OWNER’S GUIDE
2-WAY LCD EXTENDED RANGE REMOTE STARTER
For Automatic & Manual Transmission Vehicles www.TitanInnovations.ca
2
TABLE OF CONTENTS
About Us / Thank you
Important Safety Notes
Titan-Secure
Valet “Service” Mode
Button Functions (Basic)
Button Functions (Advanced)
Basic Features:
Lock
Panic
Unlock
Trunk Release
Start
Idle Mode
Turbo Timer
Text Start
Advanced Features:
Silent Arm/Disarm
Cold Timer Mode
Auxiliary Output #1
Auxiliary Output #2
Long Lock Output
Manual Transmission:
Diagnostics
Transmitter Learning
Battery Replacement
Warranty
FCC Notice
9
9
9
10
8
8
8
8
7
7
8
8
3
4
5
6
11
12
13
14
10
10
10
11
14
15
16
Titan Data Series TS152RC Owner’s Guide
ABOUT US
Titan Innovations Ltd is a Canadian company dedicated to quality, service, and integrity.
Titan products are designed by Canadians for Canadian climates. Titan products are guaranteed to be built to the highest specifications using only quality components that have been tested extensively under extreme conditions. This ensures that the customer is receiving only the most reliable and innovative product available.
THANK YOU
Thank you for your purchase of this product. Any product designed and manufactured by
Titan Innovations is guaranteed to provide you years of trouble-free service. Your Titan
Remote Starter or Remote Starter / Security System has been developed for your peace of mind and safety. It has been designed to provide you with the latest in technology, combined with ease of use.
Titan Data Series TS152RC Owner’s Guide 3
IMPORTANT SAFETY NOTES!
CARBON MONOXIDE POISONING:
The owner/user MUST INSTALL a CARBON MONOXIDE DETECTOR in the living area near to where the vehicle is being stored or parked. It is the sole responsibility of the owner/user to keep the remote transmitters away from the reach of children and handle with care so that the system does not unintentionally start. When the vehicle is parked in an enclosed/partially enclosed area (for example: a garage or car port), being serviced, or if the vehicle is loaned to an operator not familiar with a remote starter, the system MUST BE placed in Service(Valet) Mode.
NEVER OPERATE THE SYSTEM IN AN ENCLOSED
OR PARTIALLY ENCLOSED AREA!
HYBRID REMOTE STARTERS FOR
AUTOMATIC & MANUAL TRANSMISSION STARTERS:
The installation of a remote starter MUST BE DONE ONLY with a specified remote starter. Hybrid
Remote Starters have both an automatic transmission and manual transmission mode. It is the responsibility of the vehicle’s operator to insure that:
• when the remote starter is in use with a vehicle equipped with a manual transmission, the transmission remain in NEUTRAL POSITION ONLY.
• when the remote starter is in use with a vehicle equipped with an automatic transmission, the transmission remain in the PARK POSITION ONLY.
It is the sole responsibility of the operator of the vehicle to insure the transmission positions described herein are maintained at any time the remote starter is in use. In no case shall the manufacturer or Titan be liable for any damages of any kind whatsoever including but without limited to damages for personal injury or loss of life arising by virtue of a remote starter being used when the transmission of the vehicle in question is not set as mandated herein.
TITAN SECURE
“Titan-Secure” is a security feature that is built-in to every Titan Data Series remote starter. Activating this feature will require some extra installation and/or parts. You can also add a siren and starter disable to your system. This will give you the added security of an OEM style “Content Security” system in your vehicle and will provide you with protection of your personal items in your vehicle much like the factory content security systems in use on many vehicles today. Once installed, it will provide you with door-pin and hood-pin coverage and also monitor your ignition. Once armed, if your doors or hood are opened, or if someone is attempting to hot-wire your vehicle, your horn or siren will sound. If you purchased a 2-Way Remote Starter system, it will also page to your transmitter. It is as easy to use as locking and unlocking your doors. No shock sensor false alarms; no other hassles; no other worries. “Titan-Secure” is that easy! Consult your Titan Dealer for more information on “Titan-Secure”.
4 Titan Data Series TS152RC Owner’s Guide
VALET OR SERVICE MODE
Valet or “Service” Mode will disable the remote start and/or Titan-Secure features of the system. The optional Lock, Unlock and Trunk Release features will still be operational. When the vehicle is to have any “under hood” or service work done, the system must be placed into Service Mode. This feature may also be used if a transmitter is lost, damaged, or if the system malfunctions.
ATTENTION:
TO AVOID SERIOUS INJURY, this remote start system must be set into Service Mode before any under hood servicing is started. Service Mode will prevent the vehicle from starting while the vehicle is being serviced. It is the sole responsibility of the vehicle’s owner to place the system into Service
Mode. The manufacturer accepts no responsibility for accidental starting of the vehicle while the vehicle is being serviced.
IGNITION ON 5 Seconds
ENTERING SERVICE MODE:
Turn the ignition key to the On position.
Press and hold the Program Button (located on the antenna - center of windshield) for 5 seconds or until the horn/siren (optional) honks five times.
Note: The LEDs on the antenna will turn on solid to confirm Service Mode. If the Start button is pressed when the vehicle is in service mode, the park lights will flash slowly 3 times and the vehicle will not start.
EXITING SERVICE MODE:
1. Turn the ignition key to the On position.
2. Press and hold the Program Button (located on the antenna - center of windshield) for 5 seconds or until the horn/siren (optional) honks two times.
Note: The LEDs on the antenna will turn off and the remote starter/security functions will be reenabled.
Titan Data Series TS152RC Owner’s Guide 5
BUTTON FUNCTIONS
LOCK
START
STATUS
UNLOCK
FUNCTION
LOCK
START
UNLOCK
FUNCTION
T99RC T85SRC
ACTION
Press Lock Button Once
BASIC FUNCTIONS
FUNCTION
Locks Doors and Arms Titan-Secure
For Less Than 2 Seconds
Press Lock Button
For More Than 2 Seconds
Press Unlock Button
For Less Than 2 Seconds
(If installed)
Activates Panic Function
Horn/Siren will sound for 60 sec.
Unlocks Doors and Dis-Arms
Titan-Secure (if installed)
Press Unlock Button
For More Than 2 Seconds
Press Start Button Once
For Less Than 2 Seconds
Press Function Button Once
For Less Than 2 Seconds
Activates Trunk Release (if installed) (will also unlock doors)
Activates Remote Starter - Push Again to Shut
Off - Also does Idle Mode If Running With Key
Activates Turbo Timer Mode
(engine must be running)
6
ADVANCED FUNCTIONS
ACTION
Press Function Button Once Then Press
FUNCTION
Sets Remote Timer Start
& Hold Start For 3 Seconds
Press Function Button Once
Then Press Lock For Less Than 2 Seconds
Press & Hold Start Button
For More Than 2 Seconds
Press & Hold Function Button
For More Than 2 Seconds
Mode On/Off
Long Lock Function
(Can be set for 15/30 sec. or Latched)
Aux Function #1
Aux Function # 2
Titan Data Series TS152RC Owner’s Guide
TRANSMITTER LCD SCREEN
SENDING SIGNAL
LOCK/UNLOCK
SIGNAL SIGN
VALET MODE
SHOCK SENSOR
CAR HOOD
A M
P M
CLOCK
SIREN
ALARM CLOCK
VIBRATE REMINDER
TRUNK RELEASE
STARTED
KEY ON
DOOR OPEN
PARKING LIGHTS
TURBO
START
ARM
TIMER START
SHIFT
ICON
TRANSMITTER
BATTERY LIFE
EXPLANATION
Indicates if your car is locked or unlocked
Indicates that your horn/siren is turned ON when locking or unlocking your vehicle
Indicates that your transmitter is sending signals to the vehicle
Indicates that the shock sensor has been triggered
Indicates that the Alarm Clock mode in the transmitter is turned ON
Clock display with AM or PM notification
Indicates parking light flashes
Indicates that your ignition is ON
Indicates that your vehicle is ARMED
Indicates that Vibration mode is ON
Indicates that your vehicle has remote-started and/or is running
Indicates that your Trunk Release has been activated
Indicates that your hood is open
Displays battery life
Indicates your vehicles’ door(s) are open
Indicates Turbo mode is ON
Indicates “Function” transfer and setting mode
Indicates your vehicle is in Remote Start mode
Indicates Cold Timer mode is ON
Titan Data Series TS152RC Owner’s Guide 7
CHECKING VEHICLE STATUS
A Status check will tell you if your vehicle’s doors are locked or unlocked, or if the vehicle is running, and if so, approximately how much runtime is left.
To see vehicle status: Press and release the Status button. If the system is Locked (not running), the
LCD will display the Lock icon and beep 1 time. If the system is Unlocked (not running), the LCD will display the Unlock icon and beep 2 times. If the vehicle is running with remote starter, and you press the Status button, the LCD will display whether the vehicle is Locked or Unlocked and then indicate the run time that is left based on a percentage of the total programmed runtime as shown below:
T99 ICON DISPLAY
100
75
50
25
RUNTIME REMAINING
75-100%
75-50%
25-50%
0-25%
TRANSMITTER ALARM CLOCK
Alarm clock function (see Page ????): If the you use the ALARM CLOCK function in the transmitter, when the alarm time is reached, the transmitter will chirp for 30 seconds. During the alarm period press any button to stop it.
T99 TRANSMITTER PROGRAMMING
Press and hold the Start (*) and Function (#) buttons for 2 seconds. The T99 transmitter will enter
PROGRAM setting mode. The Clock, Alarm Clock and Vibrate icons will begin to flash.
Press the blue Status (S) button and the hour settin of the clock will flash. Use the Lock or Unlock buttons to adjust the hour setting up or down.
Press the S button to change to the minute setting. Set the minutes using the Lock and Unlock buttons, the same as you did for the hour setting.
After your Clock is correctly set, press S to change to the Alarm Clock setting. The Alarm Clock on the remote is just an alarm clock that you can use just like any regular alarm clock. It does not affect any operation of the remote starter. When the Alarm Clock is flashing, press Lock to turn the alarm clock ON and Unlock to turn if OFF. If you press Unlock, you will notice the alarm clock icon disappears. If you pressed Lock, the Alarm Clock icon stays in the display. Press S to set the Alarm
Clock time just like you did with the clock settings.
After setting the Alarm Clock, or if you pressed Unlock to turn the Alarm Clock off, press S to continue. The LED Backlight will start to flash. Press Lock if you want to have Backlighting ON when you use the transmitter or Unlock if you wish to turn the LED Backlight OFF.
After setting your Backlight preference, press S again and the Vibration icon will begin to flash.
Press Lock to turn on Vibrate mode ON and Unlock to turn Vibrate OFF. If Vibrate is turned ON, any
ALARM notifications to the remote will vibrate as well as beep.
Press S twice to exit programming. 5 seconds of inactivity during transmitter programming will also exit programming. Any changes made previous to exiting programming will automatically be saved.
8 Titan Data Series TS152RC Owner’s Guide
BASIC FEATURES
LOCK
Pressing the Lock button for less than two seconds will Lock your doors. Park lights will flash once and if your horn is hooked up or optional siren is installed, you will hear one honk/chirp. LEDs located on your antenna will flash slowly. If you have Titan-Secure enabled, locking the doors will also arm your security system. If starter disable is installed, it will also activate at this time. These features require extra install and/or parts. Consult your Titan dealer.
PANIC MODE
Pressing the Lock button for more than two seconds will activate Panic Mode. If your vehicles horn or a siren is connected to your system, it will honk your horn/siren for 60 seconds or until you push and hold the Lock button again.
UNLOCK
Pressing the Unlock button for less than two seconds will unlock your doors. Park lights will flash twice and if your horn is hooked up or optional siren is installed, you will hear two honks/chirps. LEDs located on your antenna will go out. If you have Titan-Secure enabled, unlocking the doors will also dis-arm your security system. If starter disable is installed it will also de-activate at this time.
TRUNK RELEASE
Pressing the Unlock button for more than two seconds will activate Trunk release. If you have this option installed, when activated, this function will first unlock the doors, disarm any security and then open your trunk. Your park lights will flash 3 times. This feature requires extra installation and/or parts. Contact your Titan Dealer for more information.
START
Pressing the Start button for less than two seconds will activate the “Remote Start” process.
If the horn/siren is hooked up, you will one horn honk and one park light flash, then the vehicle will start. The park lights then flash 5 times and stay on. The vehicle will run its programmed run time and shut down. When the vehicle shuts down, the park lights will flash twice and horn/siren will chirp twice. Run times are adjustable for preset times of 4, 15, 30, and 45 minutes. The default run time is 15 minutes. This run time can easily be adjusted by your Titan dealer. When the vehicle is running with the remote start, pressing the Start button again for less than two seconds will shut off the remote starter.
IDLE MODE
When the vehicle is running with the key, pressing the Start button will activate Idle Mode. Idle
Mode is useful for times where you may want to leave your vehicle running without leaving the keys in the ignition, such as popping into a convenience store. With the vehicle running with the keys in the ignition, and the transmission in Park, just press the Start button, making sure not to push on the brake. Your park lights will flash twice and horn/siren (optional) will chirp twice. You can remove your keys and the vehicle will stay running. You can exit the vehicle and use your remote to lock your doors. If you are away from your vehicle longer than your programmed remote starter run time, the vehicle will automatically shut down. Just make sure to shut your lights off if you had them on.
TURBO TIMER MODE
If your vehicle is equipped with a Turbo(s), it may be required to be cool down the Turbo(s) before shutting off the vehicle. Consult your owner’s manual or check with your dealer for more information. To activate Turbo Timer, with the vehicle running by key, ensure the transmission is in
Park. Make sure to keep your foot off the brake and press the Functionbutton once for less than 2 seconds, and the remote starter will take over. You can remove your keys, exit the vehicle, and lock your doors. The remote starter will keep the vehicle running for 2 minutes and then shut off by itself allowing your Turbo(s) to cool down.
Titan Data Series TS152RC Owner’s Guide 9
BASIC FEATURES cont’d
TEXT START
This unit is “TEXTSTART ® ” READY. This unit is fully compatible with Titan’s new SMS “Text
Messaging” systems. This new advanced technology allows you to control and monitor your vehicle from your cellular phone.
ADVANCED FEATURES
SILENT ARM/DISARM
If you have Titan-Secure Security features installed and enabled, you may want to silently Arm/Lock and Disarm/Unlock your vehicle. If so, press the Lock & Unlock buttons together for less than 2
seconds. This button combination is always a temporary function and will toggle Silent Arm/Lock and Silent Disarm/Unlock. If you push Lock or Unlock separately, your unit will function with normal honks/chirps again.
COLD TIMER MODE
Pressing the Start & Function button together for less than 2 seconds will activate or deactivate the Cold Timer Start function. This function is useful if you cannot plug in your vehicle in extremely cold weather. If this feature is turned on, the vehicle will start and run for the preset run time every
1, 2, 3, or 4 hours for a 24 hour period. To turn on the Cold Timer Start, push the Start & Function buttons together for less than 2 seconds. The park lights will come on. Once the park lights are on, you have five seconds to set the delay time between cold timer starts. Press the following buttons to set your delay for the following times:
Lock Button
Unlock Button
Start Button
Function
1 Hour
2 Hours
3 Hours
4 Hours
When you press one of these buttons the park lights will flash the corresponding number of flashes to confirm your setting. Your Cold Timer Start is now turned On.
To turn off Cold Timer start, just press the Start & Function buttons together again. The park lights will flash twice and horn/siren will chirp twice to confirm the feature is turned off. This feature will also turn off by turning on ignition with the vehicles key.
AUXILIARY OUTPUT #1
This output can be used to control auxiliary functions such as sliding doors or other functions requiring a momentary input. To activate this output, press the Start button for more than 2
seconds. On certain vehicles with sliding doors, there may be an Unlock pulse required opening a sliding door, so upon activation of this output, you may or may not have your doors unlock first. It just depends on how the installer configures your vehicle. These features require extra installation and/or parts. Consult your Titan dealer for more information.
AUXILIARY OUTPUT #2
This output is configured very similar to Auxiliary Output #1. To activate this output, press the
Function button for more than 2 seconds. This can be used for a second sliding door or other applications. These features require extra installation and/or parts. Consult your Titan dealer for more information.
10 Titan Data Series TS152RC Owner’s Guide
ADVANCED FEATURES Cont’d
LONG LOCK OUTPUT
This output gives you some versatility with your Lock functions. This output can be used as a
“latched” output or as a “timed” output for 15 or 30 seconds. If you have a vehicle that has factory installed “Window Rollup Features” that will roll up your windows if you hold the lock button or hold the key in the lock position in the door, you can use this function to roll up your windows with your
Titan remote. Consult your Titan dealer to see if your vehicle has this option. To activate this output, press the Lock & Function buttons together for less than 2 seconds. If you do not have power locks in your vehicle, this output can be used for a variety of special applications.
These features require extra installation and/or parts. Consult your Titan dealer for more information.
MANUAL TRANSMISSION READY MODE
To remote start the vehicle, you must first place the system in “Ready Mode”. There are 3 different programming options for doing this. To use a method other than the default setting, you must have your system re-programmed by an authorized dealer.
Default - Transmitter Activation
1. With the engine running & transmission in Neutral, apply the parking brake.
2. Press and release the Start button on the remote transmitter.
3. Turn off key and remove from the ignition (the vehicle will stay running).
4. Exit the vehicle and make sure all doors are closed.
5. Press the Start button on the transmitter to shut the vehicle off.
6. The vehicle is now in “Ready Mode” and can be started by remote.
Option 2 - Brake Pedal Activiation
1. With the engine running & transmission in Neutral, apply the parking brake.
2. Press and release the brake pedal 2 times (once if it was already on when you applied the park brake in step 1).
3. Turn off key and remove from the ignition (the vehicle will stay running).
4. Exit the vehicle, upon closing the last door, the vehicle will shut down.***
5. The vehicle is now in “Ready Mode” and can be started by remote.
Option 3 - Park Brake Activation
1. With the engine running & transmission in Neutral, apply the parking brake.
2. Turn off key and remove from the ignition (the vehicle will stay running).
3. Exit the vehicle, upon closing the last door, the vehicle will shut down.***
4. The vehicle is now in “Ready Mode” and can be started by remote.
REMOTE STARTING ALL MODES
1. With the engine off, press the Start button.
2. The park lights will flash and the horn will chirp once (if connected).
3. The vehicle’s ignition system will come on and within 3 seconds, the vehicle will start.
4. The parking lights will flash 5 times to confirm a successful start.
5. The vehicle will run for the programmed runtime (15 minutes default).
If the vehicle does not start, see the diagnostics section on Page 12 for possible solutions.
Titan Data Series TS152RC Owner’s Guide 11
MANUAL TRANSMISSION READY MODE cont’d
If you press the Start button on the transmitter while the door is open, the system will go into “Idle mode” and NOT shut down when you close the door. It will run for the programmed run time or until it is shut down by the remote. This feature is convenient if you need to open other doors after having closed yours.
IMPORTANT: If a door is opened while the vehicle is not running and in “Ready Mode”, the system will exit “Ready Mode” and will not remote start. You will need to start the vehicle with the key and repeat the procedure. If you need to open doors and want to avoid repeating the “Ready Mode” setup again, simply remote start the vehicle and open the door while the vehicle is running. When you are done, and the doors are closed, you can shut down the vehicle with the remote and “Ready
Mode” will still be engaged.
DIAGNOSTICS
If the remote starter does not activate when the Start button is pressed, the park lights will flash a diagnostic code to indicate what shutdown input has been triggered.
TRANSMITTER
ACTION
(LED in car antenna on solid)
Displays Door
Open & 5 Beeps
Displays IGN
Symbol & 5 Beeps
5 Beeps
Displays Hood
Open & 5 Beeps
5 Beeps
PARK LIGHT
FLASHES
3 Slow Flashes
4 Slow Flashes
5 Slow Flashes
5 Flashes
6 Flashes
7 Flashes
PROBLEM
System is in Service Mode
Door Open
Ignition On
Brakeswitch Engaged
Hoodswitch (Hood Open)
Tach Lock-Out/Failed Start
SOLUTION
Cancel Service Mode
Manual Transmission
Models Only
Turn Off Ignition Key and Try Again
Check Brakepedal or
Consult Dealer
Close Hood and/or
Check Hoodpin Switch or Consult Dealer
Start Vehicle with Key,
Wait 5 Seconds and Try
Again or Consult Dealer
TRANSMISSION LEARNING
Important! The remote starter will hold 4 transmitter codes. It is recommended that when programming in transmitters, you fill up all four transmitter codes, even if only using one or two transmitters. This will clear all other transmitter coding from the unit and prevent stray coding or possible interference from other remote transmitters.
In you purchase new transmitters, they will have to be programmed to your unit before they will function. Your local Titan dealer can do this for you, but in the event you do not have access to a dealer, you can program them in yourself. All transmitters to be used on the vehicle must be programmed in at the same time. If you try to add only one transmitter, when you add it, it will erase all other transmitter in the system, so you must code in all transmitters. This is a security safety feature in the event you lose a transmitter.
12 Titan Data Series TS152RC Owner’s Guide
IGNITION ON Hold
CODING IN TRANSMITTERS
1. Within 3 seconds, turn ignition key On and Off 3 times, leaving the key in the “ON” position
(On-Off-On-Off-On).
2. Press and hold the Program button on the antenna (center of windshield). The park lights will turn “On” and the horn/siren (optional) will honk once. Continue to hold the Program button.
The park lights will turn “Off” and the horn/siren (optional) will honk 5 times quickly.
3. While holding the Program button, press and release the Lock button on each of the remote transmitters to be programmed. If using two transmitters, code in each transmitter twice. Turn off the key. One long horn honk will follow to show you have exited programming.
BATTERY REPLACEMENT
If your system begins to show a significant reduction in range, or the remote does not respond correctly, it may be time to change the batteries. Battery life is indicated on the LCD display of the transmitter. It is recommended to change the battery when the indicator is down to one bar. The transmitter uses 1 - AAA 1.5 Volt battery. Just slide open the cover on the back and change the battery.
WARRANTY
The manufacturer warrants to the original purchaser of the Remote Starter or Remote Starter /
Security System, that the product shall be free from defects in material and workmanship. However, should this product be proven to be defective, within a three year period from the original date of purchase, the manufacturer will, without charge to the purchaser (excluding any charges incurred to have the product delivered to the manufacturer), repair or replace the main control module of the
Remote Starter or Remote Starter / Security System if the manufacturer agrees it to be defective.
All other components or parts of the Remote Starter or Remote Starter / Security System such as
Transmitters, Antennas or other components carry a warranty period of one year from original date of purchase.
All warranties apply to the original purchaser and the vehicle in which the unit was originally installed
ONLY. Repairs or replacement of defective items shall remain at the discretion of the manufacturer.
All other add-on parts, components, accessories, and/or optional equipment pertaining to the remote starter or remote starter / security system such as interface modules or other accessories are not included in the manufacturer’s warranty. This warranty is non-transferable. Request for warranty service from any Factory Authorized Dealer must be accompanied with the original purchase receipt.
Failure to comply with any of these conditions may result in warranty being void and/or refused.
This warranty does not cover the following: removal and reinstall labor charges, shipping charges, abuse, misuse, or accidental damages to the remote starters and/or alarms, automobile, and/or parts thereof. This warranty is void upon modification, repairs, or alterations to any part of the product.
Titan Data Series TS152RC Owner’s Guide 13
The manufacturer does not guarantee or insure against theft of the vehicle or its contents. Alarm models are designed only to act as a deterrent against possible theft. Alarms may qualify for auto insurance discounts.
Contact your insurance agent for further information. The manufacturer shall not be held liable for any consequential damages due to breach of this or any other warranty, expressed or implied. This warranty gives you specific legal rights. Your specific legal rights may vary for each region. CERTAIN
DAMAGES EXCLUDED – The manufacturer expressly disclaims any liability or responsibility for incidental damages caused by the product, including economic loss, loss of use of the product, car rentals, or any other costs relating to the care and custody of the product. The manufacturer disclaims liability or responsibility for any consequential damages caused by the product or resulting from its use, including the cost of repairing or replacing other property damaged by the product or caused by its use, whether or not the product is working properly. The product is intended to deter unauthorized use of the vehicles in which it is installed. The manufacturer does not warrant that the product is fool-proof against theft and/or vandalism and/or human error or misuse. The manufacturer accepts no liability or responsibility for any damage of any kind whatsoever caused to any vehicle in which the product is installed or any resulting damage from its use. The manufacturer accepts no responsibility or liability for any damage resulting to or theft of the vehicle or its contents caused or alleged to be caused, directly or indirectly, by failure of the product.
THE MANUFACTURER OR TITAN SHALL NOT IN ANY CASE BE LIABLE FOR DAMAGES
INCURRED OF ANY KIND WHEN A REMOTE STARTER HAS BEEN USED ON A VEHICLE, THE
TRANSMISSION OF WHICH WAS NOT SET TO THE MANDATED POSITION.
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation of this device is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void the user’s authority to operate this device.
14 Titan Data Series TS152RC Owner’s Guide
Titan Data Series TS152RC Owner’s Guide 15
Please visit www.TitanInnovations.ca for more information
This unit is covered by a Manufacturers Warranty.
Please refer to your Owner’s Manual for details.
Revision 1.01
