliant (railways)
19
3U CompactPCI / PlusIO CPU Boards
Intel Processors
20
Type
CPU
Performance
Scalability
Compact-PCI /
PlusIO
Memory max.
Interfaces
Intel Technology
Local Extensions
Software
F75P
Safe SBC with
onboard dual
redundancy
(see also
compare chart
safe computers)
3 × Intel Atom E6xx
(two Control Proc-essors, one I/O Processor)
Low end:
0.6 GHz, 3.3 W typ.
High end:
1.6 GHz, 4.5 W typ.
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
2 GB + 2 ×1 GB DDR2
DRAM (soldered),
mSATA disk, 8 KB
non-volatile FRAM
Standard front I/O:
VGA, 2 Fast Ethernet, 2 USB 2.0
Standard rear I/O:
1 PCIe, 4 USB, 1 SATA, 2 Fast
Ethernet
Functions like Hyperthreading disabled for
deterministic behavior
F23P
SBC
Intel Core i7,
up to i7-4700EQ,
4th generation,
(64-bit CPU)
Low end:
1.5 GHz, 25 W typ.
High end:
4 GHz, 47 W typ.
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
16 GB DDR3 DRAM
(soldered), mSATA
disk, microSD card
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb
Ethernet
Other I/O (onboard, side card):
SATA, HD audio, USB, UART etc.
Hyperthreading, VT,
AMT, Turbo Boost
I/O extension cards:
F6xx
Windows,
Linux
F22P
SBC
Intel Core i7,
up to i7-3615QE,
3rd generation,
(64-bit CPU)
Low end:
1.5 GHz, 17 W typ.
High end:
2.3 GHz, 45 W typ.
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
16 GB DDR3 DRAM
(soldered), mSATA
disk, microSD card
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb
Ethernet
Other I/O (onboard, side card):
SATA, SDVO, HD audio, USB,
UART etc.
Hyperthreading, VT,
AMT, Turbo Boost
see compare chart 3U
CompactPCI / PlusIO
extension cards
Windows,
Linux
F21P
SBC
Intel Core i7,
up to i7-2715QE,
2nd generation,
(64-bit CPU)
Low end:
1.1 GHz, 17 W typ.
High end:
2.1 GHz, 45 W typ.
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
16 GB DDR3 DRAM
(soldered), mSATA
disk, microSD card
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb
Ethernet
Other I/O (onboard, side card):
SATA, SDVO, HD audio, USB,
UART etc.
Hyperthreading, VT,
AMT, Turbo Boost
I/O extension cards:
F6xx
Windows,
Linux
F19P
SBC
Intel Core 2 Duo
up to SP9300
(64-bit CPU)
Low end:
1.2 GHz, 5.5 W typ.
High end:
2.26 GHz, 25 W typ.
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
4 GB DDR3 DRAM
(soldered), CompactFlash, microSD card
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb
Ethernet
Other I/O (onboard, side card):
SATA, SDVO, HD audio, USB,
UART etc.
VT
see compare chart 3U
CompactPCI / PlusIO
extension cards
Windows,
Linux
QNX, Linux,
VxWorks,
VxWorks/
Cert, PikeOS
21
F11S
SBC
Intel Atom
up to Z530P
Low end:
1.1 GHz, tbd W typ.
High end:
1.6 GHz, 2 W typ.
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI slot
2 GB DDR2 DRAM, 2
MB SRAM, CompactFlash, microSD card
Standard front I/O:
VGA, 1 Gb Ethernet, 1 Fast Ethernet, 2 USB 2.0, 1 COM, 1 PS/2
Other I/O:
1 UART, FPGA (Altera Arria or
Altera Cyclone) for user-defined
I/O functions
I/O extension cards:
F6xx
Windows,
Linux
PowerPC Processors
22
Type
CPU
Performance
Scalability
Compact-PCI /
PlusIO
Memory max.
Interfaces
Software
F50P
SBC
PowerPC up to
MPC8548
Low end:
800 MHz, tbd W typ.
High end:
1.5 GHz, tbd W typ.
32-bit/33-MHz CompactPCI
system slot,
1 CompactPCI slot PICMG 2.0 or
PICMG 2.30
2 GB (ECC) DDR2
SDRAM, 128 KB
FRAM, 2 MB SRAM,
16 GB SSD Flash
Standard front I/O:
2 Gb Ethernet, 2 USB 2.0
Rear I/O:
up to 3 Gb Ethernet, 4 USB 2.0, up to 2 SATA, up to 64 userdefined I/O lines
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
Linux,
VxWorks,
INTEGRITY
F50C
SBC in CCA
frame for
conduction
cooling
PowerPC up to
MPC8548
Low end:
800 MHz, tbd W typ.
High end:
1.5 GHz, tbd W typ.
32-bit/33-MHz CompactPCI
system slot,
1 CompactPCI slot
2 GB (ECC) DDR2
SDRAM, 128 KB
FRAM, 2 MB SRAM,
16 GB SSD Flash
Standard front I/O:
1 USB
Rear I/O:
3 Gb Ethernet, 4 USB 2.0,
2 SATA, up to 64 user-defined I/O lines
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
Linux,
VxWorks,
INTEGRITY
F206N
Slave SBC
Nios Soft Core
33 MHz, tbd W typ.
32-bit/33..66-MHz 1
CompactPCI slot
32 MB SDRAM,
2 MB Flash
Front I/O:
1 debug interface
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
Nios sample
designs,
development
package,
update tools
F218
Slave CPU Board
PowerPC MPC8314
266 MHz, tbd W typ.
32-bit/33-MHz CompactPCI
peripheral slot,
1 CompactPCI slot
256 MB DDR2 DRAM,
16 MB Flash
Standard front I/O:
2 Gb Ethernet, 1 COM
Rear I/O:
80 GPIO lines
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
Linux,
VxWorks
23
3U CompactPCI / PlusIO Peripheral Boards
Type
24
CPU
CompactPCI / PlusIO
Memory max.
Interfaces
Software
F100
CompactPCI to CompactPCI
Serial Interface (with G100)
32-bit/66-MHz CompactPCI
system slot, 1 CompactPCI
slot
Front I/O:
1 PCI Express x1
Driver software not necessary
F204
M-Module Carrier
1 CompactPCI slot
Onboard:
1 M-Module slot
M-Module driver software
F205
M-Module Carrier
1 CompactPCI slot
Onboard:
2 M-Module slots
M-Module driver software
F206
Octal UART (16450)
Nios Soft Core optional
32-bit/33..66-MHz 1
CompactPCI slot, 3.3V VIO
2 MB Flash, 16 MB DRAM
Standard configuration:
8 × UARTs for use with SA-Adapters
(RS232/422/485, isolated or not)
Other I/O:
FPGA (Altera Arria or Altera Cyclone)
for user-defined I/O functions
Linux, VxWorks, Windows, QNX
F206N
Slave SBC
Nios Soft Core
32-bit/33..66-MHz 1
CompactPCI slot
32 MB SDRAM, 2 MB Flash
Front I/O:
1 debug interface
Other I/O:
FPGA (Altera Arria or Altera Cyclone)
for user-defined I/O functions
Nios sample designs, development
package, update tools
F207
PCI-104 Carrier
32-bit/33-MHz
1 CompactPCI slot (8 HP
front panel) with one PCI-104
module
Onboard:
Up to 4 PCI-104 modules
PCI-104 driver software
F211
Fast Ethernet Interface
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
4 full/half-duplex 10BASE-T or 100BASE-TX Ethernet
Windows, Linux, VxWorks, QNX
25
26
F212
PMC Carrier
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
4 Reverse SMA antenna connectors
Depending on PMC card / PCI mini card
F213
PMC Carrier
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
2 SMA for wireless applications
Onboard I/O:
One 32-bit/33-MHz or 66-MHz PMC or
PCI mini card, type III (A and B)
Depending on PMC card / PCI mini card
F215
Universal Interface Board
Standard configuration:
2 × CAN, 2 × UARTs, 1 × 8-bit GPIO for use
with SA-Adapters
Other I/O:
FPGA (Altera Arria or Altera Cy-clone)
for user-defined I/O functions
Linux, VxWorks, Windows, QNX
F216
Octal UART (16550)
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
8 × RS232/422/485, hardwareconfigurable
Windows, Linux, VxWorks, QNX
F217
Memory Card Carrier
32-bit/33-MHz CompactPCI
peripheral slot, 1 CompactPCI
slot
F223
PCI Express Mini Card Carrier
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
Up to 6 SMA for wireless applications
(GPS, GSM, WLAN, UMTS, HSDPA)
Onboard I/O:
2 PCI Express Mini Card slots, 2 SIM card
slots (expandable up to 18 slots total)
Windows, Linux
F305
Fast Ethernet / Real-Time
Ethernet Interface
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
4 full/half-duplex 10BASE-T or
100BASE-TX Ethernet on M12
Rear I/O (option):
2 RT Ethernet channels,
MTCS connection
Windows, Linux, QNX
F403
Binary I/O Card for Railways
32-bit/33-MHz
1 CompactPCI slot
Front I/O:
16 binary inputs/outputs via 4 spring
cage terminal blocks
Driver support for all operating
ystems
Nios Soft Core optional
32-bit/33-MHz
1 CompactPCI slot
2 MB Flash, 16 MB DRAM optional
CompactFlash, Memory Stick, SD/SDHC
(Secure Digital 2.0), MMC plus)
Windows, Linux
27
28
F701
MVB Interface Card (Multifunction Vehicle Bus)
Duagon
32-bit/33-MHz
1 CompactPCI slot
F750
CANopen Interface Board
Hilscher netX 100
32-bit/33-MHz
1 CompactPCI slot
F751
DeviceNet Interface Board
Hilscher netX 100
F752
Real-Time Ethernet Interface
Board
F753
PROFIBUS Interface Board
Front I/O:
2 D-Sub 9-pin interfaces for
MVB connection
Windows, Linux
8 MB SDRAM, 4 MB serial Flash
Front I/O:
1 CANopen Interface, 1 diagnostic
interface
Windows, Windows CE, Linux,
VxWorks, QNX
32-bit/33-MHz
1 CompactPCI slot
8 MB SDRAM, 4 MB serial Flash
Front I/O:
1 DeviceNet interface, 1 diagnostic
interface
Windows, Windows CE, Linux,
VxWorks, QNX
Hilscher netX 100
32-bit/33-MHz
1 CompactPCI slot
8 MB SDRAM, 4 MB serial Flash
Front I/O:
2 10BASE-T or 100BASE-TX Ethernet, 1
diagnostic interface
Windows, Windows CE, Linux,
VxWorks, QNX
Hilscher netX 100
32-bit/33-MHz
1 CompactPCI slot
8 MB SDRAM, 4 MB serial Flash
Front I/O:
1 PROFIBUS interface, 1 diagnostic
interface
Windows, Windows CE, Linux,
VxWorks, QNX
29
3U CompactPCI Serial CPU Boards
30
Type
CPU
Performance
Scalability
CompactPCI Serial Slots
Memory max.
Interfaces
Software
G25A
SBC
Intel Xeon D-1500, up to 16
cores
Low end:
2 cores, 19 W typ.
High end:
16 cores, 45 W typ.
CompactPCI Serial system
slot or CompactPCI Serial
peripheral slot
32 GB DDR4 DRAM
(soldered), ECC, microSD card
Standard front I/O:
2 10 Gb Ethernet, 1 Gb Ethernet, 1
USB 3.0
Standard rear I/O:
28 PCIe, 2 USB 3.0, 6 SATA, 4 Gb
Ethernet
Windows, Linux
G23
SBC
Intel Core i7, up to i74700EQ, 2.4 GHz (64-bit
CPU), Intel technology:
Hyperthreading, VT, AMT,
Turbo Boost
Low end:
1.5 GHz, 25 W typ.
High end:
2.4 GHz, 47 W typ.
CompactPCI Serial system
slot or CompactPCI Serial
peripheral slot
16 GB DDR3 DRAM
(soldered), microSD card
Standard front I/O:
2 DisplayPort, 2 Gb Ethernet,
2 USBn3.0
Standard rear I/O:
5 PCIe x1, 2 PEG x8, 8 USB 2.0,
2 USB 3.0, 6 SATA, 1 DisplayPort
Optional rear I/O (mezzanine card):
up to 8 Gigabit Ethernet
Windows, Linux
G22
SBC
Intel Core i7, up to i7-3615QE,
2.3 GHz (64-bit CPU), Intel
technology:
Hyperthreading, VT, AMT,
Turbo Boost
Low end:
1.5 GHz, 17 W typ.
High end:
2.3 GHz, 45 W typ.
CompactPCI Serial system
slot or CompactPCI Serial
peripheral slot
8 GB DDR3 DRAM
(soldered), microSD card
Standard front I/O:
2 DisplayPort, 2 Gb Ethernet,
2 USB 2.0
Standard rear I/O:
5 PCIe x1, 2 PEG x8, 4 USB 3.0,
4 USB 2.0, 6 SATA, 1 DisplayPort
Optional rear I/O (mezzanine card):
up to 8 Gigabit Ethernet
Windows, Linux
G20
SBC
Intel Core i7, up to i7-610E,
2.53 GHz (64-bit CPU), Intel
technology:
Hyperthreading, VT, AMT,
Turbo Boost
Low end:
1.06 GHz, 18 W typ.
High end:
2.53 GHz, 35 W typ.
CompactPCI Serial
system slot
4 GB DDR3 DRAM
(soldered), CompactFlash,
microSD card
Standard front I/O:
2 DisplayPort, 2 Gb Ethernet,
2 USB 2.0
Standard rear I/O:
5 PCIe x1, 2 PEG x8, 4 USB 3.0,
4 USB 2.0, 6 SATA, 1 DisplayPort
Optional rear I/O (mezzanine card):
up to 8 Gigabit Ethernet
Windows, Linux
G52A
SBC
Freescale QorIQ T4240,
12 cores
1.5 to 1.8 GHz
CompactPCI Serial system
slot or CompactPCI Serial
peripheral slot
12 GB DDR3 DRAM
(soldered), microSD card
Standard front I/O:
2 10 Gb Ethernet, 1 Gb Ehternet,
1 USB 2.0, 1 RS232 configuration
port (USB 2.0)
Standard rear I/O:
3 Gb Ethernet, 1 USB 2.0, 2 SATA,
1 PCIe x2, 3 PCIe x4
Linux
G51
SBC
Freescale QorIQ P3041
quad-core, with or without
encryption
1.2 GHz, 1.33 GHz or 1.5 GHz
CompactPCI Serial system
slot or CompactPCI Serial
peripheral slot
8 GB DDR3 DRAM (soldered),
FRAM, microSD card, mSATA
slot, eMMC card
Standard front I/O:
3 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 Gb Ethernet, 6 USB 2.0,
2 SATA, SGPIO, 2 PCIe x2,
1 PCIe x4
Optional rear I/O (mezzanine card):
7 USB 2.0
Linux
31
3U CompactPCI Serial System & Peripheral Slot Boards
Type
GX1
CPU
Performance
Scalability
CompactPCI Serial Slots
Memory max.
Interfaces
Software
PCI Express 3.0 Switch
1 CompactPCI Serial
peripheral slot
Rear I/O:
16 ports, 64 PCI Express lanes
Third party from chip
manufacturer
G101
Gigabit Ethernet Switch
1 CompactPCI Serial
peripheral slot
Standard front I/O:
RJ45, M12 or SFP
Management firmware
GE1
Gigabit Ethernet Line Card
1 CompactPCI Serial
peripheral slot
Standard front I/O:
Four 1000BASE-TX Ethernet on
RJ45 or M12 connectors
Optional PoE
Driver software not
necessary
GP1
Gigabit Ethernet Line Card
1 CompactPCI Serial
peripheral slot
Standard front I/O:
Four 1000BASE-TX Ethernet on
RJ45 or M12 connectors
Optional PoE
GP2
Gigabit SFP PHY Line Card
1 CompactPCI Serial
peripheral slot
Standard front I/O:
Four 1000BASE-SX/LX/ZX
on SFP slots
G302
Managed Ethernet Switch
Available soon
32
Freescale PowerPC MPC8314
CompactPCI Serial
system or peripheral slot
32 MB Flash,
512 MB SDRAM
Standard front I/O:
3 × 1000BASE-T Ethernet
Rear I/O:
up to 13 × 1000BASE-T Ethernet
Driver software not
necessary
33
3U CompactPCI Serial Peripheral Boards
Type
34
CPU
Performance
Scalability
CompactPCI Serial Slots
Memory max.
Interfaces
Software
G100
CompactPCI Serial to
CompactPCI Interface
(with F100)
CompactPCI Serial
peripheral slot
Standard front I/O:
1 PCI Express x1
Driver software not
necessary
G201
USB 3.0 Interface
CompactPCI Serial
peripheral slot
Standard front I/O:
4 USB 3.0 interfaces
Windows, Linux
G204
M-Module Carrier
CompactPCI Serial
peripheral slot
Standard front I/O:
1 M-Module slot
M-Module driver
software
G211
Gigabit Ethernet Interface
CompactPCI Serial
peripheral slot
Standard front I/O:
4 full/half-duplex
1000BASE-T Ethernet on RJ45 or
M12 connectors
Windows, Linux
G211F
Quad Fiber Optics Interface
CompactPCI Serial
peripheral slot
Standard front I/O:
4 optical transceiver channels
1000BASE-SX
Windows, Linux
G212
PCI Express MiniCard Carrier
CompactPCI Serial
peripheral slot
Standard front I/O:
Express Card 34 or Express Card 54
slots via 4 SMA for HF applications
(GPS, GSM, WLAN, UMTS, HSDPA)
Onboard I/O:
Up to 2 PCI Express MiniCards
Depending on PCIe
MiniCard/ Express
Card
G213
XMC/PMC Carrier
CompactPCI Serial
peripheral slot
Onboard I/O:
1 XMC slot (2 links x4), or 1 PMC slot
(32-bit, 64-bit, PCI-X up to 133MHz)
Depending on XMC/
PMC card
G214
Multi-Display Controller
Standard front I/O:
4 DisplayPort 1.2 interfaces (+ 2
DisplayPort 1.1 interfaces op-tional
via sideboard connector)
Windows
GPU: AMD E6760
CompactPCI Serial
peripheral slot
1 GB integrated graphics RAM
35
36
G215
Universal Interface Board
G301
Unmanaged Ethernet Switch
G303
Standard configuration:
2 × CAN, 2 × UARTs, 1 × 8-bit GPIO for
use with SA-Adapters (customizable
via onboard FPGA)
Linux
CompactPCI Serial
peripheral slot
Standard front I/O:
4 × 1000BASE-T Ethernet
Optional rear I/O:
1 × 1000BASE-T Ethernet (J6)
Linux, VxWorks,
Windows, QNX
Unmanaged Ethernet Switch
CompactPCI Serial
system or peripheral slot
Standard front I/O:
3 ×1000BASE-T Ethernet
Rear I/O:
up to 13 ×1000BASE-T Ethernet
Management Firmware
G304
Unmanaged Ethernet Switch
CompactPCI Serial
system or peripheral slot
Front I/O:
4 Gb Ethernet on RJ45
(M12 optional) Power over Ethernet
(PoE+) PSE (all ports)
Rear I/O:
1 Gb Ethernet (optional)
G501
HDD/SSD Shuttle
1 CompactPCI Serial
peripheral slot
Onboard I/O:
1 ×2.5” SATA HDD or SSD
Driver software not
necessary
G503
HDD/SSD Shuttle and RAID
Controller
1 CompactPCI Serial
peripheral slot
Onboard I/O:
2 ×2.5” SATA HDD or SSD
Driver software not
necessary
Nios Soft Core optional
CompactPCI Serial
peripheral slot
4 MB Flash,
Up to 64 MB DRAM
37
3U CompactPCI / PlusIO Extension Boards
Type
CompactPCI / PlusIO
Interfaces
Local Extensions
Software
CT12
Transition Module Rear I/O
F11S, F19P, F21P, F50P, F75P
Connected to CompactPCI for transition
of rear I/O signals
2 Gb Ethernet, 4 USB 2.0, 4 PCIe x1, 4
SATA *
F600
Side Card Legacy I/O
F14..F21P
4 HP, connected to CompactPCI for
power supply
1..4 UARTs via SA-Adapters
(RS232/422/485, isolated/not isolated)
2.5" SATA drive
Windows, Linux, VxWorks, QNX
F601
Side Card Multimedia
F14..F21P
4HP, 1 CompactPCI Express slot with 4
x1 PCIe links
1..2 DVI, 1 audio, 0..1 COM via
SA-Adapter (RS232/422/485, isolated/
not isolated)
2.5" SATA drive
Windows, Linux, VxWorks, QNX
F602
Side Card CompactPCI Express F14..F18
4 HP, connected to CompactPCI for
power supply
4 PCI Express links x1, 1 USB, 1 DVI, 1
COM via SA-Adapter (RS232/422/485,
isolated/not isolated)
2.5" SATA drive
Windows
F603
Side Card USB/COM
F14..F21P
4 HP, connected to CompactPCI for
power supply
2 USB 2.0, 1 COM
2.5" SATA drive
Windows, Linux, VxWorks, QNX
F605
Side Card PMC/XMC
F15..F19P
4 HP or 8 HP, connected to CompactPCI
for power supply
1 PMC or 1 XMC slot
2.5" SATA drive
Depending on PMC/XMC
F606
Side Card Gb Ethernet
F14..F21P
4 HP or 8 HP, connected to CompactPCI
for power supply
2 Gb Ethernet with Lemo connectors,
1 COM (option 2) via SA-Adaper
(RS232/422/485, isolated/not isolated)
2.5" SATA drive
Depending on SBC
Depending on SBC
*Only one SATA port can be used on the CT12 when combined with the CPU board F11S
For more information on the interoperability of the side cards with the respective CPU boards
please see the Extension Card Compatibility Matrix.
38
39
6U CompactPCI Boards
40
Type
CPU
CompactPCI
Memory max.
Interfaces
Local extensions
Software
D602
Safe SBC with onboard triple
redundancy, conduction
cooling on re-quest
(see also Safe Computers
Compare Chart)
3 × redundant PowerPC 750
CL, 1 GHz
32-bit/33-MHz CompactPCI
system slot, 1 CompactPCI
slot
3 × redundant 512 MB DDR
SDRAM, 2 × redundant 256
MB ECC Flash, 1 MB ECC
FRAM
Standard rear I/O:
6 UARTs, 1 RS232, I2C
2 standard PMC slots (with
front I/O, board revisions -02
and later also with rear I/O),
second slot on rear I/O only
for AFDX
VxWorks, VxWorks/Cert,
PikeOS
D203
M-Module carrier
1 CompactPCI slot
4 M-Module slots
M-Module driver software
D202
PC-MIP carrier
1 CompactPCI slot
6 PC-MIP slots
PC-MIP driver software
41
Our Built-to-Order Concept
Due to the built-to-order concept and a high stockpiling of all components,
the delivery time can be drastically reduced. Within a short time, customers
receive their close-to-series prototypes and can immediately start developing their application. Based on standard versions, there are many various
configuration options.
MH70I - Rugged 4U, 40 HP Modular Industrial PC
With MEN’s built-to-order configurator, ordering an individually configured Ethernet Switch
is as easy as pie. By choosing a basic unit with preconfigured functionality you can add
all your necessary accessories from a range of components with compatible software and
functionality.
Pre-selected functions indicate that they are required by your system. Article numbers
are assigned depending on your drop-down selections, and a 100% identifiable product key
is generated. After that you can order the systems with your individual product key.
This process is suitable for small quantities and fast evaluation. For volume quotes higher
than 25 systems please contact MEN sales directly.
Please find the several configurators on our website:
www.men.de » Products » CompactPCI / Serial » Downloads & Media
42
43
Our Custom Design Service
It is MEN’s goal to find a tailored solution for the application together with our
customers. While using as many standard COTS components as possible, parts
of the solution may include customization:
COTS and Custom Design Expertise
» System level
Whether standard or custom, MEN products benefit
from our unique development expertise:
» Board level
» Component level (in FPGA)
The Design Process
Custom design at MEN follows a defined development process
from specification to design, verification and validation of a
product, which is part of our quality management system
according to DIN EN ISO 9001, EN/AS 9100 and IRIS.
»Robust designs for harsh environments
»Safety-critical designs in accordance with
IEC 61508, EN 50126, EN 50128, EN 50129, DO-245,
DO-178B, DO-254
»Based on Intel, AMD, PowerPC and ARM architectures
»Based on more than 50 proprietary cores in FPGA
» Completed by real-world I/O
» Supported by real-time software
The design process follows an adapted V-Model, depending
on SIL level, and includes requirement tracing.
RAMS (Reliability, Availability, Maintainability and Safety)
procedures are applied in the planning phase to avoid costly
mistakes down the road.
Requirements
Analysis
Acceptance
Test Design
System
Design
Acceptance
Testing
System
Test Design
Architecture
Design
Module
Design
Integration
Test Design
Unit
Test Design
System
Testing
Integration
Testing
Unit
Testing
Design / Coding
44
45
Application Examples
Why MEN?
Development and production of rugged and reliable products
Our boards and systems are developed to meet requirements such as temperature ranges between
−40°C and +85°C through convection or conduction cooling, shock, vibration, chemical influence or the option
of coating against humidity right from the start.
Shipboard Command Desk
Command desks on ships use computer systems to control and monitor
the engines and electric propulsion, electrical and hydraulic systems,
navigation, communication and integrated platform management systems.
These computers are based on modular 40 HP systems like 3U CompactPCI
using standard COTS components. A single board computer inside the
CompactPCI system is based on Intel Core 2 Duo architecture with two
64-bit processors and state-of-the-art PC interfaces like Ethernet and USB.
Development based on quality management systems of our markets
We are certified according to ISO 9001 and ISO 14001, plus EN/AS 9100 (aerospace) and IRIS (railways)
and provide systems according to ISO 7637-2 (road traffic) requirements. We develop according to the GRESS
requirements by Airbus and are preparing for EFQM (European Foundation for Quality Management).
Development based on relevant standards know-how for our markets
Preparing products for environmental qualification according to vertical market standards is one of our
key services, for example EN 50155 (railways), DO-160G (airborne), German Lloyd (ships) or ISO 7637-2
(automotive E-Mark).
WLAN Server for Company Buses
Fully automated, high-quality in-house production
A CompactPCI WLAN server supplies employees during their commute
with passenger internet, local portals and passenger information services.
The complete Wi-Fi based entertainment solution uses carrier cards for two
PCIe Mini Cards and up to 18 SIM cards on one board. In case the data volume
of one SIM card is depleted, an easy change to the next SIM card is possible.
The CompactPCI rack comes with a customized backplane and beside the SIM
cards includes several GSM, GPS and UART interface cards. The system is
controlled by an CompactPCI PlusIO SBC with an Intel Celeron M CPU.
All relevant environmental tests in-house
To achieve the highest product quality, our manufacturing and test process is fully automated. Vaporphase soldering assures smooth processing of the components. Traceability is guaranteed by time stamps
throughout the whole process.
We carry out the preliminary qualifications in our own environmental test lab (temperature, shock,
vibration, humidity), high-voltage and EMC chambers. Further calculations and analyses include MTBF,
FMEA, Hazard Tree, HASS or HALT.
FPGA technology expertise
FPGAs allow us to customize our hardware without touching the board layout while keeping costs low,
even in small quantities. FPGA-based solutions are flexible, offer long-term availability and support extended
temperature operation.
Passenger Information Systems
Infotainment solutions give passengers orientation regarding stops,
schedules and routes, hints for changing trains, short-term changes of the
route or delays. They also provide entertainment, for instance by displaying
news of the day and the weather forecast or by playing movies and music.
Content servers are used to store those data and programs. They connect
to the screens in the vehicle via wired LAN or WLAN. Apart from displaying
pictures, text and audio data, these systems can also control TV or radio
programs. Content servers connect to the outside world, e.g. the depot,
to receive up-to-date information while travelling.
Modular 40 HP systems like 3U CompactPCI or CompactPCI Serial are
ideal for this type of application because they are flexible with regard to
the board and feature combination and they are maintenance-friendly,
e.g., offering hot-plug functionality. In combination with content servers,
intelligent display computers are increasingly used to show the content.
46
Custom design of computer boards and systems
Often the most cost-effective solution results in a custom design – while using as many standard components
as possible. Synergy effects emerge through the mutual development of standard and custom boards and
systems, completed by the built-to-order approach of MEN’s box PCs and 19"-based application-ready and
turnkey systems.
Complete system solutions based on in-house mechanical design
Whether a 19" system, wall-mount, standalone or DIN-rail is needed, we guarantee overall operability of
each system, minimizing the integration effort and the handling cost on the customer’s side. The quality of
our systems is assured by applying traceability through the V-model.
Customer assistance in configuration of mission-critical systems
Computer architectures with safety-critical requirements are very complex. Considerations include safetycritical characteristics and levels (SIL, DAL), reliability questions, error behavior modes and the major IEC and
EN standards – backed by a professional safety and risk management.
47
www.men.de
www.men-france.fr
www.menmicro.com
www.men-china.cn

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project