Owner’s Manual TSD-DA13 1x3 Distribution Amplifier TSD-DA13 1x3 Distribution Amplifier –1– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Description The Atlas Sound TSD-DA13 1x3 distribution amplifier is designed to provide clean, isolated signal distribution locally or to remote locations. The unit allows a balanced mic or line level source to be distributed to three isolated variable outputs making it a perfect solution for applications including convention centers, houses of worship, restaurants/sports bars and industrial facilities. A high quality, low noise mic pre-amp, defeatable 12dB low cut filter @ 125Hz and dual summing RCA line level inputs are included as part of the unit’s input section. These features combined with the 3 mic / line level outputs allow for multiple configuration. Isolation between outputs prevents crosstalk, removes miss matched input impedance concerns and allows for adjustable levels on each connected device. All I/O (except the summing RCA inputs) is via Phoenix style connectors for installation convenience. The TSD-DA13 is highly efficient and meets Energy Star™ standards as one 24V DC power supply (available separately) can power multiple Atlas Time Saving Devices. The TSD-DA13 is part of a full line of Atlas Sound Time Saving Devices. These compact (1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in the easiest and in the most efficient and cost-effective way. All models are made from high quality components and include removable individual I/O connectors for quick and precise wiring, separate ground terminals for all I/Os assuring secured connections, and removable level controls that can be replaced with tamper-proof security covers. Features Audio Applications One (1) • Balanced Mic/Line Input with Switchable 24V Phantom Power • High Gain (50dB), Low Noise Mic Preamp • Summed Dual RCA Input • Three (3) Isolated Balanced Mic/Line Outputs • 12dB/Octave Low Cut Filter @ 125Hz • Input Peak & Signal Indicator LEDs • High Gain Output for Driving Long Balanced Lines • Separate Ground Connections • Removable Phoenix Style I/O Connectors • Meets Energy Star™ Standards • Compact Chassis Design • • • • • Mic Preamp Line Preamp Stereo Summing Preamp Line Drive Zone Divider Installation • • • • • Churches Restaurants Sports Bars Schools Industrial Facilities –2– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Front Panel Description 6 6 4 5 3 6 6 1 2 1. Input Level Control - Adjusts the gain of the source audio signal that is applied to the DA13 circuitry. Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control knob can be removed and replaced with a supplied security cover to prevent unauthorized adjustment. 2. Output Level Controls - Adjust the level of each of the three outputs using these controls. Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The output level control knobs can be removed and replaced with supplied security covers to prevent unauthorized adjustment. 3. Power LED - Illuminates BLUE when 24VDC power is present. 4. Input Peak LED - Illuminates Red when the input signal reaches 3dBV below when signal clipping will occur. Occasional flashing is normal but if this indicator is continuously On, then reduce the input level using the input level control on the front panel. 5. Signal LED - Illuminates Green when the input signal strength reaches 25mV to verify a signal path. 6. Bracket Retainer Points - Each TSD includes two mounting brackets for securing the TSD to a cabinet or wall. Remove screws and align the bracket with the panel hole before firmly tightening the screws. –3– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Rear Panel Description 5 5 4 5 5 1 2 3 TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm pitch between pins. 1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for an external 24VDC power supply (sold separately). Because of the TSD’s low power consumption, a single external power supply may power more than one TSD. Please refer to the specifications on current requirements in milliamps to match with the appropriate power supply. Note: It is acceptable to exceed the current requirements of the TSDs but NOT safe to use a power supply that is below the current requirement of the device. 2. Mic/Line Input - Balanced Line level or balanced mic level signals are connected to this input. Your source connects to a balanced line or mic level source. Your connection must be mated properly to the input connector or signal loss and/or noise may occur. For gain or source input type selection, refer to the “Dip Switch Function Identification” chart for proper input setting. Note: Unbalanced line level inputs can be inserted with proper wire configuration by connecting the (G) and (-) terminals together. 3. Mic/Line Output - Balanced Line level signals provide output when an input signal is present for connection to balanced mic or line level devices. Your output connections must be connected properly to the connectors or loss and/or noise may be introduced into the signal. Note: Unbalanced line level devices can be used with proper wire configuration by connecting the (G) and (-) terminals together. 4. RCA Input - Unbalanced audio signals applied to these female RCA connectors are electronically summed and fed to the three outputs. It is NOT recommended to use the unbalanced RCA inputs and the balanced input at the same time. 5. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing the included cable management retainers. Remove one of the rear panel screws, align the panel hole with a retainer and firmly tighten the screws. –4– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Dip Switch Function Identification SWITCH FUNCTIONS Switch Position • # 1 - 24VDC DIPPhantom Power applies power to the input terminal for condenser mic SW operation. Down position is On. • DIP SW # 2 - Input Mic or Line Select for input gain selection. Up position is Line, down position is Microphone. • DIP SW # 3 - Input Low Cut Filter engages at a roll off rate of 12dB per octave. This filter operates either in the Line or Mic mode. Ideal for vocal microphones to reduce low frequency energy and to increase intelligibility. Down position is On. • DIP SW # 4,5,6 - Microphone or Line signal level selection for each output . Up position is Line, down position is Microphone. Knob and Security Cover All front panel level controls feature a removable knob that can be replaced with an included security cover. Follow these steps to prevent potentiometer damage or unwanted changes. 1. Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto the potentiometer shaft. Do not force or damage may occur to the potentiometer. 2. Security Cover Installation – Remove the knob from the panel and insert the cover. Do not force or damage may occur to the potentiometer. Small pliers may be required to remove the knobs. Mounting There are three ways to securely mount this TSD: 1.Velcro™ - Each unit includes industrial grade Velcro™ with adhesive backing to adhere to any flat surface. 2. Brackets - Each unit includes two mounting brackets to secure to a cabinet or wall. 3. Rack Mount Panel - The optional TSD-RMK rack mount panel supports up to four TSDs in a 1RU space. –5– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Block Diagram DIP SWITCH FUNCTION SET MIC/LINE 1 2 3 PHANTOM INPUT 125Hz/12dB LOW CUT OFF LINE OFF LINE LINE LINE ON MIC ON MIC MIC MIC 4 5 6 + – OUTPUT 1 G OUTPUT 1 OUTPUT 2 OUTPUT 3 1 MIC/LINE 2 3 4 5 6 OUTPUT 1 LEVEL ON FRONT PANEL LOW CUT 125Hz -3db MIC/LINE INPUT LEVEL ON FRONT PANEL SIGNAL + – OUTPUT 2 G OUTPUT 2 LEVEL ON FRONT PANEL PEAK R MIC/LINE RCA + – OUTPUT 3 G L OUTPUT 3 LEVEL ON FRONT PANEL 24V DC 24V POWER SHOW LED Specifications Description 1 x 3 Mic/Line Distribution Amplifier Chassis Color Chassis Material Black Aluminum Inputs Type Qty 1, Unbalanced Connection RCA Left and Right Actively Summed Impedance10KΩ Input Level 316mV (-10dBV) = 2V (+6dBV) Balanced Output, Maximum Input 6V (15dBV) Type Qty 1, Balanced Mic or Line Selectable Connection Removable 3 Position Captive Screw 3.5mm Spacing Impedance1.2KΩ Balanced, 600Ω Unbalanced Phantom 24VDC Defeatable Low Cut Filter 125Hz/12dB Defeatable Line Input Level 1V (0dBV) Balanced = 2V (+6dBV) Balanced Output, Maximum Input 6V (15dBV) –6– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Mic Input Level 46dB Gain 10mV (-40dBV) Balanced = 2V (+6dBV) Balanced Output, Maximum Input 40mV (-27dBV) Outputs Type Qty 3, Balanced Mic or Line Selectable Connection Removable 3 Position Captive Screw 3.5mm Spacing Impedance300Ω Balanced, 150Ω Unbalanced Line Output Level 1V (0dBV) In = 2V (+6dBV) Balanced, Maximum Output 6V (15dBV) Mic Input vs Output Level 10mV (-40dBV) In = 80mV (-21dBV), Maximum Output 300mV(-10dBV) Controls Input Level Control Output Level Control Dip Switch Function Qty 1, Removable Knob with Security Cover Qty 3, Removable Knobs with Security Covers • Phantom Power 24VDC • Input Mic/Line Select • Input 125Hz/12dB High Pass Filter • Output Qty 3, Mic/Line Select Indicators Output Signal Green, 25mV On Threshold Output Peak Red, -3dB Before Clip PowerBlue Electrical Frequency Response THD Signal to Noise 20Hz - 20kHz (±1dB) .06% & 1kHz Line to Line: 85dBV Mic to Line: 78dBV Line to Mic: 55dBV Mic to Mic: 55dBV Mounting Velcro™ Brackets TSD-RMK Cable Retainer Industrial Grade, Included Qty 2, Included Optional 1 RU Rack Mount Panel (Supports 4 TSD Units) Qty 2, Included Power Requirements Voltage24VDC 60mA Power Consumption Power Consumption 1.4W Dimensions H 1.5" (39mm) x W 4" (101mm) x D 2.75" (70mm) Weight 6oz, .165kg Accessories TSD 24VDC Power Supplies TSD-RMK 1 RU Rack Panel Safety and Certifications External Power Supply cUL, CE, RoHS, TUV –7– Specifications are subject to change without notice. TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Limited Warranty All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for a period of three years on all Atlas Sound products, including SOUNDOLIER brand, and ATLAS SOUND brand products except as follows: one year on electronics and control systems; one year on replacement parts; and one year on Musician Series stands and related accessories. Additionally, fuses and lamps carry no warranty. Atlas Sound will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed in other than a workman like manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to Atlas Sound do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any nonwarranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges collect. EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ATLAS SOUND SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Atlas Sound does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state. –8– Specifications are subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project