Make IT easy
Make IT easy:
Enclosure, power and cooling solutions
Make IT easy:
Enclosure, power
and cooling solutions
Enclosures
Security
TS IT network/server enclosure with viewing door��������������������������������10
Basic Safe���������������������������������������������������������������������������������������������46
TS IT network/server enclosure with perforated door���������������������������12
Modular Safe�����������������������������������������������������������������������������������������47
52 U server enclosure���������������������������������������������������������������������������14
Modular Safe Extend�����������������������������������������������������������������������������48
TS 8 colocation enclosure���������������������������������������������������������������������15
Data Center Container DCC������������������������������������������������������������������49
TS 8 NEMA 12/UL Type 12 network enclosure�������������������������������������16
Fire alarm and extinguisher system DET-AC/EFD Plus�������������������������50
TS 8 switch enclosure, Cisco Nexus® 7018������������������������������������������18
Security Rooms�������������������������������������������������������������������������������������51
Network data rack���������������������������������������������������������������������������������19
EL 3-part enclosure�������������������������������������������������������������������������������20
Monitoring Systems
EL 3-part NEMA 12 enclosure���������������������������������������������������������������21
CMC III Processing Unit Compact��������������������������������������������������������54
EL 2-part enclosure�������������������������������������������������������������������������������25
Monitor and keyboard unit��������������������������������������������������������������������63
AE enclosure with 19” (482.6 mm) mounting rails��������������������������������26
Monitoring����������������������������������������������������������������������������������������������64
AE enclosure with 19” (482.6 mm) pull-out frame���������������������������������27
Accessories
Power
Base������������������������������������������������������������������������������������������������������68
UPS – Power Modular Concept�������������������������������������������������������������28
Walls������������������������������������������������������������������������������������������������������79
Three phase modular UPS��������������������������������������������������������������������31
Baying���������������������������������������������������������������������������������������������������81
Basic PDU���������������������������������������������������������������������������������������������33
Doors/locks��������������������������������������������������������������������������������������������82
Metered PDU�����������������������������������������������������������������������������������������34
Interior installation���������������������������������������������������������������������������������84
Smart PDU���������������������������������������������������������������������������������������������35
Cable management�������������������������������������������������������������������������������97
Switched PDU���������������������������������������������������������������������������������������37
Ventilation��������������������������������������������������������������������������������������������104
Liquid Cooling Package
Technical Details
TopTherm LCP Rack CW and DX����������������������������������������������������������40
TS IT����������������������������������������������������������������������������������������������������108
TopTherm LCP Inline CW and DX���������������������������������������������������������41
TopTherm LCP T3+ CW������������������������������������������������������������������������42
TopTherm LCP Passive CW������������������������������������������������������������������43
2
Make IT easy: Rack & data center solutions
Make IT easy: Rack & data center solutions
3
4
9
7
5
6
8
3
10
1
4
2
Make IT easy: Rack & data center solutions
The new
TS IT rack.
A new global standard for network and server equipment.
Rittal has unveiled a newly developed rack system which is set to redefine the global
standard for network and server equipment. The name “TS IT” stands for an intelligent
modular system comprising both racks and a comprehensive range of accessories. Reduced
complexity and the convenient snap-in assembly technology not only boost the efficiency of
order processing and assembly – they also ensure lower costs. With the new TS IT, Rittal has
created a single, series-manufactured rack system to satisfy practically all expectations when
it comes to modular, flexible network and server racks.
Individual configuration
One cabinet handles practically all network and server
Innovative door concept
Viewing doors for high-performance server applications
enclosure requirements
with liquid cooling or perforated doors for room climate
1
6
control
2
High load capacity
and variable interior installation
Load capacity of more than 3,200 pounds and tool-free
Split rear doors
Split rear doors from a height of
adjustment of the 19” (482.6 mm) mounting rails. Offset
38 U (1800 mm) for optimized space utilization
7
positioning facilitates alternative mounting widths (21”,
23”, and 24” possible)
Intelligent accessories
The TS IT concept ensures fast and simple selection of
Tool-free installation
System accessories with new, time-saving snap-in
the system accessories
3
technology (for component shelves, cable ducts
8
9
Built-in added value
and more)
for the 19” (482.6 mm) system
Direct, space-saving clip mounting of the new Rittal
Intelligent cable management
Multifunctional roof with cable entry down the sides for
PDU busbar in the rear zero U space. Tool-free front-
4
side integration of cable management.
maximum convenience and unhindered
air circulation for active components
Simple positioning
Labelling of the height units and pitch pattern for simple
Fast side panel assembly
Divided sidewalls with quick fastenings, integrated
determination of the 19” (482.6 mm) rail spacing
5
10
locks and additional internal latching
Make IT easy: Rack & data center solutions
5
Make IT fast.
With tool-free component installation and fast,
loosened and the panels can be moved and locked
efficient assembly.
into a new location. Offset positioning allows for
From its original design, every aspect of the TS IT rack
alternative mounting widths – 21”, 23” and 24” options
has been engineered to leverage all the advantages of
are available. Integrated locks and internal latches
tool-free assembly, making it possible for one person
maximize security as well.
to complete the process quickly and efficiently. Side
6
panels are divided and slide into place – there are no
Reducing the complexity of design saves time
screws. Slide rails, component shelves, telescoping
right from the planning stages
slides and a variety of additional accessories simply
Tool-free assembly for racks and accessories
clip into place on the rear panel and are secured
makes the most of snap-in technology
in front – all without tools. Should the 19” mounting
Integrated locks, latches and quick- fasteners
rails need adjusting, quick-release fasteners are
help to make completion a one-person task
Make IT easy: Rack & data center solutions
Make IT simple.
With a high load capacity and integrated cable
targeted cable routing for a specific height unit.
management.
The rail systems for interior installation enable rear
The TS IT is rugged and reliable. With a load capacity
cable clamping and strain relief using nylon loops, clips
of more than 3,200 pounds on the 19” mounting rails, it
and cable ties. The intelligent system assigns every
is ready to meet the highest stability requirements.
cable to its proper place.
And it provides the same commitment to reliability
through its intelligent cable management system.
High load capacity of more than 3,200 pounds
Patch cables are easily handled via options ranging
Intelligent, integrated cable management
from a single cable guide ring to cable ducts for
Expansive range of accessories
Make IT easy: Rack & data center solutions
7
Make IT flexible.
With an innovative door concept and
Split rear doors 38 U and taller ensure optimum space
multifunctional roof design.
The TS IT rack stands out with its innovative solutions
utilization. The multifunctional roof incorporates brush
in enclosure roof and door designs. All doors are
down the sides of the enclosure, as well as cable
prepared for an assortment of locking options and
clamping pieces directly behind the brush strips.
come with 180° hinges and comfort handles for both
A cutout for mounting a fan module is also standard.
strips running from front to back on both sides and
front and rear. Viewing doors are the first choice
for rack climate control while perforated doors take
Viewing or perforated door options
advantage of room climate control with 85% of the
Multifunctional roof design
surface area perforated to maximize air flow.
8
Make IT easy: Rack & data center solutions
Make IT perfect.
With built-in added value and high energy
The TS IT via its flexible compartmentalization
efficiency.
With its comprehensive list of standard features, the TS
for rack, row and room climate control, along with
IT comes equipped to meet practically all the demands
strips, can prove to be extremely energy-efficient.
placed on network and server enclosures. Many of its
Compartmentalization can also provide additional
innovative details represent a new level of integrated
mounting space for up to 6 U.
variable termination options with its all-around brush
added value. Integrated pitch patterns permit direct
determination of the rail spacing for simple component
Comprehensive lineup of standard features
positioning. And, the rack has front and back height
A lengthy list of value-adding extras
unit labeling that’s readable from the front – an added
High energy efficiency
convenience and time-saver.
Make IT easy: Rack & data center solutions
9
TS IT network/server enclosure with viewing door
Component Shelves Page 89 Slide Rails Page 91 System Chassis Page 84 Cable Guide Rings Page 99 Cable Management Panel Page 100 PDU Page 33
Material:
− Enclosure: Carbon steel
− Viewing window: Single-pane
safety glass, 0.12” (3.0 mm)
Surface finish:
− Enclosure frame, interior
installation: Dipcoat-primed
− Doors and roof: Dipcoat-primed,
powder-coated
Color:
RAL 9005, RAL 7035
Included (not preinstalled):
− Spacers for passive cooling (4)
− Grounding provisions (1 set)
− M5 multi-tooth screws and
cage nuts, conductive (50)
Protection rating:
UL/cUL
Load capacity of rails:
− 3372 lbs (15000 N)
Distance between
rails as delivered:
− Depth ≤ 32” (800 mm):
21.5” (545 mm)
− Depth ≥ 39” (1000 mm):
29.3” (745 mm)
Detailed drawings:
Available at www.rittal.us
Height: 48 - 79” (1200 - 2000 mm), Depth: 24 - 40” (600 - 1000 mm)
Packs of
24 U
24 U
38 U
42 U
42 U
79 (2000)
Height inches (mm)
48 (1200)
48 (1200)
71 (1800)
79 (2000)
Width inches (mm)
32 (800)
32 (800)
32 (800)
32 (800)
32 (800)
Depth inches (mm)
32 (800)
40 (1000)
32 (800)
24 (600)
32 (800)
–
–
–
Aluminum front viewing door, 180° hinges, with
comfort handle for semi-cylinder and security lock 3524 E
1
Sheet steel rear door, 180° hinges, with comfort
handle for semi-cylinder and security lock 3524 E
1
Sheet steel rear door, 180° hinges, vertically divided, with
comfort handle for semi-cylinder and security lock 3524 E
1
Depth-variable 19” (482.6 mm) rails front and rear,
on depth stays with quick-release fasteners
2
Multi-piece roof plate with side cable entry in the
depth and covered cut-out for fan mounting plate
1
–
Page
–
1)
RAL 7035
1
5503.120
5504.120
5505.120
5506.120
5507.120
RAL 9005
1
5503.220
5504.220
5505.220
5506.220
5507.220
Split sidewall (top/bottom), RAL 70352)
1
–
–
5501.000
5501.010
5501.020
79
Split sidewall (top/bottom), RAL 90052)
1
–
–
5501.005
5501.015
5501.025
79
Solid sidewall, RAL 70353)
2
8175.235
8176.235
–
–
–
79
Part No.
Accessories
Sidewalls, lockable
Sidewalls,
screw attachment
3)
2
9969.949
9969.952
–
–
–
79
RAL 7035
2
5501.310
5501.320
5501.310
5501.300
5501.310
78
RAL 9005
2
5501.315
5501.325
5501.315
5501.305
5501.315
78
Solid sidewall, RAL 9005
Base mount
Gland plates, modular
See from page 74
Base/plinth
See from page 70
Fan mounting plate for TS IT incl. thermostat
Air baffle plate
RAL 7035
1
5502.020
5502.020
5502.020
5502.010
5502.020
104
RAL 9005
1
5502.025
5502.025
5502.025
5502.015
5502.025
104
1 set
–
–
–
5501.815
5501.815
105
Cable route
1
–
–
–
5502.120
5502.120
102
Cable duct
1
–
–
–
5502.105
5502.105
101
Included 1) Cable entry, rear
sides of cabinet
10
2)
Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet
Metric measurements for are exact, imperial measurements are rounded
3)
Packaged as pair; set will cover both
Make IT easy: Enclosure, power and cooling solutions
TS IT network/server enclosure with viewing door
Height: 79 - 81” (2000 - 2200 mm), Depth: 32 - 48” (800 - 1200 mm)
Packs of
Height inches (mm)
42 U
42 U
42 U
42 U
47 U
79 (2000)
79 (2000)
79 (2000)
79 (2000)
87 (2200)
Width inches (mm)
24 (600)
32 (800)
24 (600)
32 (800)
32 (800)
Depth inches (mm)
40 (1000)
40 (1000)
48 (1200)
48 (1200)
32 (800)
Aluminum front viewing door, 180° hinges, with
comfort handle for semi-cylinder and security lock 3524 E
1
Sheet steel rear door, 180° hinges, vertically divided, with
comfort handle for semi-cylinder and security lock 3524 E
1
Depth-variable 19” (482.6 mm) rails front and rear,
on depth stays with quick-release fasteners
2
Multi-piece roof plate with side cable entry in the
depth and covered cut-out for fan mounting plate
1
Page
RAL 7035
1
5508.120
5509.120
5510.120
5511.120
5512.120
RAL 9005
1
5508.220
5509.220
5510.220
5511.220
5512.220
Split sidewall (top/bottom), RAL 70351)
1
5501.030
5501.030
5501.040
5501.040
5501.050
Split sidewall (top/bottom), RAL 90051)
1
5501.035
5501.035
5501.045
5501.045
5501.055
79
RAL 7035
2
5501.320
5501.320
5501.350
5501.350
5501.310
78
RAL 9005
2
5501.325
5501.325
5501.355
5501.355
5501.315
78
5502.020
5502.020
104
Part No.
Accessories
Sidewalls, lockable
Base mount
Gland plates, modular
79
See from page 74
Base/plinth
See from page 70
Fan mounting plate for TS IT incl. thermostat
RAL 7035
5502.010
5502.020
5502.010
1
5502.015
5502.025
5502.015
5502.025
5502.025
104
1 set
5501.805
5501.815
5501.805
5501.815
5501.835
105
Cable route
1
5502.120
5502.120
5502.120
5502.120
5502.120
102
Cable duct
1
–
5502.105
–
5502.105
5502.145
101
Air baffle plate
Included
1)
RAL 9005
1
Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet
Make IT easy: Rack & data center solutions
Metric measurements for are exact, imperial measurements are rounded
11
TS IT network/server enclosure with perforated door
Component Shelves Page 89 Slide Rails Page 91 System Chassis Page 84 Cable Guide Rings Page 99 Cable Management Panel Page 100 PDU Page 33
Material:
Carbon steel
Surface finish:
− Enclosure frame, interior
installation: Dipcoat-primed
− Doors and roof: Dipcoat-primed,
powder-coated
Color:
− Frame and enclosure panels:
RAL 9005, RAL 7035
− Interior installation: RAL 9005
Included (not preinstalled):
− Spacers for passive cooling (4)
− Grounding provisions (1 set)
− M5 multi-tooth screws and
cage nuts, conductive (50)
Protection rating:
UL/cUL
Distance between
rails as delivered:
29” (745 mm)
Detailed drawings:
Available at www.rittal.us
Load capacity of rails:
− 3372 lbs (15000 N)
Height: 48 - 79” (1200 - 2000 mm), Depth: 40 - 48” (1000 - 1200 mm)
PU
24 U
42 U
42 U
42 U
42 U
42 U
42 U
79 (2000)
Height inches (mm)
48 (1200)
79 (2000)
79 (2000)
79 (2000)
79 (2000)
79 (2000)
Width inches (mm)
32 (800)
24 (600)
32 (800)
24 (600)
32 (800)
24 (600)
32 (800)
Depth inches (mm)
40 (1000)
40 (1000)
40 (1000)
42 (1050)
42 (1050)
48 (1200)
48 (1200)
–
–
–
–
–
–
Perforated1) sheet steel front door, 180° hinges, with
comfort handle for semi-cylinder and security lock 3524 E
1
Perforated1) sheet steel rear door, 180° hinges, with
comfort handle for semi-cylinder and security lock 3524 E
1
Perforated sheet steel rear door, 180° hinges, vertically
divided, with comfort handle for semi-cylinder and security lock
3524 E
1
Depth-variable 19” (482.6 mm) rails front and rear,
on depth stays with quick-release fasteners
2
Multi-piece roof plate with side cable entry in the
depth and covered cut-out for fan mounting plate
1
Page
1)
–
RAL 7035
1
5504.110
5508.110
5509.110
–
–
5510.110
5511.110
RAL 9005
1
5504.210
5508.210
5509.210
5521.210
5522.210
5510.210
5511.210
Split sidewall (top/bottom), RAL 70352)
1
–
5501.030
5501.030
–
–
5501.040
5501.040
79
Split sidewall (top/bottom), RAL 90052)
1
–
5501.035
5501.035
5501.095
5501.095
5501.045
5501.045
79
Solid sidewall, RAL 70353)
2
7824.120
–
–
–
–
–
–
–
Part No.
Accessories
Sidewalls, lockable
Sidewalls,
screw attachment
3)
2
9969.952
–
–
–
–
–
–
–
RAL 7035
2
5501.320
5501.320
5501.320
–
–
5501.350
5501.350
78
RAL 9005
2
5501.325
5501.325
5501.325
–
–
5501.355
5501.355
78
Solid sidewall, RAL 9005
Base mount
Gland plates, modular
See from page 74
Base/plinth
Fan mounting plate for TS IT incl. thermostat
Air baffle plate
See from page 70
RAL 7035
1
5502.020
5502.010
5502.020
–
–
5502.010
5502.020
104
RAL 9005
1
5502.025
5502.015
5502.025
5502.015
5502.025
5502.015
5502.025
104
1 set
–
5501.805
5501.815
5501.805
5501.815
5501.805
5501.815
105
Cable route
1
–
5502.120
5502.120
5502.120
5502.120
5502.120
5502.120
102
Cable duct
1
–
5502.105
–
–
–
5502.105
5502.105
101
Included 1) Vented surface area approx. 85% perforated 2) Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet
3)
Packaged as pair; set will cover both sides of cabinet
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
12
TS IT network/server enclosure with perforated door
Height: 87” (2200 mm), Depth: 40 - 48” (1000 - 1200 mm)
Packs of
U
Height inches (mm)
47 U
47 U
47 U
47 U
47 U
47 U
87 (2200)
87 (2200)
87 (2200)
87 (2200)
87 (2200)
87 (2200)
Width inches (mm)
24 (600)
32 (800)
24 (600)
32 (800)
24 (600)
32 (800)
Depth inches (mm)
40 (1000)
40 (1000)
42 (1050)
42 (1050)
48 (1200)
48 (1200)
Perforated1) sheet steel front door, 180° hinges, with
comfort handle for semi-cylinder and security lock 3524 E
1
Perforated sheet steel rear door, 180° hinges, with
comfort handle for semi-cylinder and security lock 3524 E
1
Depth-variable 19” (482.6 mm) rails front and rear,
on depth stays with quick-release fasteners
2
Multi-piece roof plate with side cable entry in the
depth and covered cut-out for fan mounting plate
1
1)
Page
RAL 7035
1
5513.110
5514.110
–
–
5515.110
5516.110
RAL 9005
1
5513.210
5514.210
5523.210
5524.210
5515.210
5516.210
Split sidewall (top/bottom), RAL 70352)
1
5501.060
5501.060
–
–
5501.070
5501.070
79
Split sidewall (top/bottom), RAL 90052)
1
5501.065
5501.065
5501.105
5501.105
5501.075
5501.075
79
RAL 7035
2
5501.320
5501.320
–
–
5501.350
5501.350
78
RAL 9005
2
5501.325
5501.325
–
–
5501.355
5501.355
78
Part No.
Accessories
Sidewalls, 2-part
Base mount
Gland plates, modular
See from page 74
Base/plinth
See from page 70
Fan mounting plate for TS IT incl. thermostat
RAL 7035
RAL 9005
1
5502.010
5502.020
–
–
5502.010
5502.020
104
1
5502.015
5502.025
5502.015
5502.025
5502.015
5502.025
104
1 set
5501.825
5501.835
5501.805
5501.815
5501.825
5501.835
105
Cable route
1
5502.120
5502.120
5502.120
5502.120
5502.120
5502.120
102
Cable duct
1
–
5502.145
–
–
–
5502.145
101
Air baffle plate
Included
1)
Vented surface area approx. 85% perforated
Make IT easy: Rack & data center solutions
2)
Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet
Metric measurements for are exact, imperial measurements are rounded
13
52 U server enclosure
Casters Page 72 Blanking Panels Page 107 Shelves Page 89 Baying Page 81 Bolt Down Kit Page 71
External surfaces – doors and
walls:
– Secure to external surfaces of
frame
– Doors can be easily removed or
reversed with tool-less hinge
– Door stiffener to stabilize door
and provide additional mounting
surfaces
– Maximum perforated area meets
or exceeds server manufacturer
specifications for airflow
– Ground studs on all surfaces
– External surfaces do not affect
load bearing capacity – same
ratings with or without panels
– Fully perforated front and
split-rear door
Vertical mounting rails:
– Fully depth adjustable and
maintain load capacity
regardless of where the rails
are positioned
– Floating installation system –
vertical rails are not secured
to frame members or lateral
support channels; can be
adjusted independently
– “Z” shaped, multi-fold profile –
high load bearing capacity and
multiple mounting surfaces
– U markings on front surfaces
of each rail
split rear doors
– Comfort handle (8611.200 lock)
front and rear
– Leveling feet
– M6 cage nuts with insertion tool
(bag of 50)
– M6 mounting screw with plastic
washer (bag of 100)
– 19” and 23” mounting capacity
(most part numbers, see below)
Includes:
– 19” (482.6 mm) EIA rails, front
and rear
– Solid roof with cable entry
– Perforated front door and
Note:
– Based on the PS frame system
Height: 96” (2450 mm), Depth: 42” (1050 mm)
Packs of
Height inches (mm)
52 U
52 U
52 U
52 U
52 U
52 U
96 (2450)
96 (2450)
96 (2450)
96 (2450)
96 (2450)
96 (2450)
Width inches (mm)
24 (600)
24 (600)
28 (700)
28 (700)
32 (800)
32 (800)
Depth inches (mm)
42 (1050)
42 (1050)
42 (1050)
42 (1050)
42 (1050)
42 (1050)
Color
–
RAL 7035
RAL 9005
1
Part No.
9963.7001)
–
–
–
9963.7011)
9963.714
–
–
9963.715
9963.728
9963.729
Accessories
Sidewalls - split2)
1 set
9967.976
9967.975
9967.976
9967.975
9967.976
9967.975
Caster kit
1 set
9967.483
9967.480
9967.484
9967.481
9967.485
9967.482
1 set
9978.414
9978.414
9978.414
9978.414
9978.414
9978.414
PS baying kit (8 brackets)
1)
19” capacity only
2)
Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet
Height: 96” (2450 mm), Depth: 48” (1200 mm)
52 U
52 U
52 U
52 U
52 U
52 U
Height inches (mm)
Packs of
96 (2450)
96 (2450)
96 (2450)
96 (2450)
96 (2450)
96 (2450)
Width inches (mm)
24 (600)
24 (600)
28 (700)
28 (700)
32 (800)
32 (800)
Depth inches (mm)
48 (1200)
48 (1200)
48 (1200)
48 (1200)
48 (1200)
48 (1200)
Color
–
RAL 7035
RAL 9005
–
–
–
–
–
1
9963.7501)
9963.7511)
9963.752
9963.753
9963.762
9963.763
Sidewalls - split2)
1 set
9978.403
9967.977
9978.403
9967.977
9978.403
9967.977
Caster kit
1 set
9967.483
9967.480
9967.484
9967.481
9967.485
9967.482
PS baying kit (8 brackets)
1 set
9978.414
9978.414
9978.414
9978.414
9978.414
9978.414
Part No.
Accessories
1)
14
19” capacity only
2)
Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
TS 8 colocation enclosure
Casters Page 72 Blanking Panels Page 107 Shelves Page 89 Baying Page 81 Bolt Down Kit Page 71
Intensive physical security
requirements are met with
durable construction, doors with
2-point latching, internal hinges,
locking handles and secure
cable management – all standard
features on 2, 3 and 4-door
configurations.
Doors:
– Vented surface area
approximately 64% perforated
– Two point latch on each
compartment for optimum
security
– Can convert a multi-door cabinet
into a single door version when
requirements change
– TS 8 comfort handle with lock
insert
– Optional individually keyed
compartments available
– Can be either right hand or left
hand hinged
– Internal hinges for optimum
security
Color:
RAL 9005
Height: 87” (2200 mm), Depth: 42” (1050 mm)
2 – 22 U each
3 – 14 U each
4 – 10 U each
Height inches (mm)
Packs of
87 (2200)
87 (2200)
87 (2200)
Width inches (mm)
24 (600)
24 (600)
24 (600)
Depth inches (mm)
42 (1050)
42 (1050)
42 (1050)
1
9963.770
9963.771
9963.772
Cable security kit
1
9962.840
9962.841
9962.842
Quick-adjust EIA rail kit
1
9962.843
9962.844
9962.845
Part No.
Accessories
Combination lock handle
1
9963.601
9963.601
9963.601
Security lock insert1)
1
2467.000
2467.000
2467.000
Pushbutton lock insert1)
1
2469.000
2469.000
2469.000
1)
1)
Handles and lock inserts sold separately
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
15
TS 8 NEMA 12/UL Type 12 network enclosure
Casters Page 72 Blanking Panels Page 107 Shelves Page 89 Baying Page 81 Bolt Down Kit Page 71
Our NEMA/UL Type 12 enclosures
provide a high degree of protection
from dirt, dust, dripping water and
external condensation of noncorrosive liquids.
Doors and walls:
– Secure to external surfaces of
frame
– Doors can be easily removed or
reversed
– Internal door hinge and lock
points for maximum security
Vertical mounting rails:
– Fully depth adjustable,
maintain load capacity
regardless of where the rails
are positioned
– Floating installation system,
vertical rails are not secured
to frame members or lateral
support channels; can be
adjusted independently
– “Z” shaped, multi-fold profile,
high load bearing capacity and
multiple mounting surfaces
– U markings on front and rear
surfaces of each rail
– Unique rail design allows for up
to 32 U in the zero “U” space
– Each cabinet includes M6 Cage
Nuts with insertion tool (bag of
50) and M6 Mounting screws
with plastic washers (bag of 100)
Note:
23" mounting capacity on
32" (800 mm) wide cabinets
Supply includes:
– One set of 19" (482.6 mm)
EIA rails, front & rear
– Leveling feet
Height: 48” (1200 mm), Depth: 24 - 32” (600 - 800 mm)
Packs of
Height inches (mm)
24 U
24 U
24 U
24 U
24 U
24 U
48 (1200)
48 (1200)
48 (1200)
48 (1200)
48 (1200)
48 (1200)
Width inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
32 (800)
32 (800)
Depth inches (mm)
24 (600)
24 (600)
32 (800)
32 (800)
32 (800)
32 (800)
Color
Part No.
–
RAL 7035
RAL 9005
–
–
–
–
–
NEMA 12 viewing door, solid rear door
1
9969.876
9969.877
9969.884
9969.885
9969.886
9969.887
UL Type 12 solid front & rear door
1
9963.487
–
9963.488
–
–
–
Accessories
Sidewalls - full
2
8170.235
9969.948
8175.235
9969.949
8175.235
9969.949
Base/plinths 8” (200 mm) front and rear
2
8602.605
9967.491
8602.605
9967.491
8602.805
9967.492
Base/plinths 8” (200 mm) side trim
2
8602.065
–
8602.085
–
8602.085
–
Caster kit
4
9968.751
9968.751
9968.751
9968.751
9968.751
9968.751
16
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
TS 8 NEMA 12/UL Type 12 network enclosure
Height: 79 - 87” (2000 - 2200 mm), Depth: 24 - 32” (600 - 800 mm)
42 U
42 U
47 U
47 U
42 U
42 U
42 U
42 U
Height inches (mm)
Packs of
79 (2000)
79 (2000)
87 (2200)
87 (2200)
79 (2000)
79 (2000)
79 (2000)
79 (2000)
Width inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
32 (800)
32 (800)
Depth inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
32 (800)
32 (800)
32 (800)
32 (800)
Color
Part No.
–
RAL 7035
RAL 9005
–
–
–
–
–
–
–
NEMA 12 viewing door, solid rear door
1
9969.880
9969.881
9969.882
9969.883
9969.892
9969.893
9969.894
9969.895
UL Type 12 solid front & rear door
1
9960.301
–
9963.492
–
9960.302
–
9960.303
–
Accessories
Sidewalls - full
2
8106.235
9969.920
8126.235
9969.917
8108.235
9969.916
8108.235
9969.916
Base/plinths 8” (200 mm) front and rear
2
8602.605
9967.491
8602.605
9967.491
8602.605
9967.491
8602.805
9967.492
Base/plinths 8” (200 mm) side trim
2
8602.065
–
8602.065
–
8605.085
–
8602.085
–
Cable management panel
1
–
9978.360
–
9978.361
–
9978.360
–
9978.360
Caster kit
4
9968.751
9968.751
9968.751
9968.751
9968.751
9968.751
9968.751
9968.751
Height: 79 - 87” (2000 - 2200 mm), Depth: 32 - 40” (800 - 1000 mm)
47 U
47 U
47 U
47 U
42 U
42 U
Height inches (mm)
Packs of
87 (2200)
87 (2200)
87 (2200)
87 (2200)
79 (2000)
79 (2000)
Width inches (mm)
24 (600)
24 (600)
32 (800)
32 (800)
24 (600)
32 (800)
Depth inches (mm)
32 (800)
32 (800)
32 (800)
32 (800)
40 (1000)
40 (1000)
Color
–
RAL 7035
–
–
–
NEMA 12 viewing door, solid rear door
1
9969.896
9969.897
9969.898
9969.899
–
–
UL Type 12 solid front & rear door
1
–
–
–
–
9963.490
9963.608
Sidewalls - full
2
8128.235
9969.352
8128.235
9969.352
8100.235
8100.235
Base/plinths 8” (200 mm) front and rear
2
8602.605
9967.491
8602.805
9967.492
8602.605
8602.805
Base/plinths 8” (200 mm) side trim
2
8602.085
–
8602.085
–
8602.015
8602.015
Cable management panel
1
–
9978.361
–
9978.361
–
–
Caster kit
4
9968.751
9968.751
9986.751
9986.751
9968.751
9968.751
Part No.
RAL 9005
–
–
Accessories
Height: 79 - 87” (2000 - 2200 mm), Depth: 48” (1200 mm)
Packs of
Height inches (mm)
47 U
47 U
47 U
47 U
79 (2000)
79 (2000)
87 (2200)
87 (2200)
Width inches (mm)
24 (600)
32 (800)
24 (600)
32 (800)
Depth inches (mm)
48 (1200)
48 (1200)
48 (1200)
48 (1200)
–
Color
RAL 7035
–
–
–
NEMA 12 viewing door, solid rear door
1
–
–
–
–
UL Type 12 solid front & rear door
1
9963.491
9963.609
9963.495
9963.498
Sidewalls - full
2
9969.955
9969.955
9969.957
9969.957
Base/plinths 8” (200 mm) front and rear
2
8602.605
8602.805
8602.605
8602.805
Base/plinths 8” (200 mm) side trim
2
8602.025
8602.025
8602.085
8602.025
Cable management panel
1
–
–
–
–
Caster kit
4
9968.751
9968.751
9986.751
9986.751
Part No.
RAL 9005
Accessories
Make IT easy: Rack & data center solutions
Metric measurements for are exact, imperial measurements are rounded
17
TS 8 switch enclosure, Cisco Nexus® 7018
Casters Page 72 Blanking Panels Page 107 Shelves Page 89 Baying Page 81 Bolt Down Kit Page 71
Based on Rittal’s field-proven
frame design, this enclosure
captures the air, directs it to the
switches and steers it to the rear
via a unique duct system. These
ducts can be adjusted to allow
switch installation at any position.
Air enters the open-front duct
and is channeled through the
enclosure, preventing cold air
from bypassing the IT equipment.
A matching duct on the left side,
open only to the rear, effectively
keeps hot air from escaping into
the cold aisle, directing it rearward
for efficient heat dissipation.
The enclosure comes with Rittal’s
Manage-IT cable manager system
as well as a roof design that
provides easy access directly
above the rails for the 768 cables
available to the Cisco Nexus 7018
Switch. The unique configuration
can accommodate a wide range
of options and accessories. This
Rittal enclosure is recognized
by Cisco as meeting all its
specifications and requirements for
housing the Nexus 7018 Switch.
Color:
RAL 9005
Height: 79” (2000 mm), Depth: 48” (1200 mm)
42 U
47 U
52 U
Height inches (mm)
Packs of
79 (2000)
87 (2200)
96 (2450)
Width inches (mm)
40 (1000)
40 (1000)
40 (1000)
Depth inches (mm)
48 (1200)
48 (1200)
48 (1200)
9967.972
9967.973
9967.974
1 set
9967.464
9967.469
9967.977
1
9969.956
9969.958
–
Part No.
1
Includes
19” (482.6 mm) EIA rails, front & rear
Solid roof with cable entry
Perforated split front and rear doors
1 set
1
1 set
Comfort handle (8611.200 lock) front & rear
2
9 U cable manager kit (9969.593)
8
Front to rear side air baffle
2
Leveling feet
Casters
4
1 set
M6 cage nuts with insertion tool (bag of 50)
1
M6 mounting screw with plastic washer (bag of 100)
4
Accessories
Sidewalls - split1)
Sidewalls - full
1)
18
Packaged as top/bottom set for one side only; order two sets to cover both sides of cabinet.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Network data rack
Casters Page 72
Color:
− Profile frame, base/plinth:
RAL 7035
− Trim panel, feet: RAL 5018
Load capacity:
Max. 330 lbs (150 kg), static/level
Note:
Order second mounting rails
separately
Supply includes:
− Torsionally stiff profile frame
with 19” (482.6 mm) hole pattern
− Stable base/plinth with integral
feet, with the option for base
anchoring
− Assembly parts
Detailed drawings:
Available at www.rittal.us
H
Material:
− Profile frame, base/plinth:
Carbon steel
− Feet: Die-cast zinc
Photo shows a configuration with
equipment not included in the base
part number
T2
T1
B
Height: 59 - 84” (1500 - 2122 mm), Depth: 30” (750 mm)
31
36
40
45
Height (H) inches (mm)
Packs of
59 (1500)
68 (1722)
75 (1900)
84 (2122)
Width (B) inches (mm)
22 (550)
22 (550)
22 (550)
22 (550)
Depth (T1) inches (mm)
30 (750)
30 (750)
30 (750)
30 (750)
min. 6 (150) – max. 14 (350)
Distance from the second mounting rail inches (mm)1)
1
7391.000
7396.000
Second mounting rail1)
1
7296.000
7297.000
Baying clamp
3
7494.000
Leveling feet
4
7493.000
Cable duct, 42 U
1
7827.320
C rails, 19” (482.6 mm)
6
7016.100
Cable clamp strap D = 10” (250 mm)
6
7016.120
Twin casters
4
7495.000
Depth stays
2
7401.000
Component shelf 2 U for one pair of mounting rails D = 10” (250 mm)
1
7119.250
Component shelf 2 U for one pair of mounting rails D = 16” (400 mm)
1
7119.400
Component shelf 2 U for one pair of mounting rails D = 12” (300 mm)3)
1
7148.035
Drawer 2 U for one pair of mounting rails
1
7281.035
Component shelf D = 12” (300 mm)2) 3)
1
7143.035
Component shelf D = 16” (400 mm)2) 3)
1
7144.035
Component shelf D = 20” (500 mm)2) 3)
1
7145.035
Slide rails D max. < 7” (190 mm)
10
1962.200
Slide rails D max. > 7” (190 mm)
10
1963.200
Slide rails for two pairs of mounting rails1) 2) 4)
2
7402.000
Part No.
7400.000
7445.000
7298.000
7299.000
Accessories
1)
Second mounting rail may be positioned on a 2” (50 mm) pitch pattern. 2) A second pair of mounting rails is required for assembly. 3) Stationary installation or full
withdrawal, telescopic slides required. 4) Distance between rails 14” (350 mm), can be combined with component shelf D = 20” (500 mm).
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
19
EL 3-part enclosure
Grounding Page 95
Surface finish:
Powder-coated
Protection rating:
UL listed
Supply includes:
− Wall section
− Hinged middle with 25 mm hole
pattern in the front and
T1
T3
T2
B1
H1
rear frame
− Designer viewing door
− Mini comfort handle
for 3 – 15 U
− Comfort handle and 2-point
lock for 18 – 21 U
− Includes security lock 3524 E
Color:
− Wall, hinged part: RAL 7035
− Viewing door: RAL 7035/7015
T4
H2
Material:
− Wall and hinged part:
Carbon steel, 16 ga (1.5 mm)
− Viewing window: Single-pane
safety glass, 3.0 mm
B2
Detailed drawings:
Available at www.rittal.us
Depth: 23 - 27” (573 - 673 mm), preconfigured
9U
9U
15 U
15 U
21 U
21 U
Height (H1) inches (mm)
Packs of
19 (478)
19 (478)
29 (746)
29 (746)
40 (1012)
40 (1012)
Width (B1) inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
Depth (T1) inches (mm)
23 (573)
27 (673)
23 (573)
27 (673)
23 (573)
27 (673)
Clearance width (B2) inches (mm)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
Clearance height (H2) inches (mm)
16 (415)
16 (415)
27 (683)
27 (683)
37 (949)
37 (949)
Depth of wall section (T2) inches (mm)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
Depth of hinged part (T3) inches (mm)
16 (416)
20 (516)
16 (416)
20 (516)
16 (416)
20 (516)
Max. installation depth (T4) inches (mm)
20 (520)
24 (620)
20 (520)
24 (620)
20 (520)
24 (620)
Load capacity of hinged part lbs (kg, static)
1
Part No.
99 (45)
99 (45)
165 (75)
165 (75)
165 (75)
165 (75)
7709.735
7709.535
7715.735
7715.535
7721.735
7721.535
Product-specific configuration
Wall
section:
Hinged
part:
Gland plate, solid, top
1
Gland plate with brush insert, bottom
1
Vertical system bars
2
Horizontal C rail
1
19” (482.6 mm) mounting rails, fully depth adjustable
2
Side outlet filters left and right
2
Ground rail with star grounding
1 set
Wall mounting bracket, 0.39” (10 mm)
4
Accessories
Gland plate for metric cable glands
1
7705.235
7705.235
7705.235
7705.235
7705.235
7705.235
Fan expansion kit, 230 V
1
7980.100
7980.100
7980.100
7980.100
7980.100
7980.100
Spare filter mats
5
3322.700
3322.700
3322.700
3322.700
3322.700
3322.700
Wall mounting bracket, 1.57” (40 mm)
4
–
–
2503.200
–
2503.200
–
Component shelf, 2 U, static installation or fully extendible
1
7148.035
7148.035
7148.035
7148.035
7148.035
7148.035
Component shelf, 2 U, static installation, 9.8” (250 mm) deep
1
7119.250
7119.250
7119.250
7119.250
7119.250
7119.250
Cable mgt. panel, 1 U, 5 cable cable guide rings 1.57 x 1.97” (40 x 50 mm)
1
7257.200
7257.200
7257.200
7257.200
7257.200
7257.200
20
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
EL 3-part NEMA 12 enclosure
Grounding Page 95
Surface finish:
Powder-coated
Protection rating:
NEMA 12 (IP 55 to IEC 60 529);
UL listed
T1
T3
T2
B1
H1
hole pattern in front
and rear frame
− Designer viewing door
− Mini comfort handle for 3 – 15 U
− Comfort handle and 2-point
lock for 18 – 21 U
− Includes security lock 3524 E
Color:
− Wall, hinged part: RAL 7035
− Viewing door: RAL 7035/7015
T4
H2
Material:
− Wall, hinged part:
Carbon steel, 16 ga (1.5 mm)
− Viewing window: Single-pane
safety glass, 3.0 mm
B2
Supply includes:
− Wall section
− Hinged part with 25 mm
Detailed drawings:
Available at www.rittal.us
Depth: 19” (473 mm), with punched rails
6U
9U
12 U
15 U
18 U
21 U
Height (H1) inches (mm)
Packs of
14 (345)
19 (478)
24 (612)
29 (746)
35 (878)
40 (1012)
Width (B1) inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
Depth (T1) inches (mm)
19 (473)
19 (473)
19 (473)
19 (473)
19 (473)
19 (473)
Clearance width (B2) inches (mm)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
Clearance height (H2) inches (mm)
11 (282)
16 (415)
22 (549)
27 (683)
32 (815)
37 (949)
Depth of wall section (T2) inches (mm)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
Depth of hinged part (T3) inches (mm)
12 (316)
12 (316)
12 (316)
12 (316)
12 (316)
12 (316)
Max. installation depth (T4) inches (mm)
17 (420)
17 (420)
17 (420)
17 (420)
17 (420)
17 (420)
Load capacity of hinged part lbs (kg, static)
66 (30)
99 (45)
132 (60)
165 (75)
165 (75)
165 (75)
7706.135
7709.135
7712.135
7715.135
7718.135
7721.135
1
Part No.
Product-specific configuration
Wall
section:
Gland plate, solid, top and bottom
2
Vertical punched rails
2
Horizontal C rail for cable clamping
1
Hinged part: 19” (482.6 mm) mounting rails, fully depth adjustable
2
Wall mounting bracket, 0.39” (10 mm)
4
Accessories
Gland plate with brush insert
1
7705.035
7705.035
7705.035
7705.035
7705.035
7705.035
Gland plate for metric cable glands
1
7705.235
7705.235
7705.235
7705.235
7705.235
7705.235
Wall mounting bracket, 1.57” (40 mm)
4
2503.200
2503.200
2503.200
2503.200
2503.200
2503.200
Ground rail, horizontal
1
7113.000
7113.000
7113.000
7113.000
7113.000
7113.000
Component shelf, 2 U, static installation and fully extendible
1
7148.035
7148.035
7148.035
7148.035
7148.035
7148.035
Component shelf, 2 U, static installation, 9.8” (250 mm) deep
1
7119.250
7119.250
7119.250
7119.250
7119.250
7119.250
Component shelf, 1 U, static installation, 5.5” (140 mm) deep
1
7119.140
7119.140
7119.140
7119.140
7119.140
7119.140
Cable mgt. panel, 1 U, 5 cable cable guide rings 1.57 x 1.97” (40 x 50 mm)
1
7257.200
7257.200
7257.200
7257.200
7257.200
7257.200
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
21
EL 3-part NEMA 12 enclosure
Depth: 24” (600 mm), with punched rails
12 U
15 U
21 U
Height (H1) inches (mm)
Packs of
24 (612)
29 (746)
40 (1012)
Width (B1) inches (mm)
24 (600)
24 (600)
24 (600)
Depth (T1) inches (mm)
24 (600)
24 (600)
24 (600)
Clearance width (B2) inches (mm)
20 (502)
20 (502)
20 (502)
Clearance height (H2) inches (mm)
22 (549)
27 (683)
37 (949)
Depth of wall section (T2) inches (mm)
5 (135)
5 (135)
5 (135)
Depth of hinged part (T3) inches (mm)
18 (445)
18 (445)
18 (445)
Max. installation depth (T4) inches (mm)
21 (530)
21 (530)
21 (530)
Load capacity of hinged part lbs (kg, static)
132 (60)
165 (75)
165 (75)
9969.5801)
9969.5811)
9969.5821)
1
Part No.
Product-specific configuration
Wall
section:
Gland plate, solid, top and bottom
2
Vertical punched rails
2
Horizontal C rail for cable clamping
1
Hinged part: 19” (482.6 mm) mounting rails, fully depth adjustable
2
Wall mounting bracket, 0.39” (10 mm)
4
Accessories
Gland plate with brush insert
1
7705.035
7705.035
7705.035
Gland plate for metric cable glands
1
7705.235
7705.235
7705.235
Wall mounting bracket, 1.57” (40 mm)
4
2503.200
2503.200
2503.200
Ground rail, horizontal
1
7113.000
7113.000
7113.000
Component shelf, 2 U, static installation and fully extendible
1
7148.035
7148.035
7148.035
Component shelf, 2 U, static installation, 9.8” (250 mm) deep
1
7119.250
7119.250
7119.250
Component shelf, 1 U, static installation, 5.5” (140 mm) deep
1
7119.140
7119.140
7119.140
Cable mgt. panel, 1 U, 5 cable cable guide rings 1.57 x 1.97” (40 x 50 mm)
1
7257.200
7257.200
7257.200
1)
22
Not UL listed
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
EL 3-part NEMA 12 enclosure
Depth: 15” (373 mm), with mounting panel
Packs of
Height (H1) inches (mm)
3U
6U
9U
12 U
15 U
18 U
21 U
8 (212)
14 (345)
19 (478)
24 (612)
29 (746)
35 (878)
40 (1012)
Width (B1) inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
Depth (T1) inches (mm)
15 (373)
15 (373)
15 (373)
15 (373)
15 (373)
15 (373)
15 (373)
Clearance width (B2) inches (mm)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
Clearance height (H2) inches (mm)
6 (149)
11 (282)
16 (415)
22 (549)
27 (683)
32 (815)
37 (949)
Depth of wall section (T2) inches (mm)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
Depth of hinged part (T3) inches (mm)
9 (216)
9 (216)
9 (216)
9 (216)
9 (216)
9 (216)
9 (216)
Max. installation depth (T4) inches (mm)
13 (320)
13 (320)
13 (320)
13 (320)
13 (320)
13 (320)
13 (320)
Width of mounting panel (B3) inches (mm)
19 (485)
19 (485)
19 (485)
19 (485)
19 (485)
19 (485)
19 (485)
Height of mounting panel (H3) inches (mm)
7 (165)
12 (299)
17 (432)
22 (565)
28 (699)
33 (832)
38 (965)
Load capacity of hinged part lbs (kg, static)
33 (15)
66 (30)
99 (45)
132 (60)
165 (75)
165 (75)
165 (75)
2243.605
2246.605
2249.605
2252.605
2255.605
2258.605
2261.605
1
Part No.
Product-specific configuration
Wall
section:
Gland plate, solid, top and bottom
2
Mounting panel supplied loose
1
Hinged part: 19” (482.6 mm) mounting rails
2
Accessories
Wall mounting bracket, 0.39” (10 mm)
4
2508.200
Wall mounting bracket, 1.57” (40 mm)
4
2503.200
Gland plate with brush insert
1
7705.035
Gland plate for metric cable glands
1
7705.235
C rails
4
2238.000
Blanking panels, 19” (482.6 mm)
3
see page 107
Make IT easy: Rack & data center solutions
Metric measurements for are exact, imperial measurements are rounded
23
EL 3-part NEMA 12 enclosure
Depth: 19” (473 mm), with mounting panel
3U
6U
9U
12 U
15 U
18 U
21 U
Height (H1) inches (mm)
Packs of
8 (212)
14 (345)
19 (478)
24 (612)
29 (746)
35 (878)
40 (1012)
Width (B1) inches (mm)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
24 (600)
Depth (T1) inches (mm)
19 (473)
19 (473)
19 (473)
19 (473)
19 (473)
19 (473)
19 (473)
Clearance width (B2) inches (mm)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
20 (502)
Clearance height (H2) inches (mm)
6 (149)
11 (282)
16 (415)
22 (549)
27 (683)
32 (815)
37 (949)
Depth of wall section (T2) inches (mm)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
5 (135)
Depth of hinged part (T3) inches (mm)
13 (316)
13 (316)
13 (316)
13 (316)
13 (316)
13 (316)
13 (316)
Max. installation depth (T4) inches (mm)
17 (420)
17 (420)
17 (420)
17 (420)
17 (420)
17 (420)
17 (420)
Width of mounting panel (B3) inches (mm)
19 (485)
19 (485)
19 (485)
19 (485)
19 (485)
19 (485)
19 (485)
Height of mounting panel (H3) inches (mm)
7 (165)
12 (299)
17 (432)
22 (565)
28 (699)
33 (832)
38 (965)
Load capacity of hinged part lbs (kg, static)
33 (15)
66 (30)
99 (45)
132 (60)
165 (75)
165 (75)
165 (75)
2253.605
2256.605
2259.605
2262.605
2265.605
2268.605
2271.605
1
Part No.
Product-specific configuration
Wall
section:
Gland plate, solid, top and bottom
2
Mounting panel supplied loose
1
Hinged part: 19” (482.6 mm) mounting rails
2
Accessories
Wall mounting bracket, 0.39” (10 mm)
4
2508.200
Wall mounting bracket, 1.57” (40 mm)
4
2503.200
Gland plate with brush insert
1
7705.035
Gland plate for metric cable glands
1
7705.235
Slide Rails
10
2250.000
C rails
4
2238.000
Blanking panels, 19” (482.6 mm)
3
see page 107
24
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
EL 2-part enclosure
Grounding Page 95
Surface finish:
− Enclosure and swing frame:
Primed and powder-coated
− Front door: Anodized
Protection rating:
IP 55 to IEC 60 529, UL listed
Supply includes:
− Enclosure
− Front door
− Swing frame, 19” (482.6 mm)
fitted
− Assembly parts
T1
B1
B2
T3
H1
Color:
− Enclosure and swing frame:
RAL 7035
− Front door: Silver
T2
H2
Material:
− Enclosure: Carbon steel,
16 ga (1.5 mm)
− Swing frame: carbon steel
− Front door: Extruded aluminum
section, acrylic glazing, 3.0 mm
Detailed drawings:
Available at www.rittal.us
Depth: 15” (369 mm), with swing frame
Packs of
6U
11 U
14 U
Height (H1) inches (mm)
15 (380)
24 (600)
30 (760)
Width (B1) inches (mm)
24 (600)
24 (600)
24 (600)
Depth (T1) inches (mm)
15 (369)
15 (369)
15 (369)
Clearance width (B2) inches (mm)
21 (537)
21 (537)
21 (537)
Clearance height (H2) inches (mm)
Distance from viewing door to swing frame (T2) inches (mm)
Maximum installation depth (T3) inches (mm)
Part No.
1
12 (317)
21 (537)
27 (697)
3 – 4 (67 – 97)
3 – 4 (67 – 97)
3 – 4 (67 – 97)
11 (270)
11 (270)
11 (270)
1919.500
1920.500
1926.500
Accessories
Wall mounting bracket, 0.39” (10 mm)
2508.200
Wall mounting bracket, 1.57” (40 mm)
2503.200
Gland plates for metric cable glands
2563.010
Blanking panels, 19” (482.6 mm)
see page 107
Cable management panel, 19” (482.6 mm), 1 U,
5 cable cable guide rings 1.57 x 1.97” (40 x 50 mm)
7257.200
Standard swing frame with double-bit lock insert may be exchanged for 27 mm lock inserts, type A.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
25
AE enclosure with 19” (482.6 mm) mounting rails
Captive Nuts Page 87
Material:
Enclosure: Carbon steel
Surface finish:
− Enclosure: Powder-coated
− Mounting rails: Zinc-plated
Color:
RAL 7035
Supply includes:
− Enclosure with hinged door
− Interchangeable door hinge
− Cam lock and double-bit
insert
− Gland plate with brush strip
for cable entry in the enclosure
base
− Part number specific
configuration, see table
Protection rating:
IP 55 to IEC 60 529
UL
CSA
With 19” (482.6 mm) mounting rails
8U
13 U
16 U
Height inches (mm)
Packs of
15 (380)
24 (600)
30 (760)
Width inches (mm)
24 (600)
24 (600)
24 (600)
Depth inches (mm)
14 (350)
14 (350)
14 (350)
Max. installation depth inches (mm)
12 (310)
12 (310)
12 (310)
Protection rating with gland plate for cable gland
IP 55 to IEC 60 529
Mounting rails, 19” (482.6 mm), fully depth adjustable
2
C rail, for cable clamping on the rear panel
1
Metal bracket for optional accommodation of a ground rail
or 19” (482.6 mm) socket strip
1
Cam locks
4
Part No.
1
1x
2x
2x
7641.000
7643.000
7645.000
Size
5
5
5
Qty.
1
1
1
Accessories
Gland plates in various versions
Wall mounting bracket, 0.39” (10 mm)
4
2508.200
Wall mounting bracket, 1.57” (40 mm)
4
2503.200
Wall mounting bracket for external mounting
4
Viewing door, 1.3" (34 mm) profile depth
1
Viewing door, 2.4" (60 mm) profile depth
1
2761.000
Component shelf 2 U, static installation, 10” (250 mm) deep
1
7119.250
Ground rail
1
7113.000
26
2508.100
2730.000
Metric measurements for are exact, imperial measurements are rounded
2731.000
2732.000
Make IT easy: Enclosure, power and cooling solutions
AE enclosure with 19” (482.6 mm) pull-out frame
Captive Nuts Page 87
Supply includes:
− Enclosure with hinged door
− Cam lock and double-bit insert
− Gland plate with brush strip
for cable entry in the enclosure
base
60
0
600
Protection rating:
IP 54 to IEC 60 529
0
35
0
21
525
Surface finish:
− Enclosure: Powder-coated
− Pull-out frame: Stainless steel
Color:
RAL 7035
450
Material:
− Enclosure: Carbon steel
− Viewing window: Single-pane
safety glass, 0.12” (3.0 mm)
52
0
With 19” (482.6 mm) pull-out frame
Height inches (mm)
Packs of
24 (600)
Width inches (mm)
24 (600)
Depth inches (mm)
14 (350)
L/h door hinge
Cam locks
2
Side installation, vertical
4U
Front installation, vertical and horizontal
10 U
Protection rating with gland plate for cable gland
IP 54 to IEC 60 529
Pull-out frame attached to telescopic slides
1
Outlet filter in enclosure base and on left-hand side
2
Viewing window on right-hand side
1
Cable clamp rail on rear wall
1
Additional cable clamp rail for mounting on the pull-out frame
1
Part No.
7644.000
Accessories
Choice of gland plates
Size
5
Qty.
1
Wall mounting bracket, 0.39” (10 mm)
4
2508.200
Wall mounting bracket for external mounting
4
2508.100
Wall mounting bracket, 1.57” (40 mm)
4
2503.200
Shelf
1
7644.4001)
Component shelf, 1 U, 6” (140 mm) deep
1
7119.140
Ground rail, horizontal
1
7113.000
Fan expansion kit 230 V AC (only for use at the bottom)
1 set
7980.100
Fan expansion kit 48 V DC (only for use at the bottom)
1 set
7980.148
5
3322.700
Spare filter mats
1)
Extended delivery times.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
27
UPS – Power Modular Concept
Battery Packs Page 29
Double conversion technology
to the highest classification
VFI-SS-111.
Supply includes:
− Single-phase UPS system
− Operating manual
− Software on CD-ROM
− RS232 cable
− For 1 – 3 kVA: UPS, groundingpin connection cable, USB cable
Technical information:
Available at www.rittal.us
Photo shows a configuration with
equipment not included in the
base part number
PMC 12, single-phase, output range 1 – 12 kVA n+1
UPS with integral internal hot swap-compatible batteries
UPS
Part No.
9978.416
9978.417
Width x height
26 (650)
26 (650)
16 (405)
26 (650)
26 (650)
64 (29)
64 (29)
34.6 (15.7)
64 (29)
64 (29)
VA
1000
2000
3000
1000
2000
3000
Watts
800
1600
2400
800
1600
2400
Max. heat loss (W)
105
210
252
105
210
252
110 V (60 – 144 V)
230 V (160 – 288 V)
Frequency
50/60 Hz ±5%
Power factor
Voltage
> 0.99 with linear load
110 V ≤ ±1% (100/110/115/120/127 V adjustable)
Frequency, synchronised
Efficiency, AC mode
230 V ≤ ±1% (200/208/220/230/240 V adjustable)
±1 Hz
85%
85%
88%
Power factor
Battery
5 years EUROBAT
Autonomy at 100% load
≥ 7 min.
≥ 7 min.
≥ 5 min.
Operating systems supported
Output connection
EMC
Labelling
≥ 7 min.
≥ 7 min.
≥ 5 min.
Windows, Unix, Linux, Novell, Apple
Included
110 V, 10 A C14
110 V,
6 x 5-15R
110 V,
2 x 5-15R,
2 x 5-20R
Power
Standards and
certifications
90%
Optional network monitoring card 7857.420/relay card 7857.410
Emergency Power Off (EPO)
Connection
88%
1 x USB, 1 x RS232
SNMP
Input connection
88%
0.8
Interface
Communication
7857.432
16 (405)
Rated voltage
Output
7857.431
34.6 (15.7)
Weight lbs (kg)
Input
7857.430
19” x 2 U (440 mm x 88 mm)
Depth inches (mm)
Power
9978.418
110 V, 16 A C20
230 V, 10 A C14
230 V, 16 A C20
110 V,
4 x 5-15R,
1 x L5-30R
230 V, 6 x 10 A, C13,
2 units switched
230 V, 4 x 10
A, C13, 2 units
switched,
1 x 16 A, C19
IEC/EN 62 040-3
EN 50 091-2/EN 62 040-2 class A, EN 61 000-4-2/-3/-4/-6-8/-11, EN 61 000-3-2/-3
UL, cUL, FCC
CE, FCC
Accessories
Battery pack PMC 12
28
see page 29
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
UPS – Power Modular Concept
Accessories
Battery packs
To operate or increase the power of PMC 12 UPS
systems. With overload protection. Vertical siting
is also possible. Battery packs are “hot plug”compatible (replacement of batteries while
operational). Batteries can be exchanged from the
front, without removing the battery pack from the
19" (482.6 mm) rails. Depending on the UPS
version, 2 – 3 battery packs may be connected
together to increase the autonomy. Cooling of the
UPS and the battery packs is absolutely essential.
Material:
Maintenance-free lead gel accumulators, service
life 5 years (to EUROBAT)
Supply includes:
− Fully preassembled and populated with
accumulators (12 V/7 Ah)
− 20" (500 mm) connection cable with connector
− Feet
Note:
For mounting in the 19" (482.6 mm) rack,
a slide rail 7063.883 is required.
Battery packs:
UPS PMC 12 system
(UL,cUL, FCC)
9978.416
9978.417
9978.418
UPS PMC 12 system
(CE, FCC)
7857.430
7857.431
7857.432
Part No. (UL)
9979.457
9979.458
9979.458
Part No. (CE)
7857.435
7857.437
7857.437
Height U (mm)
2 U (89)
2 U (89)
2 U (89)
Width inches (mm)
18 (465)
18 (465)
18 (465)
Depth inches (mm)
26 (650)
26 (650)
26 (650)
Weight lbs (kg)
44 (20)
44 (20)
44 (20)
6
6
6
In supplied
state
1
2
1 kVA
7 min.
28 min.
55 min.
2 kVA
7 min.
17 min.
29 min.
3 kVA
5 min.
12 min.
20 min.
Qty.
Autonomy (min.) at 100% load:
UPS type
Mechanical
maintenance bypass
Battery packs
Part No.
for PMC 12
Facilitates uninterrupted removal/maintenance of
the UPS. Connection of the bypass for 1 – 3 kVA
UPS models is via a connector (Plug & Play). It is
important to ensure the correct prefuse of the UPS
bypass depending on the UPS power used.
1 – 3 kVA
(incl. UPS fuse 16 A)
7857.440
Dimensions:
W x H x D − U/inch (mm):
− 2 U x 19 x 3 (88 x 465 x 80)
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
29
UPS – Power Modular Concept
Accessories
Relay card
for PMC 12
This card allows the UPS alarm messages (5 UPS
alarms) to be forwarded to external indicator
devices (e.g. building services management)
via floating contacts. The card is plugged into the
extension slot on the rear of the PMC 12 UPS.
Packs of
Part No.
1
7857.410
Note:
Cannot be used together with the SNMP card.
UPS monitoring card
(SNMP card)
This optional monitoring card facilitates monitoring
of the UPS via Web browsers. In this way,
various monitoring states of the UPS (e.g. input
voltage, output currents/power per phase, battery
charging status, autonomies etc.) may be
remotely monitored. However, the main
application is a controlled server shutdown via the
network interface.
30
Design
Packs of
Part No.
SNMP card, budget version
1
7857.420
SNMP card CS121
with switching contacts
1
7857.366
Note:
Only one extension card may be installed per UPS
system. Redundant monitoring solutions for UPS
systems available on request.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Three phase modular UPS
Extended Battery Module Page 32 Rack Power Module Page 32
Designed specifically for highdensity computing environments,
the modular UPS delivers 12 kW of
efficient, reliable power in only 6 U
of rack space, including batteries.
Expand capacity by combining
12 kW modules in a building
block fashion to deliver 60 kW of
redundant backup power from a
single rack enclosure.
The standard internal batteries
provide needed ride-through
power until an auxiliary power
source takes over or systems
are gracefully shut down. Extend
runtime up to 34 minutes at full
load (or 76 minutes at half load)
with Extended Battery Modules
(see page 32).
Version
Features
– Conserves rack space with 12
kW of power in 6U of rack height,
including batteries
– Enables building-block upgrades
from 12 kW to 60 kW in a single
rack enclosure
– Simplifies installation and
service with true plug-and-power
connections and hot-swappable
batteries and electronics
modules
– Increases battery life through
ABM® technology, resulting in
more uptime and fewer battery
replacements
Stand Alone
Modular
Height U (mm)
6 U (267)
6 U (267)
Width inches (mm)
17 (442)
17 (442)
Depth inches (mm)
26 (660)
26 (660)
Weight lbs (kg)
307 (140)
307 (140)
Part No.
9971.057
9971.056
Capacity
12 kW
Efficiency
Up to 97%
Heat Dissipation
371W at 100%
Input Voltage
208 Vac
Voltage Range
180 to 265 Vac
Frequency Range
50 or 60 Hz ± 5 Hz
Input Requirements
Three-phase, four wire + ground
Rated Output Voltage
208V model: 180 ti 225 Vac, Ph to Ph
Certifications
UL 1778, cUL
Accessories
Top Entry Bus Bar
–
9963.616
Bottom Entry Bus Bar
–
9963.617
Universal Wireway
–
9963.618
Rittal Rack Power Module (RPM)
9961.453
SNMP Card
9970.882
Extended Battery Modules
(Max of 4 per UPS module)
9971.058
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
31
Three phase modular UPS
Accessories
Extended Battery Module, 3 U
Connect to UPS using Anderson Connector. Up
to four units can be connected together to extend
runtime.
Packs of
Part No.
1
9971.058
Color:
RAL 9005
Modular UPS Typical Battery Runtime (In Minutes)
Single Module
Internal Battery
+ 1 EBMs
+ 2 EBMs
+ 3 EBMs
+ 4 EBMs
13%
55
118
183
253
329
2.4
20%
37
78.3
119
163
211
4
33%
23
46
69
94
120
6
50%
13
30
44
59
76
Load kW
Load %
1.6
8
67%
9
21
32
43
54
9.6
80%
6.9
17
26
34
44
12
100%
4.8
12
20
27
34
Modular UPS Typical Battery Runtime (Parallel UPS, In Minutes)
Number
of UPS
Modules
Total Load
kW
Configuration
Internal
Battery
+ 1 EBMs
+ 2 EBMs
+ 3 EBMs
+ 4 EBMs
6
60
N+1
6
15
22
29
37
5
48
N+1
6.9
17
26
34
44
4
36
N+1
18
28
37
47
47
3
24
N+1
9
21
32
43
54
2
12
N+1
13
30
44
59
76
Rack Power Module, 3 U
Delivers output power of the modular UPS with
configurable input connections, output receptacle
plates, metering choices, and surge suppression.
Packs of
Part No.
1
9961.453
Color:
RAL 9005
Product selection:
– Choose from one of four input connectors
– Select a power cord
– Choose two output receptacle plates from the
table below
Output
Receptacle
Voltage
Connector Amps
Output Amps
Max kW Output
Per Receptacle
Receptacles
Per Plate
NEMA L21-20R
208
20
16
5.8
2
NEMA L21-30R
208
30
24
8.6
2
NEMA L6-15R
208
15
12
2.5
3
NEMA L6-20R
208
20
16
3.3
3
NEMA L6-30R
208
30
24
5.0
3
NEMA 5-15R
120
15
12
1.4
6
NEMA 5-20R
120
20
16
1.9
6
NEMA L14-20R
208
20
16
3.3
3
NEMA L14-30R
208
30
24
5.0
3
IEC320-C131)
208
15
12
2.5
12
IEC320-C192)
208
20
16
3.3
6
Four C13 receptacles installed on each 15A breaker. Total capacity of each breaker is 2.5 kW.
Do not exceed maximum breaker rating when powering multiple loads.
2)
Two C19 receptacles installed on each 20A breaker. Total capacity of each breaker is 3.3 kW.
Do not exceed maximum breaker rating when powering multiple loads.
1)
32
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Basic PDU
Button Mount Bracket Page 39
– Reliable power distribution
for equipment racks and other
data center applications by
offering different input and output
connections to distribute 110V
or 208V power and 20 or 30 Amp
power input feed
1)
– Criteria for Branch Circuit
Protection is met by the use of
UL-listed fuses or breakers,
with 30 Amp models featuring
a combination of white and
black outlets to easily distinguish
between each branch circuit
Voltage
Amps
Receptacles
No. of
receptacles
Plug
Over current
protection
Orientation
H xW x D
inches (mm)
Part No.
120V
20
5-20
12
C20
–
1U
1.75 x 17 x 2.25
(44 x 482 x 57)
9970.8431)
120V
20
5-20
24
C20
–
0U
31.25 x 1.75 x 2.25
(794 x 44 x 57)
9970.8471)
120V
30
5-20
12
L5-30
Fuse
1U
1.75 x 17 x 2.25
(44 x 482 x 57)
9970.844
120V
30
5-20
24
L5-30
Fuse
0U
31.25 x 1.75 x 2.25
(794 x 44 x 57)
9970.848
208V
20
C13
12
C20
–
1U
1.75 x 17 x 2.25
(44 x 482 x 57)
9970.8451)
208V
20
C13
24
C20
Breaker
0U
34 x 1.75 x 3.5
(864 x 44 x 89)
9978.4401)
208V
30
C13
12
L6-30
Fuse
1U
1.75 x 17 x 2.25
(44 x 482 x 57)
9970.846
208V
30
C13
24
L6-30
Breaker
0U
34 x 1.75 x 3.5
(864 x 44 x 89)
9978.441
Input power cord sold separately, see page 39.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
33
Metered PDU
Button Mount Bracket Page 39
– Reliable power distribution for
all the devices in your equipment
cabinet, from 2,000 to 6,000
Watts
– Local input current monitoring
allows the installation engineer
to verify the combined load on
the circuit
– Metered units are available in
20 or 30 Amps, 120 or 208 Volts
single-phase
1)
34
Voltage
Amps
Receptacles
No. of
receptacles
Plug
Over current
protection
Orientation
H xW x D
inches (mm)
Part No.
120V
20
5-20
10
C20
–
1U
1.75 x 17 x 5
(44 x 432 x 127)
9963.6781)
120V
20
5-20
12
C20
Fuse
0U
31.25 x 1.75 x 2.25
(794 x 44 x 57)
9963.6701)
120V
20
5-20
24
C20
Fuse
0U
54 x 1.75 x 2.25
(1372 x 44 x 57)
9963.6741)
120V
30
5-20
10
L5-30
Fuse
1U
1.75 x 17 x 5
(44 x 432 x 127)
9963.679
120V
30
5-20
12
L5-30
Fuse
0U
31.25 x 1.75 x 2.25
(794 x 44 x 57)
9963.671
120V
30
5-20
24
L5-30
Fuse
0U
54 x 1.75 x 2.25
(1372 x 44 x 57)
9963.675
208V
20
C13
12
C20
–
1U
1.75 x 17 x 5
(44 x 432 x 127)
9963.6801)
208V
20
C13
12
C20
Fuse
0U
31.25 x 1.75 x 2.25
(794 x 44 x 57)
9963.6721)
208V
20
C13, C19
24, 6
C20
Breaker
0U
54.1 x 1.75 x 3.38
(1374 x 44 x 86)
9978.4421)
208V
30
C13
12
L6-30
Fuse
1U
1.75 x 17 x 5
(44 x 432 x 127)
9963.681
208V
30
C13
24
L6-30
Fuse
1U
1.75 x 17 x 5
(44 x 432 x 127)
9978.444
208V
30
C13
12
L6-30
Fuse
0U
31.25 x 1.75 x 2.25
(794 x 44 x 57)
9963.673
208V
30
C13, C19
24, 6
L6-30
Breaker
0U
54.1 x 1.75 x 3.38
(1374 x 44 x 86)
9978.443
Input power cord sold separately, see page 39.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Smart PDU
Button Mount Bracket Page 39
– Reliable power distribution
combined with remote power
and environmental monitoring
for 4,000 to 20,000 Watts
– Available in 20, 30, 50, or
60 Amps, 120 or 208 Volts
single-phase, 208 Volts
three-phase
– Use the network interface to
view power, temperature and
humidity levels via a web
browser, or receive SNMP-based
1)
alarms when conditions exceed
defined thresholds
– PIPS PDUs provide power
monitoring per inlet/infeed
and includes current, voltage,
power, apparent power, crest
factor, reactance, power factor
and accumulated energy
– Replaces branch circuit
monitoring devices typically
installed in the power distribution
panel or remote power panel
(RPP) with higher accuracy and
lower cost monitoring of each
circuit attached to the PDU
Voltage
Amps
Receptacles
No. of
receptacles
Plug
Over current
protection
Orientation
H xW x D
inches (mm)
Master/
Expansion
Part No.
208V
20
C13, C19
24, 6
C20
Breaker
0U
60 x 1.75 x 3.38
(1524 x 44 x 86)
Master
9978.4461) 2)
208V
20
C13, C19
24, 6
C20
Breaker
0U
60 x 1.75 x 3.38
(1524 x 44 x 86)
Expansion
9978.4451) 2)
208V
30
C13, C19
24, 6
L6-30
Breaker
0U
60 x 1.75 x 3.38
(1524 x 44 x 86)
Master
9978.4481)
208V
30
C13, C19
24, 6
L6-30
Breaker
0U
60 x 1.75 x 3.38
(1524 x 44 x 86)
Expansion
9978.4471)
208 3P Delta
30
C13
24
L15-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9971.1041)
208 3P Delta
30
C13
24
L15-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9971.1051)
208 3P Delta
50
C13, C19
12, 12
Cord set
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9978.450
208 3P Delta
50
C13, C19
12, 12
Cord set
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9978.449
208V 3P Delta
50
L6-30
6
Cord set
Breaker
2U
3.5 x 17 x 10
(89 x 432 x 254)
Master
9978.452
208V 3P Delta
50
L6-30
6
Cord set
Breaker
2U
3.5 x 17 x 10
(89 x 432 x 254)
Expansion
9978.451
208V 3P Delta
60
L6-30
6
Cord set
Breaker
2U
3.5 x 17 x 10
(89 x 432 x 254)
Master
9978.459
208V 3P Delta
60
L6-30
6
Cord set
Breaker
2U
3.5 x 17 x 10
(89 x 432 x 254)
Expansion
9978.457
208 3P Delta
60
C13, C19
12, 12
Cord set
Breaker
0U
69 x 1.75 x 3.5
(1524 x 44 x 89)
Master
9978.455
208 3P Delta
60
C13, C19
12, 12
Cord set
Breaker
0U
69 x 1.75 x 3.5
(1524 x 44 x 89)
Expansion
9978.453
208 3P Wye
20
5-20, C13, C19
12, 9, 9
L21-20
Breaker
0U
68 x 2 x 3.23
(1728 x 51 x 82)
Master
9971.112
Includes PIPS
2)
Input power cord sold separately, see page 39.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
35
Smart PDU (cont.)
Voltage
Amps
Receptacles
No. of
receptacles
Plug
Over current
protection
Orientation
H xW x H
inches (mm)
Master/
Expansion
Part No.
208 3P Wye
20
5-20, C13, C19
12, 9, 9
L21-20
Breaker
0U
68 x 2 x 3.23
(1728 x 51 x 82)
Expansion
9971.113
208 3P Wye
30
5-20, C13, C19
12, 9, 9
L21-30
Breaker
0U
68 x 2 x 3.23
(1728 x 51 x 82)
Master
9971.110
208 3P Wye
30
5-20, C13, C19
12, 9, 9
L21-30
Breaker
0U
68 x 2 x 3.23
(1728 x 51 x 82)
Expansion
9971.111
208 3P Wye
30
C13
24
L21-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9971.106
208 3P Wye
30
C13
24
L21-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9971.107
208 3P Wye
60
C13, C19
12, 12
Cord set
Breaker
0U
69 x 1.75 x 3.5
(1524 x 44 x 89)
Master
9978.456
208 3P Wye
60
C13, C19
12, 12
Cord set
Breaker
0U
69 x 1.75 x 3.5
(1524 x 44 x 89)
Expansion
9978.454
208 3P Wye
60
L6-30
6
Cord set
Breaker
2U
3.5 x 17 x 10
(89 x 432 x 254)
Master
9978.460
208 3P Wye
60
L6-30
6
Cord set
Breaker
2U
3.5 x 17 x 10
(89 x 432 x 254)
Expansion
9978.458
415
20
C13
24
IEC Red 6Hr
3P+N+G
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9978.462
415
20
C13
24
IEC Red 6Hr
3P+N+G
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9978.461
415
30
C13
24
L22-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9978.464
415
30
C13
24
L22-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9978.463
36
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Switched PDU
Button Mount Bracket Page 39
– Switched PDU provide remote
monitoring and management,
including reboot commands for
connected servers and network
equipment
– Complete lights-out management
of a data center and remote
branch office
– Combine remote configuration
and management with power
distribution and power and
environmental monitoring
– Includes ability to reboot a single
or dual-power server with one
1)
2)
command, receive SNMP alerts
when power or environmental
conditions exceed thresholds,
and assign users specific
access rights to designated
outlets or groups
– Provides the flexibility needed for
all data centers and remote sites,
including power requirements
for high-amperage, high-voltage;
branch circuit protection; SSL &
SSH security; and SNMP-based
input current monitoring
– PIPS (Per Inlet Power
Sensing) PDUs provide
power monitoring per inlet/
infeed including current, voltage,
power, apparent power, crest
factor, reactance, power factor
and accumulated energy. This
information replaces branch
circuit monitoring devices
typically installed in the power
distribution panel or remote
power panel (RPP) with
higher accuracy and lower cost
monitoring of each circuit
attached to the PDU
– POPS (Per Outlet Power
Sensing) PDUs provide
information per individual outlet,
including current load (A),
voltage (V), power (kW),
apparent power (VA), crest
factor, and power factor. Using
our grouping technology, power
information is available per
device, groups of devices
(application), individual PDU or
the entire cabinet
Voltage
Amps
Receptacles
No. of
receptacles
Plug
Over current
protection
Orientation
H xW x D
inches (mm)
Master/
Expansion
Part No.
208-240V
30
C13
8
L6-30
Fuse
0U
64 x 1.75 x 3.5
(1626 x 44 x 89)
Master
9978.472
208-240V
30
C13
8
L6-30
Fuse
0U
64 x 1.75 x 3.5
(1626 x 44 x 89)
Expansion
9978.471
208-240V
30
C13
16
L6-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9978.4681)
208-240V
30
C13
16
L6-30
Fuse
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9978.4651)
208-240V
30
C13
24
L6-30
Breaker
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9978.4691)
208-240V
30
C13
24
L6-30
Breaker
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9978.4661)
208-240V
30
C13, C19
18, 6
L6-30
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9978.4702)
208-240V
30
C13, C19
18, 6
L6-30
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9978.4672)
208V 3P Delta
20
C13
24
L15-20
Fuse
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9970.773
208V 3P Delta
20
C13
24
L15-20
Fuse
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9970.774
208V 3P Delta
30
C13
24
L15-30
Fuse
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Master
9970.777
208V 3P Delta
30
C13
24
L15-30
Fuse
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Expansion
9970.778
Includes PIPS
Includes PIPS/POPS
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
37
Switched PDU
2)
38
Voltage
Amps
Receptacles
No. of
receptacles
Plug
Over current
protection
Orientation
H xW x H
inches (mm)
Master/
Expansion
Part No.
208V 3P Delta
30
C13, C19
18, 6
L15-30
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9978.4752)
208V 3P Delta
30
C13, C19
18, 6
L15-30
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9978.4732)
208V 3P Delta
50
C13, C19
12, 12
CS8365C
Breaker
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Master
9978.479
208V 3P Delta
50
C13, C19
12, 12
CS8365C
Breaker
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Expansion
9978.477
208V 3P Delta
50
C13
48
Cord Set
Breaker
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9978.480
208V 3P Delta
50
C13
48
Cord Set
Breaker
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9978.478
208V 3P Delta
60
C13, C19
12, 12
IEC Blue 9hr
3P+G
Breaker
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Master
9978.487
208V 3P Delta
60
C13, C19
12, 12
IEC Blue 9hr
3P+G
Breaker
0U
69 x 1.75 x 2.25
(1753 x 44 x 57)
Expansion
9978.481
208V 3P Delta
60
C13
48
Cord Set
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9978.489
208V 3P Delta
60
C13
48
Cord Set
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9978.483
208V 3P Wye
20
C13
24
L21-20
Fuse
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9970.771
208V 3P Wye
20
C13
24
L21-20
Fuse
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9970.772
208V 3P Wye
30
C13
24
L21-30
Fuse
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Master
9970.775
208V 3P Wye
30
C13
24
L21-30
Fuse
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Expansion
9970.776
208V 3P Wye
30
C13, C19
18, 6
L21-30
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9978.4762)
208V 3P Wye
30
C13, C19
18, 6
L21-30
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9978.4742)
208V 3P Wye
60
C13, C19
12, 12
IEC Blue 9hr
3P+N+G
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Master
9978.488
208V 3P Wye
60
C13, C19
12, 12
IEC Blue 9hr
3P+N+G
Breaker
0U
69 x 1.75 x 3.5
(1753 x 44 x 89)
Expansion
9978.482
208V 3P Wye
60
C13
48
Cord Set
Breaker
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Master
9978.490
208V 3P Wye
60
C13
48
Cord Set
Breaker
0U
69 x 3.5 x 3.5
(1753 x 89 x 89)
Expansion
9978.486
Includes PIPS/POPS
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Power Distribution Unit
Accessories
Temperature/Humidity Sensor
118" (3000 mm) cord with temperature and
humidity probe. Plugs into a Smart/Switched
Master PDU.
Power Cord
for 20 Amp PDUs
Equipment Power Cord
For connection of server to PDU
Button mount bracket
– Enables tool-less installation of PDUs
– Allow 0 U mounting of PDUs
– Black, E-coated
Make IT easy: Enclosure, power and cooling solutions
Cable length
inches (mm)
Packs
of
Part No.
118 (3000)
1
9970.815
Receptacles
Length
inches (mm)
Packs
of
Part No.
C19/L6-20P
177 (4500)
1
9970.811
C19/L5-20P
98 (2500)
1
9970.812
C19/5-20P
98 (2500)
1
9970.813
C19/5-15P
118 (3000)
1
9970.814
Receptacles
Length
inches (mm)
Packs
of
Part No.
C13/C13
79 (2000)
8
9970.816
Description
Packs
of
Part No.
0 U, dual recessed
button mount bracket
2
9963.800
Metric measurements for are exact, imperial measurements are rounded
39
TopTherm LCP Rack CW and DX
TS IT Enclosures Page 10
Benefits:
– Maximum energy efficiency
thanks to EC fan technology
and IT-based control
– Minimal pressure loss at the
air end, which in turn minimizes
the power consumption of the
fans
– Optimum adaptability thanks
to dynamic, continuous control
of the cold water volume flow
– By using high water inlet
temperatures, the proportion
of indirect free cooling is
increased, which in turn
reduces operating costs
– Thanks to six modular,
box-type plug-in fan units,
the cooling output can be
adapted to actual requirements
– The box-type plug-in fan units
are configurable as n+1
redundancy
– Standard 3-phase connection
for electrical redundancy
– With redundant temperature
sensor integrated at the air
end as standard
– The separation of cooling and
rack prevents water from
penetrating the server enclosure
– Up to 60 kW cooling output on
a footprint of just 4 ft2 (0.36 m2)
– The low weight means a minimal
load area
– Optional touchscreen display
Monitoring of all system-relevant
parameters such as:
– Server air intake temperature
– Server waste air temperature
– Water inlet/return temperature
– Water flow
– Cooling output
– Fan speed
– Leakage
– Optional sensors
– Direct connection of the unit
via SNMP/Ethernet
– Integration into RiZone
Application and mode of
operation:
The LCP draws in the hot air at the
sides at the rear of the server
enclosures, cools it using high
performance compact impellers,
and blows the cooled air
back into the front part of the
server enclosure at the sides.
Protection rating:
IP 40 to IEC 60 529,
UL listed
Color:
RAL 9005, RAL 7035
TopTherm LCP Rack CW and DX
Design
CW
CW
CW
Water
Cooling medium
DX
Refrigerant R410a
Part No. RAL 7035
–
–
–
3311.110
Part No. RAL 9005
3311.135
3311.235
3311.265
–
Rated operating voltage V, Hz
Dimensions inches (mm)
230, 1~, 50/60, 400, 3~, 50/60
HxWxD
Usable U
Typical cooling output BTU (kW)
79 x 12 x 40
(2000 x 300 x 1000)
79 x 12 x 48
(2000 x 300 x 1200)
79 x 12 x 48
(2000 x 300 x 1200)
79 x 12 x 48
(2000 x 300 x 1200)
42
42
42
42
Up to 102364 (30)
Up to 102364 (30)
Up to 204728 (60)
Up to 34121 (10)
Duty cycle
100%
Electrical connection
Connection cable
Linear fan control
Temperature control
Two way control valve
–
Fans may be exchanged with the system operational
EC fan
Also required
Packs of
Condenser unit
1
–
–
–
3311.310
5510.220
5510.220
Accessories
Fan module, RAL 9005
1
9967.527
Touchscreen display, colored
1
3311.030
Connection hose, top/bottom
1
3311.040
LCP enclosure
1
40
5508.220
5510.220
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
TopTherm LCP Inline CW and DX
TS IT Enclosures Page 12
Benefits:
– Maximum energy efficiency
thanks to EC fan technology
and IT-based control
– Minimal pressure loss at the
air end, which minimizes the
power consumption of the fans
– Optimum adaptability from
dynamic, continuous control
of the cold water volume flow
– By using high water inlet
temperatures, the proportion
of indirect free cooling is
increased, which in turn
reduces operating costs
– Thanks to six modular, box-type
plug-in fan units, the cooling
output can be adapted to actual
requirements
– The box-type plug-in fan units
are configurable as n+1
redundancy
– Standard 3-phase connection
for electrical redundancy
– With redundant temperature
sensor integrated at the air end
as standard
– The separation of cooling and
rack prevents water from
penetrating the server enclosure
– Up to 60 kW cooling output on
a footprint of just 0.36 m2
– The low weight means a minimal
load area
– Touchscreen display may be
retrofitted
Monitoring of all system-relevant
parameters such as:
– Server air intake temperature
– Server waste air temperature
– Water inlet/return temperature
– Water flow
– Cooling output
– Fan speed
– Leakage
– Optional sensors
– Direct connection of the unit via
SNMP/Ethernet
– Integration into RiZone
Protection rating LCP CW:
IP 40 to IEC 60 529, UL Listed
Application and mode of
operation:
The LCP is designed for sitting
within a bayed enclosure suite.
The hot air is drawn in from the
room or hot aisle at the rear of
the device and expelled at the
front into the cold aisle after
cooling. The LCP achieves
maximum performance and
efficiency in conjunction with Rittal
cold aisle containment (see page
106). With this product a raised
floor is not necessary.
Color:
RAL 9005
TopTherm LCP Inline CW and DX
Design
CW
CW
CW
DX
Water
Cooling medum
Refrigerant R410a
Part No. RAL 7035
–
–
–
3311.210
Part No. RAL 9005
3311.535
3311.565
3311.545
–
Rated operating voltage V, Hz
Dimensions inches (mm)
230, 1~, 50/60, 400, 3~, 50/60
HxWxD
Usable U
Typical cooling output BTU (kW)
79 x 12 x 48
(2000 x 300 x 1200)
79 x 12 x 48
(2000 x 300 x 1200)
79 x 12 x 48
(2000 x 300 x 1200)
79 x 12 x 48
(2000 x 300 x 1200)
42
42
42
42
Up to 102364 (30)
Up to 204728 (60)
Up to 102364 (30)
Up to 34121 (10)
Front alignment
Protruding
Flush
Duty cycle
100%
Electrical connection
Connection cable
Linear fan control
Temperature control
Two-way control valve
–
Fans may be exchanged with the system operational
EC fan
Also required
Packs of
Condenser unit
1
–
–
–
3311.310
Accessories
Rear adaptor, RAL 9005
1
9967.529
9967.529
–
–
Fan module, RAL 9005
1
9967.527
9967.527
9967.530
9967.527
Touchscreen display, colored
1
3311.030
3311.030
3311.030
3311.030
Connection hose, top/bottom
1
3311.040
3311.030
3311.030
3311.030
LCP enclosure
1
5510.210
5510.210
5510.210
5510.110
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
41
TopTherm LCP T3+ CW
TS IT Enclosures Page 12
Benefits:
– Error-tolerant, efficient cooling
of server racks with high thermal
loads
– Fully redundant – Two active
cooling circuits and two
switchable power circuits
ensure optimum fail-safeness
– The built-in controllers are
capable of adapting all device
parameters automatically to
preserve the required climate
conditions
– A separate decentralized
intelligence which automatically
recognizes emergency
situations and responds
appropriately with the “auto
load balancing” and “auto
recovery” functions
– Interfaces which facilitate
user-friendly operation and
monitoring via the network or
BSM systems
Optional:
− Fully integrated fire detection
and extinguisher system
− Automatic server enclosure
door opening
− Various sensors
Protection rating:
IP 40 to IEC 60 529
Color:
RAL 7035
Application and mode of
operation:
The LCP draws in the air at the
sides at the rear of the server
enclosures, cools it using high
performance compact impellers,
and blows the cooled air
back into the front part of the
server enclosures at the sides.
TopTherm LCP T3+ CW
Water
Cooling medium
Part No.
3311.400
230, 1~, 50/60
400, 3~, 50/60
Rated operating voltage V, Hz
Dimensions inches (mm)
HxWxD
Usable U
79 x 12 x 48
(2000 x 300 x 1200)
42
Useful cooling output, redundant BTU (kW)
Up to 85303 (25)
Duty cycle
100%
Electrical connection
C19/C20
Linear fan control
Temperature control
Two-way control valve
Fans may be exchanged with the system operational
EC fan
Auto-load balancing
Auto-recovery
Accessories
Packs of
Fan module
1
3311.010
Touchscreen display, colored
1
3311.030
Connection hose, top
1
3311.040
LCP enclosure
1
5510.110
42
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
TopTherm LCP Passive CW
TS IT Enclosures Page 10
Benefits:
– High cooling output of 20 kW
in a minimal space
– Easily exchanged for the
standard rear door of the
server enclosure
– Retrofitting is not a problem
– A door opening angle of 120°
allows rear access to the
server enclosure and makes
assembly and configuration
inside the enclosure easier
– The LCP does not require its
own fan, and therefore does
not need an integrated control
– Maximum energy efficiency,
as there is no electrical power
consumption whatsoever
Application and mode of
operation:
Air/water heat exchanger
mechanically integrated into a
rear door for server enclosures.
The 19” (482.6 mm) equipment
built into the server enclosure
must have suitable airflow
capabilities in order to route the
heated waste air through the
heat exchanger rear door. The
waste air is cooled down to room
temperature.
The heat energy absorbed by the
water is transported to the external
cold water supply, where it is
cooled back down to the required
inlet temperature.
Color:
RAL 7035
Note:
RAL 9005 version available upon
request.
TopTherm LCP Passive CW
Part No. RAL 7035
Dimensions inches (mm)
Usable U
Useful cooling output BTU (kW)
Make IT easy: Enclosure, power and cooling solutions
3311.600
HxWxD
79 x 24 x 7 (2000 x 600 x 170)
42
Up to 68242 (20)
Metric measurements for are exact, imperial measurements are rounded
43
Liquid Cooling Package
Accessories
Touchscreen display, color
for LCP rack, inline, T3+
The display offers the opportunity of directly
monitoring key LCP functions and implementing
settings.
Condenser unit
The condenser unit is needed to operate the
refrigerant-based LCPs, and comprises the
external condenser, fan and inverter-controlled
compressor.
Packs of
Part No.
1
3311.030
For LCP
Packs of
Part No.
3311.110, 3311.210
1
3311.310
Refrigerant:
R410a
Vertical shielding
For
enclosure
width
inches (mm)
Packs
of
Part No.
Side panel and
19” (482.6 mm)
rails
24 (600)
1
3301.380
32 (800)
1
3301.390
LCP and
19” (482.6 mm)
rails
24 (600)
1
3301.370
32 (800)
1
3301.320
To block the airflow on the left and right of the
19” (482.6 mm) rails, for enclosure height
79” (2000 mm).
Material:
− Cellular PU foam
− Flame-inhibiting to UL 94 (HF1)
− Length: 75” (1900 mm)
− Self-adhesive on one side
For sealing
between
Connection hose,
bottom and top
Flexible connection hose, may be shortened,
including union nuts on both sides for connecting
the LCP to existing pipe work.
Assembly
Thread
Pre assembled
Field assembled
Field assembled
Field assembled
44
Length ft (mm)
Water connection from
Packs of
10 (3048)
1½”
10 (3048)
15 (4572)
Part No.
3311.040
Top/bottom
25 (7620)
Metric measurements for are exact, imperial measurements are rounded
2
9971.173
9971.174
9971.175
Make IT easy: Enclosure, power and cooling solutions
Liquid Cooling Package
Accessories
Add-on cover
For height compensation with 88” (2200 mm) high
racks in conjunction with the 79” (2000 mm) LCP.
Material:
Carbon steel
Depth
inches (mm)
For LCP
Part No.
40 (1000)
3311.130, ....110
9970.164
48 (1200)
3311.235, ....265,
3311.535, ....565,
3311.405, ....215
9970.165
Delivery times available on request.
Surface finish:
Spray-finished
Color:
RAL 9005
Rear adapter
For use with protruding LCP inline units to create
an even rear row.
Fan module
for LCP
To increase the cooling output, individual fan
modules may be retrofitted into the LCPs.
Additional integration can also achieve
redundancy or reduce the electric power
consumption of the LCPs.
For LCP
Packs of
Part No.
3311.535
3311.565
1
9967.529
For LCP
Packs of
Part No.
3311.135, 3311.235,
3311.265, 3311.535,
3311.565
1
9967.527
The LCP 3311.135/.235/.535 (max. 30 kW) is
supplied with one fan module as standard.
To achieve the max. cooling output of 30 kW,
the customer/service needs to install two
additional fan modules.
The LCP 3311.265/.565/.535 (max. 55 kW) is
supplied with four fan modules as standard.
To achieve the max. cooling output of 55 kW,
the customer/service needs to install two
additional fan modules.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
45
Basic Safe
System Accessories Page 67
Benefits:
– Complete system with built-in
climate control
– High level of operational and
service-friendliness thanks to
the two-door system
– Compatibility with other
infrastructure elements
Protection standards:
− Fire protection F90 based on
DIN 4102
− Compliance with limit values
ΔT < 50 K, relative humidity
< 85% for 10 minutes
− Tested burglary protection
WK II EN 1627
− Protection against dust and
water jets IP 55 to IEC 60 529
Color:
Enclosure: RAL 7035
The tests were performed as
system tests and confirmed by
way of test reports.
Photo shows a configuration with
equipment not included in the
base part number
Supply includes:
− Security enclosure with
operating and service doors
(three-point locking)
− Cable entry in both side
elements
− Climate control 2.4 kW
T2
H1
B2
H2
Applications:
– Micro data center for small
businesses
– Protection for servers and
storage applications
– Protection for business-critical
data
– Storage of personal data
T1
B1
15 U
Cooling capacity BTU (kW)
8195 (2.4)
Height (H1) inches (mm)
67 (1699)
Width (B1) inches (mm)
32 (806)
Depth (T1) inches (mm)
50 (1270)
Clearance height (H2) inches (mm)
33 (827)
Clearance width (B2) inches (mm)
24 (620)
Clearance depth (T2) inches (mm)
40 (1024)
Weight excluding internal installation approx. lbs (kg)
792 (360)
Part No. Basic Safe with built-in 19” (482.6 mm) rack
7999.999
Part No. Basic Safe without built-in 19” (482.6 mm) rack
7999.898
Accessories
19" (482.6 mm) rack, 15 U, depth 39” (1000 mm)
7995.992
Early fire detection system EFD Plus
see page 50
Fire alarm and extinguisher system DET-AC Plus
see page 50
CMC monitoring system
see page 54
Standard protection from:
Fire
46
Extinguishing
water
Vandalism
Unauthorized
access
Metric measurements for are exact, imperial measurements are rounded
Dust
Theft/
burglary
Make IT easy: Enclosure, power and cooling solutions
Modular Safe
System Accessories Page 67
Benefits:
– Modular assembly
– Prepared for the installation
of various IT climate control
solutions
– Low weight
– User-friendly, thanks to operator
and service door
Color:
Enclosure: RAL 7035
Supply includes:
− Security safe as a two-door
system
− Cable duct in both side
elements
− Both doors with semi-cylinder
and two locks
− Optional cable routing in
the top element, selectable
positioning
T1
B1
T2
H1
Protection standards:
− Fire protection F90 based on
DIN 4102
− Burglary protection resistance
class II to EN 1627
− Protection against dust and
water jets IP 56 to IEC 60 529
− Protection from acrid gases
to DIN 18 095
H2
Applications:
– Solid protection against
potential physical threats for
IT components
– Targeted configuration
components transform the
safe into a complete, compact
data center
B2
Two-door-system
External dimensions inches (mm)
Internal dimensions inches (mm)
33 U
47 U
Height (H1)
76 (1942)
91 (2321)
Width (B1)
59 (1500)
59 (1500)
Depth (T1)
49 (1238)
49 (1238)
Height (H2)
72 (1840)
87 (2219)
Width (B2)
1)
39 (979)
39 (979)1)
Depth (T2)
40 (1010)
40 (1010)
Clearance height of door opening inches (mm)
66 (1678)
81 (2057)
Part No.
7999.892
7999.893
Accessories
19" (482.6 mm) rack, based on TS 8, 19” (482.6 mm) rails
front and rear, 6 support strips for mounting on the
19” (482.6 mm) rails, 2 system chassis with mounting flanges
H 63 (1600) x W 32 (800) x D 39 (1000)
7831.429
–
H 79 (2000) x W 32 (800) x D 39 (1000)
–
7995.969
H 87 (2200) x W 32 (800) x D 39 (1000)
–
7999.970
Early fire detection system EFD Plus
see page 50
Fire alarm and extinguisher system DET-AC Plus
see page 50
CMC monitoring system
see page 54
1)
With built-in heat exchanger.
Standard protection from:
Fire
Extinguishing
water
Make IT easy: Enclosure, power and cooling solutions
Vandalism
Unauthorized
access
Metric measurements for are exact, imperial measurements are rounded
Dust
Theft/
burglary
47
Modular Safe Extend
System Accessories Page 67
Benefits:
– Modular assembly
– Expandible for graduated
investment in line with IT growth
– Prepared for the installation
of various IT climate control
solutions
– Systems may be dismantled
and reassembled, for maximum
investment security
The tests were performed as
system tests and confirmed by
way of test reports.
Color:
Enclosure: RAL 7035
Supply includes:
− Security safe with operator
door and servicing door
− Cable entry in both side
elements
− Both doors with key lock
Internal dimensions inches (mm)
Suite creation
B2
42 U
47 U
42 U
47 U
87 (2210)
95 (2410)
87 (2210)
95 (2410)
Width (B1)
43 (1100)
43 (1100)
43 (1100)
43 (1100)
Depth (T1)
47 (1200)
47 (1200)
55 (1400)
55 (1400)
Height (H2)
80 (2030)
88 (2230)
80 (2030)
88 (2230)
Width (B2)
36 (920)
36 (920)
36 (920)
36 (920)
Depth (T2)
39 (1000)
39 (1000)
47 (1200)
47 (1200)
7999.896
7999.897
7999.983
7999.987
Individual solution
Part No.
T2
Optional:
− Electronic combination lock
− Electronic lock preequipped
for activation by an external
access control system
− Cable entry in the top and
base unit
− Twin-walled doors
− Choice of door hinges
Height (H1)
External dimensions inches (mm)
B1
T1
H2
Protection standards:
− Fire protection F90 based on
DIN 4102
− Compliance with limit values
ΔT < 50 K, relative humidity
< 85% for 30 minutes
− Theft protection optionally
resistance class II, III or IV
EN 1627
− Protection against dust and
water jets IP 56 to IEC 60 529
− Protection from acrid gases to
DIN 18 095
H1
Applications:
– A high level of protection against
potential physical threats for IT
– Targeted configuration
components transform the safe
into a complete, compact data
center
Left
7999.977
7999.980
7999.984
7999.988
Center
7999.978
7999.981
7999.985
7999.989
Right
7999.979
7999.982
7999.986
7999.990
Accessories
19" (482.6 mm) rack, based on TS 8, 19" (482.6 mm) rails front
and rear, 6 support strips for mounting on the 19" (482.6 mm) rails,
2 system chassis with mounting flanges
H 79 (2000) x W 32 (800) x D 39 (1000)
7995.969
H 87 (2200) x W 32 (800) x D 39 (1000)
7999.970
Early fire detection system EFD Plus
see page 50
Fire alarm and extinguisher system DET-AC Plus
see page 50
CMC monitoring system
see page 54
Standard protection from:
Fire
48
Extinguishing
water
Vandalism
Unauthorized
access
Metric measurements for are exact, imperial measurements are rounded
Dust
Theft/
burglary
Make IT easy: Enclosure, power and cooling solutions
Data Center Container DCC
System Accessories Page 67
Fire protection:
− Fire protection, internal
panels: F30, optionally F90
based on DIN 4102/EN1363,
component-tested
Duct system:
− Type: Hard duct DN200
− Dimensions of packing space:
5 x 5 inches (120 x 120 mm)
Raised floor:
− Substructure type:
Control room
− Number of slotted plates
dependent on number of racks
− Total raised height:
12 inches (300 mm)
preconfigured data center types.
Ask for the Rittal Data Center
Container project planning form.
Within just a few days, you will
receive an initial quote. Bayed
containers, higher cooling
outputs e.g. using LCP technology
or more than seven racks – we
would be happy to design your
own individual data center
container. Additional container
sizes, including ISO compliant
dimensions, are available.
Climate control –
direct free cooling:
− Available with 23900 and 34144
BTU (7 and 10 kW) units. Up to
3 units can be integrated
− Targeted cooling via aisle
containment
Power distribution:
− Infeed: CEE connector 125 A,
3-phase/N/PE, 400 V/50 Hz
− Enclosure dimensions,
H x W x D inches (mm)
80 x 32 x 24 (2000 x 600 x 400)
Optional:
− Up to seven 19” (482.6 mm)
IT racks with power supply
− UPS, with up to 15 minutes
autonomy
Note on standard and
customized versions:
There is a standard range of
models available with 12
Version
R7A
R7B
R7C
R7D
Height x Width x Depth inches (mm)
R14A
R14B
R14C
R14D
− Fire alarm/gas extinguisher
system (Novec 1230)
− Access systems, access door
(keyboard, code card)
− Monitoring and management
(CMC, RiZone)
Sizes:
− ISO shipping container available.
− Additional dimensions available.
Photo shows a configuration with
equipment not included in the
base part number
R20A
R20B
R20C
R20D
128 x 118 x 238 (3250 x 3000 x 6055)
Usable area ft2 (m2)
163 (15.2)
Project planning on request
Part No.
Cooling capacity BTU (kW)
Redundancy cooling
Available area inches (mm) (racks, UPS, DET-AC)
23900
(7)
23900
(7)
23900
(7)
23900
(7)
47800
(14)
47800
(14)
47800
(14)
47800
(14)
68288
(20)
68288
(20)
68288
(20)
68288
(20)
1+1
1+1
1+1
1+1
2+1
2+1
2+1
2+1
2+1
2+1
2+1
2+1
177
(4500)
177
(4500)
177
(4500)
177
(4500)
157
(4000)
157
(4000)
157
(4000)
157
(4000)
157
(4000)
157
(4000)
157
(4000)
157
(4000)
Heavy-duty raised floor
Plug-and-play power distribution
Hard ducts 2 x DN200
Security door WK2
Optional items
UPS (uninterruptible power supply)
DET-AC XL fire alarm/extinguisher system
Max. no. of racks 42 U (24” (600 mm) wide)
7
6
7
6
7
6
6
5
7
6
6
5
Max. no. of racks 42 U (32” (800 mm) wide)
5
4
5
4
5
4
4
4
5
4
4
4
Higher racks (47 U)
Rack power supply (PSM, PDM)
Monitoring package (CMC)
Security door WK3
Additional hard ducts
Metal sun shade
Standard
Option
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
49
Fire alarm and extinguisher system DET-AC/EFD Plus
System Accessories Page 67
EFD Plus
The EFD Plus system is a compact
early fire detection system
with active smoke extraction
system. The integral fan system
continuously extracts the air from
the enclosure, and passes it over
two smoke detectors. The first
smoke detector is extremely
sensitive and triggers a prealarm.
The second smoke detector
triggers the main alarm.
DET-AC Plus
The DET-AC Plus is a compact
fire alarm and active extinguisher
system with smoke extraction
system, built into one height unit.
The detection system is identical
to that used in the EFD Plus
system. Fire extinguishing with the
extinguisher gas NOVEC 1230 is
automatically activated when a
main alarm is triggered. With the
extinguisher gas supply provided,
a volume of up to 32 ft2 (3 m3)
can be extinguished.
DET-AC Plus Slave
In conjunction with the DET-AC
Plus slave system, up to five
bayed enclosures may be
extinguished. In addition to the
DET-AC Plus unit, a DET-AC Plus
Save unit is used for each
additional enclosure and contains
the extinguisher gas for one
enclosure. For detection purposes,
the pipework from the DET-AC Plus
system is laid in all enclosures.
Fire alarm and extinguisher
system DET-AC Plus
Add-on unit
DET-AC Plus Slave
Height U (mm)
Weight lbs (kg)
Part No.
19” (482.6 mm) rack mount
25 (640)
22 (570)
20 (500)
Approx. 33 (15)
Approx. 26 (12)
Approx. 18 (8)
7338.120
7338.320
7338.220
Protection rating
IP 20
Ambient temperature (operation)
+ 50°F to +95°F (+10°C to +35°C)
Battery storage
+ 14°F to +95°F (– 10°C to +50°C)
Operating voltage
100/240 V AC 50/60 Hz
24 V DC
Uninterruptible mains electricity operation
Connections
Early fire detection system
EFD Plus
1 U (44)
Width inches (mm)
Depth inches (mm)
Benefits:
– Early fire detection
– Automatic extinguishing
– Innovative extinguisher gas
NOVEC 1230
− Eco-friendly
– 19” (482.6 mm) rack mount
with just 1 U
100/240 V AC 50/60 Hz
2 x 12 V; 2.2 A/approx. 4 h
3 RJ 12 connectors for connecting to the CMC, alternatively 3 relay outputs, max. contact load 24 V DC/0.5 A
Sensors
2 different scattered-light sensors
–
2 different scattered-light sensors
Display
LCD display with plain text info.
–
LCD display with plain text info.
No. of slave modules
Max. 4
–
Max. 5
No. of monitored enclosures
Max. 5
–
Max. 5
Extinguisher gas
Fill volume of extinguisher gas
Admissible max. protection volume ft3 (m3)
NOVEC 1230
–
32
–
106 (3)
–
Page
Also required
Pipe kit
7338.130
RJ 12 cable for alarm relaying to CMC, packs of 2
7320.814
Access sensors
Depth-variable slide rails
1)
50
–
59
1)
7320.530
–
–
–
56
7063.883
–
2 packs are required.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Security rooms
We plan and implement data
centers
– Basic protection or high-MBTF protection
for data centers
– Extendible
– Dismantling and reassembly =
investment protection
– Dust- and noise-reduced installation
– System-tested
– Multi-functional risk coverage
Whether you are planning a new build, an
extension or an optimization to your data center,
we are at your side as a trustworthy partner and
leading provider with decades of experience.
Criteria
System testing
Fire protection
Testing at
temperatures of up
to 1000°C and above
Conventional
design2)
Standards
Testing of the following standards as
complete system or structure1)
–
ECB·S certifications to EN 1047-2, 50 K
temperature increase and 85% rel.
humidity up to 24 hours (reheating
period), 60 minutes flame impingement
time
–
50 K temperature rise and 85% rel. humidity over 30
minutes, without reheat period
–
F120 as system test, according to the limits of EN
1363 (DIN 4102), for the cellular structure and its
built-in modules
–
F90 as system test, according to the limits of EN 1363
(DIN 4102), for the cellular structure and its built-in
modules
–
F180 only as component testing to EN 1363
(DIN 4102), wall system only
Basic protection
LER
Extend
LER
Basic
–
–
HighMTBF
LSR
Extend
–
–
–
–
–
–
Detonation test as system testing of 200 kg TNT from
40 m
–
–
–
Standing water, 72 hours, 40 cm, maximum 20 drops
–
–
–
Extinguisher water, IP x 6 as system testing to IEC 60
529, for the cellular structure and its built-in modules
–
Relative humidity, 85%, over 24 hours (reheat period),
60 minutes flame impingement time, to EN 1047-2
–
–
–
Relative humidity, 85%, over 30 minutes
–
Dust-tightness
IP 5x as system testing to IEC 60 529, for the cellular
structure and its built-in modules
–
Corrosive fire gases
Acrid gas-tightness, based on EN 1634-3 (DIN 18095)
–
WK 3 as system test to EN 1627/1630, for the cellular
structure and its built-in modules, such as doors
–
WK 2 as system test to EN 1627/1630, for the cellular
structure and its built-in modules, such as doors
–
WK 4 only as component testing to EN 1627/ DIN
1630, door system only
–
–
–
Shock test as system test, 3 shocks of 200 kg from
1.5 m after 45 minutes flame impingement time
–
–
–
Shock test as system test,1 shock of 200 kg from 1.5
m after 30 minutes flame impingement time
–
EMC protection
Protection against high-frequency irradiation and
radiation, verified by tests on comparable
components by TU Aachen
–
EMC optional
package
Extended high-frequency shielding in accordance
with BSI TL-03304
–
–
–
F120 only as component testing to EN 1363
(DIN 4102), wall system only
F90 only as component testing to EN 1363
(DIN 4102), wall system only
Explosion
Water
Unauthorized
access
Falling debris
1)
2)
–
System-tested products are tested as a complete construction. This comprises the cellular structure and installation modules such
as doors, cable shields or ventilation units. By contrast, component testing only refers to individual parts.
The conventional design refers to room structures of plasterboard, concrete and other standard construction materials which do
not offer sufficient protection for data center applications. Conventional designs are generally tested for use as fire walls.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
51
CMC III Processing Unit Compact
System overview
Up to 4 CAN-Bus
components are
supported.1)
Mini USB:
The cable 7030.080 is required for
programming.
Integral sensors:
– Temperature sensor
– Infrared access sensor
CMC III sensors
for direct connection
CMC III CAN-Bus sensor
CMC III Processing Unit
Compact
Voltage supply 24 V DC and redundant
voltage supply 24 V DC
Power packs/connection cables, see page 58
CMC II
sensors
Alarm relay output:
Changeover contact for safety extra-low
voltage
CMC III CAN-Bus access
Ethernet 10/100 BaseT RJ 45 with PoE:
Ethernet interface to IEEE 802.3
Via 10/100 BaseT full-duplex 10/100 Mbit/s.
Accessory modules RJ 12/RS232:
Display Unit 7320.491
ISDN Unit 7320.830
GSM Unit 7320.820
Two integral digital inputs
CMC III CAN-Bus Unit
Interfaces unit for
connecting CMC II
accessories
Connection for other
products,
see page 56.
Contains 2 channels of
the PU II Unit systems:
External 24 V DC supply
supported.
Part No.
CMC III
CAN-Bus Unit
1)
52
7030.030
Depending on the
power supply/connection
combinations, see page 57.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
CMC III Processing Unit Compact
System overview
Mini USB:
The cable 7030.080 is required for
programming.
Integral sensors:
– Temperature sensor
– Infrared access sensor
CMC III sensors
for direct connection
SD card insert:
for data logging
CMC III CAN-Bus sensor
CMC III Processing Unit
CMC II
sensors
Voltage supply 24 V DC and redundant
voltage supply 24 V DC
Power packs/connection
Power packs/connection cables, see page 58
CMC III CAN-Bus access
Alarm relay output:
Alarm relay output:
Changeover contact for safety extra-low
voltage
Ethernet 10/100 BaseT RJ45 with PoE:
Ethernet interface to IEEE 802.3
Via 10/100 BaseT full-duplex 10/100 Mbit/s.
Accessory modules RJ 12/RS232:
Display Unit 7320.490
ISDN Unit 7320.830
GSM Unit 7320.820
Up to 16 CAN-Bus
systems are
supported.1)
USB master for data logging and update
Two integral digital inputs
Up to 16 CAN-Bus
systems are
supported.1)
Control units
Control units
CMC III I/O Unit
2
CMC III Power Unit
1
Functions:
Contains
1 8 digital inputs
2 and 4 relay outputs
Switching and measurement
of voltage, power, output and
work.
With two outputs.
Also for the activation of
AC fans.
Part No.
CMC III
I/O Unit
1)
7030.040
Interfaces unit for
connecting CMC II
accessories
Connection for other
products, see page 57.
Part No.
CMC III
Power Unit
7030.050
Part No.
CMC III
CAN-Bus Unit
7030.030
Depending on the power supply/connection combinations, see page 57.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
53
CMC III Processing Unit Compact
Basic Modules and Connection Accessories Page 56
CMC III Processing Unit
Compact:
– Industrial/enclosure monitoring
– Building monitoring
– Small monitoring applications
in IT
CMC III Processing Unit
– Larger monitoring applications
in IT and industry
Color:
− Front: RAL 9005
− Enclosure: RAL 7035
Material:
Plastic
Protection rating:
IP 30 to IEC 60 529
Supply includes:
− Basic system
− Quick-start instructions
− 4 mounting feet
Photo shows a configuration with
equipment not included in the
base part number
Surface finish: Front smooth,
enclosure textured
W x H x D U inches (mm)
CMC III Processing Unit Compact
CMC III Processing Unit
1 U x 5.4 x 4.7 + 0.5
(1 U x 138 x 120+12 (front assembly))
1 U x 5.4 x 4.7 + 0.5
(1 U x 138 x 120+12 (front assembly))
Temperature range F° (C°)
32° to +131° F (0° to +55° C)
32° to +131° F (0° to +55° C)
Operating humidity range
5% to 95% relative humidity, non-condensing
5% to 95% relative humidity, non-condensing
Sensors/CAN-Bus connection units
Max. overall cable length for CAN-Bus
Part No.
Network interface (RJ 45)
Interfaces
Mini USB for system setting
–
For USB data recording and SW updates up to 32 GB
1x up to 32 GB for data recording
1 x for connecting Display Unit 7320.491 or
GSM Unit 7320.820 or ISDN Unit 7320.830
2
2
Relay output (terminal)
Change-over contact max. 24 V DC, 1 A
Change-over contact max. 24 V DC, 1 A
1 x for max. 4 sensors (quantity restriction,
see page 56)
2 x for max. 16 sensors each = 32 sensors in total
(quantity restriction, see page 56)
1 x acknowledgement button
1 x acknowledgement button
Concealed reset button
1 x service button
1 x service button
Piezo signal generator
1
1
1 x multi-color OK/warning/alarm
1 x multi-color OK/warning/alarm
LED display
Rear LED
1 x for the network status
1 x for the network status
Ethernet
TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv3, Telnet, SSH,
FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS server,
SMTP, XML, Syslog, LDAP
TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv3, Telnet, SSH,
FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS server,
SMTP, XML, Syslog, LDAP
1 x for connecting CMC III power pack
1 x for connecting CMC III power pack
1 x for direct connection/connecting CMC III power
pack
1 x for direct connection/connecting CMC III power
pack
1x
1x
Input 24 V DC (jack)
Input 24 V DC (terminals)
Power over Ethernet
54
–
1 x for connecting Display Unit 7320.491 or
GSM Unit 7320.820 or ISDN Unit 7320.830
Digital inputs (terminal)
Push-button
Redundant
power supply
7030.000
Ethernet to IEEE 802.3 via 10/100BaseT with PoE
Mini USB for system setting
CAN-Bus (RJ 45)
Protocols
7030.010
Ethernet to IEEE 802.3 via 10/100BaseT with PoE
Rear USB interface
Rear serial RS232 (RJ 12)
Operation/
signals
max. 32
2 x 164 ft (2 x 50 m)
Front USB interface
Front SD-HC slot
Inputs and
outputs
max. 4
1 x 164 ft (1 x 50 m)
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
CMC III Processing Unit Compact
CMC III Processing Unit Compact
Part No.
Time function
Functions
User administration
User interface
Control room connection
Integral
sensors
Temperature sensor
Access sensor
Make IT easy: Rack & data center solutions
CMC III Processing Unit
7030.010
7030.000
Real-time clock, energy-buffered (24 h) without
battery/accumulator, with NTP
Real-time clock, energy-buffered (24 h) without
battery/accumulator, with NTP
LDAP
LDAP
Integral WEB server
Integral WEB server
Integral OPC server
Integral OPC server
NTC sensor in the enclosure front
NTC sensor in the enclosure front
Infrared technology in the enclosure front
Infrared technology in the enclosure front
Metric measurements for are exact, imperial measurements are rounded
55
CMC III sensors/accessories
Control units for CMC III Processing Unit
Part No.
PU
Compact
PU
Maximum qty.
CMC III I/O Unit, 8 digital inputs + 4 relay outputs
7030.0403)
–
16
CMC III Power Unit, 1 input (C14) + 2 outputs (C13) 230 V, 50/60 Hz
7030.050
–
16
Temperature sensor
7030.110
4
32
Temperature/humidity sensor
7030.111
4
32
Infrared access sensor
7030.120
4
32
Vandalism sensor
7030.130
4
32
Analog airflow sensor
7030.140
4
101)
Analog differential pressure sensor
7030.150
4
32
Universal sensor (digital input or 4-20 mA
or SoBus power meter or Wiegand interface)
7030.190
4
32
7030.100
4
32
3)
CMC III sensors for direct connection
CMC III sensors for direct connection
CMC III CAN-Bus Unit for sensor
For connecting the following products:
5 x access sensors (packs of 2), connect a max. of 5 in series
7320.530
1 x smoke detector
7320.560
1 x motion detector
7320.570
1 x voltage monitor 48 V DC
7320.620
1 x leakage sensor
7320.630
1 x leakage sensor, with sensor length 49 ft (15 m)
7320.631
1/3 x fire detector and extinguisher system DET-AC Plus with 3 messages
7338.120
1/3 x fire early detector system DET-AC Plus with 3 messages
7338.220
1/2 x Door Control System with 2 enclosure channels
7320.790
Leak sensor cable
1 x leak sensor control unit 5V DC
9978.506
1 x sensing cable 25 ft (7600 mm) preinstalled male/female connectors
9978.507
1 x sensing cable 100 ft (35000 mm) preinstalled male/female connectors
9978.508
1 x power supply 100-240V to 5V dc, stripped end
9978.509
1 x sensing cable holder
9978.521
25
Access System
CMC III CAN-Bus Unit Access
(with integral infrared access sensor and interface for one reader III)
7030.200
2
161)
For connecting the following products:
1)
2)
3)
56
1 x Ergoform-S handle (electro-magnetic)
7320.700
1 x RAL 7035 comfort handle TS 8 (electro-magnetic TS 8 handle with master key
function, with and without CCP)
7320.721
1 x RAL 9005 comfort handle TS 8 (electro-magnetic TS 8 handle with master key
function, with and without CCP)
9970.139
1 x universal lock
7320.730
1 x universal handle
7320.950
1 x CMC III coded lock
7030.220
2
161)
1 x CMC III transponder reader
7030.230
2
161)
Max. 5 p. and
Max. 1 p. for power supply with PoE or 48 V power pack.
Optional attachment see pages 59, 60.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
CMC III sensors/accessories
Interface for PCU, FCS, DRC
Part No.
PU
Compact
PU
Maximum qty.
CMC III CAN-Bus Unit for 2 unit channels
7030.0303)
1
42)
For connecting the following products (note: separate supply via power pack possible):
2 x Fan Control System FCS (7320.812 fan 24 V DC for FCS)
7320.810
2 x fan mounting panel DC (universal fan roof
W x D 32” x 32” (800 x 800 mm) with FCS)
7858.488
2 x RFID controller DRC
7890.500
max. 1 p. for power supply with PoE or 48 V power pack.
3)
Optional attachment see pages 59, 60.
2)
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
57
CMC III accessories
Power pack
The CMC III power pack may be integrated into
the CMC III assembly unit.
CMC III power pack
1)
Power pack
for PU II/Basic CMC/FCS
A 24 V DC power pack is required to supply the
power. Both power packs include an output cable,
65” (1650 mm) long. There are two versions
available:
– The 100 – 240 V AC power pack requires an
IEC connection cable to supply the voltage
– An alternative power pack is designed for
the telecommunications sector (48 V battery
voltages) and is connected at the input end via
a terminal block
Part No.
Input voltage 100 – 240 V 50/60 Hz,
output voltage 24 V DC, 2 A
7030.0601)
Connection cable/extension required
USA/CDN: 230/115 V, Part No. 7200.214
D/F/B: 230 V, Part No. 7200.210
C13/C14: 230/115 V, Part No. 7200.215
Primary input voltage
Output voltage
Part No.
48 V DC
24 V DC
7320.435
Connection cable for PU II/Basic CMC/FCS for
direct connection, provided the 24 V DC supply is
available.
Packs of
Length
inches (mm)
Part No.
1
79 (2000)
7320.813
Technical specifications 7320.425:
− Rated voltage: 100 – 240 V AC, 50/60 Hz
− Rated current: max. 1.5 A
− Secondary range: 24 V DC, 3 A
Technical specifications 7320.435:
− Rated voltage: 20 – 72 V DC
− Rated current: max. 2.5 A
− Secondary range: 24 V DC, 1.3 A
Also required:
Connection cable for 7320.425 power pack
Programming cable
The programming cable is required for
commissioning of the Processing Unit (PU) or
PU Compact.
58
Metric measurements for are exact, imperial measurements are rounded
Part No.
CMC III programming cable USB
7030.080
Make IT easy: Enclosure, power and cooling solutions
CMC III accessories
CAN-Bus connection cable
Length
inches (mm)
PU
Part No.
CMC III CAN-Bus
connection cable RJ 45
20 (500)
1
7030.090
CMC III CAN-Bus
connection cable RJ 45
39 (1000)
1
7030.091
CMC III CAN-Bus
connection cable RJ 45
59 (1500)
1
7030.092
CMC III CAN-Bus
connection cable RJ 45
79 (2000)
1
7030.093
CMC III CAN-Bus
connection cable RJ 45
197 (5000)
1
7030.094
CMC III CAN-Bus
connection cable RJ 45
394 (10000)
1
7030.095
Cable
This can be used to connect the PU with the
CAN-Bus sensors III, units III, control units III
as a bus. Also for cabling together.
Connection cable/extension
The cable is used to connect to:
– CMC III power pack C13
– CMC III power unit C13
– PCU
Technical specifications:
PVC cable, 3-pole, with IEC connector (nonheating appliances) with contact protection
CEE22. Length: Minimum 71” (1800 mm)
Extension cable
for sensor cable
Country version
Voltage Volt
Part No.
USA/CDN/C13
230/115
7200.214
D/F/B/C13
230
7200.210
IEC 320 device
extension C13/
C14
230/115
7200.215
Connection
cable D/C19
230/115
7200.216
Connection
cable C19/C20
230/115
7200.217
Connector/
jack
Length
inches (mm)
Packs of
Part No.
RJ 12
197 (5000)
4
7200.450
RJ 12
39 (1000)
2
7320.814
CMC III mounting unit, 1 U
To accommodate PU, PU Compact, control units,
CMC III CAN-Bus unit and CMC III power pack.
The mounting unit can accommodate up to 3 units
and is secured in the 19” (482.6 mm) frame.
Make IT easy: Enclosure, power and cooling solutions
CMC III mounting unit, 1 U
Packs of
Part No.
1
7030.070
Metric measurements for are exact, imperial measurements are rounded
59
CMC III accessories
CMC III mounting unit
for enclosure frame
Can accommodate one unit and is mounted on
the enclosure frame.
CMC III mounting unit
for enclosure frame
Mounting unit, 1 U
Mounting unit, 1 U
For display, ISDN and GSM unit, fan control
system, door control module
For accommodating between two 19” (482.6 mm)
mounting rails. Cable clamp straps 7610.000
or 7611.000 can be used for cable clamping.
Packs of
Part No.
1
7030.071
Packs of
Part No.
1
7320.440
Single cover
Material:
Carbon steel
Packs of
Part No.
2
7320.441
Surface finish:
Spray-finished
Color:
RAL 7035
Display Unit II
The Display Unit II may be linked directly to the
CMC III. CMC alarms, status messages,
temperatures, voltages, currents etc. may be
displayed on the screen, depending on the
monitoring application.
Packs of
Part No.
1
7320.491
Note:
The serial interface RS232 of the PU/PUC may
only be assigned to one accessory module.
Also required:
− Processing unit, see page 54
− Mounting unit, see above
ISDN unit
For configuring a redundant transmission channel
or, if there is no network infrastructure available,
for alarm forwarding. The alarm signal is designed
in SMS format. Power supply is via the processing
unit.
Requirements for the ISDN connection:
− DSS1 (Euro-ISDN) must also be provided when
connecting to the ISDN system
− Point-to-multi-point configuration
Components
ISDN unit
1)
Part No.
7320.8301)
Extended delivery times.
Note:
The serial interface RS232 of the PU/PUC may
only be assigned to one accessory module.
Also required:
− Processing unit, see page 54
− Mounting unit, see above
Supply includes:
Connection cable
60
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
CMC III accessories
GSM Unit Quad-Band
For configuring a redundant transmission channel
or, if there is no network infrastructure available,
the unit may be used for alarm forwarding.
The alarm signal is designed in SMS format.
The GSM unit quad-band covers 4 GSM
frequencies: 850 MHz, 900 MHz, 1800 MHz and
1900 MHz. A standard, commercially available
SIM card for GSM must be provided by the
customer.
GSM Unit Quad-Band
Part No.
SMS function
7320.820
Also required:
− Processing unit, see page 54
− Mounting unit, see page 60
Note:
The serial interface RS232 of the PU may only
be assigned to one accessory module.
Fan Control System FCS
Speed-controlled fan system
The Fan Control System regulates and controls
the speed of up to 6 fans, 24 V DC. It may
optionally be connected to the CMC III CAN-bus
unit 7030.030.
Functions:
− Speed-regulated speed control
− Fan speed monitoring
− Optional connection via Web/SNMP
FCS
Part No.
Without fan
7320.810
Also required:
− Power pack 7030.060, see page 58
− Connection cable 7200.210, see page 59
− Fan 7320.812, see below
− Extension cable 7320.814, see page 59
− 1 U mounting unit 7320.440, see page 60
Note:
FCS fitted in fan mounting panel, Part No.
7858.488.
Fan 24 V DC for FCS
with speed monitoring
Fan with integral speed monitoring with RJ 12
connector/connection cable 24" (600 mm) for
connecting to FCS 7320.810.
Packs of
Part No.
2
7320.812
Technical specifications:
− Rated voltage: 24 V DC
− Rated current: 0.28 A (max.)
− Rated output: 6.72 W (max.)
− Air throughput (unimpeded air flow): 175 m3/h
− Speed: 2650 rpm
− Noise level: 45 dB (A)
Also required:
RJ 12 extension, 39” (1000 mm), 7320.814,
see page 59
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
61
CMC III accessories
Universal lock unit
The security lock consists of a base unit and a
lock counterpart. The base unit is attached to the
enclosure frame. The lock counterpart is attached
to the door.
Packs of
Part No.
1 set
7320.730
Technical specifications:
− Rated voltage: 24 V DC
− Rated current: 140 mA
Note:
Supplied without mounting kit.
Also required:
CMC III CAN-Bus unit access 7030.200,
see page 56
Automatic door opening kit
For fitting a standard door for the Door Control
System
– The door kit operates with a gas pressure
damper system, allowing the door to be
opened in any emergency situation. The doors
are kept closed by a magnet system, which
unlike mechanical lock systems will release the
door in every instance
– The door kit is connected and activated
using the corresponding door control module
7320.790
Complete kit
Packs of
Part No.
1
9971.115
Supply includes:
− Gas pressure damper
− Cable harness
− Magnetic lock
− Assembly parts
62
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Monitor and keyboard unit
Monitor and keyboard unit, 1 U
With 17” TFT display and VGA/DVI connection
Benefits:
– High-quality manufacturing
– Analog and digital video input
– Separate numerical keypad
– Optionally with integrated KVM switch for up
to 32 server connections in just 1 U
– Low energy consumption
– Simple, one-man installation
Technical design
− 17” (432 mm) TFT display
− Native resolution 1280 x 1024
− Format 4 : 3
− 16.7 million colors
− Brightness approx. 350 cd/m2 (typ.)
− Contrast ratio approx. 1000 : 1
− Mains voltage 100 – 240 V AC, 50 – 60 Hz
− Ambient temperature +41° to +113° F
(+5° to +45° C) in operation
− Max. power consumption in operation,
without optional KVM switch: 32 W
− Max. power consumption when closed,
without optional KVM switch: < 1 W
− Rear connections: Mains power, VGA,
DVI-D, PS/2, USB, power supply for KVM
− Lockable at the front
− Cables are safely routed in the energy chain
Height
Width
inches (mm)
Depth
inches (mm)
Installation
depth
inches (mm)
Packs of
1U
19 (482.6)
27 (680)
27 – 33
(680 – 850)
1
Color
Part No.
RAL 7035
9055.312
RAL 9005
9055.4121)
Other country-specific versions available on request.
1)
Extended delivery times.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
63
Monitoring
RiZone Appliance Standard
RiZone is supplied as an appliance or a software
appliance.
As an appliance, RiZone is supplied with global
support, installed on a powerful server. The
software appliance is available as a virtual server
which can easily be used on existing hardware in
the data center.
The RiZone operating manual and
registration for RiZone Light are available at
www.rittal.us/software.
Also required:
RiZone Appliance IP node license according to
the number of IP nodes available.
Standard version
Part No.
Hardware appliance1)
Software appliance1)
1)
Server with Windows
RiZone software
7990.101
7990.201
RiZone graphics tool
7990.301
Server with Windows
RiZone software
RiZone graphics tool
7990.103
7990.203
7990.303
All part numbers on the same line belong together, and must always be ordered together.
RiZone Appliance High-MTBF
In addition to the standard version, the high-MTBF
version scales up to Tier IV availability as per the
Uptime Institute’s definition.
Also required:
RiZone Appliance IP node license according to
the number of IP nodes available.
RiZone is supplied as an appliance or a software
appliance.
As an appliance, RiZone is supplied with global
support, installed on a powerful server. The
software appliance is available as a virtual server
which can easily be used on existing hardware in
the data center.
High-MTBF version
Hardware appliance1)
Software appliance
1)
1)
Part No.
Server with Windows
RiZone software
7990.102
7990.202
7990.302
Server with Windows
RiZone software
RiZone graphics tool
7990.104
7990.204
7990.304
All part numbers on the same line belong together, and must always be ordered together.
RiZone Appliance
IP node license
The volume licenses for the IP nodes are
graduated from 10 to 1000 nodes and may be
adapted precisely to the size of the data center.
For each active component or other SNMPcompatible component to be covered, one node
license is required.
10
2
Part No.
RiZone
RiZone
software
graphics tool
7990.205
7990.305
25
4
7990.206
50
4
7990.207
7990.307
100
8
7990.208
7990.308
250
10
7990.209
7990.309
500
15
7990.210
7990.310
1000
20
7990.211
7990.311
For no. of
IP nodes1)
The flexible RiZone license model allows optimum
adaptation to any project size, while at the same
time allowing the opportunity to grow with the
data center.
64
RiZone graphics tool
1)
Console
licenses
included
7990.306
All part numbers on the same line belong together,
and must always be ordered together.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Monitoring
Client Access license
Part No.
Additional license for operation of another RiZone
console.
For 10 IP nodes1)
1)
RiZone module SNMP support
for units from other
manufacturers
RiZone
software
RiZone
graphics tool
7990.213
7990.313
All part numbers on the same line belong together,
and must always be ordered together.
Extension
Part No.
RiZone SNMP support for units
from other manufacturers
7990.014
For the incorporation of SNMP-compatible units
from other manufacturers into RiZone. With MIB
browser.
Microsoft Operations Manager
Management Pack
For integrating RiZone into the Microsoft
Operations Manager.
Make IT easy: Enclosure, power and cooling solutions
Extension
Part No.
Microsoft SCOM
Management Pack
7990.012
Metric measurements for are exact, imperial measurements are rounded
65
66
Make IT easy: Rack & data center solutions
Accessories
Base............................................................................................................. 68
Walls............................................................................................................. 79
Baying.......................................................................................................... 81
Doors/locks................................................................................................... 82
Interior installation........................................................................................ 84
Cable management...................................................................................... 97
Ventilation................................................................................................... 104
Make IT easy: Rack & data center solutions
67
Base
Flex-Block base/plinth system
Flex-Block
− Plastic base/plinth with metal trim panels
for fast, tool-free assembly
− Individual cable management
− Extensive range of accessories
− Symmetrical base/plinth
Base/plinth, sealed, height 4” (100 mm)
Enclosure width or depth
inches (mm)
Material:
− Corner pieces: Fiberglass-reinforced plastic
− Cover caps: ABS
− Trim panels: Sheet steel
Color:
RAL 9005
Sealed base/plinth supply includes:
1 set =
− 4 corner pieces
− 4 trim panels
− 4 cover caps
− Assembly parts for mounting on the enclosure
Packs of
Part No.
24 (600)
24 (600)
1
8001.660
24 (600)
32 (800)
1
8001.680
32 (800)
32 (800)
1
8001.880
32 (800)
40 (1000)
1
8001.800
40 (1000)
12 (300)
1
8001.030
40 (1000)
24 (600)
1
8001.060
48 (1200)
12 (300)
1
8001.230
48 (1200)
24 (600)
1
8001.260
48 (1200)
32 (800)
1
8001.280
Base/plinth, vented, height 4” (100 mm)
For enclosure size
Vented base/plinth supply includes:
1 set =
− 4 corner pieces
− 2 trim panels, vented (width)
− 2 trim panels, sealed (depth)
− 4 cover caps
− Assembly parts for mounting on the enclosure
Width
inches
(mm)
Depth
inches
(mm)
Packs of
Part No.
24 (600)
24 (600)
1
8001.662
24 (600)
32 (800)
1
8001.682
24 (600)
40 (1000)
1
8001.602
24 (600)
47 (1200)
1
8001.622
32 (800)
24 (600)
1
8001.862
32 (800)
32 (800)
1
8001.882
32 (800)
40 (1000)
1
8001.802
32 (800)
47 (1200)
1
8001.822
Accessories:
− System bar 23 x 23 mm (4171.500, 4172.500),
see page 69.
− Baying clip (8000.100), see page 69.
− Adaptor sleeve (8000.500), see page 69.
− Base mounting plate (2817.000),
see page 70.
− Filter mats for vented base/plinth (7583.500,
7581.550), see page 69.
68
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Base
Flex-Block base/plinth system
System bar, 23 x 23 mm
for Flex-Block
Tool-free installation in two levels via plug-in
system in the Flex-Block depth is supported.
For the installation of cable clamp rails.
Installation options:
In the width and depth
for Flex-Block, vented version
To cover the trim panel in the Flex-Block. The filter
mat is simply inserted into the trim panel from the
rear. May be shortened to the required length.
Filter class G3 to DIN EN 779.
for baying the Flex-Block corner pieces
Tool-free baying of Flex-Block base/plinths via
a simple clip system.
Packs
of
Part No.
18 (445)
24 (600)
12
4171.500
25 (645)
32 (800)
12
4172.500
Note:
Additional sizes available for use in enclosure,
see page 85.
Surface finish:
Zinc-plated
Baying clip
For
width/depth
inches (mm)
Supply includes:
− 12 system bars
− Assembly parts for mounting
Material:
Sheet steel
Filter mat
Length
inches (mm)
For enclosure width
inches (mm)
Packs
of
Part No.
24/32 (600/800)
4
7583.500
Packs of
Part No.
12
8000.100
Material:
Fiberglass-reinforced plastic
Color:
RAL 9005
Adaptor sleeve
for Flex-Block
To accommodate leveling feet and twin castors
on the Flex-Block and for assembling a 8”/12”
(200 mm/300 mm) high base/plinth by stacking
the base/plinth corner pieces.
Material:
Steel
Packs of
Part No.
12
8000.500
Accessories:
− Leveling feet (4612.000), see page 72.
− Twin castors (7495.000, 6184.000),
see page 72.
Surface finish:
Zinc-plated
Supply includes:
− 12 adaptor sleeves
− 8 screws M12
− 8 washers
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
69
Base
TS base/plinth
Base/plinth components
front and rear
Color:
Cover caps: RAL 9005/7035
Base/plinth component consisting of one trim
panel and two preconfigured corner pieces.
Supply includes:
1 set = 2 base/plinth components, 4 cover caps,
4 screws and captive nuts M12 for mounting on
the enclosure.
Material:
− Base/plinth components: Sheet steel
− Cover caps: Plastic
Accessories:
− Base mounting plate 2817.000, see below.
Surface finish:
Spray-finished
Enclosure width
inches (mm)
Detailed drawings:
Available at www.rittal.us
Color
RAL 7035
12 (300)
12 (300)
8” (200 mm) high
–
8601.905
8602.905
9978.362
9967.490
8601.605
8602.605
–
–
–
32 (800)
32 (800)
4” (100 mm) high
–
24 (600)
24 (600)
Part No.
RAL 9005
–
Base/plinth trim panels, side
For mounting between the base/plinth
components.
9978.363
9967.491
8601.805
8602.805
9978.364
9967.492
Enclosure
depth inches
(mm)
Material:
Sheet steel
Surface finish:
Spray-finished
Supply includes:
1 set =
2 base/plinth trim panels, including parts for
attaching to the base/plinth components.
Base mounting plate
For fastening the base/plinth to the floor without
moving the enclosure or the bayed enclosure
suite. For assembly screws up to 12 mm Ø.
RAL
7035
RAL
9005
Part No.
8” (200 mm)
high
24 (600)
–
8602.065
32 (800)
–
8602.085
36 (900)
–
8602.095
40 (1000)
–
8602.015
40 (1000)
–
42 (1050)
–
9967.494
–
48 (1200)
48 (1200)
9967.493
–
8602.025
9967.495
Packs of
Part No.
10
2817.000
Material:
Carbon steel
Surface finish:
Zinc-plated
70
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Base
TS base/plinth
Base mounting bracket
For anchoring the enclosure at any position of the
base frame, particularly in cases where the
existing holes in the frame or base tray cannot be
used due to the installed equipment or because
the substructure prevents them from being used.
Packs of
Part No.
4
8800.210
Note:
Additional holes in the base are required for
mounting.
Material:
Carbon steel
Surface finish:
Zinc-plated
Bolt down kits
For anchoring the enclosure even if it is on
casters, at any position of the base frame. Has
a vertical slot to account for different vertical
positions.
1)
Description
Packs of
Part No.
Standard bolt down kit
4
9970.989
Bolt down anchor kit
4
9978.4151)
Cannot be used with casters or leveling feet.
Material:
Carbon steel, E-coated
Note:
Additional holes in the base are required for
mounting.
Base/plinth adaptor
for leveling feet
Connection component for fastening M12 leveling
feet 4612.000 to the TS base/plinth.
Packs of
Part No.
4
8800.220
Material:
Carbon steel
Surface finish:
Zinc-plated
Also required:
Leveling feet, 4612.000, see page 72
Base/plinth adaptor
for twin casters
Connection component for mounting twin casters
to the TS base/plinth.
Packs of
Part No.
4
8800.290
Material:
Carbon steel
Surface finish:
Zinc-plated
Also required:
Base/plinth trim panels, side, wherever a twin
caster is fitted; see page 70.
Note:
Twin casters, see page 72.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
71
Base
Base
Leveling feet
0.7 – 1.7" (18 – 43 mm) high
To compensate for height differences with floor
irregularities. Thread length 40 mm.
Assembly thread M12.
Packs of
Part No.
4
4612.000
M12
For:
– Flex-Block, also suitable for TS base/plinth
58
40
Max. admissible static load:
approx. 661 lbs (300 kg) per leveling foot
18
SW 19
Also required:
For mounting on the TS base/plinth:
Base/plinth adaptor 8800.220, see page 71
Ø 47
Leveling feet
For TS base/plinth
To compensate for uneven floors, can be mounted
on enclosure or on base.
Packs of
Part No.
4
9961.504
Length of thread:
2” (51 mm)
Load capacity:
800 lbs (363 kg) each
Type of thread:
M12
Twin casters
Mounting thread M12 .4” (20 mm)
For:
– Baying system TS 8
– Data Rack
Maximum permissible
static load (per caster)
165 (75 kg)
Ground clearance
3” (85 mm)
Lock
2 with, 2 without
Packs of
Also required:
For mounting on the TS base/plinth:
Base/plinth adaptor for twin casters 8800.290,
see page 71
1 set
Black with grey
running surface
Color
Part No.
6148.000
For mounting on Flex-Block:
Adaptor sleeve 8000.500 see page 69
Maximum permissible
static load (per caster)
Ground clearance
Lock
Packs of
Color
Part No.
72
Metric measurements for are exact, imperial measurements are rounded
265 lbs (120 kg)
5” (125 mm)
2 with, 2 without
1 set
Black
7495.000
Make IT easy: Enclosure, power and cooling solutions
Base
Base
Caster kit
Casters help simple movement on even floors.
Easy to install. Kit includes hardware, left and
right rigid casters and two swivel casters.
Kit includes
Part No.
4 casters /1 wrench
9968.751
Load capacity:
Supports dynamic load rating of 2250 lbs
(1020 kg) per cabinet
Reinforcement bracket
for TS
For use as an additional stabilizer to the clamping
straps when populated enclosures are screwfastened via the base tray to the base/plinth or
pallet for transportation purposes.
Packs of
Part No.
4
8800.830
Material:
Carbon steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
73
Base
Gland plate, TS IT
Gland plate
Material:
Sheet steel
for TS IT
Potential equalisation is provided via assembly
components and grounding points.
– Gland plate set
To conceal the entire base opening.
– Gland plate modules
Select suitable modules depending on
the application.
Surface finish:
Zinc-plated
Supply includes:
Assembly parts.
Accessories:
Clips for gland plates,
see page 78.
For enclosure depth 24” (600 mm)
For enclosure width inches (mm)
A Gland plate set
Packs of
Required
packs of
24 (600)
1 set
1
–
Packs of
Required
packs of
32 (800)
Part No.
Gland plate, solid, with sliding panel, multi-piece
Gland plate modules
5502.510
For enclosure width inches (mm)
24 (600)
Part No.
B 1 module plate as selected
Gland plate, depth 6” (150 mm)
1
1
5001.218
5001.219
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
Vented with airflow regulator
7825.366
7825.386
Cable entry with brush strip
7825.361
7825.381
7825.360
7825.380
7825.367
7825.387
–
7825.388
Module plate,
depth
9” (237.5 mm)
Vented
1
1
Cable entry with brush strip, super-airtight
Cable entry, side
Part No.
C Cable entry, rear or front
Gland plate, depth 4” (100 mm)
1
2
5001.214
5001.215
Sliding panel, depth 6” (150 mm)
1
2
5001.239
5001.240
Self-adhesive foam cable clamp strip, 10 ft. (3000 mm)
1
1
2573.000
2573.000
Part No.
D Cable entry, center
Gland plate, depth 4” (100 mm)
1
2
5001.214
5001.215
Sliding panel, depth 6” (150 mm)
1
2
5001.239
5001.240
1 set
1
8802.060
8802.080
Section for cable entry, center
A
B
C
5
1
2
Also required:
Base mount,
see page 78.
D
7
74
32 (800)
6
5
2
3
5
5
3
5
3
5
1 Gland plate, depth 10” (250 mm)
5 Sliding panel, depth 6” (150 mm)
2 Gland plate, depth 6” (150 mm)
6 Module plate, depth 9” (237.5 mm)
3 Gland plate, depth 4” (100 mm)
7 Self-adhesive foam cable clamp strip
4 Gland plate, depth 2” (50 mm)
8 Section for cable entry, center
Metric measurements for are exact, imperial measurements are rounded
8
Note:
Total installation
depth 20” (512 mm)
Make IT easy: Enclosure, power and cooling solutions
Base
Gland plate, TS IT
For enclosure depth 32” (800 mm)
For enclosure width inches (mm)
A Gland plate set
Packs of
Required
packs of
24 (600)
1 set
1
–
Packs of
Required
packs of
32 (800)
Part No.
Gland plate, solid, with sliding panel, multi-piece
Gland plate modules
5502.530
For enclosure width inches (mm)
24 (600)
32 (800)
Part No.
B 1 module plate as selected
Gland plate, depth 10” (250 mm)
1
1
5001.222
Gland plate, depth 4” (100 mm)
1
1
5001.214
5001.215
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
Vented with airflow regulator
7825.366
7825.386
Cable entry with brush strip
7825.361
7825.381
7825.360
7825.380
7825.367
7825.387
–
7825.388
Module plate,
depth
9” (237.5 mm)
Vented
1
1
Cable entry with brush strip, super-airtight
Cable entry, side
5001.223
Part No.
C 2 module plates as selected
Gland plate, depth 4” (100 mm)
1
1
5001.218
5001.219
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
Vented with airflow regulator
7825.366
7825.386
Cable entry with brush strip
7825.361
7825.381
7825.360
7825.380
7825.367
7825.387
–
7825.388
Module plate,
depth
9” (237.5 mm)
Vented
1
2
Cable entry with brush strip, super-airtight
Cable entry, side
Part No.
D Cable entry, rear or front
Gland plate, depth 10” (250 mm)
1
1
5001.222
Gland plate, depth 6” (150 mm)
1
1
5001.218
5001.219
Sliding panel, depth 6” (150 mm)
1
2
5001.239
5001.240
Self-adhesive foam cable clamp strip, 10 ft. (3000 mm)
1
1
2573.000
2573.000
5001.223
Part No.
E Cable entry, center
Gland plate, depth 10” (250 mm)
1
1
5001.222
5001.223
Gland plate, depth 6” (150 mm)
1
1
5001.218
5001.219
1
2
5001.239
5001.240
1 set
1
8802.060
8802.080
Sliding panel, depth 6” (150 mm)
Section for cable entry, center
A
B
5
C
D
6
6
1
3
5
1
1
3
5
6
3
1 Gland plate, depth 10” (250 mm)
5 Sliding panel, depth 6” (150 mm)
2 Gland plate, depth 6” (150 mm)
6 Module plate, depth 9” (237.5 mm)
3 Gland plate, depth 4” (100 mm)
7 Self-adhesive foam cable clamp strip
4 Gland plate, depth 2” (50 mm)
8 Section for cable entry, center
Make IT easy: Enclosure, power and cooling solutions
E
7
2
5
5
2
8
1
1
5
5
Also required:
Base mount,
see page 78.
Note:
Total installation
depth 28” (712 mm)
Metric measurements for are exact, imperial measurements are rounded
75
Base
Gland plate, TS IT
For enclosure depth 39” (1000 mm)
For enclosure width inches (mm)
A Gland plate set
Packs of
Required
packs of
24 (600)
1 set
1
5502.540
Packs of
Required
packs of
32 (800)
Part No.
Gland plate, solid, with sliding panel, multi-piece
Gland plate modules
For enclosure width inches (mm)
24 (600)
32 (800)
Part No.
B 1 module plate as selected
Gland plate, depth 10” (250 mm)
1
2
5001.222
Gland plate, depth 2” (50 mm)
1
1
5001.210
5001.211
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
Vented with airflow regulator
7825.366
7825.386
Cable entry with brush strip
7825.361
7825.381
7825.360
7825.380
7825.367
7825.387
–
7825.388
Module plate,
depth
9” (237.5 mm)
Vented
1
1
Cable entry with brush strip, super-airtight
Cable entry, side
5001.223
Part No.
C 2 module plates as selected
Gland plate, depth 10” (250 mm)
1
1
5001.222
5001.223
Gland plate, depth 4” (100 mm)
1
1
5001.214
5001.215
Sliding panel, depth 6” (150 mm)
1
1
Vented with airflow regulator
Cable entry with brush strip
Module plate,
depth
9” (237.5 mm)
Vented
1
2
Cable entry with brush strip, super-airtight
Cable entry, side
5001.239
5001.240
7825.366
7825.386
7825.361
7825.381
7825.360
7825.380
7825.367
7825.387
–
7825.388
Part No.
D Cable entry, rear or front
Gland plate, depth 10” (250 mm)
1
2
5001.222
5001.223
Gland plate, depth 4” (100 mm)
1
1
5001.214
5001.215
Sliding panel, depth 6” (150 mm)
1
2
5001.239
5001.240
Self-adhesive foam cable clamp strip, 10 ft. (3000 mm)
1
1
2573.000
2573.000
1
2
5001.222
Gland plate, depth 4” (100 mm)
1
1
5001.214
5001.215
Sliding panel, depth 6” (150 mm)
1
2
5001.239
5001.240
1 set
1
8802.060
8802.080
Part No.
E Cable entry, center
Gland plate, depth 10” (250 mm)
Section for cable entry, center
A
B
5
C
D
1
2
2
E
7
2
6
6
1
1
1
4
5
2
8
1
3
1
1
5
6
5
5
1
76
5502.550
5
1
5
1 Gland plate, depth 10” (250 mm)
5 Sliding panel, depth 6” (150 mm)
2 Gland plate, depth 6” (150 mm)
6 Module plate, depth 9” (237.5 mm)
3 Gland plate, depth 4” (100 mm)
7 Self-adhesive foam cable clamp strip
4 Gland plate, depth 2” (50 mm)
8 Section for cable entry, center
Metric measurements for are exact, imperial measurements are rounded
5001.223
Also required:
Base mount,
see page 78.
Note:
Total installation
depth 36” (912 mm)
Make IT easy: Enclosure, power and cooling solutions
Base
Gland plate, TS IT
For enclosure depth 47” (1200 mm)
For enclosure width inches (mm)
A Gland plate set
Packs of
Required
packs of
24 (600)
1 set
1
5502.560
Packs of
Required
packs of
32 (800)
Part No.
Gland plate, solid, with sliding panel, multi-piece
Gland plate modules
5502.570
For enclosure width inches (mm)
24 (600)
32 (800)
Part No.
B 1 module plate as selected
Gland plate, depth 10” (250 mm)
1
3
5001.222
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
7825.366
7825.386
7825.361
7825.381
7825.360
7825.380
Vented with airflow regulator
Cable entry with brush strip
Module plate,
depth
9” (237.5 mm)
Vented
1
1
Cable entry with brush strip, super-airtight
Cable entry, side
5001.223
7825.367
7825.387
–
7825.388
Part No.
C 2 module plates as selected
Gland plate, depth 10” (250 mm)
1
1
5001.222
Gland plate, depth 2” (50 mm)
1
1
5001.210
5001.211
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
Vented with airflow regulator
7825.366
7825.386
Cable entry with brush strip
7825.361
7825.381
7825.360
7825.380
7825.367
7825.387
–
7825.388
Module plate,
depth
9” (237.5 mm)
Vented
1
2
Cable entry with brush strip, super-airtight
Cable entry, side
5001.223
Part No.
D Cable entry, rear or front
Gland plate, depth 10” (250 mm)
1
2
5001.222
Gland plate, depth 6” (150 mm)
1
3
5001.218
5001.219
Sliding panel, depth 6” (150 mm)
1
1
5001.239
5001.240
Self-adhesive foam cable clamp strip, 10 ft. (3000 mm)
1
1
2573.000
2573.000
5001.223
Part No.
E Cable entry, center
Gland plate, depth 10” (250 mm)
1
2
5001.222
5001.223
Gland plate, depth 6” (150 mm)
1
3
5001.218
5001.219
1
1
5001.239
5001.240
1 set
1
8802.060
8802.080
Sliding panel, depth 6” (150 mm)
Section for cable entry, center
A
B
5
C
6
D
6
1
1
1
5
1
1
1
5
1
1
2
1
4
2
2
2
5
6
2
2
1
1
1
1
E
7
5
1 Gland plate, depth 10” (250 mm)
5 Sliding panel, depth 6” (150 mm)
2 Gland plate, depth 6” (150 mm)
6 Module plate, depth 9” (237.5 mm)
3 Gland plate, depth 4” (100 mm)
7 Self-adhesive foam cable clamp strip
4 Gland plate, depth 2” (50 mm)
8 Section for cable entry, center
Make IT easy: Enclosure, power and cooling solutions
8
Also required:
Base mount,
see page 78.
Note:
Total installation
depth 43” (1112 mm)
Metric measurements for are exact, imperial measurements are rounded
77
Base
Gland plate accessories
Clips
for gland plates
As replacement and for additional gland plate
attachments in TS.
Packs of
Part No.
50
8800.075
Material:
Carbon steel
Surface finish:
Zinc-plated
Base mount
for TS IT
To accommodate gland plate modules.
– Tool-free mounting or screw-fastening
– Easily retrofitted and combined with stabilizer
For encl. depth
inches (mm)
Packs
of
Part No.
RAL 7035
Part No.
RAL 9005
24 (600)
2
5501.300
5501.305
Material:
Sheet steel
32 (800)
2
5501.310
5501.315
39 (1000)
2
5501.320
5501.325
47 (1200)
2
5501.350
5501.355
Surface finish:
Spray-finished
Color:
RAL 7035, RAL 9005
Supply includes:
2 mounting rails including assembly parts.
78
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Walls
Sidewalls
Sidewall, divided
For enclosures
for TS IT
– Easy handling and tool-free assembly
– Quick-release fastener including security
lock 3524 E
– Internal latch included (cannot be opened
with a key)
– Lock with chassis, cable clamp rail may be
top-mounted on the outer mounting rail
– Suitable for IT climate control and rack
extinguishing
Depth
inches
(mm)
Packs
of
RAL
7035
Part No.
RAL
9005
Part No.
71 (1800)
32 (800)
1
5501.000
5501.005
79 (2000)
24 (600)
1
5501.010
5501.015
79 (2000)
32 (800)
1
5501.020
5501.025
79 (2000)
39 (1000)
1
5501.030
5501.035
79 (2000)
42 (1050)
1
–
5501.095
79 (2000)
47 (1200)
1
5501.040
5501.045
87 (2200)
32 (800)
1
5501.050
5501.055
87 (2200)
39 (1000)
1
5501.060
5501.065
87 (2200)
42 (1050)
1
–
5501.105
87 (2200)
47 (1200)
1
5501.070
5501.075
Height
inches
(mm)
Material:
Sheet steel
Color:
RAL 7035, RAL 9005
Supply includes:
− 1 console
− 1 pedestal
− Ground conductor
− Assembly parts
Sidewall, solid
For Enclosures:
Material:
Sheet steel, electrophoretic dipcoat-primed,
powder-coated
Color:
RAL 7035, RAL 9005
Supply includes:
2 side panels
Protection category:
IP 55
For Enclosures:
Height
inches x
(mm)
Depth
inches x
(mm)
48 (1200)
24 (600)
48 (1200)
24 (600)
48 (1200)
32 (800)
48 (1200)
32 (800)
79 (2000)
24 (600)
79 (2000)
24 (600)
79 (2000)
32 (800)
79 (2000)
32 (800)
Color
RAL
7035
RAL
9005
–
–
–
–
–
–
–
–
Make IT easy: Enclosure, power and cooling solutions
Part No.
Height
inches x
(mm)
Dpeth
inches x
(mm)
79 (2000)
36 (900)
79 (2000)
36 (900)
79 (2000)
40 (1000)
79 (2000)
40 (1000)
79 (2000)
42 (1050)
79 (2000)
42 (1050)
79 (2000)
48 (1200)
79 (2000)
48 (1200)
87 (2200)
24 (600)
87 (2200)
24 (600)
87 (2200)
32 (800)
87 (2200)
32 (800)
8170.235
87 (2200)
36 (900)
9969.948
87 (2200)
36 (900)
8175.235
87 (2200)
40 (1000)
9969.949
87 (2200)
40 (1000)
8106.235
87 (2200)
42 (1050)
9969.920
87 (2200)
42 (1050)
8108.235
87 (2200)
48 (1200)
9969.916
87 (2200)
48 (1200)
Color
RAL
7035
RAL
9005
–
–
8109.235
9968.597
–
–
8100.235
9968.596
–
9969.309
–
9969.955
–
9969.351
–
9969.956
–
–
8126.235
9969.917
–
–
8128.235
9969.352
–
–
9969.311
9968.595
–
–
9968.593
9968.594
–
–
9969.312
9969.355
–
–
Part No.
9969.957
9969.958
Metric measurements for are exact, imperial measurements are rounded
79
Walls
Partition wall
Cable pass through partition
wall
Height
inches (mm)
Depth
inches (mm)
Part No.
79 (2000)
35 (900)
9971.041
79 (2000)
39 (1000)
9971.042
79 (2000)
42 (1050)
9971.043
79 (2000)
47 (1200)
9971.044
Color:
RAL 9005
87 (2200)
35 (900)
9971.045
87 (2200)
39 (1000)
9971.046
Note:
Use baying connector 8800.490 (see page 81).
Not for use in conjunction with a baying seal.
Can be installed and removed without moving the
cabinet.
87 (2200)
42 (1050)
9971.047
87 (2200)
47 (1200)
9971.048
Height inches
(mm)
Depth inches
(mm)
Part No.
79 (2000)
36 (900)
9978.377
For side partitioning of bayed TS server
enclosures. Installs without the need for additional
hardware or tools. Has four 4.41” (112 mm) cable
pass through holes, grommet covers included.
Solid partition wall
For side partitioning of bayed TS server
enclosures. Installs without the need for additional
hardware or tools.
Color:
RAL 9005
Note:
Use baying connector 8800.490 (see page 81).
Not for use in conjunction with a baying seal.
Can be installed and removed without moving the
cabinet.
80
Metric measurements for are exact, imperial measurements are rounded
79 (2000)
40 (1000)
9978.378
79 (2000)
42 (1050)
9978.379
79 (2000)
48 (1200)
9978.380
87 (2200)
36 (900)
9978.381
87 (2200)
40 (1000)
9978.382
87 (2200)
42 (1050)
9978.383
87 (2200)
48 (1200)
9978.384
Make IT easy: Enclosure, power and cooling solutions
Baying
Connection hardware
Baying connectors, external
Material/surface finish
For mounting on the vertical enclosure sections.
Simply position on the outside and screw-fasten
either from the inside or outside.
Carbon steel, zinc-plated
Packs of
Part No.
6
8800.490
Supply includes:
Assembly parts
Baying bracket
For additional stabilization, or in cases where
mounting panel brackets, swing frame or busbar
supports prevent the installation of angular baying
brackets.
Packs of
Part No.
4
4582.500
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts
Accessories:
For mounting on vertical TS enclosure:
Snap-on nut M8, 8800.808
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
81
Doors/locks
Tubular door frame/handle
Tubular door frame
for rear door, vertically divided, solid door only
Material:
Sheet steel
For enclosures
Packs
of
Part No.
Width
inches (mm)
Height
inches (mm)
1
24 (600)
79 (2000)
1
5501.200
32 (800)
79 (2000)
1
5501.210
Surface finish:
Zinc-plated
Supply includes:
Assembly parts
Note:
Required for use of the automatic door opener.
Comfort handle
for lock insert
Prepared for the installation of lock inserts, safety
and push-button inserts.
Color
Part No.
RAL 7035
8611.020
RAL 9005
8611.350
Material:
Die-cast zinc
Comfort handle
for semi-cylinder
Prepared for the installation of commercially
available semi-cylinder, 1.6 or 1.8” total length.
Design
Part No.
RAL 7035
8611.070
RAL 9005
8611.360
Length:
11.9” (302 mm)
Material:
Die-cast zinc
82
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Doors/locks
Handle/lock systems
Security handle
with code
Flexible access opportunities with
– individual 3-digit code without key or
– with the master key function via an additional
semi-cylinder of 40 or 45 mm to DIN 18 252,
irrespective of the code.
Note:
Security handle combination lock reset tool
available upon request.
Part No.
RAL 7035
comfort handle for TS
7200.800
RAL 9005
comfort handle for TS
9963.601
Material:
Die-cast zinc
Accessories:
− Lock and push-button inserts, see below.
Lock and push-button inserts
For installation in comfort handles that use lock
inserts.
1)
Lock and push-button inserts
For installation in comfort handles that use semicylinder inserts
1)
Make IT easy: Enclosure, power and cooling solutions
Design with
Design
Part No.
Security lock insert
no. 3524 E
8611.1801)
Push-button inserts
8611.190
Push-button and lock
inserts, lock no 1231; no
other lock is possible
8611.200
2 keys included
Design
Part No.
Security lock inserts
no. 3524 E
2467.0001)
Push-button inserts
2468.000
Push-button and lock
inserts, lock no. 2123 E;
no other lock is possible
2469.000
2 keys included
Metric measurements for are exact, imperial measurements are rounded
83
Interior installation
Rail systems
System chassis with
mounting flange, 17 x 73 mm
For TS
For designing a flexible interior installation, or
for accommodating additional components. The
system chassis with mounting flanges may be
attached directly onto a 19” (482.6 mm) mounting
frame horizontally at the rear or in the enclosure
depth between two mounting frames. An
additional screw fastening secures the unit.
Variable, with 5 rows of holes for universal
skeleton structure or partial assembly.
Material:
Sheet steel, zinc-plated, passivated
For inner mounting rail
Enclosure width/
depth inches (mm)
Packs of
Part No.
24 (600)
4
8612.060
32 (800)
4
8612.080
36 (900)
4
8612.090
40 (1000)
4
8612.000
48 (1200)
4
8612.020
Enclosure width/
depth inches (mm)
Packs of
Part No.
24 (600)
4
8612.160
For outer mounting rail
Includes:
Assembly parts
32 (800)
4
8612.180
40 (1000)
4
8612.100
48 (1200)
4
8612.120
German Patent no. 196 47 802
Note:
When selecting a distance between rails outside
of the mounting attachment points, it is advisable
to use the depth-variable system chassis with
mounting flange.
System chassis without
mounting flange, 23 x 73 mm
For PS
Installation options:
− On the vertical enclosure section
− Directly via support brackets TS
− Via adaptor rail for PS compatibility in
conjunction with support brackets PS
− On the horizontal enclosure section
− Directly via support brackets PS
Material:
Sheet steel
Length
inches (mm)
For WHD
inches (mm)
Packs of
Part No.
35 (895)
39 (1000)
4
4382.000
43 (1095)
47 (1200)
4
4378.000
75 (1895)
79 (2000)
4
4380.000
82 (2095)
87 (2200)
4
4381.000
Also required:
Support bracket TS/PS (4183.000), see page 85.
Note:
May be used for TS with adaptor rail,
see page 85.
Surface finish:
Zinc-plated
84
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Interior installation
Rail systems/assembly components
System bars, 23 x 23 mm
For TS/PS
Installation options:
− On the vertical enclosure section
− Directly via support brackets TS
− Via adapter rail for PS compatibility in
Conjunction with angle brackets, mounting
brackets or support brackets PS
− On the horizontal enclosure section
− Directly via angle brackets, mounting brackets
or support brackets PS
Note: The two smallest sizes can also be used for
Flex-Block installations (see page 69 for further
details).
Adapter rail
for TS
Installation in the vertical TS enclosure sections
(across the entire enclosure height or in
subsections) to create compatibility with:
− PS system bars, 23 x 23 mm
− PS system chassis without mounting flange,
23 x 73 mm
− PS system chassis with mounting flange,
23 x 23 mm
Mounting bracket
For TS/PS
For variable attachment of system bar
23 x 23 mm.
Installation options:
– Optionally flush with:
− Outer enclosure edge or
− Enclosure clearance width
– On the vertical TS enclosure section via
− Adaptor rail for PS compatibility,
see above
– On the horizontal TS enclosure section
– On enclosures and rails with rectangular
system hole patterns 12.5 x 10.5 mm
Support bracket
For TS/PS
For the attachment of system chassis without
mounting flange, 23 x 73 mm or system bars,
23 x 23 mm.
Installation options:
− On the vertical TS enclosure section via
− Adaptor rail for PS compatibility (8800.380)
− On the horizontal TS enclosure section
− On enclosures and rails with rectangular
hole patterns, 12.5 x 10.5 mm.
Material:
Die-cast zinc
Make IT easy: Enclosure, power and cooling solutions
Length
inches (mm)
For WHD
inches (mm)
Packs
of
Part No.
18 (445)
24 (600)
12
4171.500
4172.500
25 (645)
24 (600)
12
75 (1895)
79 (2000)
6
4177.000
82 (2095)
87 (2200)
6
4178.000
Material:
Sheet steel, zinc-plated, passivated
Note:
Requires mounting bracket 4182.000, see below,
for uses other than Flex-Block.
For enclosure height
inches (mm)
Packs of
Part No.
72 (1800)
4
8800.380
79 (2000)
4
8800.300
87 (2200)
4
8800.320
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly screws
Packs of
Part No.
24
4182.000
Material:
Die-cast zinc
Supply includes:
1 set = 1 mounting bracket, 1 screw M6 x 12 mm,
1 cage nut M6
Also required:
− U nuts for system bars (recommended: M6,
4179.000), see page 86
− Multi-tooth screws M6 x 12 mm (2504.500),
see page 88
Packs of
Part No.
24 set
4183.000
Supply includes:
1 set =
1 support bracket,
2 countersunk screws,
2 serrated lock washers.
Also required:
− U nuts for system bars (recommended: M6,
4179.000), see page 86
− Multi-tooth screws M6 x 12 mm (2504.500),
see page 88
Metric measurements for are exact, imperial measurements are rounded
85
Interior installation
Assembly components
U nuts
For
– System bars 23 x 23 mm
– System chassis without mounting flange,
23 x 73 mm
– System chassis without mounting flange,
45 x 88 mm
– System chassis with mounting flange,
23 x 73 mm
For mounting system bars and system chassis
without mounting flanges on angle brackets,
mounting brackets and support brackets, we
recommend U nuts with M6 thread (4179.000).
Thread
Packs of
Part No.
M4
20
4119.000
M5
20
4157.000
M6
20
4179.000
M8
20
4180.000
Accessories:
Multi-tooth screws M6 x 12 mm, (for 4179.000),
see page 88
Mounting plate
Screw-fastened, small
Packs of
Part No.
4
4532.000
Material:
Carbon steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws
Detailed drawings:
Available at www.rittal.us
Mounting bracket
May be screw-fastened onto all enclosures and
mounting parts with 25 mm hole patterns.
Material:
Carbon steel
Surface finish:
Zinc-plated
Supply includes:
Assembly screws
Material:
Carbon steel
Part No.
4
4597.000
Accessories:
− Screws, see page 98.
− Cable tie for fast assembly 2597.000,
see page 97.
Detailed drawings:
Available at www.rittal.us
Mounting plate
Locatable
on
– the vertical TS enclosure section
– TS system chassis with mounting flange,
17 x 73 mm
Packs of
Packs of
Part No.
4
8612.400
Supply includes:
Assembly screws
Detailed drawings:
Available at www.rittal.us
Surface finish:
Zinc-plated
86
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Interior installation
Assembly components
Mounting plate
Screw-fastened, large
On all enclosures and mounting parts with 25 mm
hole patterns.
Material:
Carbon steel
Packs of
Part No.
4
8612.410
Detailed drawings:
Available at www.rittal.us
Surface finish:
Zinc-plated
Supply includes:
Assembly screws
Front-mounting cage nut,
19” (482.6 mm)
The cage nut consists of an expanding nut which
is simply inserted into the square attachment hole
at the front and then secured with the assembly
screw. When tightening the screw, the cage
expands and thus secures the required
components. Clamping range from 0.05 – 0.18”
(1.2 – 4.5 mm). Multi-tooth screw head, bit size T
30.
Material:
Sheet steel
Captive nut M5/M6
For the attachment of rack-mounted electronic
equipment, 19” (482.6 mm) installed equipment
and blanking plates to mounting rails, 19” (482.6
mm). For use with metal thickness from 20 – 14
ga (0.8 – 2.0 mm). In areas of narrow tolerance,
captive nuts for metal thicknesses of
18 – 16 ga (1.2 – 1.5 mm) should be used.
Optionally with or without contact of the installed
equipment to the 19” (482.6 mm) section/
enclosure.
Dimensions
mm
Size of
mounting hole
inches (mm)
Packs of
Part No.
M6 x 16
0.37 x 0.37
(9.5 x 9.5)
50
2094.400
For metal
thicknesses
ga (mm)
Packs
of
Part No.
With contact
20 – 14
(0.8 – 2.0)
50
2094.500
Without contact
20 – 14
(0.8 – 2.0)
50
2092.500
For metal
thicknesses
ga (mm)
Packs
of
Part No.
With contact
20 – 14
(0.8 – 2.0)
50
2094.200
Without contact
20 – 14
(0.8 – 2.0)
50
2092.200
With contact
18 – 16
(1.2 – 1.5)
50
2094.300
Without contact
18 – 16
(1.2 – 1.5)
50
2092.300
For metal
thicknesses
ga (mm)
Packs
of
Part No.
20 – 14
(0.8 – 2.0)
50
9957.324
Surface finish:
Zinc-plated
Supply includes:
− 50 expanding nuts
− Assembly screws
− Plastic washers
Captive nut M5
Design
Captive nut M6
Design
Captive nut 10/32
Design
Without contact
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
87
Interior installation
Assembly components
1
1
Multi-tooth screw
M6 x 12 to fit:
– Snap-on nuts (8800.806)
– U nuts for system bars (4179.000)
– Captive nuts (4164.000)
– Threaded blocks (4162.000)
Multi-tooth drive for optimum transmission of
torque, an extended tool life and increased
safety and reliability when tightening and
loosening screw connections.
Dimensions mm
Packs of
Part No.
M6 x 12
300
2504.500
M8 x 12
300
2504.800
Multi-tooth screws
M8 x 12 to fit:
– Snap-on nuts (8800.808)
2
2
Metal multi-tooth screw
Metal multi-tooth screws
5.5 x 13
For the round holes 4.5 mm diameter in the
enclosure section, system bars and system
chassis without mounting flanges
3
3
300
2486.500
Metal multi-tooth screws for stainless steel
5 x 13
300
2486.300
500
2504.000
Self-tapping hex screws
Self-tapping screw
M5 x 10
For the round holes 4.5 mm diameter in the
enclosure section, system bars and system
chassis without mounting flanges
Self-tapping posidrive raised countersunk screws
M5 x 12
500
2488.000
Self-tapping pan-head screws, posidrive
4
4
Self-tapping screw
M5 x 12
Mark, drill and tighten in a single operation using
electric or pneumatic tools
For metal thickness: 20 – 11 ga (0.8 – 3 mm)
Length: 0.6” (16 mm)
Usable length: 0.4” (9.5 mm)
Width across flats: 0.3” (8 mm)
2489.000
M5 x 12
500
2489.500
300
2487.000
Self-tapping screws
ST 4.8 x 16
Assembly screws M6 x 0.63”
(16 mm), M5 x 0.63” (16 mm)
For captive nuts, 19” (482.6 mm) enclosure mount
components and blanking panels. Plastic washers
included.
1)
88
500
Self-tapping multi-tooth pan-head screws
Type
Packs of
Part No.
Slotted screw M6
50
7094.110
Phillips screw M6
50
7094.1001)
Phillips screw M5
50
7094.120
Included standard with TS8 network and server
enclosures in this publication.
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Interior installation
Component shelves
Component shelf, fixed depth
static installation
For static installation between 19” (482.6 mm)
mounting rails.
Load capacity:
55 lbs (25 kg) surface load, static
Component
shelf depth
inches (mm)
Packs of
Part No.
10 (250)
1 set
5501.615
16 (400)
1 set
5501.625
Material:
Sheet steel
Surface finish:
Spray-finished
Color:
RAL 9005
Supply includes:
Assembly parts.
Component shelf, depth
variable, static installation
For static installation between two
19” (482.6 mm) mounting rails.
– Depth-variable to adapt to individual distances
between rails
– Tool-free, time-saving one-man assembly
Material:
Sheet steel
Surface finish:
Spray-finished
Distance
between
rails
inches (mm)
Load
capacity,
static
lbs (kg)
Height
U
Packs
of
Part No.
16–24
(400–600)
110
(50)
½
1 set
5501.655
24–35
(600–900)
110
(50)
½
1 set
5501.665
16–24
(400–600)
220
(100)
1
1 set
5501.695
24–35
(600–900)
220
(100)
1
1 set
5501.705
Color:
RAL 9005
Supply includes:
Assembly parts.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
89
Interior installation
Component shelves/handle/drawer
Component shelf, depth
variable, pull-out
Surface finish:
Spray-finished
For mounting between two 19” (482.6 mm)
mounting rails.
– Depth-variable to adapt to individual distances
between rails
– Tool-free, time-saving one-man assembly from
the enclosure front
– Self-locking
– Fully extendible
Supply includes:
− Installation kit
− Telescopic slide with mounting kit
− Assembly parts
Accessory:
Handle, 3636.010, see below.
Material:
Sheet steel
Distance
between rails
inches (mm)
Color:
RAL 9005
Load capacity,
static
lbs (kg)
Height
U
Depth
inches (mm)
Packs of
Part No.
16–24 (400–600)
110 (50)
1
20 (500)
1 set
5501.675
24–35 (600–900)
110 (50)
1
28 (700)
1 set
5501.685
16–24 (400–600)
220 (100)
1½
20 (500)
1 set
5501.715
24–35 (600–900)
220 (100)
1½
28 (700)
1 set
5501.725
Handle
for pull-out component shelves
All component shelves have mounting holes for
handles.
Packs of
Part No.
2
3636.010
Material:
Die-cast zinc
Surface finish:
Spray-finished, silver-grey
Supply includes:
Assembly parts
Pull-out drawer
For front attachment to mounting rails. With
cover and telescopic slides to accommodate
assignment lists, operating manuals and small
parts. The 2 U version is also suitable for
mounting inside a swing frame. Fully assembled,
including assembly parts.
Clearance
openings
Install
depth
inches
(mm)
Packs
of
Part No.
16 (419)
17 (427)
1
5502.305
16 (419)
17 (427)
1
5502.325
U
Width
inches
(mm)
Depth
inches
(mm)
2
16 (411)
3
16 (411)
Material:
Sheet steel
Color:
RAL 9005
90
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Interior installation
Slide rails
Telescopic support rail,
heavy duty
Packs of
Part No.
2
9963.499
These telescopic support rails are designed to
support components from underneath, and can
support up to 200 lbs (91 kg). Rails extend from
22” (560.5 mm), totally retracted, to 30” (762 mm),
totally extended.
Supply includes:
2 support rails
Slide rails, static installation
For mounting between a front and a rear pair of
mounting rails.
– To support heavy installed equipment
– Side system hole pattern for mounting
accessories and cooling components that
expel to the side
– Fit into the system hole pattern of the TS IT
Technical specifications:
Load capacity: 176 lbs (80 kg), static
Material:
Sheet steel
Slide rails, depth-variable
For mounting between a front and a rear pair of
mounting rails.
– To support heavy installed equipment
– To adapt to individual distances between rails
– Tool-free, time-saving one-man assembly from
the enclosure front
– All three mounting holes are available for
screw-fastening the equipment
U
19” (482.6 mm)
distance
between rails
inches (mm)
Packs of
Part No.
1
14 (345)
2
5501.410
1
18 (445)
2
5501.420
1
21 (545)
2
5501.430
1
25 (645)
2
5501.440
1
29 (745)
2
5501.450
Surface finish:
Zinc-plated
Supply includes:
Assembly parts
19” (482.6 mm)
distance
between rails
inches (mm)
Load
capacity
lbs (kg)
Packs
of
Part No.
16-24 (400-600)
176 (80)
2
5501.460
24-35 (600-900)
331 (150)
2
5501.480
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
91
Interior installation
Slide rails/mounting kit
Slide rails, static installation
For mounting between two 19” (482.6 mm)
mounting rails.
– System hole pattern for mounting accessories
and cooling active components
Technical specifications:
Load capacity: 66 lbs (30 kg), static
Material:
Sheet steel
92
Length
inches (mm)
Packs of
Part No.
2
6 (150)
2
5501.400
Surface finish:
Zinc-plated
Supply includes:
Assembly parts
Mounting kit
for 19” (482.6 mm) equipment
Facilitates fast, simple integration of additional
mounting space within an enclosure by attaching
to the enclosure frame or to the existing mounting
rails at the sides. The flexible slot fastening of the
brackets means that the distance between the two
installation brackets may be freely selected, so
that other 19” (482.6 mm) attachment dimensions
may be implemented. The second row of holes is
used for the optional configuration of additional
mounting surfaces.
U
U
Color
Packs
Part No.
1
Black
2
9970.986
2
Sheet steel
2
7246.420
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Assembly parts
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Interior installation
System lights
LED system light
Supply includes:
Light with clip, screw mounting kits, assembly
parts
in 24 V DC version
– Max. EMC capacity
– Safe, economical and low maintenance
– Integral through-wiring
– Universal attachment options
– Vertically hinged light cone
Also required:
− LED connection cable, see page 94 or
− Door-operated switch with LED connection
cable, see page 104
Material:
− Light body: Extruded aluminum
− Light cover: Polycarbonate (halogen-free)
− Light ends: PC-ABS
Accessories:
− Mounting kit magnet, see below
− Adaptor power pack, see page 94
Note:
Only intended for use in enclosures and sealed
cases. When using on customer-supplied power
packs, it is important to obtain the requisite
approvals depending on the application.
Color:
Similar to RAL 7035
Protection rating:
IP 20 to IEC 60 529
Part No.
4140.810
4140.820
Rated voltage
4140.830
4140.840
24 V DC (± 10%)
No. of LEDs
10
20
Width (B1) inches (mm)
9 (230)
13 (330)
17 (430)
21 (530)
Mounting distance CLIP (B2) inches (mm)
7 (175)
11 (275)
15 (375)
19 (475)
Mounting distance, screw attachment (B3) inches (mm)
10 (250)
14 (350)
18 (450)
22 (550)
0.08
0.12
0.16
Protection rating
40
III (SELV)
0.04
Rated current (A)
1)
Circuit-breakers
1)
30
Integral on/off/door-operated switch mode
Maximum baying up to a total rated current strength of 2 amps.
B2
8.2
32.8
B3
B1
20.64
Mounting kit magnet
For reliable adhesion on all carbon steel surfaces.
Make IT easy: Enclosure, power and cooling solutions
Packs of
Part No.
2
4140.000
Metric measurements for are exact, imperial measurements are rounded
93
Interior installation
System light accessories
Connection accessories
for LED system light
1
1
2
Length inches (mm)
Packs of
Part No.
LED connection cable
118 (3000)
1
4315.800
Interconnecting cable
Length inches (mm)
Packs of
Part No.
4 (100)
1
4315.830
Connection cable
2
LED interconnecting cable
24 (600)
1
4315.840
39 (1000)
1
4315.850
Adaptor power pack
Technical spec.
Packs of
Part No.
Adaptor power pack
120V AC/24 V DC
1
9970.194
Door operating switch
Switches the enclosure light on when the door
is opened and switches the air conditioner off to
prevent condensation.
94
Metric measurements for are exact, imperial measurements are rounded
Door operating switch
without power cord
Packs of
Part No.
1
4127.010
Make IT easy: Enclosure, power and cooling solutions
Interior installation
Grounding
Central grounding point
For connecting
– Ground straps
– Grounding braids
to the vertical and horizontal enclosure profile.
The connection bracket is connected to the
enclosure frame with 2 screws and is securely
contacted. Ground connection is carried out via
the threaded bolt M8 x 0.8” (20 mm).
Packs of
Part No.
10
7829.200
Supply includes:
− 1 connection bracket
− 2 screws 5.5 x 0.5” (13 mm)
− 2 serrated washers
− 1 nut M8
− 1 contact washer M8
− 1 washer
Material:
Carbon steel, zinc-plated
Complete grounding kit
To DIN EN 60 950/VDE 0805, Ø 4 mm2, Imax. 40 A
For system-compatible grounding of all enclosure
parts on the enclosure frame according to VDE.
The ground conductors are preassembled ready
for connection with connectors and cut to the
correct length.
Packs of
Part No.
1 set
7829.150
Supply includes:
− 8 grounding straps
− Central grounding point and assembly parts
ESD connection point
Dangerously high potential differences can occur
during maintenance or conversion work on the
enclosure. To protect sensitive electronic
components, this standardized connection point
(push button) provides potential equalization.
The connection point is directly conductivity
connected to the enclosure frame via two screws.
Packs of
Part No.
1
7752.950
Material:
Carbon steel, zinc-plated
Supply includes:
Assembly parts
Ground rail, horizontal
Potential equalization rail, Current carrying
capacity approx. 200 A.
Length
inches (mm)
Packs of
Part No.
18 (450)
1
7113.000
Supply includes:
− Rail made from E-Cu 57 to DIN 12 163,
DIN EN 13 601, 15 x 5 mm
− 20 connection points with M5 screws
− 2 ground connections, 25 mm2
− 2 isolators, including assembly parts
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
95
Interior installation
Grounding
Grounding kit, preassembled
For star grounding. With the preassembled
ground conductors on a potential equalization rail,
star potential equalization is easily integrated into
network enclosures.
Supply includes:
− Ground rail made from E-Cu 57 to
DIN EN 12 163, DIN EN 13 601
− 16 grounding leads, 6 mm2
− 2 insulators
− Assembly parts
Ground rail, vertical
Easily fitted to the 25 mm DIN pitch pattern of
distributors or to the 19” (482.6 mm) mounting
rails. The supplied ground conductors facilitate
star grounding of the cable clamp straps in the
patch panels. The ground terminals are fully
adjustable. Current carrying capacity of rail
approx. 200 A.
Supply includes:
− Ground rail made from E-Cu 57 to
DIN 12 163, DIN EN 13 601, 15 x 5 mm
− 16 conductor connection clamps,
(2.5 – 16 mm2)
− 15 grounding leads, 6 mm2, L = 20” (500 mm)
− Assembly parts
Extension kit
for ground rail, vertical
For system-compatible expansion of the star
grounding on the vertical potential equalization
rail.
For TS enclosures up to
H x W x D inches (mm)
Packs
of
Part No.
79 x 32 x 32
(2000 x 800 x 800)
1 set
7829.100
87 x 32 x 39
(2200 x 800 x 1000)
1 set
7829.110
For enc.
height
inches (mm)
Length
inches (mm)
Packs
of
Part No.
32 (800)
24 (600)
1 set
7541.000
39 (1000)
32 (800)
1 set
7542.000
47 (1200)
39 (1000)
1 set
7543.000
55 (1400)
47 (1200)
1 set
7544.000
63 (1600)
55 (1400)
1 set
7545.000
71 (1800)
63 (1600)
1 set
7546.000
79 (2000)
71 (1800)
1 set
7547.000
87 (2200)
79 (2000)
1 set
7548.000
Packs of
Part No.
10
7549.000
Supply includes:
− 15 grounding leads 6 mm2, L = 20” (500 mm)
− Preassembled, with ring
terminal and wire end ferrule
− Ground terminals, (2.5 – 16 mm2)
− Assembly parts
96
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Cable management
Routing
Cable management panel
The cable routing chamber has cut-outs from
above, into which the patch cables can be
inserted. The cable management panel is
equipped with a flap and quick-release fasteners
at the front, for optimum access to the cables.
From the rear, the cables can be inserted via a
cut-out with brush strips. With accommodation
facility for cable clamp straps 7610.000 or
7611.000.
U
Depth
inches (mm)
Packs
of
Part No.
2
3 (85)
1
5502.235
Color:
RAL 9005
Accessories:
Cable clamp straps, see below.
Material:
Sheet steel
Horizontal cable management
with hingeable/removable
cover
Attaches to the 19” rack mount and provides
cable management side to side. Available in 1 U
or 2 U.
Cable Diameter (sq. in.)
Description
Packs
of
0.15
0.17
0.19
0.21
0.23
0.25
0.27
1U
2
260
202
162
132
110
93
80
9969.736
2U
2
127
98
79
64
54
45
39
9969.597
Cable clamp strap
for patch panels
To provide strain relief of incoming or outgoing
data cables. Optionally available with spring
brackets for accommodating and contacting the
cable screen. Connection to the patch panel is by
means of bolts on the panel itself.
Part No.
Design
Packs
of
Part No.
Without cable screen contact
1
7610.000
With spring clips for
contacting the cable screen
1
7611.000
Material:
Carbon steel, 14 ga (2.0 mm), zinc-plated
Supply includes:
Assembly parts
Cable tie
The super-fast solution for fastening cables to the
enclosure profile or mounting system parts.
Simply clip into the round hole patterns.
Make IT easy: Enclosure, power and cooling solutions
Length
inches (mm)
Packs of
Part No.
6 (150)
100
2597.000
Metric measurements for are exact, imperial measurements are rounded
97
Cable management
Routing
Nylon tape
For tidy cable routing. Supplied on a reel for
cutting to the required length.
Unlike cable ties, nylon tape
– protects the cable sheathing
– is easily reopened and
– is reusable
Nylon loop
With the nylon loop, secured cables are easily
released, allowing individual cables to be added
or removed. Ideal for sensitive data cables
(fiber-optic/Cu), as it avoids indentations on the
cable sheathing. In addition, the nylon loop may
be screw-fastened to the round system holes or
attached using a quick-release fastener.
Length
ft (mm)
Width
inches (mm)
Packs of
Part No.
16 (5000)
0.6 (16)
1
2203.400
Width
inches
(mm)
Length
inches
(mm)
Max. cable
diam.
inches
(mm)
PU
Part No.
0.8 (20)
5 (130)
1.2 (30)
10
7072.220
0.8 (20)
0.8 (20)
2.0 (50)
10
7072.230
0.8 (20)
12 (300)
3.5 (90)
10
7072.240
Also required:
Screw 2486.500 for screw-fastening to the
round hole pattern, see page 88.
Color:
Black
Supply includes:
Quick-release fastener
Quarter-turn cable fastener
Adjustable hook and loop fastening strap provides
flexibility for bundling cables. Strap attaches to
cabinet with a quarter turn base.
Quarter-turn nylon tape
supports
Strap length
inches (mm)
Packs of
Part No.
17 (420)
10
9969.599
Packs of
Part No.
10
5502.155
– For simple, fast cable attachment
– Tool-free mounting in the system hole pattern
with a quarter rotation
– Direct use on the horizontal TS section, on the
support strips and mounting rails of the
19” (482.6 mm) interior installation on the cable
route or on system chassis with mounting
flanges
– Length of nylon tape: 16” (400 mm)
Material:
Plastic
Supply includes:
10 supports including nylon tape
98
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Cable management
Routing
Packs of
Part No.
20
5502.405
75
– For system-compatible cable deflection while
complying with minimal bending radii and to
accommodate surplus cables and excess
length. The elements may optionally be used
individually or in combination for cable routing.
They may be combined into semi-circular or
circular elements.
– Suitable for use on corners and edges to allow
protected cable routing around them.
– Mounting clips for use above the arc hold the
routed cables back within the elements. The
elements are also bayable in an axial direction
to allow U-based cable routing to the mounting
rail, or channelling of the cable sections.
50
Cable manager
50
44
75
Material:
Plastic, UL 94-V0
Color:
RAL 9005
Supply includes:
Mounting clips and assembly parts
Cable guide ring
For flexible, system-compatible cable routing at
the side of the 19” (482.6 mm) mounting frame or
on 19” (482.6 mm) mounting rails.
Material:
Carbon steel, zinc-plated
Dimensions
inches (mm)
Packs of
5 x 3 (125 x 85)
10
7111.900
5 x 3 (125 x 65)
10
7111.000
3 x 2 (85 x 43)
10
7112.000
Part No.
Supply includes:
Mounting accessories
Quarter-turn cable collection
Collection claw organizes cables and can attach
to the enclosure frame and EIA rails.
Make IT easy: Enclosure, power and cooling solutions
Width x depth
inches (mm)
Packs
of
Part No.
3.00 x 4.45 (76.2 x 113)
10
9969.600
Metric measurements for are exact, imperial measurements are rounded
99
Cable management
Routing
Quarter-turn D-ring
D-ring organizes cables and can be used on
enclosure frame and side of EIA rails.
Cable management panel,
19” (482.6 mm)
Surface finish:
Ring: Zinc-plated
Packs
of
Part No.
5.00 x 3.50” (127 x 88.9 mm)
10
9961.780
3.50 x 1.75” (88.9 x 44.5 mm)
10
9961.779
Ring size
inches (mm)
Packs of
Part No.
1
2 x 3 (43 x 55)
1
5502.205
1
4 x 2 (105 x 43)
1
7257.005
2
5 x 3 (125 x 85)
1
7257.1051)
U
For horizontal management of the patch cables,
with 5 cable cable guide rings.
Material:
− Panel: Carbon steel
− Ring: Steel
Description
1)
Extended delivery times.
Note:
The sizes given are external dimensions.
Color:
RAL 9005
Cable routing bars
For structured routing of entire cable bundles, the
cable routing bars may be secured to a variety of
different positions inside the enclosure.
Material:
− Support: Sheet steel
− Cable routing bars, connection combs: Plastic
Color:
RAL 9005
Supply includes:
− Cable routing bars
− Connection combs
19” (482.6 mm) attachment
For horizontal cable routing within the distributor
level. Thanks to their open mounting holes, they
can also be retrospectively slotted onto the
19” (482.6 mm) rails at any time and secured
with the existing mounting screws of the installed
components.
All-round attachment for universal use
For vertical and horizontal cable routing inside the
enclosure or within the distributor level.
100
Metric measurements for are exact, imperial measurements are rounded
U
No. of
connection combs
Packs
of
Part No.
4
1
2
4
7111.224
5
10
7111.214
U
No. of
connection combs
Packs
of
Part No.
4
2
4
7111.222
1
5
10
7111.212
Make IT easy: Enclosure, power and cooling solutions
Cable management
Routing
Cable finger, 6 U
– For U-based cable routing
– Simple, tool-free assembly
– Cable routing possible in conjunction with
air baffle plates
Packs of
Part No.
14
5502.115
Material:
Plastic, UL 94-V0
Color:
RAL 9005
Cable duct
High packing density due to U-based cable
routing
– Removable duct cover hinged on both sides
Optional cable slack spool may be used
(7827.330, see below)
– Suitable for back-to-back baying
– Simple assembly with tool-free quick-release
fastening
– Alternatively suitable for screw-fastening
Material:
Sheet steel, plastic UL 94 V0
For enclosure
height
inches (mm)
U
Packs
of
Part No.
79 (2000)
36
1
5502.105
87 (2200)
42
1
5502.145
Color:
RAL 9005
Supply includes:
Cover and assembly parts
Cable slack spool
For use with cable duct (see above).
Cable management panel
with cable routing bars
19” (482.6 mm)
For horizontal management of the patch cables
with cable routing bars. Opening the individual
cable routing bars allows user-friendly
modification and extension of the cabling.
Packs of
Part No.
4
7827.330
U
Aprox. bar
depth
mm (inches)
No. of
bars/U
Packs
of
Part No.
1
3 (80)
5
1
5502.225
Material:
− Panel: Sheet steel, spray finished
− Cable routing bars: Plastic
Color:
− Panel: RAL 9005
− Cable routing bars: Black
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
101
Cable management
Routing
Cable routing channel
19” (482.6 mm)
To hold the patching cables.
U
Depth
inches (mm)
Packs
of
Part No.
1
3 (85)
1
5502.245
Material:
Sheet steel
Color:
RAL 9005
Cable entry panel
19” (482.6 mm)
Cut-out 15” x 1 U (390 x 44 mm) or 15” x 2 U (390
x 89 mm) with brush insert. With accommodation
facility for cable clamp straps 7610.000 or
7611.000.
U
Packs
of
Part No.
1
1
5502.255
2
1
5502.265
Material:
Sheet steel
Color:
RAL 9005
Accessories:
Cable clamp straps, see page 97.
Roof system supports
for cable routes
The depth-variable support system may be
attached to all 32 – 47” (800 – 1200 mm) deep TS
enclosures with external screw-fastening of the
roof plate. The integral hole pattern, for screws
or cage nuts, support the attachment of most
common cable route systems. May be combined
with TS IT fan mounting plate In combination
with system bar, suitable for accommodating
additional cable guide rails or pipelines.
Color
Part No.
2
RAL 7035
7831.472
2
RAL 9005
5502.135
Material:
Sheet steel
Surface finish:
Powder-coated
Accessories:
− Metal multi-tooth screws 5.5 x 13 mm,
2486.500, see page 88.
− Cage nuts M6, 8800.340.
Cable route
For cable clamping and routing with network
and server applications
– Mounting across the entire depth with 32”
(800 mm)
width, mounting only behind the second
19” (482.6 mm) pair of mounting rails with
24” (600 mm) width
– Tool-free, fast assembly
– Alternatively suitable for screw-fastening
– Multi-functional openings for cable
management accessories
Packs of
Height
inches (mm)
Packs of
Part No.
79 - 87
(2000 – 2200)
1
5502.120
Accessories:
− Cable ties, nylon loops, see page 97, 98.
− Cable guide rings, see page 99.
− Cable routing bars, see page 100.
Material:
Sheet steel
Color:
RAL 9005
102
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Cable management
Routing
Cable management panel
Organizes and stores cables in the 0 U space.
Includes attachment points for tool-less quarter
turn cable management accessories and PDU
mounting locations. Attaches securely to the
frame.
Dimensions
Height
inches
(mm)
Width
inches
(mm)
Packs of
Part No.
79 (2000)
8 (215)
1
9978.360
87 (2200)
8 (215)
1
9978.361
Color:
RAL 9005
Note:
Only for use in 24 - 28” (700 - 800 mm) wide
cabinets.
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
103
Ventilation
Fans
Fan mounting plate
Supply includes:
− Fan unit
− 2 fans
− 1 thermostat
− Open connection cable
− Assembly parts.
Technical specifications for one fan:
Uses 7980.000 fans, see below for further details.
Note:
Connection via distributor box or country-specific
connector.
for TS IT
For active ventilation. For use in the cut-out
integrated into the roof plate. The unit may
optionally be extended with additional fans.
Technical specifications of thermostat:
− Rated operating voltage: 250 V
− Temperature range: +41° to +131° F
(+5° to +55° C)
WxD
inches (mm)
Number of
prewired fans
Possible
number of fans
32x24, 24x39, 24x47
(800x600, 600x1000, 600x1200)
2
3
32x32, 32x39, 32x47
(800x800, 800x1000, 800x1200)
2
5502.010
–
5502.015
–
6
5502.020
–
For retrofitting various fan units or to supplement
the fan mounting panel and modular fan roof.
Technical specifications 7980.100, 110:
− Rated operating voltage: 230 V~
− Power consumption: 14/12 W at 50/60 Hz
− Air throughput (unimpeded air flow):
64/71 cfm (108/120 m3/h), 50/60 Hz
− Noise level (unimpeded air flow): 34 dB (A)
− Operating temperature range:
–4° to +158° F (–20° to +70° C)
Part No.
RAL 7035
–
Fan expansion kit
Technical specifications 7980.000:
− Rated operating voltage: 230 V~
− Power consumption: 15/14 W at 50/60 Hz
− Air throughput (unimpeded air flow):
94/106 cfm (160/180 m3/h), 50/60 Hz
− Noise level (unimpeded air flow): 37 dB (A)
− Operating temperature range:
+14° to +131° F (–10° to +55° C)
Color
RAL 9005
5502.025
Dimensions
WxHxD
inches (mm)
Packs of
Part No.
5 x 5 x 1 (119 x 119 x 25)
1
7980.110
5 x 5 x 2 (119 x 119 x 38)
1
7980.000
5 x 5 x 1 (119 x 119 x 25)
1
7980.100
5 x 5 x 2 (119 x 119 x 38)
1
7980.148
Supply includes:
− Fans
− Assembly parts
− Connection cable 24” (0.61 m)
Technical specifications 7980.148:
− Rated operating voltage: 48 V (DC)
− Power consumption: 7.7 W
− Air throughput (unimpeded air flow):
108 cfm (184 m3/h)
− Noise level (unimpeded air flow): 43 dB (A)
− Operating temperature range:
–4° to +158° F (–20° to +70° C)
104
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Ventilation
Fans
Air baffle plate
Width x height
inches (mm)
Packs
of
Part No.
24 x 79 (600 x 2000)
1 set
5501.805
for TS IT
– To separate the hot/cold zones within an
enclosure with aisle containment or when
using an LCP system
– With all-round brush strip for collision-free
shielding with installed bar systems on the
outer mounting rail
– For width 32” (800 mm), 6 U blanking panel
additionally included
Surface finish:
Spray-finished
Material:
Sheet steel, plastic UL 94 V0
Supply includes:
Assembly parts
Cover, magnetic
For optionally covering the front mounting rail
holes in the event of complete air blocking of the
front, or in the absence of installed cable fingers.
Split rear door fan
Split rear door fans take advantage of the
front to rear airflow of most servers. The design
allows for positioning the fan assembly in the
most critical location within the cabinet. Two high
pressure fans provide the ability to exhaust hot
air out the rear of the enclosure at a dramatically
higher rate than traditional roof mount fan trays.
The result is cooler operating equipment, even
with very high enclosure heat loads.
Volts
Total cfm (m3/hr)
208
Make IT easy: Enclosure, power and cooling solutions
1 set
5501.815
1 set
5501.825
32 x 87 (800 x 2200)
1 set
5501.835
Length
ft. (mm)
Packs of
Part No.
16.4 (5000)
1
5501.895
Supply includes:
– 2 fans per assembly (210 cfm total)
– Includes 10 ft (3048 mm) cord/plug,
mounting hardware
– Can be used for venting through roof by
installing system bars/dual brackets (not
included)
Enclosure width
inches (mm)
110
210
(356)
32 x 79 (800 x 2000)
24 x 87 (600 x 2200)
24 - 39
(600 - 1000)
Color
Part No.
RAL 7035
9969.936
RAL 9005
9969.937
RAL 7035
9969.938
RAL 9005
9969.939
Metric measurements for are exact, imperial measurements are rounded
105
Ventilation
Aisle Containment
– Energy efficiency can be
enhanced
– Performance of cooling system
can be enhanced
– Superior output density is
facilitated by a consistent cool
air supply
– Can be installed within existing
data center to extend the life of
the facility
By providing a chamber to contain the air and
keep cool air in front and heated air behind
individual units cooling efficiency can be
enhanced. Aisle containment is a combination of
door and roof components to facilitate consistent
separation of air in the data center.
Depending upon individual applications, aisle
containment may be used with CRAC systems or
Rittal TopTherm LCP Inline CW and DX as hot or
cold aisle containment.
Supply includes:
– Slimline door element with
viewing window, sliding door
– Stable roof elements of
composite metal
– High level of light penetration
– May be used with safety glass
where required
Benefits:
– Relatively low-cost, easily
implemented solution, can be retrofitted
– Fully compatible with existing enclosure
systems
12
00
00
0/8
2000
60
Roof panel
Roof support rail
Door assembly
Position
Attaches to
roof support
rail
Attaches to top
of the enclosures
Attaches to the top of the
enclosures at the end of the aisle
Part No.
9978.497
9978.499
9978.500
9978.501
9978.502
9978.503
9978.504
9978.505
Width
inches (mm)
32 (800)
–
–
–
–
–
–
–
Depth
inches (mm)
48 (1219)
32 (800)
24 (600)
12 (300)
–
–
–
–
Height of aisle
inches (mm)
–
–
–
–
79 (2000)
87 (2200)
79 (2000)
87 (2200)
Width of aisle
inches (mm)
48 (1219)
48 (1219)
48 (1219)
48 (1219)
48 (1219)
48 (1219)
48 (1219)
48 (1219)
Enclosure
depth
inches (mm)
–
–
–
–
42 (1050)
42 (1050)
47 (1200)
47 (1200)
Chimney
Chimney design directs hot air toward ceiling
ducts through the top of the roof at the rear of a
cabinet. Conditioned air enters the perforated
front door and is pulled through via component
fans. A solid rear door directs air upward to the
roof and chimney, isolating the hot air to improve
efficiency. Designed to remove heat and reduce
energy costs by separating air paths, chimney
units are adjustable. The flexible design, which
can expand from 20 to 34", accommodates
varying ceiling heights. Passive solutions can
be used on 42 U and 47 U, 24 – 32” (600 – 800
mm) wide and 42 – 47” (1050 – 1200 mm) deep
enclosures. Existing installations can be retrofitted
using a modified roof and appropriately sized
chimney.
Passive Chimney
Adjustable height range
inches (mm)
Part No.
20 – 34 (508 – 864)
9979.454
Replacement Roof
Width x Depth
inches (mm)
Part No.
24 x 42 (600 x 1050)
9979.441
28 x 42 (700 x 1050)
9979.442
32 x 42 (800 x 1050)
9979.443
24 x 47 (600 x 1200)
9979.444
28 x 47 (700 x 1200)
9979.445
32 x 47 (800 x 1200)
9979.446
Color:
RAL 9005
106
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Ventilation
Blanking panels
To place in unused or vacant space, to block off
airflow. Installs without the need for additional
hardware or tools.
U
Packs of
Item
Part No.
1
12
RAL 9005 tool-less (plastic)
9960.6761)
1
10
RAL 9005 tool-less (metal)
9970.016
3
5
RAL 9005 tool-less (metal)
9970.017
1
2
RAL 9005, 5 cutouts for quarter turn cable management accessories (metal)
9967.3632)
1
2
RAL 9005 (metal)
7151.005
2
2
RAL 9005 (metal)
7152.005
3
2
RAL 9005 (metal)
7153.0053)
6
2
RAL 9005 (metal)
7156.0053)
1
3
Aluminium, natural-anodized
1931.200
2
3
Aluminium, natural-anodized
1932.200
3
3
Aluminium, natural-anodized
1933.200
4
3
Aluminium, natural-anodized
1934.200
6
3
Aluminium, natural-anodized
1936.200
9
3
Aluminium, natural-anodized
1939.200
UL 94-VO
2)
Quarter turn cable management accessories not included, see page 98-100.
3)
Extended delivery times
1)
Make IT easy: Enclosure, power and cooling solutions
Metric measurements for are exact, imperial measurements are rounded
107
Technical details
TS IT network/server enclosure with viewing door – 24” (600 mm) wide
Front view
Side view
H2
H3
A
H1
A
Rear view
597
T1
Section A – A
597
Top view
=
512
=
T2
T1
T5
745
T4
T3
96
451
466
535
Part No.
U
5508.120
42
5508.220
42
5510.120
42
5510.220
42
108
Color
RAL 7035
Height inches (mm)
H1
H2
H3
T1
T2
T3
T4
T5
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
–
–
Depth dimensions inches (mm)
RAL 9005
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Technical details
TS IT network/server enclosure with viewing door – 32” (800 mm) wide
Front view
Side view
Rear view
1
H2
H3
A
H1
A
797
T1
Section A – A
797
1 For height 1200 mm
Top view
712
=
with one-piece door
=
96
1
Top view depth 600 mm
T6
T1
T2
T4
T5
T3
650
451
466
735
Part No.
U
5503.120
24
5503.220
24
5504.120
24
5504.220
24
5505.120
38
5505.220
38
5506.120
42
5506.220
42
5507.120
42
5507.220
42
5509.120
42
5509.220
42
5511.120
42
5511.220
42
5512.120
47
5512.220
47
Color
RAL 7035
Height dimensions inches (mm)
Depth dimensions inches (mm)
RAL 9005
H1
H2
H3
T1
T2
T3
T4
T5
T6
–
47.19 (1198.5)
43.78 (1112)
38.35 (974)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
47.19 (1198.5)
43.78 (1112)
38.35 (974)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
–
47.19 (1198.5)
43.78 (1112)
38.35 (974)
40.32 (1024)
35.91 (912)
36.81 (935)
29.33 (745)
3.43 (87)
33.47 (850)
47.19 (1198.5)
43.78 (1112)
38.35 (974)
40.32 (1024)
35.91 (912)
36.81 (935)
29.33 (745)
3.43 (87)
33.47 (850)
–
70.81 (1798.5)
67.40 (1712)
61.97 (1574)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
70.81 (1798.5)
67.40 (1712)
61.97 (1574)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
24.57 (624)
20.16 (512)
21.06 (535)
17.52 (445)
3.43 (87)
25.59 (650)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
24.57 (624)
20.16 (512)
21.06 (535)
17.52 (445)
3.43 (87)
25.59 (650)
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
29.33 (745)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
29.33 (745)
3.43 (87)
33.47 (850)
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
29.33 (745)
3.43 (87)
41.34 (1050)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
29.33 (745)
3.43 (87)
41.34 (1050)
–
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
32.44 (824)
28.03 (712)
28.94 (735)
21.46 (545)
5.79 (147)
25.59 (650)
–
–
–
–
–
–
–
–
Make IT easy: Rack & data center solutions
Metric measurements for are exact, imperial measurements are rounded
109
Technical details
TS IT network/server enclosure with perforated door – 24” (600 mm) wide
Front view
Side view
H2
H3
A
H1
A
Rear view
T1
597
Section A – A
597
Top view
=
512
=
T2
T1
T5
745
T4
T3
96
453
468
535
Part No.
U
Color
RAL 7035
5508.110
42
5508.210
42
5510.110
42
5510.210
42
–
5521.210
42
–
5513.110
47
5513.210
47
5515.110
47
5515.210
47
5523.210
47
110
Height dimensions inches (mm)
Depth dimensions inches (mm)
RAL 9005
H1
H2
H3
T1
T2
T3
T4
T5
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
–
–
Metric measurements for are exact, imperial measurements are rounded
Make IT easy: Enclosure, power and cooling solutions
Technical details
TS IT network/server enclosure with perforated door – 32” (800 mm) wide
Front view
Side view
Rear view
1
H2
H3
A
H1
A
797
797
T1
Section A – A
Top view
712
=
96
with one-piece door
T1
T5
745
T2
1
T4
T3
1 For height 1200 mm
=
453
468
735
Part No.
U
5504.110
24
5504.210
24
5509.110
42
5509.210
42
5511.110
42
5511.210
42
5522.210
42
5514.110
47
5514.210
47
5516.110
47
5516.210
47
5524.210
47
Color
RAL 7035
Height dimensions inches (mm)
Depth dimensions inches (mm)
RAL 9005
H1
H2
H3
T1
T2
T3
T4
T5
–
47.19 (1198.5)
43.78 (1112)
38.35 (974)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
47.19 (1198.5)
43.78 (1112)
38.35 (974)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
40.32 (1024)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
78.68 (1998.5)
75.28 (1912)
69.84 (1774)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
33.47 (850)
–
–
–
–
–
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
40.32 (1024)
35.91 (912)
36.81 (935)
3.43 (87)
33.47 (850)
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
86.56 (2198.5)
83.15 (2112)
77.72 (1974)
48.19 (1224)
43.78 (1112)
44.69 (1135)
5.79 (147)
41.34 (1050)
–
–
Make IT easy: Rack & data center solutions
Metric measurements for are exact, imperial measurements are rounded
111
Part number index
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
1919.500
25
3311.110
40
5501.010
79
5502.025
104
5513.110
13
1920.500
25
3311.135
40
5501.015
79
5502.105
101
5513.210
13
1926.500
25
3311.210
41
5501.020
79
5502.115
101
5514.110
13
1931.200
107
3311.235
40
5501.025
79
5502.120
102
5514.210
13
1932.200
107
3311.265
40
5501.030
79
5502.135
102
5515.110
13
1933.200
107
3311.310
44
5501.035
79
5502.145
101
5515.210
13
1934.200
107
3311.400
42
5501.040
79
5502.155
98
5516.110
13
1936.200
107
3311.535
41
5501.045
79
5502.205
100
5516.210
13
1939.200
107
3311.545
41
5501.050
79
5502.225
101
5521.210
12
2092.200
87
3311.565
41
5501.055
79
5502.235
97
5522.210
12
2092.300
87
3311.600
43
5501.060
79
5502.245
102
5523.210
13
2092.500
87
3636.010
90
5501.065
79
5502.255
102
5524.210
13
2094.200
87
4119.000
86
5501.070
79
5502.265
102
6148.000
72
2094.300
87
4127.010
94
5501.075
79
5502.305
90
7030.000
54
2094.400
87
4140.000
93
5501.095
79
5502.325
90
7030.010
54
2094.500
87
4140.810
93
5501.105
79
5502.405
99
7030.030
52, 53, 57
2203.400
98
4140.820
93
5501.200
82
5502.510
74
7030.040
53, 56
2243.605
23
4140.830
93
5501.210
82
5502.530
75
7030.050
53, 56
2246.605
23
4140.840
93
5501.300
78
5502.540
76
7030.060
58
2249.605
23
4157.000
86
5501.305
78
5502.550
76
7030.070
59
2252.605
23
4171.500
69, 85
5501.310
78
5502.560
77
7030.071
60
2253.605
24
4172.500
69, 85
5501.315
78
5502.570
77
7030.080
58
2255.605
23
4177.000
85
5501.320
78
5503.120
10
7030.090
59
2256.605
24
4178.000
85
5501.325
78
5503.220
10
7030.091
59
2258.605
23
4179.000
86
5501.350
78
5504.110
12
7030.092
59
2259.605
24
4180.000
86
5501.355
78
5504.120
10
7030.093
59
2261.605
23
4182.000
85
5501.400
92
5504.210
12
7030.094
59
2262.605
24
4183.000
85
5501.410
91
5504.220
10
7030.095
59
2265.605
24
4315.800
94
5501.420
91
5505.120
10
7030.100
56
2268.605
24
4315.830
94
5501.430
91
5505.220
10
7030.110
56
2271.605
24
4315.840
94
5501.440
91
5506.120
10
7030.111
56
2467.000
83
4315.850
94
5501.450
91
5506.220
10
7030.120
56
2468.000
83
4378.000
84
5501.460
91
5507.120
10
7030.130
56
2469.000
83
4380.000
84
5501.480
91
5507.220
10
7030.140
56
2486.300
88
4381.000
84
5501.615
89
5508.110
12
7030.150
56
2486.500
88
4382.000
84
5501.625
89
5508.120
11
7030.190
56
2487.000
88
4532.000
86
5501.655
89
5508.210
12
7030.200
56
2488.000
88
4582.500
81
5501.665
89
5508.220
11
7030.220
56
2489.000
88
4597.000
86
5501.675
90
5509.110
12
7030.230
56
2489.500
88
4612.000
72
5501.685
90
5509.120
11
7072.220
98
2504.000
88
5001.210
76, 77
5501.695
89
5509.210
12
7072.230
98
2504.500
88
5001.211
76, 77
5501.705
89
5509.220
11
7072.240
98
2504.800
88
5001.214
74, 75, 76
5501.715
90
5510.110
12
7094.100
88
2573.000
74, 75, 76, 77
5001.215
74, 75, 76
5501.725
90
5510.120
11
7094.110
88
2597.000
97
5001.218
74, 75, 77
5501.805
105
5510.210
12
7094.120
88
2817.000
70
5001.219
74, 75, 77
5501.815
105
5510.220
11
7111.000
99
3301.320
44
5001.222
75, 76, 77
5501.825
105
5511.110
12
7111.212
100
3301.370
44
5001.223
75, 76, 77
5501.835
105
5511.120
11
7111.214
100
3301.380
44
5001.239
74, 75, 76, 77
5501.895
105
5511.210
12
7111.222
100
3301.390
44
5001.240
74, 75, 76, 77
5502.010
104
5511.220
11
7111.224
100
3311.030
44
5501.000
79
5502.015
104
5512.120
11
7111.900
99
3311.040
44
5501.005
79
5502.020
104
5512.220
11
7112.000
99
112
Make IT easy: Enclosure, power and cooling solutions
Part number index
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
7113.000
95
7583.500
69
7990.103
64
8001.060
7151.005
107
7610.000
97
7990.104
64
8001.230
68
8612.410
87
68
8800.075
7152.005
107
7611.000
97
7990.201
64
78
8001.260
68
8800.210
7153.005
107
7641.000
26
7990.202
71
64
8001.280
68
8800.220
71
7156.005
107
7643.000
26
7200.210
59
7644.000
27
7990.203
64
8001.602
68
8800.290
71
7990.204
64
8001.622
68
8800.300
7200.214
59
7645.000
85
26
7990.205
64
8001.660
68
8800.320
7200.215
59
85
7706.135
21
7990.206
64
8001.662
68
8800.380
85
7200.216
7200.217
59
7709.135
21
7990.207
64
8001.680
68
8800.490
81
59
7709.535
20
7990.208
64
8001.682
68
8800.830
73
7200.450
59
7709.735
20
7990.209
64
8001.800
68
8802.060
75, 76, 77
7200.800
83
7712.135
21
7990.210
64
8001.802
68
8802.080
75, 76, 77
Part No.
7246.420
92
7715.135
21
7990.211
64
8001.822
68
9055.312
63
7257.005
100
7715.535
20
7990.213
65
8001.862
68
9055.412
63
7257.105
100
7715.735
20
7990.301
64
8001.880
68
9957.324
87
7320.435
58
7718.135
21
7990.302
64
8001.882
68
9960.301
17
7320.440
60
7721.135
21
7990.303
64
8100.235
79
9960.302
17
7320.441
60
7721.535
20
7990.304
64
8106.235
79
9960.303
17
7320.491
60
7721.735
20
7990.305
64
8108.235
79
9960.676
107
7320.530
56
7752.950
95
7990.306
64
8109.235
79
9961.453
32
7320.560
56
7825.360
74, 75, 76, 77
7990.307
64
8126.235
79
9961.504
72
7320.570
56
7825.361
74, 75, 76, 77
7990.308
64
8128.235
79
9961.779
100
7320.620
56
7825.366
74, 75, 76, 77
7990.309
64
8170.235
79
9961.780
100
7320.630
56
7825.367
74, 75, 76, 77
7990.310
64
8175.235
79
9963.487
16
7320.631
56
7825.380
74, 75, 76, 77
7990.311
64
8601.605
70
9963.488
16
7320.700
56
7825.381
74, 75, 76, 77
7990.313
65
8601.805
70
9963.490
17
7320.721
56
7825.386
74, 75, 76, 77
7995.969
47, 48
8601.905
70
9963.491
17
7320.730
62
7825.387
74, 75, 76, 77
7995.992
46
8602.015
70
9963.492
17
7320.810
61
7825.388
74, 75, 76, 77
7999.892
47
8602.025
70
9963.495
17
7320.812
61
7829.100
96
7999.893
47
8602.065
70
9963.498
17
7320.813
58
7829.110
96
7999.896
48
8602.085
70
9963.499
91
7320.814
59
7829.150
95
7999.897
48
8602.095
70
9963.601
83
7320.820
61
7829.200
95
7999.898
46
8602.605
70
9963.608
17
7320.830
60
7831.429
47
7999.970
47, 48
8602.805
70
9963.609
17
7320.950
56
7831.472
102
7999.977
48
8602.905
70
9963.670
34
7338.120
50
7857.366
30
7999.978
48
8611.020
82
9963.671
34
7338.220
50
7857.410
30
7999.979
48
8611.070
82
9963.672
34
7338.320
50
7857.420
30
7999.980
48
8611.180
83
9963.673
34
7391.000
19
7857.430
28
7999.981
48
8611.190
83
9963.674
34
7396.000
19
7857.431
28
7999.982
48
8611.200
83
9963.675
34
7400.000
19
7857.432
28
7999.983
48
8611.350
82
9963.678
34
7445.000
19
7857.435
29
7999.984
48
8611.360
82
9963.679
34
7495.000
72
7857.437
29
7999.985
48
8612.000
84
9963.680
34
7541.000
96
7857.440
29
7999.986
48
8612.020
84
9963.681
34
7542.000
96
7980.000
104
7999.987
48
8612.060
84
9963.700
14
7543.000
96
7980.100
104
7999.988
48
8612.080
84
9963.701
14
7544.000
96
7980.110
104
7999.989
48
8612.090
84
9963.714
14
7545.000
96
7980.148
104
7999.990
48
8612.100
84
9963.715
14
7546.000
96
7990.012
65
7999.999
46
8612.120
84
9963.728
14
7547.000
96
7990.014
65
8000.100
69
8612.160
84
9963.729
14
7548.000
96
7990.101
64
8000.500
69
8612.180
84
9963.750
14
7549.000
96
7990.102
64
8001.030
68
8612.400
86
9963.751
14
Make IT easy: Enclosure, power and cooling solutions
113
Part number index
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
Part No.
Page
9963.752
14
9969.881
9963.753
14
9969.882
17
9970.811
39
9978.377
80
9978.470
37
17
9970.812
39
9978.378
80
9978.471
9963.762
14
37
9969.883
17
9970.813
39
9978.379
80
9978.472
9963.763
37
14
9969.884
16
9970.814
39
9978.380
80
9978.473
38
9963.770
15
9969.885
16
9970.815
39
9978.381
80
9978.474
38
9963.771
15
9969.886
16
9970.816
39
9978.382
80
9978.475
38
9963.772
15
9969.887
16
9970.843
33
9978.383
80
9978.476
38
9963.800
39
9969.892
17
9970.844
33
9978.384
80
9978.477
38
9967.363
107
9969.893
17
9970.845
33
9978.415
71
9978.478
38
9967.490
70
9969.894
17
9970.846
33
9978.416
28
9978.479
38
9967.491
70
9969.895
17
9970.847
33
9978.417
28
9978.480
38
9967.492
70
9969.896
17
9970.848
33
9978.418
28
9978.481
38
9967.493
70
9969.897
17
9970.986
92
9978.440
33
9978.482
38
9967.494
70
9969.898
17
9970.989
71
9978.441
33
9978.483
38
9967.495
70
9969.899
17
9971.041
80
9978.442
34
9978.486
38
9967.527
45
9969.916
79
9971.042
80
9978.443
34
9978.487
38
9967.529
45
9969.917
79
9971.043
80
9978.444
34
9978.488
38
9967.972
18
9969.920
79
9971.044
80
9978.445
35
9978.489
38
9967.973
18
9969.936
105
9971.045
80
9978.446
35
9978.490
38
9967.974
18
9969.937
105
9971.046
80
9978.447
35
9978.497
106
9968.593
79
9969.938
105
9971.047
80
9978.448
35
9978.499
106
9968.594
79
9969.939
105
9971.048
80
9978.449
35
9978.500
106
9968.595
79
9969.948
79
9971.056
31
9978.450
35
9978.501
106
9968.596
79
9969.949
79
9971.057
31
9978.451
35
9978.502
106
9968.597
79
9969.955
79
9971.058
32
9978.452
35
9978.503
106
9968.751
73
9969.956
79
9971.104
35
9978.453
35
9978.504
106
9969.309
79
9969.957
79
9971.105
35
9978.454
36
9978.505
106
9969.311
79
9969.958
79
9971.106
36
9978.455
35
9978.506
56
9969.312
79
9970.016
107
9971.107
36
9978.456
36
9978.507
56
9969.351
79
9970.017
107
9971.110
36
9978.457
35
9978.508
56
9969.352
79
9970.139
56
9971.111
36
9978.458
36
9978.509
56
9969.355
79
9970.164
45
9971.112
35
9978.459
35
9978.521
56
9969.580
22
9970.165
45
9971.113
36
9978.460
36
9979.441
106
9969.581
22
9970.194
94
9971.115
62
9978.461
36
9979.442
106
9969.582
22
9970.771
38
9971.173
44
9978.462
36
9979.443
106
9969.597
97
9970.772
38
9971.174
44
9978.463
36
9979.444
106
9969.599
98
9970.773
37
9971.175
44
9978.464
36
9979.445
106
9969.600
99
9970.774
37
9978.360
103
9978.465
37
9979.446
106
9969.736
97
9970.775
38
9978.361
103
9978.466
37
9979.454
106
9969.876
16
9970.776
38
9978.362
70
9978.467
37
9979.457
29
9969.877
16
9970.777
37
9978.363
70
9978.468
37
9979.458
29
9969.880
17
9970.778
37
9978.364
70
9978.469
37
RAL colors
RAL Color
Designation
5018
turquoise blue
7015
slate grey
7035
light grey
9005
jet black
Color samples shown are for reference only and may be different from the finished product
114
Color Sample
Make IT easy: Enclosure, power and cooling solutions
Enclosures
Power Distribution
Climate Control
IT Infrastructure
Software & Services
Rittal Corporation
1 Rittal Place • Urbana Ohio 43078 • USA
Woodfield Corporate Center • 425 North Martingale Road, Suite 400 • Schaumburg Illinois 60173 • USA
Phone: 937-399-0500 • Fax: 800-477-4003 • Toll-free: 800-477-4000
Email: [email protected] • Online: www.rittal.us
Rittal Systems Ltd.
6485 Ordan Drive • Mississauga Ontario L5T 1X2 • Canada
Phone: 905-795-0777 • Fax: 905-795-9548 • Toll-free: 800-399-0748
Email: [email protected] • Online: www.rittal.ca
12/12 • US255
The Rittal Corporation is the U.S. subsidiary of Rittal GmbH & Co. KG and manufactures the world’s leading industrial and
IT enclosures, racks and accessories, including climate control and power management systems for industrial, data center,
outdoor and hybrid applications. For more information about Rittal and its products, please visit www.rittal.us or
call 1-800-477-4000.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement