Hewlett Packard Enterprise AF065A rack accessory Datasheet

QuickSpecs

QuickSpecs

HP Rack Accessories

HP offers a wide variety of rack accessories that help you to configure HP Racks. For more information go to http://www.hp.com/products/racks or http://www.hp.com/products/rackoptions

HP Rack Cable Trays

Rack Top Cable Tray, 600W

Rack Top Cable Tray, 800W

Rack to Rack Adjustable Cable Tray, Aisle Transfer Bridge

NOTE: The Aisle Transfer bridge allows for cabling trays to be connected even across different aisles in the datacenter.

NOTE: These kits mount on the top of the 9000 and 10000 Series rack (except the S10614 rack). Kit color is graphite.

383982-B21

383983-B21

383984-B21

Rear Extension Kits

10636 G2 Rear Extension Kit (155mm)

NOTE: Compatible with 10000 and 10000 G2 Series racks. Extends the rack 155mm for ideal cable management and adding Dual Rack Mounted PDU.

AF060A

HP Rack Light Kit

110V/220V Rack Light Kit

NOTE: Supports HP Rack 10000 Series and HP Rack 10000 G2 series. This neon light kit is mounted on the rack roof and used to provide light to the rear section of the rack.

Technical Specifications Rated Input

Max Rated Output

Power Consumption

100-240 VAC 50-60 Hz

9A / 240VAC

27W

361589-B21

AF076A

HP Rack Securing Kit

600W 10000 G2 Rack Tie Down

NOTE: For HP 10000 G2 Series only. The tie down kit is used to secure the rack to the datacenter floor.

NOTE: The Rack Tie Down Kit is not a Zone 4 tested product.

HP Locking Drawer

HP 2U Universal Locking Drawer (WW)

NOTE: This product mounts on HP 10000 Series and HP Rack 10000 G2 series racks with sliding rails and is used to store CD's, Instruction manuals, tools, and any other item that is frequently used at the rack. Drawer includes lock.

361591-B21

HP Airflow Optimization

HP 10000 Series Rack Airflow Optimization Kit

NOTE: The Airflow Optimization kit is designed to prevent hot and cold air from mixing thus optimizing the temperature at which the chilled air enters the racked servers.

NOTE: When configuring racks through Factory Express, a Rack Optimization kit will automatically ship with the rack. This kit is recommended for all other rack configurations also.

AF090A

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 1

QuickSpecs

HP Rack Accessories

QuickSpecs

Rack Cooling

10642 G2 Top Exhaust Extension Kit

NOTE: This Kit contains the top exhaust and the rear extension. Compatible with 10000 G2 Series 42U 600mm wide racks only. Field retrofit of an existing rack requires AF028A and AF029A.

10642 G2 Top Exhaust Field Retrofit Kit

NOTE: This field retrofit kit contains the rack to exhaust conversion parts (bottom & top panel, solid rear doors airflow opt. kit). Compatible with 10000 G2 Series 42U 600mm wide racks only. Field retrofit of an existing rack requires AF028A and AF029A.

10642 G2 Top Exhaust Rack

NOTE: This Kit a complete rack (AF002A) incl. AF029. This is not for direct sales, Factory CTO only. Factory CTO requires AF030A and AF028A - to get a complete Top Exhaust solution.

HP Roof Mounted Fan Kit 110V

HP Roof Mounted Fan Kit 220V

AF028A

AF029A

AF030A

257413-B21

257414-B21

Rack 5000 Series rack options

HP Front Door 5642 Rack ALL

Baying Kit for 5642 rack (Graphite Carbon)

NOTE: The baying kit is used to join two or more HP 5642 racks.

Stabilizer Kit for 5642 rack (Graphite Carbon)

NOTE: The stabilizing kit is recommended for single rack deployments. The 10KG2 22u racks AF021A and

AFO22A ships with Stabilization kit.

HP Front Door 5642 Rack ALL

Baying Kit for 5642 rack (Graphite Carbon)

NOTE: The baying kit is used to join two or more HP 5642 racks.

Stabilizer Kit for 5642 rack (Graphite Carbon)

NOTE: The stabilizing kit is recommended for single rack deployments.

376440-B21

374499-B21

374493-B21

376440-B21

374499-B21

374493-B21

Monitor/Utility Shelf

Monitor/Utility Shelf (Graphite)

100 Kg Sliding Shelf Kit

NOTE: The Monitor/Utility Shelf is a fixed shelf and can be mounted at any height to place a monitor or another component within the rack. It has a maximum weight capacity of 150 lb (68 kg) .

253449-B21

234672-B21

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 2

QuickSpecs

HP Rack Accessories

QuickSpecs

HP 1U Rackmount Keyboard with USB

1U Rackmount Keyboard with USB US

1U Rackmount Keyboard with USB UK

1U Rackmount Keyboard with USB GR

1U Rackmount Keyboard with USB FR

1U Rackmount Keyboard with USB IT

1U Rackmount Keyboard with USB SP

1U Rackmount Keyboard with USB DEN

1U Rackmount Keyboard with USB NOR

1U Rackmount Keyboard with USB SE/FI

1U Rackmount Keyboard with USB SWI

1U Rackmount Keyboard with USB PORT

1U Rackmount Keyboard with USB BEL

1U Rackmount Keyboard with USB JPN2

1U Rackmount Keyboard with USB RUS

1U Rackmount Keyboard with USB INTL

NOTE: HP's second generation rackmount keyboard combines a full size keyboard with touch pad in a 1U format with room to mount an HP KVM Switch behind it. The 1U Rackmount Keyboard includes a three button touch pad,

4 scroll keys, and Windows shortcut keys. The 1U Rackmount Keyboard also provides PS2 and USB connectivity and a USB port on the front of the keyboard for USB pass through with compatible KVM switches

AG072A

AG073A

AG074A

AG075A

AG076A

AG077A

AG078A

AG079A

AG080A

AG081A

AG082A

AG083A

AG084A

AG085A

AG086A

TFT7600 Rackmount Keyboard and Monitor

TFT7600 Rackmount Keyboard and Monitor US

TFT7600 Rackmount Keyboard and Monitor UK

TFT7600 Rackmount Keyboard and Monitor GR

TFT7600 Rackmount Keyboard and Monitor FR

TFT7600 Rackmount Keyboard and Monitor IT

TFT7600 Rackmount Keyboard and Monitor SP

TFT7600 Rackmount Keyboard and Monitor DEN

TFT7600 Rackmount Keyboard and Monitor NOR

TFT7600 Rackmount Keyboard and Monitor SE/FI

TFT7600 Rackmount Keyboard and Monitor SWI

TFT7600 Rackmount Keyboard and Monitor PORT

TFT7600 Rackmount Keyboard and Monitor BEL

TFT7600 Rackmount Keyboard and Monitor JPN2

TFT7600 Rackmount Keyboard and Monitor RUS

TFT7600 Rackmount Keyboard and Monitor INTL

Depth Adjustable Fixed Rail Kit

Depth Adjustable Fixed Rail Kit

NOTE: The kit contains two, 19" to 31", depth adjustable rails that mount HP rack-mountable servers, storage boxes, UPSs, and HP networking products in third-party racks. The Depth Adjustable Fixed Rail Kit also allows for most third-party, rack-mountable products to be mounted in HP Racks. The depth adjustable fixed rails have a maximum weight capacity of 300 lb (136 kg).

AG052A

AG053A

AG054A

AG055A

AG056A

AG057A

AG058A

AG059A

AG060A

AG061A

AG062A

AG063A

AG064A

AG065A

AG066A

332558-B21

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 3

QuickSpecs

HP Rack Accessories

QuickSpecs

Universal 1U Filler Panels (Carbon Graphite)

HP 10pk Carbonite 1U Universal Filler Panel

HP 100pk Carbonite 1U Universal Filler Panel

NOTE: The blanking panels are made from high grade molded plastic, and are designed to be installed without tools. The use of blanking panels is recommended to ensure proper airflow.

AF070A

AF071A

Sidewall Panel Kits

10642 G2 (42U) Side Panels (set of two) (Graphite Metallic)

10636 G2 (36U) Side Panels (set of two) (Graphite Metallic)

10647 G2 (47U) Side Panels (set of two) (Graphite Metallic)

NOTE: The 14U and 22U racks ship with side panels installed standard. Sidewall Panel Kits are optional for all other height racks.

NOTE: The side panels for the 10000 and 10000 G2 series rack are lockable.

Filler Panels

HP 10pk Carbonite 1U Universal Filler Panel

HP 100pk Carbonite 1U Universal Filler Panel

NOTE: The 1U filler panel is designed to prevent hot air recirculation within the rack. This provides the optimum cold air draw for rack mounted systems and reduces your power and cooling costs.

AF054A

AF056A

AF050A

AF070A

AF071A

Rack Stabilization Kits

Ballast Option Kit

NOTE: The Ballast Option Kit is designed to provide additional stability and support when used with the Stabilizer

Kit. It is typically used when very heavy equipment is routinely installed, removed or accessed within the rack.

HP 10K G2 600mm Stabilizer Option Kit (Graphite)

HP 10K G2 600mm Stabilizer Hvy Dty V2 (Graphite)

HP 10K G2 800mm Stabilizer Option Kit (Graphite)

NOTE: All G2 Stabilizers are Supported by the Rack 10000 G2 series only.

NOTE: The stabilizer kit is required for stand-alone 42U and 36U racks (order one kit per Rack). 10000 series stabilizer kits CAN NOT be used on the 9000 series racks.

NOTE: The anti-tip stabilizer kits provide stability and support when equipment is installed, removed or accessed within the rack. Heavy Duty stabilizer kits should be used when a single racked component exceeds 200 lbs. The

600mm wide version is to be used with 10622, 10636, and 10642, and 10647 racks. The 800mm wide version is to be used only with the 10842 rack. The 10KG2 22u racks AF021A and AFO22A ships with

Stabilization kit.

120672-B21

AF062A

AF065A

AF066A

Rack Coupling Kits

Rack Coupling Kit (Carbon)

NOTE: Supported by both the Rack 10000 and Rack 10000 G2 series. Supports 24 in and 600 mm floor tile spacing. The kit is used to join two or more 10000 series racks of the same height together in minutes to create a multi-bay configuration.

248929-B21

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 4

QuickSpecs

HP Rack Accessories

QuickSpecs

Offset Baying Kit

9000/10000 Offset Baying Kit (42U)

NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks.

248931-B21

AF074A

Grounding Kit

HP Rack Grounding Kit (Carbon)

NOTE: Supported by the Rack 10000 and Rack 10000 G2 series.

10000 G2 Series Front Doors

HP 10636 G2 Front Door ALL (Carbon)

HP 10642 G2 Front Door ALL (Carbon)

NOTE: Doors are included in all HP 10000 G2 Series racks. G2 doors are made available for customers that wish to swap the previous 10000 Series door for the new rack door model for uniformity of appearance in the datacenter.

NOTE: Kits may be retro-fitted to 10000 Series Racks.

HP Monitored Power Distribution Unit - Full Rack Version

HP 17.3 kVA S2324 Monitored PDU- dual input, 3Ø24A (NA/JPN)

HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A (NA/JPN)

HP 16.6 kVA S2140 Monitored PDU- dual input, 1Ø, 40A (NA/JPN)

HP 8.3 S1140 Monitored PDU- single input, 1Ø, 40A (NA/JPN)

HP 22.1 kVA S2316 Monitored PDU- dual input, 3Ø, 16A (INTL)

HP 11 kVA S1316 Monitored PDU- single input, 3Ø, 16A (INTL)

HP 14.7 kVA S2132 Monitored PDU- dual input, 1Ø, 32A (INTL)

HP 7.3 kVA S1132 Monitored PDU- single input, 1Ø, 32A (INTL)

NOTE: "Ø" = number of electrical phases at input.

HP Monitored Power Distribution Unit - Half Rack Version

HP 17.3 kVA S348 Monitored PDU- single input, 3Ø, 48A (NA/JPN)

HP 22 kVA S332 Monitored PDU- single input, 3Ø, 32A (INTL)

HP 4.9 kVA S124 Monitored PDU- single input, 1Ø, 24A (NA/JPN)

HP 7.3 kVA S132 Monitored PDU- single input, 1Ø, 32A (INTL)

NOTE: "Ø" = number of electrical phases at input.

AF019A

AF009A

AF503A

AF504A

AF505A

AF506A

AF507A

AF508A

AF509A

AF510A

AF916A

AF917A

AF914A

AF915A

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 5

QuickSpecs

HP Rack Accessories

QuickSpecs

HP KVM Switch Options

2x1x16 IP Console Switch with Virtual Media

4x1x16 IP Console Switch with Virtual Media

2x16 Server Console Switch with Virtual Media

PS/2 Virtual Media Interface Adapter, 1 pack

NOTE: Requires PS/2 and one USB port on server.

HP Server console switch 0x2x8

HP Server console switch 0x2x16

PS/2 Interface Adapter - 1 pack

PS/2 Interface Adapter - 8 pack

USB Interface Adapter - 1 pack

Serial Interface Adapter - 1 pack with power supply

NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/kvm

HP 1x 4 Server Console Switch (ALL)

PS2 Server Console Cable, 6 ft, 2 pack

USB Server Console Cable, 6 ft, 2 pack

NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm

AF601A

AF602A

AF600A

AF604A

AF616A

AF617A

262588-B21

262587-B21

336047-B21

373035-B21

AF611A

AF612A

AF613A

HP Serial Console Server Options

HP 16 Port Serial Console Server (worldwide)

HP 48 Port Serial Console Server (worldwide)

Serial Adapter, RJ45-D89 DCE Female, 1 Pack

Serial Adapter, RJ45-D89 DCE Female, 8 Pack

NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/kvm

NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm

HP Cable Management Kits

Cable Management "D" Ring (10 pack)

NOTE: This kit consists of 10 "D" rings that can be used in addition to the rings that ship standard in the 10000 series and 10000 G2 series racks for cable management.

HP Hook and Loop Strips (50 pack)

HP Rack Cable Management Kit

NOTE: This kit provides an easy way to organize and route cables within HP Racks. Cable clips, cable rings, and

1U and 2U access panels are included.

168233-B21

379820-B21

AF099A

Service and Support Offerings (HP Care Pack Services)

Hardware Onsite Installation (Electronic) U2871E

AF101A

AF102A

AF103A

AF110A

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 6

QuickSpecs

Service and Support, HP Care Pack, and Warranty Information

HP Rack Accessories

Service and Support

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

Installation and start up

Education courses

Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair

Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMware-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.

System Management, Performance Services and Mission Critical Support Solution

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide

Web site on the internet at: http://www.hp.com/hps/carepack

NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps

NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

NOTE: For additional information on Server Services, Rack and Power Options, please visit: http://h20219.www2.hp.com/services/cache/111072-0-0-225-121.html

NOTE: The information contained herein is subject to change without notice and is provided "as is" without warranty of any kind.

NOTE: The warranties for HP products and services are set forth in the express limited warranty statements accompanying such products and services.

NOTE: Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Environment-friendly End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling

Products and Approach and Recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.

Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2009 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA - 10247 Worldwide QuickSpecs — Version 46 — 4.27.2009

Page 7