EDIT,9013768-1_N-Ser-StanAlon_DS 2/13/06 10:42 AM Page 1

Matrix™ N Standalone Switch

• High-performance premium, standalone edge switch

• Fully integrated advanced switching and routing

• Optimized for high-availability services and maximum uptime

• Enables premium Secure Networks features in smaller network environments

• Delivers advanced policy, QoS and flow-based switching

• High-performance integrated switching and routing

— Switching/routing performance: 13.5 Mpps

— Switching capacity:

18 Gbps

— Supports more highbandwidth and latencysensitive applications

• Advanced security features

— 802.1x, PWA, and MACbased authentication

— Dynamic and static policy

— Multi-user per port policy

— Multiple authentication types per port

• Key enabler of Secure

Networks solutions

— Acceptable Use Policy

— Secure Application

Provisioning

— Dynamic Intrusion

Response

— Trusted End System

• Flow-based switching and multilayer packet classification

— Enables business-critical application transport, security and user personalization

— Tunes the network to business drivers; makes the network more eff i c i e n t

• Premium software features throughout the network infrastructure

— Supports the same functionality as Matrix

N-Series chassis

— Decreases costs by simplifying configuration, maintenance, and support

A Premium Standalone Enterprise

Switch

Ideal for edge applications in smaller wiring closets, the Matrix N Standalone delivers the same premium switch and routing functionality found in the Matrix

N3, N5, and N7 chassis in a smaller, integrated high-performance switch.

Designed to complement an existing network of Matrix N-Series switches, the Matrix N

Standalone provides unparalleled switching functionality and security capabilities.

The Matrix N Standalone leverages

Enterasys’ advanced nTERA™ ASICs and delivers high performance and flexibility to ensure comprehensive switching, routing,

Quality of Service, security and traffic containment unmatched by competitive solutions.

Integrated Services Design with

Flow Based Switching

The industry’s first Integrated Services

Design enables every Matrix N Standalone to deliver:

• Switching/VLAN Services

• IP Routing

• Advanced Multilayer Packet

Classification (including Port-Based and User-Based)

• Security (User, Host, Network)

• Management, Control and Analysis

This integrated functionality is provided in a single system and is the same premium software feature set found on chassisbased Matrix N-Series systems.

Flow-based switching allows communication flows to be established between two end points in the switch, which provides a very granular level of control in the system while enabling the switch to handle a large volume of traffic. Benefits of a flowbased switching architecture are increased security protection in case of unwanted attacks on the network and increased Quality of Service for mission-critical traffic types.

Advanced Switching Services,

VLANs and Quality of Service

All Matrix N-Series switches, including the Matrix N Standalone, support standards-based switching. IEEE standards such as 802.1D (Mac Bridges), 802.3x

(Flow Control), 802.1p (Traffic Prioritization),

802.1s (Multiple Spanning Tree), 802.1w

(Rapid Reconvergence), and 802.3ad

(Link Aggregation) are all fully supported.

The Matrix N Standalone provides extensive

VLAN support including a wide range of

VLAN and classification capabilities.

These include Layer 2, Layer 3, and Layer

4 classification and industry-standard

802.1q (Tagging VLAN) support. Up to

4,096 VLANS are supported on each

Matrix N Standalone switch.

Page 1 of 6 • Data Sheet

EDIT,9013768-1_N-Ser-StanAlon_DS 2/13/06 10:42 AM Page 2

Broad support for Quality of Service allows granular control of a variety of traffic types including Voice over IP, real-time and non-real-time video, and data-intensive applications. Extensive classification capabilities combined with network-wide policies allow the Matrix N Standalone to rate limit traffic flows granularly. Both

We i g h t e d Round Robin, which keeps low priority traffic from being completely starved of bandwidth, and Strict Priority

Queuing is supported. Support for the IP

Differentiated Services Code Point (DSCP) enables the switches to enforce requested service levels.

Extensive Security Support

With the Matrix N Standalone switch, the network is protected at the first point of entry where users access the network.

Authentication and security of end-user ports can be managed at the individual port or individual user granularity level.

Matrix N Standalone switches support user authentication via IEEE 802.1x, access control lists, VLANs, RADIUS, MAC and

Web-based (PWA) authentication. Multi-user authentication and multiple authentication types per port are both supported on the

Matrix N Standalone switch.

A Key Enabler of Secure Networks

The Matrix N Standalone supports enhanced security that goes beyond traditional perimeter security and access control.

Secure Networks integrates advanced security and management features to centralize and automate granular control of the entire network infrastructure. Wo r k i n g in conjunction with NetSight™ Policy

Manager, NetSight Automated Security

M a n a g e r, and Dragon™ Intrusion Defense

Systems, the Matrix N Standalone switch is a key enabler of Secure Networks.

Flexible, dynamic policy capability and

Flow Setup Throttling in the Matrix N

Standalone switch enable network managers to support Acceptable Use Policy, Secure

Application Provisioning, Secure Guest

Access, Dynamic Intrusion Response,

Single Sign-On, and Trusted End System

Secure Networks solutions.

Connectivity, Performance, and

Availability

The Matrix N Standalone supports 48

10/100/1000Base-TX ports and four

1000Base-X ports via mini-GBICs. Mini-

GBICs that support both multimode and single mode fiber over long- or short-haul fibers are available. The high-performance architecture of the Matrix N Standalone supports throughput of 13.5 Mpps, ensuring no degradation of performance as new users connect to the network.

Engineered for high availability, the

Matrix N Standalone comes standard with two redundant power supplies, allowing the switch to failover seamlessly to the redundant power supply in case of a failure.

Page 2 of 6 • Data Sheet

EDIT,9013768-1_N-Ser-StanAlon_DS 2/13/06 10:42 AM Page 3

Embedded Services

Multilayer Packet Processing

Multi-stage Packet Classification

IP TOS Re-write

VLAN/Priority Tag Re-Write

Switching/VLAN Services

Generic VLAN Registration Protocol 802.1Q VLANs

802.1D MAC Bridges

802.1w Rapid-reconvergence of Spanning Tree

802.1s Multiple Spanning Tree

802.3ad Link Aggregation

Broadcast Suppression

802.3ae Gigabit Ethernet

802.3x Flow Control

SMON Port Redirect

SMON VLAN Redirect

IDS Redirect

IP Multicast (IGMP support v1, v2, querier)

Jumbo Packet with MTU Discovery Support for Gigabit

Ethernet ports

Flow Set-Up Throttling

VLAN-to-policy mapping

Automatic port disabling

Span Guard

IP Routing

Basic IP Routing Package: Part of Enterasys

Operating System (EOS) and included in all base DFEs.

Static Routes

RIPv1/v2

RIP Equal Cost Multipath (ECMP)

IGMPv1/IGMPv2

ICMP

Virtual Router Redundancy Protocol (VRRP)

ACL Basic

DHCP Server/Relay

Extended IP Routing Package:

A software upgrade (N-EOS-L3) sold on a per-chassis basis.

OSPF with Multipath Support

DVMRP

Extended ACLs

PIM-SM

LS-NAT policy-based routing

Security (User, Network and Host)

Telnet (Inbound/Outbound)

Secured Shell (SSHv2) (switch interface only)

Syslog

802.1X Port-Based Network Access Control (Single User)

Web-based authentication

MAC-based authentication

Multiple authentication types (802.1X, MAC address, web) per port

Management, Control and Analysis

SNMP v1/v2c/v3

Web Support

CLI Support

Single IP

Multi-image Support

Multiconfiguration File Support

Editable Configuration File

Configuration Upload/Download

DHCP Client

FTP Client

RADIUS Client Support with PAP and CHAP

Entity MIB

COM Port Boot Prom Download via ZMODEM

RMON (rfc2819) Stats, History, Alarms, Events

High-Capacity RMON (64-bit counters)

SMON (rfc2613) VLAN and Priority Stats

Simple Network Time Protocol (SNTP)

Trace Route

Dynamic Egress

Inbound Rate Policing

Inbound Rate Policing

Outbound Rate Shaping

Node and Alias Table

Cabletron Discovery Protocol (CDP)

Port-Based MAC Locking

Access Control Lists

Network Management

NetSight Console

NetSight Policy Manager

NetSight Inventory Manager

NetSight Automated Security Manager

Page 3 of 6 • Data Sheet

EDIT,9013768-1_N-Ser-StanAlon_DS 2/13/06 10:42 AM Page 4

Performance/Capacity

Address Table Size

64k MAC Addresses

Throughput Capacity

18 Gbps

Switching Performance

13.5 Mpps (measured in 64-byte packets)

VLANs Supported

4,094

10/100 Priority Queues

4

GbE Priority Queues

8

Classification Rules

64k

Specifications

Physical Specifications

Dimensions

8.51 cm (3.35") H x 44.45 cm (17.5") W x 47.90 cm

(18.86") D

Weight

13.38 kg (29.5 lbs), gross shipping; 13.15 kg (29 lbs), net

Rack Mounting and Unit Height

19”

2RU

Environmental

Operating Temperature

5° C to 40° C (41° F to 104° F)

Storage Temperature

-30°C to 73°C (-22°F to 164°F)

Operating Relative Humidity

5% to 95% (non-condensing)

Processors/Memory

Processor: MPC750CX, 400 MHz processor

Dynamic Random Access Memory: 128 MB

FLASH Memory: 32 MB

Power

Power Supply Redundancy: 1+1 (Standard)

Power Supply Wattage: 250 Watts per supply

Input Frequency: 47 to 63 Hz

Input Voltage Range: 90 to 264VAC

Input Current: 1.8 Arms, 90 VAC at full load

Agency and Standards Specifications

Safety

UL 60950, CSA C22.2 No. 60950, 73/23/EEC, EN

60950, IEC 60950, EN 60825, 2 CFR 1040.10

Electromagnetic Compatibility

47 CFR Parts 2 & 15, CSA C108.8, 89/336/EEC, EN

55022, 61000-3-2, 61000-3-3 and 55024, AS/NZS

CISPR 22, VCCI V-3

MTBF (Predicted)

Matrix N Standalone: > 200,000 hours

IEEE Standards

IEEE 802.3

IEEE 802.1D

IEEE 802.1p

IEEE 802.1Q

IEEE 802.1w

IEEE 802.1s

IEEE 802.1X

IEEE 802.3ad

Page 4 of 6 • Data Sheet

EDIT,9013768-1_N-Ser-StanAlon_DS 2/13/06 10:42 AM Page 5

Ordering Information

2G4072-52

Matrix N Standalone switch with 48-port 10/100/1000Base-TX ports via RJ45 and four 1000Base-X ports via mini-GBIC (includes two redundant internal power supplies)

N-EOS-L3

Enterasys Operating System (EOS) Layer 3 routing package for Matrix N-Series switches

DFE-256MB-UGK

256 MB Dimm memory module (required for LS-NAT and PIM-SM)

Mini-GBIC Modules

MGBIC-LC01

Mini-GBIC with 1000Base-SX port via LC connector

MGBIC-LC03

Mini-GBIC with 1000Base-LX/LH (long-haul 2 km) over multimode fiber via LC connector

MGBIC-LC09

Mini-GBIC with 1000Base-LX port via LC connector

MGBIC-MT01

Mini-GBIC with 1000Base-SX port via MTRJ connector

MGBIC-02

Mini-GBIC with 1000Base-TX port via RJ45 connector

MGBIC-08

Mini-GBIC with 1000Base-ELX (long-haul 70 km) port via MTRJ connector

Note: Matrix N Standalone switches ship with Enterasys’ Operating System (EOS), which includes the features described in this data sheet. The only exception is the advanced routing features that are provided through a software license (Part No. N-EOS-L3).

Page 5 of 6 • Data Sheet

EDIT,9013768-1_N-Ser-StanAlon_DS 2/13/06 10:42 AM Page 6

Warranty

As a customer-centric company, Enterasys is committed to providing the best possible workmanship and design in our product set. In the event that one of our products fails due to a defect in one of these factors, we have developed a comprehensive warranty that protects you and provides a simple way to get your products repaired as soon as possible.

Service and Support

Enterasys understands that superior service and support is a critical component of Networks that Know.

™ The Enterasys

SupportNet Portfolio—a suite of innovative and flexible service and support offerings—completes the Enterasys solution. SupportNet offers all the post-implementation support services you need—online, onsite or over the phone—to maintain your network availability and performance.

Additional Information

For additional information on the Matrix N Standalone and other Matrix switching products, please visit the web at enterasys.com/products/switching/

Contact Information

Contact Enterasys Sales at 877-801-7082 or e n t e r a s y s . c o m / c o r p o r a t e / c o n t a c t / c o n t a c t - s a l e s . h t m l

Matrix, NetSight and Dragon are trademarks or re g i s t e red trademarks of Enterasys Networks.

All other products or services mentioned are identified by the trademarks or service marks of their respective companies or org a n i z a t i o ns.

NOTE: Enterasys Networks reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

All contents are copyright © 2006 Enterasys

Networks, Inc. All rights re s e r v e d .

Lit. #9013768-1 2/06

Page 6 of 6 • Data Sheet