Lenco SCD 30 stereo radio CD player Instruction manual

Below you will find brief information for stereo radio CD player SCD 30. The SCD 30 is a versatile device that can play music from CDs, MP3s, and USB drives. It also features a radio tuner for listening to your favorite stations. You can enjoy your music through the built-in speakers or connect headphones for private listening. The SCD 30 is a compact and portable unit, making it ideal for taking with you on the go.

PDF Download

Document

SCD-30
STEREO RADIO MP3/WMA/USB/SD/CD PLAYER
INSTRUCTION MANUAL
CONTROLS
REMOTE CONTROL UNIT
MENU BUTTON
STEREO / MONO BUTTON
BBS BUTTON
PROGRAM / MEMORY BUTTON
RANDOM / P - BUTTON
STOP BUTTON
TUNE - BACK BUTTON
MUTE BUTTON
VOLUME - BUTTON
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
MENU BUTTON
FUNCTION BUTTON
ON/ STANDBY BUTTON
USB PORT
SD PORT
VOLUME CONTROL +
VOLUME CONTROL BAND / FOLDER BUTTON
CD DISPLAY
REMOTE SENSOR INDICATOR
CARRYING HANDLE
ENTER / PLAY/PAUSE BUTTON
RANDOM / P - BUTTON
PLAY MODE/P+ BUTTON
SPEAKER
TUNE + / NEXT BUTTON
STOP BUTTON
TUNE - / BACK BUTTON
STEREO/MONO BUTTON
PROGRAM/MEMORY BUTTON
TELESCOPIC ANTENNA
OPEN / CLOSE CD AREA
CD DOOR PHONES JACK
BATTERY COMPARTMENT AC SOCKET
ON/ STANDBY BUTTON
FUNCTION BUTTON
BAND / FOLDER BUTTON
INTRO BUTTON
PLAY MODE / P + BUTTON
ENTER /
PLAY/PAUSE BUTTON
TUNE + NEXT BUTTON
PRESET EQ BUTTON
VOLUME + BUTTON
WARNING
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
CLASS 1 LASER PRODUCT
APPAREIL &Aacute; LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low power laser device.
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRE !
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on a carpet.
ON SAFETY
• When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage it and create hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.
ON AC VOLTAGE
• Before use, check that the rated voltage of your unit matches your local voltage.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the CD player.
• When there is condensation inside the unit, the unit may not function normally.
• Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.
* Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
* Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc..
* Do not place naked flame sources, such as lighted candles on the apparatus.
* Take attention to the environmental aspects of battery disposal.
* Use the apparatus only in moderate climates (not in tropical climates).
* Do not expose the apparatus to dripping or splashing.
* Do not place objects filled with liquids, such as vases, on the apparatus.
• Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during
intended use. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall
be disconnected from the mains socket outlet completely.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightening flash
with arrowhead symbol
within the triangle is a
warning sign alerting
the user of &quot;dangerous
voltage&quot; inside the unit.
ATTENTION : To reduce the risk
of electric shock, do not remove the
cover. There are no user serviceable
parts inside the unit. Refer all servicing
to qualified personnel.
The exclamation point within
the triangle is a warning sign
alerting the user of important
instructions accompanying
the product.
In case of misfunction due to electrostatic discharge the apparatus has to be reset by disconnecting it from mains supply.
THE MARKING PLATE IS LOCATED AT THE BOTTOM OF ENCLOSURE OF THE APPARATUS.
POWER SUPPLY
USING HOUSE CURRENT
Before use, check that the rated voltage
of your unit matches your local voltage.
To AC socket
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
To AC outlet
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
battery door
Insert 8 UM-2 ( size C ) batteries.
FOR BETTER RECEPTION
FM
AM
TURN on / OFF THE SYSTEM Press the ON/ STANDBY button to turn the audio on. To change the audio mode between,
CD , U DISK and TUNER press FUNTION button while the power is on. the audio
mode is displayed.
Power will be cut off automatically when CD, MP3 and USB function in stop mode for 15 minutes.
ADJUSTING THE SOUND
VOLUME
Press volume +/- to adjust volume level.
VOLUME
FOR PRIVATE LISTENING
Plug in headphones (&oslash;3.5 mm stereo mini-plug) to the PHONES jack.
When headphones are plugged in, the speakers are automatically disconnected.
TUNER OPERATION
Tuning a RADIO Station
1. Press FUNCTION button repeatedly
until “TUNER” is shown.
Selecting FM Stereo/Mono mode
1. To select FM stereo/mono mode, press ST/MONO
button on the remote control.
2. Press the BAND/FOLDER button
to select the desired frequency band (FM or AM).
3.
Press the TUNE + /NEXT or
TUNE - /BACK button as many times
as required to tune in to the
desired station.
4.
Press and hold the TUNE +/NEXT or
TUNE - /BACK button for more than 1 second,
scanning starts automatically and tuner stops at the
first receivable broadcast station.
5. To stop the auto tuning, press the TUNE +/NEXT or
TUNE - /BACK button again.
2. “STEREO” icon will be lit on when receiving station is broadcasted in Stereo.
3. To select mono mode, press ST.MONO button again. 4. “STEREO” icon will never turn on in FM MONO mode.
GB 1
Radio memory function 1.
2.
3.
4.
5.
6.
7.
Tune to a desired radio station.
Press PROGRAM/MEMORY Key to enter tuning saving mode. The “MEMORY” icon will be turned on.
Program number “01” on the left hand side will be flashing.
Within 10 seconds, press P+ or P- button to select the desired program number.
Press Program Key to contiron the memory.
If there is no key pressed within 10 seconds, it will exit tuning save
mode and the “MEMORY” icon will be turned off.
Repeat steps 2 to 5 to set other stations, or change a preset station.
COMPACT DISC PLAYBACK
1.
Press FUNCTION button repeatedly
until “CD” is shown on display.
3.
Insert a disc with the label
side facing up.
2.
Lift the CD door up.
5.
After disc read finished, the disc will play
automatically.
In stop mode, press the Enter/Play/Pause button to play the track. CD display
For CD : Track number &quot;001&quot; &amp; &quot;CD&quot; &amp; &quot;00:00&quot; will be
shown,during normal compact disc playback.
For MP3 : Track number &quot;F01&quot; &amp; &quot;MP3&quot; &amp; &quot;00:00&quot; will be
shown, during MP3 playback.
For WMA : Track number &quot;F01&quot; &amp; &quot;WMA&quot; &amp; &quot;00:00&quot; will
be shown, during WMA playback.
For USB : Track number &quot;F01&quot; &amp; &quot;USB&quot; &amp; &quot;00:00&quot; will
be shown, during USB playback.
4. Close the CD door, the disc will rotate.
For CD :
The total tracks of the disc will show on the display.
For MP3/WMA/USB :
The total tracks of the disc and total number of the folder
will show on the display.
TO INTERRUPT PLAYBACK
Press the Enter/Play/Pause button. Press the button
to resume playback.
CD display
For CD : Track number &quot;001&quot; &amp; &quot;CD&quot; will be shown, the
time of the track &quot;00:00&quot; in flash, during normal compact
disc playback.
For MP3 : Track number &quot;F01&quot; &amp; &quot;MP3&quot; will be shown,
the time of the track &quot;001&quot; in flash, during MP3 playback.
For WMA : Track number &quot;F01&quot; &amp; &quot;WMA&quot; will be shown,
the time of the track &quot;001&quot; in flash, during WMA playback.
For USB : Track number &quot;F01&quot; &amp; &quot;USB&quot; will be shown,
the time of the track &quot;001&quot; in flash, during USB playback.
MP3 display
WMA display
USB display
CD display
TO STOP PLAYBACK
Press the STOP button.
For CD : Total number of tracks and time will be shown.
For MP3 : Total number of tracks and folder will be shown.
For WMA : Total number of tracks and folder will be shown.
For USB : Total number of tracks and folder will be shown.
MP3 display
WMA display
USB display
GB 2
TO SKIP TO THE BEGINNING OF A TRACK
•
Press either one of the skip buttons according to the desired skip direction.
•
Play/back resumes from the selected track.
•
When the button is pressed once during play, the previous track starts again.
•
When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
•
Keep the or button pressed during playback, and release the button as soon as you
recognise the desired passage. Then normal CD playback will resume from this point.
1.
PLAYING TRACKS IN RANDOM ORDERS
If the RANDOM/P- button is pressed, the tracks on the discs are
not played in consecutive order but in random order.
The word RAND appears on the display to provide a visual
reminder that the RANDOM function has been activated. .
2. Press the STOP button or
RANDOM button to switch
off the function RANDOM.
REPEAT , REPEAT ALL , REPEAT AB AND REPEAT FOLDER PLAYBACK
Press PLAY MODE/P+ button during stop mode.
For CD: Total number of tracks &amp; time will be shown.
For MP3/WMA/USB: Total number of tracks &amp; folder will be shown.
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT &gt;&gt; REPEAT ALL &gt;&gt; CLEAR.
During Repeat 1 mode,
display shows
FOR MP3 / WMA / USB PLAYBACK
Mode sequence REPEAT &gt;&gt; REPEAT ALL &gt;&gt; FOLDER
&gt;&gt; CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
CD display
During Repeat 3 mode,
display shows
Press PLAY MODE/P+ button during playback.
For CD: The folder tracks number &amp;
time will be shown.
For MP3/WMA/USB: The folder tracks number
&amp; folder will be shown.
During Repeat 4 mode,
display shows
MP3/WMA/USB display
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT &gt;&gt; A REPEAT &gt;&gt;
A-B REPEAT &gt;&gt; REPEAT ALL &gt;&gt; CLEAR.
FOR MP3 / WMA / USB PLAYBACK
Mode sequence REPEAT &gt;&gt; A REPEAT &gt;&gt;
A-B REPEAT &gt;&gt; REPEAT ALL &gt;&gt; FOLDER &gt;&gt; CLEAR.
During Repeat 1 mode,
display shows
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 2 mode,
display shows
During Repeat 3 mode,
display shows
During Repeat 3 mode,
display shows
During Repeat 4 mode,
display shows
During Repeat 4 mode,
display shows
During Repeat 5 mode,
display shows
CD display
During Repeat 5 mode,
display shows
GB 3
During Repeat 6 mode,
display shows
MP3/WMA/USB display
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW, playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance, writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
PROGRAMMED CD OPERATION
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.
1.
2.
3.
4.
5.
6.
7.
8.
Program mode works in STOP mode only.
Holding “PROGRAM/MEMORY” button. The “PROG” icon will be turned on. “000 P01” will be shown with “000”
flashing. “000” represents track number and “P01” represents program location number.
Press TUNE +/NEXT or TUNE - /BACK to select the required track number.
Press PROGRAM/MEMORY button to confirm the track number. The display will show the next
program number “000 P02:”. The track number will be flashing again and waiting for track number input.
Repeat steps 3 and 4 until all the desired tracks has been programmed or all the
program memories have been used. It will loop back to P01 after all the program
memories have been used. Same track number can be programmed more than once.
CD display
Press ENTER/PLAY/PAUSE button to playback.
To clear the programmed tracks, first press PROGRAM/MEMORY button
for 2 seconds to enter program mode.
Press STOP key to clear all the programmed memories.
FOR MP3/WMA/USB PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.
1.
2.
3. 4.
5.
6.
7.
8.
9.
Program mode works in STOP mode only.
Press “PROGRAM/MEMORY” button for 2 seconds to enter program mode. The “PROG” icon will be turned on.
“00000 P01” will be shown with “00” flashing. “000” represents track number and “P:01” represents program location number.
Press the TUNE +/NEXT or TUNE - /BACK button to select the desired folder.
Press TUNE +/NEXT or TUNE - /BACK to select the required track number.
Press PROGRAM/MEMORY button to confirm the track number. The display will show the next
program number “000 P02”. The track number will be flashing again and waiting for track number input.
Repeat steps 3 and 4 until all the desired tracks has been programmed or all the
program memories have been used. It will loop back to P01 after all the program
memories have been used. Same track number can be programmed more than once.
MP3/WMA/USB display
Press ENTER/PLAY/PAUSE button to playback.
To clear the programmed tracks, first press PROGRAM/MEMORY button
for 2 seconds to enter program mode.
Press STOP key to clear all the programmed memories.
1. 2. 3. 4. USB OPERATION
Connect USB into the USB input of the system.
Press “FUNCTION” button repeatedly until “UDISK” is shown on the display. After entered the corresponding mode, the corresponding icon will be lit up.
The unit will start to read the media and to start the playback automatically.
ID3 function can be enable/disable in the “MENU” function.
USB connector does not support connection with USB extension cable and it is not designed for communication
with computer directly.
GB 4
PROGRAMMED USB OPERATION
Program mode works in Stop mode
1. Press PROGRAM/MEMORY button. Then, the “00000P:01” will be shown on the display and the first 2 digits will
be flashing.
2. Press “TUNE +/NEXT or TUNE - /BACK” to select the desired folder. After press “PROG” button to confirm the folder,
the 3rd to 5th digits will be flashing.
3. Press “TUNE +/NEXT or TUNE - /BACK” to select the desired track. Then, press “PROG” button to confirm the track number.
4. Press “PROGRAM/MEMORY” button again to confirm the setting. The display will show next program number.
5. Repeat the sequence as indicated in 2 to 4 for next program.
6. After all the desired programs have been selected, Press “PLAY/PAUSE” button for playback.
USB display
Mute On/Off
MUTE
1.
2.
3.
4.
5.
1.
2.
1.
2. 3. 4.
The mute on/ off is changed cyclically by pushing MUTE button.
The “mute” mark is on during mute is on.
The mute on is cancelled in case as shown below.
a. The power is off/on
b. The Volume is adjusted by the VOL +/- button.
PRESET EQ Press MENU button until EQ shown on the display.
Press ENTER to enter EQ setting mode.
Press MENU button to select of the EQ effect will be :
- FLAT -&gt; ROCK -&gt; JAZZ -&gt; CLASSIC -&gt; POP -&gt; FLAT.
Press ENTER button to confirm the setting.
Press STOP button to clear the EQ setting mode.
FOLDER SELECTION
In STOP mode, press BAND/FOLDER button will skip to the next folder.
This operation valid for all media of MP3,WMA and USB operation.
ID3 Display
Press MENU button repeatedly unit ID3 shown on the display.
Press ENTER to enter ID3 setting mode.
Press MENU to select &quot; ID3 ON &quot; or &quot; ID3 OFF &quot;.
Press enter to confirm.
INTRO
In CD mode, press to play only the first 10 seconds of each track
on the disc.
1.
2. 3. 4.
BBS
Press MENU button repeatedly unit BASS shown on the display.
Press ENTER to enter Bass Boost setting mode.
Press ENTER to select &quot; BASS ON &quot; or &quot; BASS OFF &quot;.
Press enter to confirm.
The bass boost on / off is changed cyclically by pushing
BBS button on remote control.
GB 5
MAINTENANCE
CLEANING CD
If the CD skips or will not play , the disc may need cleaning .
Before playing, wipe the disc from the centre out with a cleaning
cloth. After playing, store the disc in its case.
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow several
times on the lens and remove the dust with the brush. Finger prints
may be removed with a cotton swab moistened with alcohol.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping
with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem
occurs, disconnect the AC power cord and remove the batteries.
Wait at least 5 seconds, then reconnect the AC power cord or
reinstall the batteries.
WARNING
Should the CD door be opened before the reading of the CD
completed, a jamming noise may occur. This is resolved by
closing the CD door.
SPECIFICATIONS
CD SECTION
Channels:
2 channels
S / N ratio:
60 dB
Wow &amp; Flutter: undetectable
Sampling frequency:
44.1 kHz 8 x over sampling
Quantization:
1 bit DA converter
Pick up light source: Semi - conductor laser
Pick up wave length
790 nm
RADIO SECTION
Tuning ranges :
FM 87.5 - 108 MHz
AM 522 - 1620 kHz
Antennas :
AM Built - in ferrite bar
FM telescopic antenna
GENERAL
Output power:
1.2 W + 1.2 W (RMS)
Power consumption:
14 W
Speaker: 3&quot; 8 OHM
Phones jack:
3.5MM
Power source: AC: 230V / 50Hz
(INDICATED ON THE REAR OF THE UNIT)
DC: 12V 1.5 x 8 UM2 / R14 / &quot;C&quot; SIZE
Dimensions:
350 (L) x 260 (D) x 134 (H) mm
Weight
1.95 KGS
Due to continuing improvement, the features and the design are subject to change without notice.
Where to place the item :
Today’s furniture is coated with a wide variety of lacquers and synthetic-coatings that are treated with an extensive range
of cleaning products. Therefore, the possibility that some of these substances contain components that react adversely to
the rubber feet of the item and soften them, cannot be completely excluded. The rubber feet of the appliance can cause
discoloring to furniture surfaces. If necessary, place the appliance on a non-slide surface. If at any time in the future you should need to dispose of this product please note that: Waste electrical products
should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)
GB 6
">

Hello! I am an AI chatbot specifically trained to assist you with the Lenco SCD 30 stereo radio CD player Instruction manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key Features

Plays CDs, MP3s, and USB drives
Radio tuner
Built-in speakers
Headphone jack
Programmable playback
Random playback
Repeat playback mode
Preset EQ
Bass Boost
ID3 tag display

Frequently asked questions

How do I play a CD on the SCD 30?

Insert the CD into the CD player with the label side facing up. Close the CD door, and the disc will start playing automatically. You can also press the Enter/Play/Pause button to start playback.

Can I listen to the radio with the SCD 30?

Yes! To listen to the radio, press the Function button repeatedly until "Tuner" is displayed. Select the desired frequency band (FM or AM) using the Band/Folder button. You can then use the Tune +/- buttons to tune in to your favorite station.

How do I connect a USB drive to the SCD 30?

Connect the USB drive to the USB port. Press the Function button until "UDISK" is shown on the display. The device will automatically start reading the files on the USB drive and begin playback.