SureLIGHT™MLTGF DataGuard™ SWA Fibre Optic Cable

SureLIGHT™MLTGF DataGuard™ SWA Fibre Optic Cable
SureLIGHT™ MLTGF DataGuard™ SWA Fibre Optic Cable
Cable Construction
Mechanical Characteristics
Loose Tube:
Thermoplastic material (PBT), jelly filled
Tensile strength (max.)
*E1A
4000 N
Fibre Colour Code:
IEC 60304
Crush resistance
*E3
4000 N/10cm
Tubes Colour Code:
1 - Red / 2 - Green - others White
Impact resistance
*E4
3 impacts (w/20N.m)
Cable Core:
Loose tubes are stranded
around a central strength member
Min. bending radius
*E11A
15 x Ø
*E11B
25 x Ø (load)
Strength member:
Waterblocking aramid yarns
*F5
Inner Jacket:
Black LSZH FireFighter™
Moisture resistance
passed
Metallic Armour:
Galvanised Steel Wire Armour (SWA)
Compound flow
*E14
30cm/24h/70˚C passed
Tape:
Water-swellable tape
Outer Jacket: Black LSZH FireFighter™ UV Stable
Storage
-40˚C to +70˚C
Installation
-5˚C to +50˚C
Operating
-30˚C to +70˚C
Thermal Characteristics
Temperature range *F1
Fire behaviour
Flammability
EN 50266-1, EN 50266-2-2
Smoke density
EN 50267-1, EN 50267-2-2, EN50267-2-3
Acid gases
EN 61034-1, EN 61034-2
Part Number
No. of fibres
Tube Diameter (mm)
Nominal Ø (mm)
Cable Weight (kg/km)
1410*244MLT-01
24
2.3 ± 0.05
13.1 ± 0.5
316
1410*364MLT-01
36
2.3 ± 0.05
13.1 ± 0.5
316
1410*484MLT-01
48
2.3 ± 0.05
13.1 ± 0.5
316
*denotes fibre type required 1 = 62.5/125 | 2 = 50/125 | 8 = 9/125
* IEC 60794-1-2
Note: When installing or assembly under temperature below -5˚C the cable has to be stored at 20˚C for at least 24 hours before installation.
Page 1/2
The cable images represented on this specification are indicative only and may be subject to change at Belcom’s discretion. All
values represented in this specification should be used as a guide only and exact details can be confirmed at point of enquiry.
T: 01279 871150 | F: 01279 871129 | www.belcom.co.uk
Optical Characteristics
Multi Mode Fibre
Fibre Type
@ 850 nm
Bandwidth (overfilled launch)
@ 1300 nm
@ 850 nm
Bandwidth (laser EMB)3)
@ 1300 nm
1 Gbps Ethernet operation link length
10 Gigabit Ethernet link lengths
Attenuation (Typical/Maximum)
Mhz.km
Mhz.km
@ 850 nm
@ 1300 nm
@ 850 nm
@ 850 nm
@ 1300 nm
(m)
(m)
dB/km
62.5/125 µm
OM1
50/125 µm
OM2
50/125 µm
OM3
50/125 µm
OM4
≥ 220
≥ 500
≥ 1500
≥ 3500
≥ 600
≥ 500
≥ 500
≥ 500
-
-
≥ 2000
≥ 4700
-
-
≥ 500
≥ 500
≤ 300
500
-
-
≤ 500
550)2
-
-
≤ 300
550
2.6 / 3.0
2.4 / 3.0
2.0 / 3.0
2.0 / 3.0
)1
0.5 / 1.0
0.7 / 1.2
0.5 / 1.0
0.5 / 1.0
Numerical Aperture
µm
0.275 ± 0.015
0.20 ± 0.015
0.20 ± 0.015
0.20 ± 0.015
Core Diameter
µm
62.5 ± 2.5
50.0 ± 2.5
50.0 ± 2.5
50.0 ± 2.5
Cladding Diameter
µm
125 ± 1.0
125 ± 1.0
125 ± 1.0
125 ± 1.0
Coating Diameter
µm
245 ± 10
245 ± 10
245 ± 10
245 ± 10
1 - serial Laser 1000BA SE-SX
2 - serial Laser 1000BA SE-LX
3 - Effective modal Bandwidth per TIA/EIA-492AAAC and draft IEC 60793-2-10 type A1a.2, ensured by DMD performance specifications for sources
meeting launch conditions specified in 10Gbit Ethernet (IEEE 802.3a), OIF OC-192/STM-64 VSR-4-04, and 10 Gbit Fibre Channel (10GFC)
Single Mode Fibre
9/125 µm OS2
G.652D - ZWP
Fibre Type
@ 1310 nm
Attenuation (Typical/Maximum)
@ 1550 nm
0.31 / 0.35
dB/km
@ 1625 nm
Mode Field Diameter
Chromatic Dispersion
Cable Cut-off Wavelength
@ 1310 nm
@ 1550 nm
@ 1285 - 1330 nm
@ 1550 nm
0.20 / 0.24
0.21 / 0.26
µm
ps/(nm.km)
9.24 ± 0.4
10.4 ± 0.5
≤ 3.5
≤ 18
nm
≤ 1260
Zero Dispersion Wavelength
nm
1302 - 1322
Fibre PMD Individual fibre
ps/√km
0.1
Cladding Diameter
µm
125 ± 0.7
Coating Diameter
µm
245 ± 10
Page 2/2
The cable images represented on this specification are indicative only and may be subject to change at Belcom’s discretion. All
values represented in this specification should be used as a guide only and exact details can be confirmed at point of enquiry.
T: 01279 871150 | F: 01279 871129 | www.belcom.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement